STW8019 datasheet(17/55 Pages) STMICROELECTRONICS

Nome de Peças	STW8019

Descrição Electrónicos	Mobile Video DENC

PDF	55 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

17 / 55 page

STw8009/STw8019

Functional description

17/55

Transition from Active mode to Sleep mode

In Sleep mode, DENC is not powered on. When Suspend signal changes from « 0 » to

« 1 », the device goes from Active to Sleep mode and an internal Reset signal is generated

by the Control Power Unit management to the DENC part. This signal has a 6 pixclk

duration (pixclk = 27 MHz).

Transition between Standby and Active modes

Transitions between these two modes are applied by software configuration through I2C

interface.

Supply management

At power up, supplies must be applied according to the following sequence:

VddIO1, VddIO2 (1.8 V) then,

Vdd (1.2 V) then,

VccA1, VccA2, VccA3, VccA4 (2.8 /3.3 V)

and removed according to the following sequence:

VccA1, VccA2, VccA3, VccA4 (2.8 /3.3 V) then,

Vdd (1.2 V) then,

VddIO1, VddIO2 (1.8 V)

4.13

JTAG interface

To ease the integration of STw8009/STw8019 in its system application, a JTAG interface is

available.

STW8019 Folha de dados(PDF) 17 Page - STMicroelectronics