R7K4JML3-E-DAFC64A-R datasheet(4/9 Pages) MSYSTEM

4 / 9 page

MODEL: R7K4JML3-E-DAFC64A

R7K4JML3-E-DAFC64A SPECIFICATIONS

ES-8003-A Rev.1 Page 4/9

http://www.m-system.co.jp/

■POWER SUPPLY TERMINAL ASSIGNMENT

1 2 3 4 5

1. FE

2. NC

3. NC

4. +24V

5. 0V

Functional Earth

—

Power Input (24V DC)

Power Input (0V)

Applicable connector: TFMC1,5 / 5–STF–3,5(Phoenix Contact)

(included in the package)

Applicable wire size: 0.2 − 1.5 mm2; stripped length 10 mm

Recommended solderless terminal

• AI0,25-10YE 0.25 mm2 (Phoenix Contact)

• AI0,34-10TQ 0.34 mm2 (Phoenix Contact)

• AI0,5-10WH 0.5 mm2 (Phoenix Contact)

• AI0,75-10GY 0.75 mm2 (Phoenix Contact)

• A1-10 1.0 mm2 (Phoenix Contact)

• A1,5-10 1.5 mm2 (Phoenix Contact)

MECHATROLINK RELATED COMMANDS

Commands available with this unit are the following.

PROFILE

COMMAND

CODE

FUNCTION

Common command

NOP

00H

No operation command

ID_RD

03H

Read ID command

CONFIG

04H

Setup device command

ALM_RD

05H

Read alarm or warning command

ALM_CLR

06H

Clear alarm or warning command

CONNECT

0EH

Establish connection command

DISCONNECT

0FH

Release connection command

Standard I/O pro le

DATA_RWA

20H

Transmit I/O data

RESPONSE TIME

Response time of discrete input module is the time till when the communication ASIC of the module transmits input data from

when input signal is applied to the module.

Response time of discrete output module is the time till when the module output the signal from when output data is received

by the communication ASIC of the module.

TCOM: MECHATROLINK-III transmission cycle set at master

(depends on system and configuration)

TINP: Response of input module ≤ Delay of input circuit (Ta, ON delay time or OFF delay time) + Acquire cycle (Ts) + input

internal processing delay time (Tc, two transmission cycle)

TOUT: Response of output module ≤ Output internal processing delay time (Td, one minimum transmission cycle the unit can

handle) + Conversion time (Te) + Delay of output circuit (Tf, ON delay time or OFF delay time)

E.g. 1: R7K4JML3-E-DAFC64A: Acquire cycle: 0.1 msec., MECHATROLINK-III transmission cycle: 0.125 msec., discrete input ON

Response of input module (TINP): Delay of input circuit (0.2 msec.) + Acquire cycle (0.1 msec.) + input internal processing

delay time (0.125 msec. x 2) = 0.55 [msec.]

R7K4JML3-E-DAFC64A-R Folha de dados(PDF) 4 Page - M-System Co.,Ltd.

R7K4JML3-E-DAFC64A-R Folha de dados(HTML) 4 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9

Folha de dados Download

Ligação URL