R7D-CT4E-R datasheet(7/46 Pages) MSYSTEM

7 / 46 page

MODEL: R7C

R7C SPECIFICATIONS

ES-7801 Rev.26 Page 7/46

http://www.m-system.co.jp/

I ENGINEERING UNIT CONVERSION

Engineering unit value °C or K is multiplied by 10 and expressed in 16 bits. °F data is represented in engineering unit

value, without multiplication. Engineering unit value A is multiplied by 100 or 1000, expressed in 16 bits. Negative value

is represented in 2 s complements.

• Input TYPE K Thermocouple

≤ -272°C

-150°C

1370°C

≥ 1472°C

Input Value

-2720

-1500

13700

14720

Converted Data, Decimal

F560

FA24

3584

3980

Converted Data, Hex

14720 (3980)

13700 (3584)

-272 -150

-1500 (FA24)

-2720 (F560)

1370

1472

(°C)

■ COUNT VALUE

The count value is 32-bit data. It is divided in 2 words of 16 bits represented with 2 addresses.The lower address is

allocated in the lower word (LSB) and the upper address in the upper word (MSB). The count value is 0 - 4 294 967 295.

The maximum count value available is 1 000 - 4 294 967 295. In case of overflow, the vaule is reset to 0 or 1

(configurable) from which the count will restart. The preset of the count value is also available. Use the R7CON or

commands for the configuration.

R7D-CT4E-R Folha de dados(PDF) 7 Page - M-System Co.,Ltd.