R3-PD16ASSLASHCE datasheet(2/7 Pages) MSYSTEM

2 / 7 page

MODEL: R3-PD16A

R3-PD16A SPECIFICATIONS

ES-8397 Rev.6 Page 2/7

https://www.m-system.co.jp/

Maximum load current: 0.1 A per point

Maximum rush current: 0.5 A for max. 10 msec.

Maximum leak current at OFF: 0.1 mA

Maximum voltage drop at ON: 0.6 V DC typical; 1.2 V DC

max.

(When driving an inductive load, connect a diode in parallel

with the load.)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

PERFORMANCE

Output ON time accuracy:

±10 % for 1 sec. or less setting;

±0.1 sec. for 1 sec. or more setting

Data allocation: 1

Current consumption: 100 mA

Response time: ≤ 0.1 sec. (delay)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■OUTPUT HOLD or OUTPUT OFF

In normal conditions, the module outputs the signal from

the preferred bus A.

When an error is detected, the output is switched to the

data from the bus B.

• Output Hold

If both are in error, the module holds the signal and stands

by until one of the communications recovers.

• Output OFF

If both are in error, the module outputs OFF signals and

stands by until one of the communications recovers.

At the startup, it outputs OFF until the communication is

established and normal data is received.

R3-PD16AS/CE Folha de dados(PDF) 2 Page - M-System Co.,Ltd.

R3-PD16AS/CE Folha de dados(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7

Folha de dados Download

Ligação URL