M2XT2-4V1-R datasheet(2/5 Pages) MSYSTEM

2 / 5 page

MODEL: M2XT2

M2XT2 SPECIFICATIONS

ES-5062 Rev.16 Page 2/5

http://www.m-system.co.jp/

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

RELATED PRODUCTS

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -15 to +115 %

(Negative current output is not provided.)

Manual zero/span adjustments: See Front View.

Programming: Downloaded from PC; T/C type, temp. range,

output range, zero and span, simulating output, etc.

Burnout protection: Upscale standard; downscale or no

burnout optional by programming

(Set to "no burnout" when the unit is connected with

another instrument in parallel.)

Linearization: Standard

Cold junction compensation: CJC sensor attached to the

input terminals

Status indicator LED: Blinking patterns indicate different

operating status of the transmitter.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min.

Burnout sensing: 45 nA ±10 %

If not specified, the input range is shown below.

1 PR: 0–1600°C

2 K: 0–1000°C

3 E: 0–500°C

4 J: 0–500°C

5 T: 0–300°C

6 B: 0–1800°C

7 R: 0–1600°C

8 S: 0–1600°C

9 C: 0–2000°C

N N: 0–1000°C

U U: 0–300°C

L L: 0–500°C

P P: 0–1200°C

OUTPUT SPECIFICATIONS

■ DC Current

Operational range: 0 – 24 mA DC

Output range: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 15 V max.

(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Code V1 (narrow spans)

Operational range: -3 – +3 V DC

Output range: -2.5 – +2.5 V DC

Minimum span: 250 mV

Code V2 (wide spans)

Operational range: -11.5 – +11.5 V DC

Output range: -10 – +10 V DC

Minimum span: 1 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V1: 0 – 1 V DC

V2: 1 – 5 V DC

INSTALLATION

Power Consumption

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 2 W

Operating temperature: -30 to +60°C (-22 to +140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 120 g (0.26 lb)

M2XT2-4V1-R Folha de dados(PDF) 2 Page - M-System Co.,Ltd.

M2XT2-4V1-R Folha de dados(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5

Folha de dados Download

Ligação URL