Plastic and Rubber Instant Adhesives

PR40 • PR100 • PR600 • PR1500 • PR Gel

Storage

For short term storage (<30 days), keep adhesive in a cool (60°F to 80°F [16°C to

27°C]), dry place out of direct sunlight. Keep containers tightly covered and free of

moisture. Refrigeration (40°F [4°C]) gives optimum long term storage stability.

Shelf Life

3M™ Scotch-Weld™ Plastic and Rubber Instant Adhesives can be expected to have

a shelf life of one year from the date of shipment from 3M when stored under

refrigerated conditions.

Precautionary

Information

Refer to Product Label and Material Safety Data Sheet for health and safety information

before using this product. For additional health and safety information, call 1-800-364-3577

or (651) 737-6501.

Technical Information

The technical information, recommendations and other statements contained in this

document are based upon tests or experience that 3M believes are reliable, but the accuracy

or completeness of such information is not guaranteed.

Product Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can

affect the use and performance of a 3M product in a particular application. Given the

variety of factors that can affect the use and performance of a 3M product, user is solely

responsible for evaluating the 3M product and determining whether it is fit for a particular

purpose and suitable for user’s method of application.

Warranty,

Limited Remedy,

and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product

packaging or product literature, 3M warrants that each 3M product meets the applicable

3M product specification at the time 3M ships the product. 3M MAKES NO OTHER

WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY

IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF

DEALING, CUSTOM OR USAGE OF TRADE.

If the 3M product does not conform to this warranty, then the sole and exclusive

remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase

price.

Limitation of Liability

Except where prohibited by law, 3M will not be liable for any loss or damage arising from

the 3M product, whether direct, indirect, special, incidental or consequential, regardless of

the legal theory asserted, including warranty, contract, negligence or strict liability.

ISO 9001: 2000

This product was manufactured under a quality system registered to ISO 9001: 2000 standards.

3

Industrial Adhesives and Tapes Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

800-362-3550 • 877-369-2923 (Fax)

www.3M.com/structuraladhesives

- 4 -

3M and Scotch-Weld are trademarks of

3M Company.

Santoprene is a registered trademark of

ExxonMobil Chemical.

Viton is a registered trademark of

E.I. DuPont de Nemours Co.

©3M 2010