Data Sheet

ADP1032

Rev. 0 | Page 7 of 37

REGULATORY INFORMATION

See Table 9 and the Insulation Lifetime section for the recommended maximum working voltages for specific cross isolation waveforms

and insulation levels.

Table 3. Safety Certifications

UL (Pending)

CSA (Pending)

VDE (Pending)

Recognized Under UL 1577

Component Recognition Program

Approved under CSA Component Acceptance Notice 5A

Certified according to DIN V VDE V

0884-10 (VDE V 0884-10):2006-12

2500 V rms Single Protection

CSA 60950-1-07+A1+A2 and IEC 60950-1, second edition,

CSA 61010-1-12 and IEC 61010-1 third edition: basic

ELECTROMAGNECTIC COMPATIBILITY

Table 4.

Regulatory Body

Standard

Comment

SGS-CCSR

CISPR11 Class B

Pending

INSULATION AND SAFETY RELATED SPECIFICATIONS

Table 5.

Parameter

Symbol

Test Conditions/Comments

Value

Unit

Rated Dielectric Insulation Voltage

1 minute duration

2500

V rms

Minimum External Air Gap (Clearance)

Field Power Domain to Master Domain

Measured from field power pins and pads to master

pins and pads, shortest distance through air

2.15

mm min

Field Power Domain to Slave Domain

Measured from field power pins and pads to slave pins

and pads, shortest distance through air

2.15

mm min

Master Domain to Slave Domain

Measured from master pins and pads to slave pins and

pads, shortest distance through air

2.15

mm min

Minimum External Tracking (Creepage)

Field Power Domain to Master Domain

Measured from field power pins and pads to master

pins and pads, shortest distance path along body

2.15

mm min

Field Power Domain to Slave Domain

Measured from field power pins and pads to slave pins

and pads, shortest distance path along body

2.15

mm min

Master Domain to Slave Domain

Measured from master pins and pads to slave pins and

pads, shortest distance path along body

2.15

mm min

Minimum Internal Gap (Internal Clearance)

Insulation distance through insulation

18

µm min

Tracking Resistance (Comparative Tracking Index)

CTI

DIN IEC 112/VDE 0303, Part 1

>400

V

Material Group

Material group (DIN VDE 0110, 1/89, Table 1)

II