STM8S datasheet(25/467 Pages) STMICROELECTRONICS

Nome de Peças	STM8S

Descrição Electrónicos	STM8S Series and STM8AF Series 8-bit microcontrollers

PDF	467 Pages

Scroll/Zoom	100%

Fabricante Electrônico	STMICROELECTRONICS [STMicroelectronics]

Página de início	http://www.st.com

Logo

25 / 467 page

DocID14587 Rev 14

25/467

RM0016

Central processing unit (CPU)

Figure 2. Stacking order

Condition code register (CC)

The condition code register is an 8-bit register which indicates the result of the instruction

just executed as well as the state of the processor. The 6th bit (MSB) of this register is

reserved. These bits can be individually tested by a program and specified action taken as a

result of their state. The following paragraphs describe each bit:

•

V: Overflow

When set, V indicates that an overflow occurred during the last signed arithmetic operation,

on the MSB result bit. See the INC, INCW, DEC, DECW, NEG, NEGW, ADD, ADDW, ADC,

SUB, SUBW, SBC, CP, and CPW instructions.

•

I1: Interrupt mask level 1

The I1 flag works in conjunction with the I0 flag to define the current interruptability level as

shown in Table 1. These flags can be set and cleared by software through the RIM, SIM,

HALT, WFI, IRET, TRAP, and POP instructions and are automatically set by hardware when

entering an interrupt service routine.

STM8S Folha de dados(PDF) 25 Page - STMicroelectronics