PCF2127TSLASH2Y datasheet(21/100 Pages) PHILIPS

Nome de Peças	PCF2127T/2Y

Descrição Electrónicos	Accurate RTC with integrated quartz crystal for industrial applications

PDF	100 Pages

Scroll/Zoom	100%

Fabricante Electrônico	PHILIPS [NXP Semiconductors]

Página de início	http://www.nxp.com

Logo

21 / 100 page

PCF2127

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 8 — 19 December 2014

21 of 100

NXP Semiconductors

PCF2127

Accurate RTC with integrated quartz crystal for industrial applications

8.6.1.2

Direct switching mode

If VDD > VBAT: Voper(int) is at VDD potential.

If VDD < VBAT: Voper(int) is at VBAT potential.

The direct switching mode is useful in systems where VDD is always higher than VBAT.

This mode is not recommended if the VDD and VBAT values are similar (for example,

VDD = 3.3 V, VBAT  3.0 V). In direct switching mode, the power consumption is reduced

compared to the standard mode because the monitoring of VDD and Vth(sw)bat is not

performed.

8.6.1.3

Battery switch-over disabled: only one power supply (VDD)

When the battery switch-over function is disabled:

• The power supply is applied on the VDD pin

• The VBAT pin must be connected to ground

• Voper(int) is at VDD potential

• The battery flag (BF) is always logic 0

Fig 7.

Battery switch-over behavior in direct switching mode with bit BIE set logic 1

(enabled)

PCF2127T/2Y Folha de dados(PDF) 21 Page - NXP Semiconductors