Technical

Data Sheet

© 2008 Belden, Inc

All Rights Reserved.

Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without

notice, and the listing of such information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages

(including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

10/12/12 REV. 1

133109A

I.

DESCRIPTION

FOUR 22 AWG (7X30) TINNED COPPER FOAM HIGH DENSITY POLYETHYLENE

INSULATED TWISTED PAIRS WITH OVERALL BELDFOIL® AND 65% TINNED COPPER

BRAID SHIELD, 22 AWG TINNED COPPER DRAIN WIRE, BLACK PVC JACKET,

GALVANIZED STEEL INTERLOCKED ARMOR, OVERALL PVC JACKET.

II.

ELECTRICAL CHARACTERISTICS

MAX. OPERATING VOLTAGE

300 V RMS

MAX. CONTINUOUS CURRENT PER

CONDUCTOR @ 25 DEG. C

2.7 A

NOM. CAPACITANCE BETWEEN

CONDUCTORS @ 1 KHZ

11.0 PF/FT.

NOM. CAPACITANCE CONDUCTOR TO

SHIELD @ 1 KHZ*

20.9 PF/FT.

NOM. IMPEDANCE @ 1MHZ

120 OHMS

NOM. CONDUCTOR DC RESISTANCE

@ 20 DEG. C

14.7 OHMS/1000’

NOM. SHIELD DC RESISTANCE

@ 20 DEG. C

1.4 OHMS/1000’

NOM. VELOCITY OF PROPAGATION

78%

NOM. ATTENUATION @ 1 MHZ.

.5 DB/100’

*ONE CONDUCTOR TO OTHER CONDUCTOR AND SHIELD

III.

PHYSICAL CHARACTERISTICS

TEMPERATURE RATING

-20°C TO +60°C

INSULATION MATERIAL

DATALENE

INNER JACKET MATERIAL

PVC

SUNLIGHT RESISTANCE:

PASSES UL1581, 720 HOURS

TYPE SHIELD AND % COVERAGE

BELDFOIL®/BRAID; 100%/65%

APPLICABLE SPECIFICATIONS

UL PLTC & CM

(CORE ONLY)

CSA CM

NOM. DIAMETER (CORE)

.457"

A STEEL INTERLOCKED ARMOR AND PVC JACKET ARE APPLIED OVER THE BELDEN CORE.

DIAMETER OVER ARMOR

.657" AVG.

DIAMETER OVER PVC JACKET

.757" AVG.

MIN. BENDING RADIUS

9.1”

MAX. PULLING TENSION

250 LBS.

SPECIFICATIONS

NEC TYPE PLTC, TYPE CM

CEC TYPE CMG, HLBCD

FLAME RATING

UL1685 VERTICAL TRAY

FLAME TEST

CSA FT4

IV.

COLOR CODE

1) WHITE/BLUE STRIPE & BLUE/WHITE STRIPE

2) WHITE/ORANGE STRIPE & ORANGE/WHITE STRIPE

3) WHITE/GREEN STRIPE & GREEN/WHITE STRIPE

4) WHITE/BROWN STRIPE & BROWN/WHITE STRIPE