Electronic Pressure Switch

PAC50

© TT electronics plc

Issue A

07/2018 Page 1

TT Electronics | Roxspur Measurement & Control

2 Downgate Drive, Sheffield, South Yorkshire, S4 8BT, UK |Ph: +44 (0) 114-244-2521

www.ttelectronics.com | RoxspurSales@ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Description:

For improved monitoring of air pressure, the PAC50 electronic pressure switch offers more at a glance – the large bi-color

display allows you to identify from a distance if the pressure falls within the target range. Three large function keys and

intuitive menu navigation make operating the PAC50 easy.

What makes the PAC50 so special? It offers up to two digital switching outputs and an optional analog output in just one

device. The output signals can be easily adjusted to the available control system. Thanks to the optional IO-Link, the

controller or PLC can quickly and accurately pass the device parameters to the sensor when changing the format or

replacing the sensor, which significantly reduces downtime.

The PAC50 is ideal for use in industrial environments due to its waterproof housing with an IP 65/IP 67 enclosure rating.

Applications:



Compressed-air monitoring and measurement in machines and systems



Pressure measurement in air and in dry, non-corrosive gases



Pressure measurement on compressed-air maintenance units



Vacuum monitoring in handling and robotics applications

Features:



Electronic pressure switch for pneumatic applications



Three large function keys and intuitive menu navigation



Measuring range from gauge pressure (vacuum and overpressure)



Individually programmable switching outputs and optional analog

output



Installation on a mounting rail, wall or in a control panel

Device type

Pressure switch

Measuring ranges

Gauge pressure

–1 bar ... 0 bar, –1 bar ... +1 bar, 0 bar ... +6 bar, 0 bar ... +10 bar, –1 bar ... 10

bar

Pressure unit

Bar, MPa, psi and kg/cm

2

Accuracy

≤ ± 1.5 % of the span

Setting accuracy of switching outputs

≤ ± 2.0 % of span

Output signal

Configurable switching outputs PNP, NPN or push-pull analog output signal

plus optional IO-Link

Electrical connection

Round connector M12 x 1

Technical Data Overview