Programming the Audible Tower Module

USB-USBM-1

To PC

To prepare for programming the audible module, download the Banner Audio GUI from

www.bannerengineering.com. Save the

program to the desired location on your computer.

Note: During programming, external power must be removed from the audible module.

To program the module:

1. Remove the module top cover by rotating counterclockwise.

2. Connect programming cable (USB-USBM-1) from computer USB connection, to USB mini connection of the audible

module.

3. Select Banner Audio GUI on your computer. Select "Add File" on the GUI, to choose the desired MP3 or WAV file, then

select "Open".

4. Select "Write" to program the desired file. You will receive a message "Write Success", when the new audible file has

been installed.

5. Remove the cable from the audible module, and re-install the top cover, by aligning the protruding alignment marks, and

turning clockwise.

6. The audible module is now ready for use.

For additional information, see the Programming Instructions file which is part of the Banner Audio GUI installation. Compatible

with Windows 2000, XP, Vista, Windows 7 and 8.

TL70 Programmable Audible Tower Light Module

2

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 196627 Rev. B