Sales Information

Phone:(425) 353-3010

Fax: (425) 353-4030

SVRGA0508S - 5.0

E-mail: vptsales@vptpower.com

Web: www.vptpower.com

Page 10

SVRGA0508S Series

8.0 STANDARD MICROCIRCUIT DRAWING (SMD) NUMBERS

Standard Microcircuit

Drawing Number

SVRGA0508S Series

Similar Part Number

5962R1321701HXC

5962R1321701HXA

5962R1321701KXC

5962R1321701KXA

SVRGA0508S/H+

SVRGA0508S/H+-E

SVRGA0508S/K

SVRGA0508S/K-E

Do not use the SVRGA0508S Series similar part number for SMD product acquisition. It is listed for reference only. For exact

specifications for the SMD product, refer to the SMD drawing. SMDs can be downloaded from the DLA Land and Maritime (Previously

known as DSCC) website at https://landandmaritimeapps.dla.mil/programs/defaultapps.asp. The SMD number listed above represents

the Federal Stock Class, Device Type, Device Class Designator, Case Outline, Lead Finish and RHA Designator (where applicable).

Please reference the SMD for other screening levels, lead finishes, and radiation levels. All SMD products are marked with a “Q” on the

cover as specified by the QML certification mark requirement of MIL-PRF-38534.

9.0 ORDERING INFORMATION

SVRGA

05

08

S

/K

-

XXX

1

2

3

4

5

6

(1)

Product

Series

(2)

Nominal Input

Voltage

(3)

Output Current

(4)

Number of

Outputs

(5)

(6)

Additional

Screening

Code

SVRGA

05 5 Volts

08 8 Amps

S Single

/EM

/H+

/K

Engineering Model

Class H + PIND

Class K

Contact Sales

1 Contact the VPT Sales Department for availability of Class H (/H) or Class K (/K) qualified products

2 VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer

contract

3 Engineering models utilize only the standard screening specified and are not considered compliant for flight use. These models are intended for low volume engineering

characterization only and have no guarantee regarding operation in a radiation environment. The customer must place the following statement on each line item of their

purchase order(s) for /EM units when ordering engineering models:

“(Customer Name) acknowledges that the /EM unit listed in this line item is not permitted for flight use and will be used for Engineering characterization only.”

Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental

screening and testing, different input voltage, output voltage, power requirements, source inspection, and/or special element evaluation

for space or other higher quality applications.