SPEC NO: DSAJ9197

REV NO: V.5B

DATE: NOV/10/2016

PAGE: 2 OF 5

APPROVED: Wynec

CHECKED: Allen Liu

DRAWN: L.T.Zhang

ERP: 1203009951

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous Flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1. Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

3. Wavelength value is traceable to CIE127-2007 standards.

4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or

premature failure.

Part No.

Emitting Color (Material)

Lens Type

Viewing

Angle [1]

Min.

Typ.

2θ1/2

APT2012ZGC/E

Green (InGaN)

Water Clear

500

700

140

°

Iv (mcd) [2]

@ 20mA

Symbol

Parameter

Emitting Color

Typ.

Max.

Units

Test Conditions

λpeak

Peak Wavelength

Green

520

nm

λD [1]

Dominant Wavelength

Green

525

nm

Δλ1/2

Spectral Line Half-width

Green

35

nm

C

Capacitance

Green

100

pF

Forward Voltage

Green

3.2

4

V

Reverse Current

Green

50

uA

Parameter

Values

Units

Power dissipation

120

mW

DC Forward Current

30

mA

Peak Forward Current [1]

100

mA

Reverse Voltage

5

V

Operating Temperature

-40°C To +85°C

Storage Temperature

-40°C To +85°C

Electrostatic Discharge Threshold (HBM)

450

V

Notes:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static

electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.