Low-Cost, Microprocessor

SGM706

Supervisory Circuit

2

DECEMBER 2017

SG Micro Corp

www.sg-micro.com

PACKAGE/ORDERING INFORMATION

MODEL

RESET

THRESHOLD (V)

PACKAGE

DESCRIPTION

ORDERING

NUMBER

PACKAGE

MARKING

PACKAGE

OPTION

SGM706

4.65

SOIC-8

SGM706-LYS8G/TR

SGM706-LYS8

XXXXX

Tape and Reel, 4000

4.40

SOIC-8

SGM706-MYS8G/TR

SGM706-MYS8

XXXXX

Tape and Reel, 4000

4.0

SOIC-8

SGM706-JYS8G/TR

SGM706-JYS8

XXXXX

Tape and Reel, 4000

3.08

SOIC-8

SGM706-TYS8G/TR

SGM706-TYS8

XXXXX

Tape and Reel, 4000

2.93

SOIC-8

SGM706-SYS8G/TR

SGM706-SYS8

XXXXX

Tape and Reel, 4000

2.93

MSOP-8

SGM706-SYMS8G/TR

SGM706S

YMS8

XXXXX

Tape and Reel, 4000

2.63

SOIC-8

SGM706-RYS8G/TR

SGM706-RYS8

XXXXX

Tape and Reel, 4000

NOTE: XXXXX = Date Code and Vendor Code.

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If

you have additional comments or questions, please contact your SGMICRO representative directly.

ABSOLUTE MAXIMUM RATINGS

℃, unless otherwise noted.)

Terminal Voltage (with respect to GND)

GND........................................................................... 20mA

Output Current, (all outputs) ....................................... 20mA

Operating Temperature Range...................... -40

℃ to +85℃

Junction Temperature................................................+150

℃

Storage Temperature................................... -65

℃ to +150℃

Lead Temperature (Soldering, 10s)...........................+260

℃

ESD Susceptibility

HBM............................................................................ 4000V

MM................................................................................ 300V

OVERSTRESS CAUTION

Stresses beyond those listed may cause permanent damage

to the device. Functional operation of the device at these or

any other conditions beyond those indicated in the

operational section of the specification is not implied.

Exposure to absolute maximum rating conditions for

extended periods may affect reliability.

ESD SENSITIVITY CAUTION

This integrated circuit can be damaged by ESD if you don’t

pay attention to ESD protection. SGMICRO recommends that

all integrated circuits be handled with appropriate precautions.

Failure to observe proper handling and installation procedures

can cause damage. ESD damage can range from subtle

performance degradation to complete device failure. Precision

integrated circuits may be more susceptible to damage

because very small parametric changes could cause the

device not to meet its published specifications.

DISCLAIMER

SG Micro Corp reserves the right to make any change in

circuit design, specification or other related things if necessary

without notice at any time.