MP3387A datasheet(4/16 Pages) MPS

4 / 16 page

MP3387A ― 6-STRINGS, MAX 80MA/STRING, STEP-UP, WHITE LED DRIVER

MP3387A Rev. 1.0

www.MonolithicPower.com

5/17/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

VPWMI, VEN, VIN..............................-0.3V to +30V

VCC .............................................-0.3V to +6.5V

VLX, VLED1 to VLED6 ............................-1V to +50V

All other pins ...................................-0.3V to +6V

Junction temperature ................................150°C

Lead temperature .....................................260°C

Continuous power dissipation (TA = 25°C)

(2)

TQFN-24 (4mmx4mm)............................... 2.9W

Recommended Operating Conditions (3)

Supply voltage (VIN)...........................3V to 26V

Operating junction temp........... -40°C to +125°C

Thermal Resistance (4)

θJA

θJC

TQFN-24 (4mmx4mm)…..……42…….9.....°C/W

NOTES:

Exceeding these ratings may damage the device.

The maximum allowable power dissipation is a function of

the maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation produces an excessive die temperature, causing

the regulator to go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

The device is not guaranteed to function outside of its

operating conditions.

Measured on JESD51-7, 4-layer PCB.

MP3387A Folha de dados(PDF) 4 Page - Monolithic Power Systems