3/14

ML62

Note on Use

1. Oscillation may occur as a result of the impedance present between the power supply and the IC’s input. Please use a

capacitor (CIN) of at least 1uF, when the impedance is 10 ohm or more.

With a large output current, Voltage output can be stabilised by increasing capacitor (CIN) size. If CIN is small and

capacitor (CL) size is increased, oscillation may occur. In such cases, Voltage output can be stabilised by either increasing

the size of CIN or decreasing the size of CL.

2. Please ensure that output current (IOUT) is less than Pd / (VIN-VOUT) and does not exceed the stipulated Continuous Total

Power Dissipation value (Pd).

Test Circuit 1

Test Circuit 2