MB90F548GLSPMC datasheet(12/70 Pages) CYPRESS

12 / 70 page

Document Number: 002- 07696 Rev. *A

Page 12 of 70

MB90540G/545G Series

(Continued)

Pin No.

Pin name

Circuit type

Function

LQFP*2

QFP*1

P57

General I/O port. This function is enabled when the 16-bit reload timers 0

disables the output.

TOT0

Output pin for the 16-bit reload timers 0. This function is enabled when the

16-bit reload timers 0 enables the output.

51 to 56

53 to 58

P70 to P75

General I/O ports. This function is always enabled.

IN0 to IN5

Trigger input pins for input captures ICU0 to ICU5. Set the corresponding

Port Direction Register to input if this

function is used.

57 , 58

59 , 60

P76 , P77

General I/O ports. This function is enabled when the OCU disables the

waveform output.

OUT2 , OUT3

Event output pins for output compares OCU2 and OCU3. This function is

enabled when the OCU enables the waveform output.

IN6 , IN7

Trigger input pins for input captures ICU6 and ICU7. Set the corresponding

Port Direction Register to input and disable the OCU waveform output if this

function is used.

59 to 62

61 to 64

P80 to P83

General I/O ports. This function is enabled when 8/16-bit PPG disables the

waveform output.

PPG0 to PPG3

Output pins for 8/16-bit PPGs. This function is enabled when 8/16-bit PPG

enables the waveform output.

63 , 64

65 , 66

P84 , P85

General I/O ports. This function is enabled when the OCU disables the

waveform output.

OUT0 , OUT1

Waveform output pins for output compares OCU0 and OCU1. This function is

enabled when the OCU enables the waveform output.

P86

General I/O port. This function is always enabled.

TIN1

Input pin for the 16-bit reload timers 1. Set the corresponding Port Direction

P87

General I/O port. This function is enabled when the 16-bit reload timers 1

disables the output.

TOT1

Output pin for the 16-bit reload timers 1.This function is enabled when the 16-

bit reload timers 1 enables the output.

67 to 70

69 to 72

P90 to P93

General I/O port. This function is always enabled.

INT0 to INT3

External interrupt request input pins for INT0 to INT3. Set the corresponding

Port Direction Register to input if this function is used.

P94

General I/O port. This function is enabled when CAN0 disables the output.

TX0

TX output pin for CAN0. This function is enabled when CAN0 enables the

output.

MB90F548GLSPMC Folha de dados(PDF) 12 Page - Cypress Semiconductor

MB90F548GLSPMC Folha de dados(HTML) 12 Page - Cypress Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

Folha de dados Download

Ligação URL