FDMF5821 datasheet(2/26 Pages) ONSEMI

2 / 26 page

October 2016

www.onsemi.com

FDMF5821 • Rev. 1.0

FDMF5821

– Smart Power Stage (SPS) Module

with Integrated Temperature Monitor

Features

 Ultra-Compact 5 mm x 5 mm PQFN Copper-Clip

Package with Flip Chip Low-Side MOSFET

 High Current Handling: 60 A

 3-State 5 V PWM Input Gate Driver

 Dynamic Resistance Mode for Low-Side Drive

(LDRV) Slows Low-Side MOSFET during Negative

Inductor Current Switching

 Auto DCM (Low-Side Gate Turn Off) Using

ZCD# Input

 Thermal Monitor for Module Temperature Reporting

 Programmable Thermal Shutdown (P_THDN)

 HS-Short Detect Fault# / Shutdown

 Dual Mode Enable / Fault# Pin

 Internal Pull-Up and Pull-Down for ZCD# and

EN Inputs, respectively

 ON’s PowerTrench® MOSFETs for Clean Voltage

Waveforms and Reduced Ringing

 ON’s SyncFET™ Technology (Integrated Schottky

Diode) in Low-Side MOSFET

 Integrated Bootstrap Schottky Diode

 Optimized / Extremely Short Dead-Times

 Under-Voltage Lockout (UVLO) on VCC

 Optimized for Switching Frequencies up to 1.5 MHz

 PWM Minimum Controllable On-Time: 30 ns

 Low Shutdown Current: < 3 µA

 Optimized FET Pair for Highest Efficiency:

10 ~ 15% Duty Cycle

 Operating Junction Temperature Range:

-40°C to +125°C

 ON’s Green Packaging and RoHS Compliance

Description

The SPS family is ON

’s next-generation, fully optimized,

ultra-compact, integrated MOSFET plus driver power

stage

solution

for

high-current,

high-frequency,

synchronous buck, DC-DC applications. The FDMF5821

integrates a driver IC with a bootstrap Schottky diode,

two power MOSFETs, and a thermal monitor into a

thermally enhanced, ultra-compact, 5 mm x 5 mm

package.

With an integrated approach, the SPS switching power

stage is optimized for driver and MOSFET dynamic

performance, minimized system inductance, and power

MOSFET RDS(ON). The SPS family uses Fairchild's high-

performance

PowerTrench

MOSFET

technology,

which reduces switch ringing, eliminating the need for a

snubber circuit in most buck converter applications.

A driver IC with reduced dead times and propagation

delays further enhances the performance. A thermal

monitor function warns of a potential over-temperature

situation. A programmable thermal shutdown function

turns off the driver if an over-temperature condition

occurs. The FDMF5821 incorporates an Auto-DCM

Mode (ZCD#) for improved light-load efficiency. The

FDMF5821 also provides a 3-state 5 V PWM input for

compatibility with a wide range of PWM controllers.

Applications

 Servers and Workstations, V-Core and Non-V-Core

DC-DC Converters

 Desktop and All-in-One Computers, V-Core and

Non-V-Core DC-DC Converters

 High-Performance Gaming Motherboards

 High-Current DC-DC Point-of-Load Converters

 Networking and Telecom Microprocessor Voltage

Regulators

 Small Form-Factor Voltage Regulator Modules

Ordering Information

Part Number

Current Rating

Package

Top Mark

FDMF5821

60 A

31-Lead, Clip Bond PQFN SPS, 5.0 mm x 5.0 mm Package

5821

FDMF5821 Folha de dados(PDF) 2 Page - ON Semiconductor

FDMF5821 Folha de dados(HTML) 2 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Folha de dados Download

Ligação URL