| Os motores de busca de Datasheet de Componentes eletrônicos |
|
S260G-R Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() DigiKey | ECS-260-8-36B2-CKM-TR | ECS International Inc | CRYSTAL 26.0000MHZ 8PF SMD |
| 6,939 | |
| ECS-260-8-36B2-CKM-TR | ECS International Inc | CRYSTAL 26.0000MHZ 8PF SMD |
| 6,939 | ||
| ECS-260-8-36B2-CKM-TR | ECS International Inc | CRYSTAL 26.0000MHZ 8PF SMD |
| 6,939 | ||
| MTSW-106-24-L-S-260 | JRH ELECTRONICS | CONN HEADER VERT 6POS 2.54MM |
| 876 | ||
| S260 | Switchcraft Conxall | CONN PLUG STEREO 5.23MM 3COND RoHS : Compliant |
| 650 | ||
| AMMLPVBVCS-26.0000 | Abracon Corporation | Oscillator 7050 4-SMD 26MHz 50pp |
| 100 | ||
| 063196LS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 012096RS-26.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 012125LS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 018039RS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 025062LS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 031250LS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 037157RS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 037500RS-26.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 039472LS-26.00-T | Helix Linear Technologies | Trapezoidal Screw |
| 10 | ||
![]() Avnet Americas | MBRS260T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV - Tape and Reel (Alt: MBRS260T3G) RoHS : Compliant |
| 1,240,000 | |
| MURS260-E3/5BT | Vishay Intertechnologies | 2A, 600V, 50NS, SMB UF RECT. SMD - Tape and Reel (Alt: MURS260-E3/5BT) RoHS : Compliant |
| 12,800 | ||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 7,500 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant |
| 5,000 | ||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% - Tape and Reel (Alt: MPZ1608S260ATAH0) RoHS : Compliant |
| 4,000 | ||
| ECS-260-8-36-CKY-TR | ECS International Inc | Crystal Fundamental 26MHz 8pF ?10ppm ?10ppm 4-Pin CSMD T/R - Tape and Reel (Alt: ECS-260-8-36-CKY-TR) RoHS : Compliant |
| 1,000 | ||
| TW-06-09-T-S-260-040 | Samtec Inc | Board Stackers & Spacers, Pin Header, 6.6 mm, 6 Contacts, Solder, 1 Rows, 2 mm, TW Series - Bulk (Alt: TW-06-09-T-S-260-040) RoHS : Compliant |
| 0 | ||
| DW-10-08-L-S-260 | Samtec Inc | Stacking Board Connector, DW Series, 10 Contacts, Header, 2.54 mm, Through Hole, 1 Rows - Bulk (Alt: DW-10-08-L-S-260) RoHS : Compliant |
| 0 | ||
| DW-05-15-F-S-260 | Samtec Inc | Board Stackers & Spacers, Pin Header, 6.6 mm, 5 Contacts, Solder, 1 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-05-15-F-S-260) RoHS : Compliant |
| 0 | ||
| ECS-260-8-37B-CWY-TR3 | ECS International Inc | - Tape and Reel (Alt: ECS-260-8-37B-CWY-TR3) RoHS : Compliant |
| 0 | ||
| DWM-25-55-G-S-260 | Samtec Inc | - Bulk (Alt: DWM-25-55-G-S-260) RoHS : Compliant | 0 | |||
| ARMTS-2605/480V | Omega Engineering | - Bulk (Alt: ARMTS-2605/480V) RoHS : Not Compliant |
| 0 | ||
| ZF5S-26-01-T-WT-FR | Samtec Inc | - Tape and Reel (Alt: ZF5S-26-01-T-WT-FR) RoHS : Compliant |
| 0 | ||
| SIT1602BC-12-YYS-26.000000D | SiTime Corporation | MEMS Crystal Oscillator 26MHz 1.62V to 3.63V 15pF 4-Pin SMD T/R - Tape and Reel (Alt: SIT1602BC-12-YYS-26.000000D) RoHS : Compliant |
| 0 | ||
| CSE-811LS-260B | Super Micro Computer Inc | - Bulk (Alt: CSE-811LS-260B) | 0 | |||
![]() Newark | IAUS260N10S5N019TATMA1 | Infineon Technologies AG | MOSFET, N-CH, 100V, 260A, HDSOP; RoHS : Compliant |
| 1,746 | |
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | MOSFET, N-CH, 100V, 260A, HDSOP; RoHS : Compliant |
| 1,746 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | CRYSTAL, 6MHZ, 18PF, SMD, 11.4MM X 4.7MM; RoHS : Compliant |
| 1,000 | ||
| QT161S-26.000MEEB-T | TXC Corporation | XTAL, 26MHZ, 6PF, SMD, 1.6MM X 1.2MM; RoHS : Compliant |
| 500 | ||
| QT161S-26.000MEEB-T | TXC Corporation | XTAL, 26MHZ, 6PF, SMD, 1.6MM X 1.2MM; RoHS : Compliant |
| 500 | ||
| QT325S-26.000MAHJ-T | TXC Corporation | 3.2X2.5 GLASS SEAL MHZ QUARTZ CRYSTAL; RoHS : Compliant |
| 500 | ||
| QT325S-26.000MAHE-T | TXC Corporation | 3.2X2.5 GLASS SEAL MHZ QUARTZ CRYSTAL; RoHS : Compliant |
| 500 | ||
| QT325S-26.000METJ-T | TXC Corporation | 3.2X2.5 GLASS SEAL MHZ QUARTZ CRYSTAL; RoHS : Compliant |
| 500 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | XTAL, 6MHZ, SMD, 11.4MM X 4.7MM, 30PPM; RoHS : Compliant |
| 476 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | XTAL, 6MHZ, SMD, 11.4MM X 4.7MM, 30PPM; RoHS : Compliant |
| 476 | ||
| QT325S-26.000METE-T | TXC Corporation | 3.2X2.5 GLASS SEAL MHZ QUARTZ CRYSTAL; RoHS : Compliant |
| 450 | ||
| B82725S2602N041 | TDK Corporation | POWER LINE CHOKE, RING CORE, 7.8MH, 6A; RoHS : Compliant |
| 80 | ||
| QT49S-26.000MAHJ-T | TXC Corporation | XTAL, 26MHZ, 18PF, SMD, 12.7MM X 4.8MM; RoHS : Compliant |
| 77 | ||
| QT49S-26.000MAHJ-T | TXC Corporation | XTAL, 26MHZ, 18PF, SMD, 12.7MM X 4.8MM; RoHS : Compliant |
| 77 | ||
| BNS260-11/01ZG-ST-L | Schmersal | SWITCH, MAGNETIC; RoHS : Compliant |
| 61 | ||
![]() NXP Semiconductors | SFS2603HMBE6AD | NXP Semiconductors | S32K324 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | |
| SFS2600HMBEDAD | NXP Semiconductors | S32K148 for Infotainment Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
![]() RS | MS260-50.0K-1% | Caddock Electronics Inc | RESISTOR, FILM, POWER, AXIAL, 50 KILOHM, 1%, 6W, 2KV |
| 198 | |
| DLCBS2-6-01 | Essentra Components | SPACER; DUAL LOCK; NATURAL; 3/8 IN |
| 151 | ||
| RSS260-D-ST (103003602) | Schmersal | RFID SAFETY SENSOR, M8 CONNECTOR, LED, COMPACT DESIGN |
| 49 | ||
| S260 | Switchcraft Conxall | PLUG PHONE 3 SCREW 0.206 2.7 IN. 0.206 IN. RoHS : Compliant |
| 45 | ||
| BNS260-11/01ZG-ST-R (101184368) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, SIGNALING CONTACT, LED, RH DOOR |
| 32 | ||
| BNS260-11/01Z-ST-L (101184380) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, LH DOOR |
| 18 | ||
| BNS260-11Z-ST-R (101184363) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, RIGHT HAND DOOR, CONNECTOR |
| 12 | ||
| 3RS26002BW30 | Siemens | TEMPERATURE MONITORING RELAY ;3RS26002BW30 |
| 8 | ||
| BNS260-02ZG-ST-L (101184381) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, LED, LEFT HAND DOOR |
| 6 | ||
| S2607 | Lapp Group | CABLE GLAND, M12, 2.0-5.0 MM, POLYAMIDE, BLACK, IP68, SKINTOP SERIES |
| 4 | ||
| BNS 260-02/01Z-R 5,0M | Schmersal | THERMOPLASTIC ENCLOSURE, SMALL BODY, CONCEALED MOUNTING POSSIBLE |
| 3 | ||
| MJS2-60B | ABB Low Voltage Products and Systems | JS 2-POS MOM |
| 2 | ||
| CCP2S-2-60CF | Eaton Bussmann | COMPACT CIRCUIT PROTECTOR;2 POLE;W/SIDE MOUNT MECHANISM RIGHT SIDE;CUBEFORCE;60A |
| 2 | ||
| BI2-CRS260-AP4X2-H1141/S34 (4570890) | TURCK Inc | PROXIMITY SENSOR, INDUCTIVE CYLINDER POSITION, INSERTION TYPE, 2MM RANGE |
| 2 | ||
| BHS0030 (BES 516-300-S260-S4-D) | Balluff Inc | PROXIMITY SENSOR, BES 516-300-S260-S4-D |
| 1 | ||
![]() Microchip Technology Inc | UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | |
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| UES2604 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2601 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2605 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2601R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2604R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2603E3 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2050-09-21 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2603HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2604HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2606RHR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | DLCBS2-6-01 | Essentra Components | 2,902 | |||
| 0827-S-26012 | MISC. VIBRATION MOUNTS & BUMPERS | 1,687 | ||||
![]() Rochester Electronics | MBRS260T3G | onsemi | Schottky Power Rectifier, Surface Mount, 2.0 A, 60 V, SMB Package RoHS : Not Compliant |
| 100,000 | |
| MURS260T3G | onsemi | Rectifier Single Standard 600V 2A SMB T/R RoHS : Compliant |
| 2,000 | ||
| NCP163AFCS260T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 2.6 V, Active Discharge RoHS : Compliant |
| 110,000 | ||
| NRVBS260NT3G | onsemi | Schottky Power Rectifier, Surface Mount, 2.0 A, 60 V, SMB Package RoHS : Not Compliant |
| 64,500 | ||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | IAUS260N10S5N019T - MOSFET_(75V,120V( RoHS : Compliant |
| 0 | ||
| IRS26072DSPBF | Infineon Technologies AG | Half Bridge Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant |
| 95 | ||
| IRS26072DSTRPBF | Infineon Technologies AG | Gate Driver RoHS : Compliant |
| 11,702 | ||
IRS26072DSPBF![]() | International Rectifier | Half Bridge Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant |
| 95 | ||
IRS2607DSPBF![]() | International Rectifier | Full Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 22,054 | ||
IRS2607DSTRPBF![]() | International Rectifier | Full Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 2,799 | ||
IRS2608DSPBF![]() | International Rectifier | Half Bridge Based Peripheral Driver, 0.35A, CMOS, PDSO8 RoHS : Compliant |
| 7,087 | ||
IRS2609DSPBF![]() | International Rectifier | Half Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 2,908 | ||
| HIP6006CB-TS2604 | Intersil Corporation | Switching Controller, Voltage-mode, 0.35A, 1000kHz Switching Freq-Max, BIPolar, PDSO14 ' RoHS : Not Compliant |
| 2,420 | ||
| ISL6125IRS2604 | Intersil Corporation | Power Sequencing Controllers RoHS : Not Compliant |
| 828 | ||
| DM54LS260W/883 | National Semiconductor Corporation | NOR Gate, LS Series, 2-Func, 5-Input, TTL, CDFP14 RoHS : Not Compliant |
| 8 | ||
![]() TME | RSS260-SD-ST | Schmersal | Safety switch: RFID |
| 12 | |
| QT252S-26.000MAAV-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 8pF; Freq.stability: ±30ppm |
| 0 | ||
| QT49S-26.000MAHJ-T | QST Corporation | Crystal; 26MHz; SMD; 12.7x4.8x3.8mm; 18pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MAAB-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 6pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MEEI-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 16pF; Freq.stability: ±10ppm |
| 0 | ||
| QT252S-26.000MAAJ-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 18pF; Freq.stability: ±30ppm |
| 0 | ||
| QT252S-26.000MEEQ-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 10pF; Freq.stability: ±10ppm |
| 0 | ||
| QT161S-26.000MDDV-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 8pF; Freq.stability: ±20ppm |
| 0 | ||
| QT161S-26.000MEEE-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 12pF; Freq.stability: ±10ppm |
| 0 | ||
| QT325S-26.000MAAE-T | QST Corporation | Crystal; 26MHz; SMD; 3.2x2.5x0.7mm; 12pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MEEB-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 6pF; Freq.stability: ±10ppm |
| 0 | ||
| QT216S-26.000MEEC-T | QST Corporation | Crystal; 26MHz; SMD; 2x1.6x0.5mm; 9pF; Freq.stability: ±10ppm |
| 0 | ||
| QT325S-26.000MAHJ-T | QST Corporation | Crystal; 26MHz; SMD; 3.2x2.5x0.7mm; 18pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MAAI-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 16pF; Freq.stability: ±30ppm |
| 0 | ||
| RSS260-I1-D-ST | Schmersal | Safety switch: RFID |
| 0 | ||
![]() Ameya Holding Limited | MURS260T3G | onsemi | MURS Series 2 A 600 V 75 ns Surface Mount Ultrafast Power Rectifier - CASE-403A RoHS : Compliant | 60,000 | ||
| MBRS260T3G | onsemi | MBRS Series 2 A 60 V Surface Mount Schottky Power Rectifier RoHS : Compliant | 3,010 | |||
![]() ComSIT USA | NTS260SFT1G | onsemi | AVAILABLE EU RoHS : Compliant | 791 | ||
| NRVTS260ESFT1G | onsemi | AVAILABLE EU RoHS : Compliant | 1,068 | |||
| MBRS260T3G | onsemi | AVAILABLE EU RoHS : Compliant | 3,000 | |||
| MURS260T3G | onsemi | AVAILABLE EU RoHS : Compliant | 4,626 | |||
![]() ComSIT USA | NRVBS260T3G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 26,902 | ||
| OGS260 | omega | Electronic Component RoHS : Not Compliant | 12,000 | |||
| LGS260DOH | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 8,624 | |||
| GTCSSPM113LQLS260350R18 | OSRAM GmbH | Single Color LED RoHS : Compliant | 6,000 | |||
| B72500E5170S260 | TDK Electronics | SMD MULTILAYER VARISTOR Varistor, 22V, 0.075J, Surface Mount RoHS : Compliant | 4,000 | |||
| LGS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, T-1, 2.9mm RoHS : Compliant | 3,000 | |||
IRS2607DSTRPBF![]() | International Rectifier | HIGH AND LOW SIDE DRIVER Full Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant | 2,500 | |||
| LGS260DOJ | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 1,995 | |||
| LYS260DOGEG | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 1,330 | |||
| LGS260D0GEGURT | Siemens | Electronic Component RoHS : Not Compliant | 960 | |||
| LYS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 640 | |||
| NRVTS260ESFT1G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon RoHS : Compliant | 90 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
S2600M![]() | RCA | SILICON CONTROLLED RECTIFIER Silicon Controlled Rectifier, 7A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-5 RoHS : Not Compliant | 30 | |||
![]() Interstate Connecting Components | 55PC1111-22-9-9CS2606 | TE Connectivity | 55PC1111-22-9-9CS2606 | 0 | ||
| 55PC0211-20-9CS2600 | TE Connectivity | 55PC0211-20-9CS2600 | 0 | |||
| 55PC0221-18-6/9CS2601 | TE Connectivity | 55PC0221-18-6/9CS2601 | 0 | |||
| 55PC1111-18-9-9CS2606 | TE Connectivity | 55PC1111-18-9-9CS2606 | 0 | |||
| 55PC0222-16-6/9CS2604 | TE Connectivity | 55PC0222-16-6/9CS2604 | 0 | |||
| 55PC0211-16-9CS2600 | TE Connectivity | 55PC0211-16-9CS2600 | 0 | |||
| 55PC1111-20-9-9CS2606 | TE Connectivity | 55PC1111-20-9-9CS2606 | 0 | |||
| ATBS-260-0305 | Amphenol Sine Systems |
| 0 | |||
| 55PC1121-24-6/9-9CS260 | TE Connectivity | 55PC1121-24-6/9-9CS2607 | 0 | |||
| 55PC0221-22-6/9CS2601 | TE Connectivity | 55PC0221-22-6/9CS2601 | 0 | |||
| 55PC0211-22-9CS2600 | TE Connectivity |
| 0 | |||
| 55PC0211-14-9CS2600 | TE Connectivity | 55PC0211-14-9CS2600 | 0 | |||
| 55PC0231-20-3/6/9CS260 | TE Connectivity | 55PC0231-20-3/6/9CS2602 | 0 | |||
| 55PC0211-12-9CS2600 | TE Connectivity | 55PC0211-12-9CS2600 | 0 | |||
| 55PC1121-16-6/9-9CS260 | TE Connectivity | 55PC1121-16-6/9-9CS2607 | 0 | |||
![]() NexGen Digital | MURS260T3G | onsemi | RoHS : Compliant | 17 | ||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
![]() PEI Genesis | DPX3NE-A318-34S-2601-F0 | ITT Interconnect Solutions |
| 0 | ||
| S2900AS2608LNS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| S4866S2608-34-1-3 | SOURIAU-SUNBANK |
| 0 | |||
| S3186F15S2-6.0-34-1.5 | SOURIAU-SUNBANK |
| 0 | |||
| S3186FM77S2-6.0-34-2.0 | SOURIAU-SUNBANK |
| 0 | |||
| DPX3NE-A318-34S-2601-FO | ITT Interconnect Solutions |
| 0 | |||
| S2907S2606BIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| NRS-2-6000-5H | SOURIAU-SUNBANK |
| 0 | |||
| S2900AS2607AIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 55PC1111-22-9-9CS2606 | TE Connectivity | Connectors |
| 76,815 | |
| MTLW-105-07-G-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,021 | ||
| MTSW-106-24-L-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 876 | ||
| MTMM-104-11-T-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 801 | ||
| MTSW-109-08-G-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTSW-105-09-G-S-260-RE-002 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 475 | ||
| TW-06-09-T-S-260-040 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 344 | ||
| TW-08-03-T-S-260-060 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 262 | ||
| DW-04-17-G-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 229 | ||
| MTMM-114-07-S-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 221 | ||
| DW-06-15-S-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 184 | ||
| DW-10-08-L-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 146 | ||
| DW-09-08-T-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 146 | ||
| DW-13-08-T-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 106 | ||
| EW-23-09-G-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 90 | ||
![]() Richardson RFPD | TS260F | Spectrum Control | Terminations Sma, Up To 26.5 Ghz, 1Watt RoHS : Compliant |
| 0 | |
| RTV-2016AF31O-S-26.000-TR | Raltron Electronics Corporation | Temperature Compensated Crystal Oscillator RoHS : Compliant | 0 | |||
| TS260MC | Spectrum Control | Conn SMA 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
| TS260M | Spectrum Control | Conn SMA Terminator 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
| RTX-2520DD31-S-26.000-TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| RTX-2520DD33-S-26.000-TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| ATS260BSM-1E | CTS Corporation | Crystal 26MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
| CCR-38S260 | Teledyne Relays | RF Switch 0MHz to 18GHz 60dB RoHS : Compliant |
| 0 | ||
| RTX-2520AD31-S-26.000-TR | Raltron Electronics Corporation | RTX-2520AD31-S-26.000-TR RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T RoHS : Compliant | 0 | |||
![]() Rutronik | IAUS260N10S5N019TATMA1 | Infineon Technologies AG | N-CH 100V 260A 1,6mOhm TOLT RoHS : Compliant |
| 19 | |
![]() Chip 1 Exchange | TS260S_R2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 146,211 | ||
| MURS260T3G-ON | onsemi | INSTOCK | 7,155 | |||
| KLM4S260RY | TKS | INSTOCK | 3,224 | |||
| LYS260-D0 | OSRAM GmbH | INSTOCK | 2,985 | |||
| NRVBS260T3G-IR01 | onsemi | INSTOCK | 2,058 | |||
| KLM3S260RY | TKS | INSTOCK | 1,404 | |||
| SN74S260NC | Texas Instruments | INSTOCK | 1,000 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| NRVBS260T3G | onsemi | INSTOCK RoHS : Compliant | 823 | |||
| SN74LS260 | Motorola Semiconductor Products | INSTOCK | 310 | |||
| PS2601 | INSTOCK | 49 | ||||
| DM74LS260N | INSTOCK | 40 | ||||
| DM54LS260J/883QS | INSTOCK | 6 | ||||
| 54LS260DMQB | INSTOCK | 2 | ||||
| DM54LS2603J/883QS | INSTOCK | 2 | ||||
![]() Avnet Abacus | MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | ||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| 578S260CAT | CTS Corporation | - Tape and Reel (Alt: 578S260CAT) RoHS : Compliant | 0 | |||
| 579S260CTT | CTS Corporation | - Tape and Reel (Alt: 579S260CTT) RoHS : Compliant | 0 | |||
| TS260F11CET | CTS Corporation | - Tape and Reel (Alt: TS260F11CET) RoHS : Compliant | 0 | |||
| 588S260X2IAT | CTS Corporation | - Tape and Reel (Alt: 588S260X2IAT) RoHS : Compliant | 0 | |||
| B72500E140S260 | TDK Corporation | TVS Varistor 14 VAC 18 VDC CTVS Standard 42 V 0603 1608 Metric Multilayer Varistor MLV (Alt: B72500E0140S260) RoHS : Compliant | 0 | |||
| ZF5S-26-01-T-WT-FR | Samtec Inc | (Alt: ZF5S-26-01-T-WT-FR) RoHS : Compliant | 0 | |||
| ECS-260-9-33B-CKY-TR | ECS International Inc | Crystal Standard 26 MHz SMD 32mm x 25mm x 08mm 10 ppm 9 pF 10 ppm ECS33B - Tape and Reel (Alt: ECS-260-9-33B-CKY-TR) RoHS : Compliant | 0 | |||
| ECS-260-12-37-CKM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 10 ppm 12 pF 10 ppm ECX1637 - Tape and Reel (Alt: ECS-260-12-37-CKM-TR) RoHS : Compliant | 0 | |||
| ECS-260-18-37-AGM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 30 ppm 18 pF 25 ppm ECX1637 - Tape and Reel (Alt: ECS-260-18-37-AGM-TR) RoHS : Compliant | 0 | |||
ECS-260-10-37-RWM-TR![]() | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 15 ppm 10 pF 15 ppm ECX1637 - Tape and Reel (Alt: ECS-260-10-37-RWM-TR) RoHS : Compliant | 0 | |||
| ECS-260-8-36B2-CKM-TR | ECS International Inc | Crystal 26MHz 8pF 4Pin SMD ECX2236B2 TR - Tape and Reel (Alt: ECS-260-8-36B2-CKM-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PS26-057 | Sumida Corporation | (Alt: PS26-057) RoHS : Compliant | 0 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 0 | |||
| ECS-260-8-30B-CKM | ECS International Inc | Crystal 26MHz 8pF 4-Pin Miniature SMD (Alt: ECS-260-8-30B-CKM) RoHS : Compliant | 0 | |||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant |
| 0 | ||
| ECS-260-6-37B2-CKY-TR | ECS International Inc | (Alt: ECS-260-6-37B2-CKY-TR) RoHS : Compliant | 0 | |||
| MBRS260T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| CS2600-CN | Cirrus Logic | CLOCK SYNTHESIZER AND MULTIPLIER WITH PHASE SYNC A MULTIPLE (Alt: CS2600-CN) RoHS : Compliant | 0 | |||
| CS2600-DNR | Cirrus Logic | (Alt: CS2600-DNR) RoHS : Compliant | 0 | |||
| FS2600AMBA0 | NXP Semiconductors | LQFP48 SAFETY SBC (Alt: FS2600AMBA0) RoHS : Compliant | 0 | |||
| SL2S2602FUDZ | NXP Semiconductors | ICODE SLIX2 IC Wafer ISOIEC 1569323 (Alt: SL2S2602FUDZ) RoHS : Compliant | 0 | |||
| SL2S2602FTBX | NXP Semiconductors | ICODE SLIX2 IC 3 Pins XSON ISOIEC 1569323 (Alt: SL2S2602FTBX) RoHS : Compliant | 0 | |||
| MFS2600AMBA0AD | NXP Semiconductors | (Alt: MFS2600AMBA0AD) RoHS : Compliant | 0 | |||
| TS260S_R2_00001 | PanJit Semiconductor | (Alt: TS260S_R2_00001) RoHS : Compliant | 0 | |||
| MFS2601HMDA0ADR2 | NXP Semiconductors | Power Management Specialised PMIC Auto SBC (Alt: MFS2601HMDA0ADR2) RoHS : Compliant | 0 | |||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 26 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS260T2G) RoHS : Compliant | 0 | |||
| MFS2600AMDA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2600AMDA0ADR2) RoHS : Compliant | 0 | |||
| MFS2602AMBA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2602AMBA0ADR2) RoHS : Compliant | 0 | |||
| SIT1602BI-13-18S-26.000000 | SiTime Corporation | (Alt: SIT1602BI-13-18S-26.000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPDALRS-26.0000T | Abracon Corporation |
| 0 | ||
| AMMLPAALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAXJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAAVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAAVRS-26.0000T | Abracon Corporation |
| 0 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | CRYSTAL 6.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPABLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVCS-26.0000T | Abracon Corporation |
| 0 | |||
![]() Chip-Germany GmbH | SS26-0B00-02 | Broadcom Limited | 10,000 | |||
![]() Component Electronics, Inc | ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,361 | |
| LYS260-DO | OSRAM GmbH | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,760 | ||
| MURS260T3 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 150 | ||
| SN74S260J | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 119 | ||
| HW-02-08-TM-S-260-110 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 115 | |||
| MPZ1608S260ATAH0 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| 74S260N | Signetics | IN STOCK SHIP TODAY |
| 85 | ||
| SN74LS260N | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 27 | ||
| AS-26.000-20-F-SMD | Raltron Electronics Corporation | IN STOCK SHIP TODAY | 10 | |||
SN74S260N![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 74LS260PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| 74S260N | Signetics | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | OFBLTS2.6-05-PP | Essentra Components | 0 | |||
| XL-JS260TT | Sugatsune Kogyo Co Ltd | 0 | ||||
| DLCBS2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | |||
| LCBS-2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Spt Dual Lock Natural | 0 | |||
| TAS260A | Essentra Components | 1.25 IN SQUARE ALL METAL GLIDE | 0 | |||
![]() EBV Elektronik | TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| S2-60BWE | SIMCom | Coyote N6 Device (Alt: S2-60BWE) RoHS : Compliant | 0 | |||
| S2-60A6M | SIMCom | RF Components (Alt: S2-60A6M) RoHS : Compliant | 0 | |||
| S2-60BW1 | SIMCom | RF Components (Alt: S2-60BW1) RoHS : Compliant | 0 | |||
| S2-60BW4 | SIMCom | CASING S260BW4 (Alt: S2-60BW4) RoHS : Not Compliant | 0 | |||
| SL2S2602FTBX | NXP Semiconductors | ICODE SLIX2 IC 3 Pins XSON ISOIEC 1569323 (Alt: SL2S2602FTBX) RoHS : Compliant | 0 | |||
| SS26-0B00-02 | Broadcom Limited | (Alt: SS26-0B00-02) RoHS : Compliant | 0 | |||
| SNRVBS260T3G | onsemi | Rectifiers Schottky (Alt: SNRVBS260T3G) RoHS : Compliant | 0 | |||
| PFS2603HMBK9AD | NXP Semiconductors | SOT1571eFS26 12NC 935466770557 (Alt: PFS2603HMBK9AD) RoHS : Compliant | 0 | |||
| MURS260HE3_A/H | Vishay Intertechnologies | (Alt: MURS260HE3_A/H) RoHS : Compliant | 0 | |||
| MURS260-E3/52T | Vishay Intertechnologies | 2A 600V 50NS SMB UF RECT SMD (Alt: MURS260-E3/52T) RoHS : Compliant | 0 | |||
| MFS2603AMDA0AD | NXP Semiconductors | (Alt: MFS2603AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2600AMDA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2600AMDA0ADR2) RoHS : Compliant | 0 | |||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | Transistor MOSFET NCH 100V 260A 16Pin HDSOP TR (Alt: SP002952334) RoHS : Compliant | 0 | |||
![]() FDH Electronics | SWBA032BRASS260 | LITTLE FALLS ALLOYS, INC. | Magnet Wire | 87 | ||
| 55PC0231-20-3/6/9CS2602 | TE Connectivity | Multi-Cond Cbl RoHS : Compliant | 0 | |||
| 55PC0232-8-3/6/9CS2605 | TE Connectivity | Wire and Cable | 0 | |||
| 55PC0212-22-9CS2603 | TE Connectivity | Wire and Cable | 0 | |||
![]() Flip Electronics | NTS260SFT1G | onsemi | Stock, Ship Today RoHS : Compliant | 1,231,645 | ||
| A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | |||
| MFS2603AMBA0AD | NXP Semiconductors | Stock RoHS : Compliant | 2,250 | |||
| MFS2603AMDA0AD | NXP Semiconductors | Stock | 500 | |||
![]() Maritex | MURS260T3G | onsemi | Rectifier Diodes & Bridges; MURS260T3G; ON SEMICONDUCTOR; 2; 2 A; 600 V; 5 �A RoHS : Compliant |
| 5,539 | |
| FPV160808S260PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 26VDC; 25pF RoHS : Compliant |
| 3,860 | ||
| MBRS260T3G | onsemi | Rectifier Diodes & Bridges; MBRS260T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 473 | ||
| TGS2600 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm H2; supply: 5V; power: 210mW |
| 62 | ||
| TGS2603 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-10ppm C2H5OH; supply: 5V; power: 240 mW |
| 43 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 39 | ||
![]() Master Electronics | 55PC1111-22-9-9CS2606 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55PC1111-22-9-9CS2606 RoHS : Compliant |
| 116,387 | |
| S260 | Switchcraft Conxall | Conn Phone Plug M 3 POS Screw ST Cable Mount 3 Terminal 1 Port RoHS : Compliant |
| 401 | ||
| DW-05-15-F-S-260 | Samtec Inc | FLEXIBLE BOARD STACKING H RoHS : Compliant |
| 0 | ||
| DW-07-08-F-S-260 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-08-09-T-S-260 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-10-08-L-S-260 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-10-15-F-S-260-003 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-21-07-S-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-22-07-T-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-23-08-L-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-36-08-L-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-44-09-F-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-49-08-L-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-03-54-L-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DWM-06-54-G-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | MJS2-60B | ABB Low Voltage Products and Systems | Joystick 2-pos, Mom, w/o latching, Black, Non-illum, Chrome Metal, No contact block, 1SFA611702R6006 |
| 5 | |
| M2SS2-60B02 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NC |
| 3 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| CCP2S-2-60CF | Eaton Bussmann | Compact Circuit Protector;2 Pole;W/Side Mount Mechanism Right Side;CUBEForce;60A |
| 2 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 1 | ||
| M2SS2-60B20 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NO |
| 0 | ||
| M2SS2-60B11 | ABB Low Voltage Products and Systems | 2POS KNOB; A&C; BLK; 1N0-1NC |
| 0 | ||
| BI2-CRS260-AP4X2-H1141/S34 | TURCK Inc | Inductive Prox Sensor, R/A 12.7mm Smooth Barrel, R: 2mm flush, 3wire DC PNP NO, M12 Conn, 4570890 |
| 0 | ||
| BI2-CRS260-ADZ30X2-B3131/S34 | TURCK Inc | Proximity Sensor,Inductive Cylinder Position,Insertion Type,2mm Range |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,047 | |
| PE3W02498/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with Double HeatShrink., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02498/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W02498/HS2-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink. |
| 1,709 | ||
| PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 1,244 | ||
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 1,244 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 518 | ||
| PE3C6335/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-60 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-60 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 317 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 272 | ||
| PE3C6004/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink. |
| 133 | ||
| PE3W06854/HS2-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-60, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-60 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink. |
| 102 | ||
| PE3W00013/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W00013/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink. |
| 0 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-60 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C0051/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
![]() Sager | DW-10-08-L-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 221 | |
| S260 | Switchcraft Conxall | Phone Connectors 3 COND.206BLACK RoHS : Compliant |
| 0 | ||
| DW-05-15-F-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| DW-07-08-F-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-08-09-T-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DWM-25-55-G-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-10-04-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-10-09-S-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-03-G-S-260-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-06-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-15-07-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-16-06-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-19-07-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-22-07-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-24-09-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Teledyne HiRel | DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
![]() Vyrian | SNJ54S260J-00 | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 | 9,144 | ||
| SS26-0B00-02 | Broadcom Limited | 7,453 | ||||
SNJ54S260J![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 RoHS : Not Compliant | 7,212 | |||
| NRVTS260ESFT3G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon RoHS : Compliant | 6,495 | |||
LM3S2601-EQC50-A2T![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQFP100 RoHS : Compliant | 6,168 | |||
| KTNVS260032 | Kingston Technology Company | 6,105 | ||||
| UES2603HR2 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 2 Element, 30A, 150V V(RRM), Silicon, TO-3 RoHS : Not Compliant | 5,662 | |||
SN74S260N3![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, PDIP14 RoHS : Not Compliant | 5,508 | |||
| SN54S260J-00 | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 | 5,424 | |||
| UES2606 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 2 Element, 30A, 400V V(RRM), Silicon, TO-3 RoHS : Not Compliant | 4,999 | |||
| A2T21S260-12SR3 | NXP Semiconductors | RF Power Field-Effect Transistor RoHS : Compliant | 4,894 | |||
| KTNVS260016 | Kingston Technology Company | 4,749 | ||||
SN54S260J![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 RoHS : Not Compliant | 3,812 | |||
| SN74S260J | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 RoHS : Not Compliant | 3,166 | |||
| PS2601L | Renesas Electronics Corporation | Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Not Compliant | 488 | |||
![]() Win Source Electronics | DFLS260-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 300,000 | |
| NRVTS260ESFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 300,000 | ||
| MPZ1608S260ATAH0 | TDK Corporation | FERRITE BEAD 26 OHM 0603 1LN RoHS : Compliant |
| 204,000 | ||
| SDCW4532S-2-601TF | Sunlord | CMC 1A 2LN 600 OHM SMD RoHS : Compliant |
| 200,000 | ||
| MURS260T3 | onsemi | DIODE GEN PURP 600V 2A SMB RoHS : Not Compliant |
| 171,750 | ||
| MURS260T3G | onsemi | DIODE GEN PURP 600V 2A SMB / Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T/R RoHS : Compliant |
| 169,370 | ||
| NRVTS260ESFT3G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 140,000 | ||
| DFLS260Q-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 64,088 | ||
| MBRS260T3G | onsemi | DIODE SCHOTTKY 60V 2A SMB RoHS : Compliant |
| 60,000 | ||
| NTS260SFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 23,900 | ||
| NTS260ESFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 22,500 | ||
| TGS2600 | FIGARO Engineering Inc |
| 5,850 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |