 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
RD3-R2 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 DigiKey | RD3.3S-T1-A | Rochester Electronics LLC | DIODE ZENER 2-SUPER MINI MOLD |
| 207,000 | |
| RD30UM-T1-A | Rochester Electronics LLC | RD30UM - 150MW ZENER DIODE |
| 111,000 | ||
| RD30E-TB-AZ | Rochester Electronics LLC | DIODE ZENER |
| 62,500 | ||
| RD36F(N6)-T6-AZ | Rochester Electronics LLC | DIODE ZENER |
| 35,000 | ||
| RD33FM(D1)-T1-AZ | Rochester Electronics LLC | DIODE ZENER 2-POWER MINI MOLD |
| 22,791 | ||
| RD3.0FM-T1-AY | Rochester Electronics LLC | DIODE ZENER 2-POWER MINI MOLD |
| 19,500 | ||
| RD36F(N6)-T6 | Rochester Electronics LLC | DIODE ZENER |
| 5,000 | ||
| RD33F-T6-AZ | Rochester Electronics LLC | DIODE ZENER |
| 4,404 | ||
| RD3.0ES | Rochester Electronics LLC | DIODE ZENER 400MW DO34 |
| 3,600 | ||
| HPL505028F070MRD3P | TDK Corporation | FIXED IND 70NH 34A 0.88 MOHM SMD RoHS : Compliant |
| 1,120 | ||
| HPL505028F070MRD3P | TDK Corporation | FIXED IND 70NH 34A 0.88 MOHM SMD RoHS : Compliant |
| 1,120 | ||
| HPL505028F070MRD3P | TDK Corporation | FIXED IND 70NH 34A 0.88 MOHM SMD RoHS : Compliant |
| 1,120 | ||
| ASJ-194-L-RD-30 | Adam Technologies Inc | AUDIO JACK RoHS : Compliant |
| 457 | ||
| MJC-65CS-RD-30-32 | NBK America LLC | Flexible Couplings -Jaw Type - C |
| 50 | ||
| PRD-3DH0-24 | TE Connectivity | RELAY GEN PURPOSE SPST 20A 24V RoHS : Compliant |
| 20 | ||
 Avnet Americas | MBRD360T4G | onsemi | Schottky Barrier Rectifier, 60 V, 3.0 A - Tape and Reel (Alt: MBRD360T4G) RoHS : Compliant |
| 35,000 | |
| FERD30H100SB-TR | STMicroelectronics | Standard Recovery Diode, 100 V, 30 A, Single, 620 mV, 150 A - Tape and Reel (Alt: FERD30H100SB-TR) RoHS : Compliant |
| 5,000 | ||
| MURD320T4G | onsemi | Power Rectifier, Ultra-Fast Recovery, Switch-mode, 3 A, 200 V - Tape and Reel (Alt: MURD320T4G) RoHS : Compliant |
| 5,000 | ||
| FERD30M45CT | STMicroelectronics | Field-Effect Rectifier Diode (non Schottky) 45V 30A 3-Pin TO-220AB Tube - Rail/Tube (Alt: FERD30M45CT) RoHS : Compliant |
| 3,804 | ||
| RD3L140SPTL1 | ROHM Semiconductor | - Tape and Reel (Alt: RD3L140SPTL1) RoHS : Compliant |
| 2,500 | ||
| PRD-3AH0-120 | TE Connectivity | - Bulk (Alt: 7-1393127-3) RoHS : Compliant |
| 140 | ||
| ERJ-H2RD3602X | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ-H2RD3602X) RoHS : Not Compliant |
| 0 | ||
| ERJ-U2RD3090X | Panasonic Electronic Components | SMD Chip Resistor, 309 ohm, ? 0.5%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-U2RD3090X) RoHS : Not Compliant |
| 0 | ||
| MMF25SBRD33K | YAGEO Corporation | Surface Mount MELF Resistor, 33 kohm, MMF Series, 200 V, Metal Film, 250 mW, ? 0.1%, ? 25ppm/?C - Tape and Reel (Alt: MMF25SBRD33K) RoHS : Compliant |
| 0 | ||
| IGBRD3000CJJPCWS | Vishay Intertechnologies | - Waffle Pack (Alt: IGBRD3000CJJPCWS) RoHS : Not Compliant | 0 | |||
| ERJ-U6RD3320V | Panasonic Electronic Components | SMD Chip Resistor, 332 ohm, ? 0.5%, 125 mW, 0805 [2012 Metric], Thick Film - Tape and Reel (Alt: ERJ-U6RD3320V) RoHS : Not Compliant |
| 0 | ||
| ERJ-U6RD3401V | Panasonic Electronic Components | SMD Chip Resistor, 3.4 kohm, ? 0.5%, 125 mW, 0805 [2012 Metric], Thick Film - Tape and Reel (Alt: ERJ-U6RD3401V) RoHS : Not Compliant |
| 0 | ||
| ARD32012 | Panasonic Electronic Components | - Bulk (Alt: ARD32012) RoHS : Not Compliant |
| 0 | ||
| ARD3204HQ | Panasonic Electronic Components | - Bulk (Alt: ARD3204HQ) RoHS : Not Compliant |
| 0 | ||
| 1MM-R-D38-VS-00-H-TBP | TE Connectivity | - Rail/Tube (Alt: 3-2267440-8) RoHS : Not Compliant | 0 | |||
 Newark | APC0603RD-330KBT5 | TT Electronics Welwyn Components | RES, 330K, 0603, 0.063W, THIN FILM; RoHS : Compliant |
| 4,809 | |
| APC0603RD-330KBT5 | TT Electronics Welwyn Components | RES, 330K, 0603, 0.063W, THIN FILM; RoHS : Compliant |
| 4,809 | ||
| ERJU3RD3302V | Panasonic Electronic Components | RES, 33K, 0.5%, 0.1W, 0603; RoHS : Compliant |
| 2,747 | ||
| ERJU3RD3302V | Panasonic Electronic Components | RES, 33K, 0.5%, 0.1W, 0603; RoHS : Compliant |
| 2,747 | ||
| RD37M1000X/AA | Amphenol Positronic | D SUB CONN, PLUG, 37POS, DC SIZE, CRIMP; RoHS : Compliant |
| 28 | ||
| MP-DRD30-24 | SPC Multicomp | DC-DC CONVERTER, 24V, 1.25A; RoHS : Compliant |
| 10 | ||
| RD37M1000S/AA | Amphenol Positronic | D SUB CONN, PLUG, 37POS, CRIMP; RoHS : Compliant |
| 8 | ||
| PRD-3AJ3-24 | TE Connectivity | RELAY, SPST-NO, 125VDC, 20A; Contact Configuration:SPST-NO; Coil Voltage:24VAC; Contact Current:20A; Product Range:PRD Series; Relay Mounting:Panel Mount; Coil Type:Non Latching; Contact Voltage VAC:-; Relay Terminals:Screw RoHS Compliant: Yes RoHS : Compliant |
| 7 | ||
| ECRD3103U00 | L-com Inc | CONN MOD, RJ45 JACK, 1 X 1 (PORT), 8P8C; RoHS : Not Compliant |
| 4 | ||
| BZ-2RD331 | Honeywell Sensing and Control | BASIC SWITCH, PIN PLUNGER, SPDT, 15A, 600V; Microswitch Type:Standard; Microswitch Actuator:Pin Plunger; Contact Configuration:SPDT; Switch Terminals:Screw; Contact Current Max:15A; Contact Voltage DC Nom:250V; Operating Force:13ozf RoHS Compliant: Yes RoHS : Compliant |
| 3 | ||
| RD37M00000/AA | Amphenol Positronic | D SUB HOUSING, PLUG, 37POS, DC; No. of Positions:37Positions; Connector Type:D Sub; Connector Shell Size:DC; Product Range:RD Series; Gender:Plug; Connector Body Material:Steel Body RoHS Compliant: Yes RoHS : Compliant |
| 3 | ||
| LRD32 | Schneider Electric | RELAY, OVERLOAD, 23-32A; RoHS : Not Compliant |
| 2 | ||
| LRD32 | Schneider Electric | RELAY, OVERLOAD, 23-32A; RoHS : Compliant |
| 1 | ||
| RD350 | Extech by FLIR | REFRIGERANT LEAK DETECTOR, 221X74X47MM; RoHS : Compliant |
| 1 | ||
| RD3 | Pulse Electronics Corporation | 19" RACK DRAWER, 3U; (Alternate Part Number: 5051259012271 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX6834FXRD3+T | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant | 35,000 | ||
| MAX6731AUTRD3+T | Analog Devices Inc | Single-/Dual-/Triple-Voltage µ RoHS : Compliant |
| 15,309 | ||
| MAX6730UTRD3+ | Analog Devices Inc | Single-/Dual-/Triple-Voltage µ RoHS : Compliant | 4,003 | |||
| MAX6731AUTRD3+ | Analog Devices Inc | Single-/Dual-/Triple-Voltage µ RoHS : Compliant | 2,612 | |||
| AD-APARD32690-SL | Analog Devices Inc | MAX32690 Arduino form factor RoHS : Compliant |
| 3 | ||
| MAX6730UTRD3+T | Analog Devices Inc | Single-/Dual-/Triple-Voltage µ RoHS : Compliant | 0 | |||
| MAX6736XKVRD3+T | Analog Devices Inc | Low-Power Dual-/Triple-Voltage RoHS : Compliant |
| 0 | ||
| MAX6846KARD3+T | Analog Devices Inc | Low-Power, Adjustable Battery RoHS : Compliant | 0 | |||
| MAX6832HXRD3+ | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant | 0 | |||
| MAX6846KARD3+ | Analog Devices Inc | Low-Power, Adjustable Battery RoHS : Compliant | 0 | |||
| MAX6834FXRD3+ | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant | 0 | |||
| MAX6834IXRD3+ | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant | 0 | |||
| MAX6834IXRD3+T | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant | 0 | |||
| MAX6736XKVRD3+ | Analog Devices Inc | Low-Power Dual-/Triple-Voltage RoHS : Compliant | 0 | |||
| MAX6832HXRD3+T | Analog Devices Inc | Ultra-Low-Voltage SC70 Voltage RoHS : Compliant |
| 0 | ||
 NXP Semiconductors | RD33774PC3EVB | NXP Semiconductors | HVBMS Centralized Cell Monitoring Unit Using ETPL with MC33774ATP, RoHS : Compliant |
| 4 | |
| RD33772BJBEVM | NXP Semiconductors | High Voltage Battery Junction Box Reference Design, RoHS : Compliant |
| 5 | ||
| RD33774PDSTEVB | NXP Semiconductors | MC33774ATP Evaluation Board with Isolated Daisy Chain, RoHS : Compliant |
| 0 | ||
| RD33774CNC3EVB | NXP Semiconductors | HVBMS Centralized Cell Monitoring Unit Using CAN (FD) with MC33774 (CMU), RoHS : Compliant |
| 10 | ||
| RD33775ADSTEVB | NXP Semiconductors | MC33775A Evaluation Board with Isolated Daisy Chain Communication, RoHS : Compliant |
| 3 | ||
| RD33775ACNTEVB | NXP Semiconductors | HVBMS Centralized Cell Monitoring Unit Using ETPL with MC33775A (CMU), RoHS : Compliant |
| 5 | ||
| RD33774ADSTEVB | NXP Semiconductors | MC33774ATA Evaluation Board with Isolated Daisy Chain Communication, RoHS : Compliant |
| 10 | ||
| RD33771CNTREVM | NXP Semiconductors | Flexible Battery Management System (BMS) Reference Design, RoHS : Compliant |
| 3 | ||
| RD33772C14VEVM | NXP Semiconductors | 14 V Battery Management System (BMS) Reference Design, Lead-Acid Replacement, RoHS : Compliant |
| 11 | ||
| RD33771CDSTEVB | NXP Semiconductors | MPC5775B and MC33771 high-voltage BMS Evaluation System, RoHS : Compliant |
| 5 | ||
 RS | DRD33WH6 | Panduit Corp | DIN RAIL DUCT, 3 HEIGHT, PVC, WHITE, PANDUCT PANELMAX SERIES |
| 180 | |
| BZ-2RD331 | Honeywell Sensing and Control | BASIC SWITCH, LARGE PREMIUM, PLUNGER SPDT, 250VAC, SOLDER LUGS, BZ SERIES RoHS : Compliant |
| 116 | ||
| RD-35B | Mean Well | POWER SUPPLY, AC/DC, SWITCHING, DUEL OUTPUT, 5V@2.2A, 24V@1A, 35W, RD SERIES RoHS : Compliant |
| 93 | ||
| LRD3365 | Schneider Electric | OVERLOAD RELAY, 80-104A FLC, TESYS LRD SERIES RoHS : Compliant |
| 4 | ||
| LRD3406 | Schneider Electric | 25-40A CLASS 10 OLR W/ RING TERMINAL RoHS : Compliant |
| 3 | ||
| RD30-3 | Eaton Bussmann | NON-FUSED DISCONNECT SWITCH;30A;3 POLE;NON-F 3P UL98 |
| 2 | ||
| LRD332 | Schneider Electric | OVERLOAD RELAY, CLASS 10, 23-32A, WITH EVERLINK POWER TERMINAL, TESYS LRD SERIES RoHS : Compliant |
| 2 | ||
| MRD 35-G1-V3 | Schneeberger AG | ROLLER MONORAIL CARRIAGE, SIZE 35, STYLE D, G1 ACCURACY, V3 PRELOAD |
| 1 | ||
| AM1R-D3-AC07D-A-25-2 | Eaton Corporation | CIRCUIT BREAKER HYDRAULIC/MAGNETIC TOGL CUR-RTG 25A PANEL 1 POLE VOL-RTG 250VAC |
| 1 | ||
| F031078 (GRD-3500-6.0) | GEFRAN spa | RUPTURE DISK |
| 1 | ||
| AL70-NW-G2-AR-5-8-FAWS-TLRD3-BZ (912401590704) | Stonco by Signify | AREA LIGHT, LED, 70W, ARM MOUNTING, TYPE 5, DIMMING, 120-277 V, BZ FINISH |
| 1 | ||
| AL70-NW-G2-AR-3-8-FAWS-TLRD3-BZ (912401590699) | Stonco by Signify | AREA LIGHT, LED, 70W, ARM MOUNTING, TYPE 3, DIMMING, 120-277 V, BZ FINISH |
| 1 | ||
| AL70-NW-G2-AR-4-8-FAWS-TLRD3-BZ (912401590702) | Stonco by Signify | AREA LIGHT, LED, 70W, ARM MOUNTING, TYPE 4, DIMMING, 120-277 V, BZ FINISH |
| 1 | ||
| AL70-NW-G2-AR-4-8-FAWS-IMRI-TLRD3-BZ (912401590708) | Stonco by Signify | AREA LIGHT, LED, 70W, ARM MOUNTING, TYPE 4, DIMMING, 120-277 V, BZ FINISH |
| 1 | ||
| RD3 | ABB Low Voltage Products and Systems | RESIDUAL CURRENT DEVICE 230-400V |
| 0 | ||
 Bisco Industries | RD37S10GES/AA | MISCELLANEOUS | 5 | |||
| IDETTRR-D3.27ZJ | MISCELLANEOUS | 2 | ||||
| TTRR-D3.54ZJ | MISCELLANEOUS | 2 | ||||
 Rochester Electronics | MAX6833VXRD3 | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +1.575V, BICMOS, PDSO3 RoHS : Not Compliant |
| 4,435 | |
MAX6834VXRD3+T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +1.575V, BICMOS, PDSO3 RoHS : Compliant |
| 66,328 | ||
| RD3.0ES | NEC Electronics Group | 400mW Zener Diode, DO-34 RoHS : Not Compliant |
| 3,600 | ||
| RD3.0ES | Renesas Electronics Corporation | 400mW Zener Diode, DO-34 RoHS : Not Compliant |
| 400 | ||
| RD3.0FM-T1-AY | Renesas Electronics Corporation | Zener Diode, 3V V(Z), 6.7%, 1W, Unidirectional RoHS : Compliant |
| 19,500 | ||
| RD3.3S-T1-A | Renesas Electronics Corporation | 200mW Zener Diode RoHS : Compliant |
| 207,000 | ||
| RD30E-TB-AZ | Renesas Electronics Corporation | Zener Diode, 30V RoHS : Compliant |
| 62,500 | ||
| RD30UM-T1-A | Renesas Electronics Corporation | 150mW Zener Diode RoHS : Compliant |
| 111,000 | ||
| RD33F(88)-AZ | Renesas Electronics Corporation | Zener Diode Single 1W DO41 RoHS : Compliant |
| 639,000 | ||
| RD33F-T6-AZ | Renesas Electronics Corporation | Zener Diode, 33V V(Z), 1W, Unidirectional, DO-41 RoHS : Compliant |
| 4,404 | ||
| RD33FM(D1)-T1-AZ | Renesas Electronics Corporation | 1W Zener Diode RoHS : Compliant |
| 22,791 | ||
| RD33JS-AZ | Renesas Electronics Corporation | Zener Diode, 33V RoHS : Compliant |
| 100 | ||
| RD36F(N6)-T6 | Renesas Electronics Corporation | Zener Diode, 36V RoHS : Not Compliant |
| 5,000 | ||
| RD36F(N6)-T6-AZ | Renesas Electronics Corporation | Zener Diode, 36V RoHS : Compliant |
| 35,000 | ||
| RD36F-T7 | Renesas Electronics Corporation | Zener Diode Single 1W DO41 RoHS : Not Compliant |
| 42,500 | ||
 TME | ERBRD3R00X | Panasonic Electronic Components | Fuse: fuse; SMD; 3A; 32VDC; quick blow; ERBRD; 0402 RoHS : Compliant |
| 1,064 | |
| RD3N03BATTL1 | ROHM Semiconductor | Transistor: P-MOSFET; -80V; -30A; 54W; TO252 RoHS : Compliant |
| 500 | ||
| LRD332 | Schneider Electric | Thermal relay; 23÷32A RoHS : Compliant |
| 0 | ||
| MBRD330TR | SMC Diode Solutions | Diode: Schottky rectifying; DPAK; SMD; 30V; 3A; reel,tape |
| 0 | ||
| RD3P100SNTL1 | ROHM Semiconductor | Transistor: N-MOSFET; unipolar; 100V; 10A; Idm: 20A; 20W; DPAK,TO252 RoHS : Compliant |
| 0 | ||
| DRD30-15 | Chinfa Electronics Ind Co Ltd | Converter: DC/DC; 30W; Uin: 10÷36VDC; Uout: 15VDC; Iout: 2A; IP20 |
| 0 | ||
| ERJH2RD3002X | Panasonic Electronic Components | Resistor: thick film; 30kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD3741X | Panasonic Electronic Components | Resistor: thick film; 3.74kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD3161X | Panasonic Electronic Components | Resistor: thick film; 3.16kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD3242X | Panasonic Electronic Components | Resistor: thick film; 32.4kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD34R0X | Panasonic Electronic Components | Resistor: thick film; 34Ω; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD3571X | Panasonic Electronic Components | Resistor: thick film; 3.57kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJH2RD3652X | Panasonic Electronic Components | Resistor: thick film; 36.5kΩ; SMD; 0402; 100mW; ±0.5%; ERJH2RD RoHS : Compliant |
| 0 | ||
| ERJU2RD3301X | Panasonic Electronic Components | Resistor: thick film; 3.3kΩ; SMD; 0402; 100mW; ±0.5%; ERJU2RD RoHS : Compliant |
| 0 | ||
| SSR-1028RD3 | QLT Power | Relay: solid state; Ucntrl: 4÷32VDC; 10A; 24÷280VAC; SSR-R; 1-phase |
| 0 | ||
 Ameya Holding Limited | MURD320T4G | onsemi | MURD Series 3 A 200 V 35 ns Tab Mount SWITCHMODE™ Power Rectifier - TO-252-3 RoHS : Compliant | 10,000 | ||
| FERD30M45CG-TR | STMicroelectronics | FERD30M45 Series 45 V (2x) 15 A SMT Field Effect Rectifier Diode - D2PAK RoHS : Compliant | 6,080 | |||
| RD3G04BBKHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3N06BATTL1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3G06BBJHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3P02BATTL1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3G03BBGTL1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3N01BATTL1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3E04BBJHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3G08DBLHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3E07BBJHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| RD3L04BBKHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 70 | ||
| RD3L03BBGTL1 | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| RD3G04BBJHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| RD3G08CBKHRBTL | ROHM Semiconductor | RoHS : Compliant |
| 15 | ||
 ComSIT USA | RD3G06BBJHRBTL | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 33,131 | ||
| MBRD360 | onsemi | AVAILABLE EU RoHS : Not Compliant | 89 | |||
| RD3T075CNTL1 | ROHM Semiconductor | AVAILABLE EU RoHS : Compliant | 8,512 | |||
ComSIT USA | GWJDSTS2EMHRD3L1 | OSRAM GmbH | Electronic Component RoHS : Compliant | 10,000 | ||
| MBRD360T4 | onsemi | SWITCHMODE DPAK SURFACE MOUNT PACKAGE POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 60V V(RRM), Silicon RoHS : Not Compliant | 8,150 | |||
| RD36UHT1 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 6,000 | |||
| RD3G400GNTL | ROHM Semiconductor | MOSFET N-Channel 40V 40A (Ta) TO-252-3 T/R RoHS : Compliant | 5,000 | |||
| MBRD320T4 | onsemi | SWITCHMODE DPAK SURFACE MOUNT PACKAGE POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 20V V(RRM), Silicon RoHS : Not Compliant | 3,700 | |||
| FERD30M45CR | STMicroelectronics | FIELD EFFECT RECTIFIER Rectifier Diode, 1 Phase, 2 Element, 45V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
| MBRD320RL | Motorola Semiconductor Products | SWITCHMODE DPAK SURFACE MOUNT PACKAGE POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 20V V(RRM), Silicon RoHS : Not Compliant | 1,775 | |||
| MURD330T4G | onsemi | SWITCHMODE POWER RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 300V V(RRM), Silicon RoHS : Compliant | 1,760 | |||
| MBRD340T4 | onsemi | SWITCHMODE DPAK SURFACE MOUNT PACKAGE POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 40V V(RRM), Silicon RoHS : Not Compliant | 1,715 | |||
| MBRD360T4G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 60V V(RRM), Silicon RoHS : Compliant | 1,073 | |||
| FERD30H100STS | STMicroelectronics | Rectifier Diode, 1 Phase, 1 Element, 100V V(RRM), Silicon, TO-220AB RoHS : Compliant | 1,000 | |||
| RD30STIBA | Panduit Corp | Electronic Component RoHS : Not Compliant | 995 | |||
| MC9S08RD32DWE | onsemi | HCS08 MICROCONTROLLER Microcontroller, 8-Bit, FLASH, 8MHz, CMOS, PDSO28 RoHS : Not Compliant | 100 | |||
| MBRD360RLG | onsemi | SWITCH MODE POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 60V V(RRM), Silicon RoHS : Compliant | 95 | |||
| SXRD311BP8 | Sony Batteries | LCD-Modul 2048 x 1536 RoHS : Compliant | 89 | |||
 Interstate Connecting Components | RD37M000E2X/AA | Amphenol Positronic | RoHS : Compliant | 0 | ||
| RD37M000EC | Amphenol Positronic | 0 | ||||
| RD37M00HTX | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| RD37M00HV5C | Amphenol Positronic | 0 | ||||
| RD37M00LVLS/AA | Amphenol Positronic | 0 | ||||
| RD37M00LVLZ | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| RD37M100E2S-15 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| RD37M100T2X/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| RD37M10ACVLC | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| RD37M10H0S | Amphenol Positronic | 0 | ||||
| RD37M10HTC | Amphenol Positronic | 0 | ||||
| RD37M10LT2C | Amphenol Positronic | 0 | ||||
| RD37M10LVL0/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| RD37M1S500S | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| RD37M1S50TC | Amphenol Positronic | 0 | ||||
 NexGen Digital | MURD320T4G | onsemi | RoHS : Compliant | 120 | ||
| HD404019RD38S | Renesas Electronics Corporation | 43 | ||||
| MBRD360T4G | onsemi | RoHS : Compliant | 22 | |||
 PEI Genesis | RD37M1S500S | Amphenol Positronic | RoHS : Not Compliant |
| 0 | |
| RD37S0000S/AA | Amphenol Positronic |
| 0 | |||
| RD37S100E2S/AA | Amphenol Positronic |
| 0 | |||
| RD37M000E3Z | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| RD37M000V50/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | ||
| RD37M00JT2Z | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| RD37M10000/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | ||
| RD37M100V5Z | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| RD37M10GES | Amphenol Positronic |
| 0 | |||
| RD37S00GE0 | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| RD37S10ANES-50-833.23 | Amphenol Positronic |
| 0 | |||
| RD37M000TX | Amphenol Positronic |
| 0 | |||
| RD37M00JV3S | Amphenol Positronic |
| 0 | |||
| RD37M00JVLS/AA | Amphenol Positronic |
| 0 | |||
| RD37M1000S | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
 Powell Electronics | RD37M0000Z | Amphenol Positronic | D-Sub Connector, 37 contacts |
| 205 | |
| ASJ-194-L-RD-30 | Adam Technologies Inc | Jumper Shunt RoHS : Compliant |
| 66 | ||
| RD37S00000 | Amphenol Positronic | Standard Density D-Sub Connector |
| 32 | ||
| RD37S00000-DIST | Amphenol Positronic | D-Sub Connector, 37 contacts |
| 32 | ||
| RD37M100ES | Amphenol Positronic | D-Sub Connector, 37 contacts RoHS : Not Compliant |
| 26 | ||
| 107-108S-RD-32DE-11S | Glenair Inc | GROUND STRAPS - BRAID CABLING EXTRUDING |
| 20 | ||
| RD37S10Z00 | Amphenol Positronic | D-Sub Connector, 37 contacts |
| 16 | ||
| RD37S00000/AA | Amphenol Positronic | D-Sub Connector RoHS : Compliant |
| 13 | ||
| RD37S100E0 | Amphenol Positronic | D-Sub Connector, 37 contacts |
| 6 | ||
| RD37M1000S | Amphenol Positronic | D-Sub Connector, 37 contacts RoHS : Not Compliant |
| 5 | ||
| RD37M00000 | Amphenol Positronic | Standard Density D-Sub Connector RoHS : Not Compliant |
| 3 | ||
| RD37M10000 | Amphenol Positronic | D-Sub Connector, 37 contacts |
| 3 | ||
| RD37S10LV50 | Amphenol Positronic | RD 37C 37#20 SKT RECP RoHS : Not Compliant |
| 1 | ||
| 901-20RD37-0PN | TE Connectivity | DEUTSCH CONNECTOR 901-20RD37-0PN RoHS : Compliant |
| 1 | ||
| RD37S100E20/AA | Amphenol Positronic | D-SUB CONNECTOR RoHS : Compliant |
| 1 | ||
 Richardson RFPD | CRD300DA12E-XM3 | Wolfspeed | Gate and Power Driver Development Tool RoHS : Compliant |
| 1 | |
| LANEW4812RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LANEUW1212RD3 | Wall Industries Inc | 4 1 Ultra Wide Input Voltage Range Single and Dual RoHS : Compliant | 0 | |||
| LANEUW2415RD3 | Wall Industries Inc | 4 1 Ultra Wide Input Voltage Range Single and Dual RoHS : Compliant | 0 | |||
| LANEUW4815RD3 | Wall Industries Inc | 4 1 Ultra Wide Input Voltage Range Single and Dual RoHS : Compliant | 0 | |||
| LANEW515RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| CRD30DD12N-K | Wolfspeed | 30kW Discrete Interleaved LLC DC-DC Converter RoHS : Not Compliant | 0 | |||
| LANEW2412RD3H | Wall Industries Inc | Module DC-DC 24VIN 2-OUT 12V/-12V 0.125A/-0.125A 3 RoHS : Compliant | 0 | |||
| LANEW4812RD3H | Wall Industries Inc | 3Watts Output DC to DC Converter RoHS : Compliant | 0 | |||
| LANEW2415RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LANEW1215RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LANEW4805RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LANEW515RD3H | Wall Industries Inc | 3Watts Output DC to DCConverter RoHS : Compliant | 0 | |||
| LANEW2412RD3 | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| LANEW505RD3H | Wall Industries Inc | 3Watts Output DC to DCConverter RoHS : Compliant | 0 | |||
 Rutronik | RD3G03BATTL1 | ROHM Semiconductor | P-CH 40V 35A 15mOhm DPAK RoHS : Compliant |
| 100 | |
| RD3R02BBH8SATL1 | ROHM Semiconductor | N-CH 150V 20A 62mOhm TO-252 RoHS : Compliant |
| 90 | ||
| BHI385 SHUTTLE BOARD 3.0 | Bosch Sensortec | BHI385 Shuttle Board 3.0 RoHS : Compliant |
| 5 | ||
| BMV080 SHUTTLE BOARD 3.1 | Bosch Sensortec | Shuttle Board 3.1 BMV080 RoHS : Compliant |
| 3 | ||
| APPLICATION BOARD 3.1 | Bosch Sensortec | Sensor Evaluation Board RoHS : Compliant |
| 3 | ||
| BMA580 SHUTTLE BOARD 3.0 | Bosch Sensortec | Shuttle Board 3.0 BMA580 RoHS : Compliant |
| 1 | ||
| BMA530 SHUTTLE BOARD 3.0 | Bosch Sensortec | Shuttle Board 3.0 BMA530 RoHS : Compliant |
| 1 | ||
 Chip 1 Exchange | RD33F-T7/JM(B1) | NECEL | INSTOCK | 816,398 | ||
MAX6745XKRD3-T | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 25,000 | |||
| RD3A2BY102J | TAIYO YUDEN | INSTOCK | 24,000 | |||
MAX6730AUTRD3+T | Maxim Integrated Products | INSTOCK RoHS : Compliant | 4,910 | |||
| RD3L140SPTL1 | ROHM Semiconductor | INSTOCK RoHS : Compliant | 4,546 | |||
| RD3.6E.T4 | INSTOCK | 3,700 | ||||
| MAX6738XKRD3+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 1,379 | |||
| MBRD340T4 | onsemi | INSTOCK RoHS : Not Compliant | 1,120 | |||
| MBRD340T4 | onsemi | INSTOCK RoHS : Not Compliant | 1,120 | |||
| MAX6730UTRD3+ | Maxim Integrated Products | INSTOCK | 1,090 | |||
| MBRD340T4 | INSTOCK | 860 | ||||
| MAX6731AUTRD3+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 800 | |||
| TUTHDTR-D301H | Murata Manufacturing Co Ltd | INSTOCK | 561 | |||
| MAX6738XKRD3+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 221 | |||
| MBRD360 | INSTOCK | 193 | ||||
 Avnet Abacus | ERJH2RD3300X | Panasonic Electronic Components | High Temperature Thick Film Chip Resistors 0402 05 330Ohm 0 (Alt: ERJH2RD3300X) RoHS : Not Compliant | 0 | ||
| ERJU2RD3301X | Panasonic Electronic Components | SMD Chip Resistor 33 kohm 05 100 mW 0402 1005 Metric Thick Film - Tape and Reel (Alt: ERJU2RD3301X) RoHS : Compliant | 0 | |||
| ERJU3RD3900V | Panasonic Electronic Components | SMD Chip Resistor 390 ohm 05 100 mW 0603 1608 Metric Thick Film - Tape and Reel (Alt: ERJU3RD3900V) RoHS : Compliant | 0 | |||
| ERJU2RD3002X | Panasonic Electronic Components | SMD Chip Resistor 30 kohm 05 100 mW 0402 1005 Metric Thick Film - Tape and Reel (Alt: ERJU2RD3002X) RoHS : Compliant | 0 | |||
| ERJU3RD3601V | Panasonic Electronic Components | SMD Chip Resistor 36 kohm 05 100 mW 0603 1608 Metric Thick Film - Tape and Reel (Alt: ERJU3RD3601V) RoHS : Compliant | 0 | |||
| ERJU3RD3302V | Panasonic Electronic Components | SMD Chip Resistor 33 kohm 05 100 mW 0603 1608 Metric Thick Film - Tape and Reel (Alt: ERJU3RD3302V) RoHS : Compliant | 0 | |||
| KPS200JB-RD-3R3S0 | Vitrohm Portuguesa LDA | Resistor Wire Wound Power 33 Ohm 5 2 W Radial Leaded (Alt: KPS200JB-RD-3R3S0) RoHS : Compliant | 0 | |||
| KPS400KB-RD-3K3S0 | Vitrohm Portuguesa LDA | Resistor 33 kOhm 10 4 W Radial Leaded Wirewound Power (Alt: KPS400KB-RD-3K3S0) RoHS : Compliant | 0 | |||
| KPS200JB-RD-330RS0 | Vitrohm Portuguesa LDA | Resistor 330 Ohm 5 2 W Radial Leaded Wirewound Power (Alt: KPS200JB-RD-330RS0) RoHS : Compliant | 0 | |||
| KPS650JB-RD-300RS0 | Vitrohm Portuguesa LDA | Resistor 300 Ohm 5 65 W Radial Leaded Wirewound Power (Alt: KPS650JB-RD-300RS0) RoHS : Compliant | 0 | |||
| RGU-50FB-RD-332KAA | Vitrohm Portuguesa LDA | Res Rad Metal Glaze Film 0507 332K 1 500 50ppm Old Part RGU52601B332K (Alt: RGU-50FB-RD-332KAA) RoHS : Compliant | 0 | |||
| RGU-50FB-RD-33K2AA | Vitrohm Portuguesa LDA | Resistor 332 kOhm 1 500 mW Radial Leaded Metal Glaze High Temperature (Alt: RGU-50FB-RD-33K2AA) RoHS : Compliant | 0 | |||
| RGU-50FB-RD-36K5AA | Vitrohm Portuguesa LDA | Res Rad Metal Glaze Film 0507 36K5 1 500 50ppm Old Part RGU52601B36K5 (Alt: RGU-50FB-RD-36K5AA) RoHS : Compliant | 0 | |||
| RGU-50GB-RD-330RAA | Vitrohm Portuguesa LDA | Res Rad Metal Glaze Film 330R 2 05W 100ppm Old Part RGU52602B330R (Alt: RGU-50GB-RD-330RAA) RoHS : Compliant | 0 | |||
| KVS800JB-RD-300RAA | Vitrohm Portuguesa LDA | Resistor 300 Ohm 5 8 W Radial Leaded Wirewound Power (Alt: KVS800JB-RD-300RAA) RoHS : Compliant | 0 | |||
Avnet Asia | RD3P050SNTL1 | ROHM Semiconductor | (Alt: RD3P050SNTL1) RoHS : Compliant |
| 12,500 | |
| RD3T050CNTL1 | ROHM Semiconductor | (Alt: RD3T050CNTL1) RoHS : Compliant |
| 5,000 | ||
| RD3P03BBH8SATL1 | ROHM Semiconductor | (Alt: RD3P03BBH8SATL1) RoHS : Compliant | 0 | |||
| RD3L03BBGTL1 | ROHM Semiconductor | (Alt: RD3L03BBGTL1) RoHS : Compliant | 0 | |||
| ERBRD3R00X | Panasonic Electronic Components | (Alt: ERBRD3R00X) RoHS : Compliant | 0 | |||
| RD3G01BATTL1 | ROHM Semiconductor | (Alt: RD3G01BATTL1) RoHS : Compliant | 0 | |||
| RD3S075CNTL1 | ROHM Semiconductor | (Alt: RD3S075CNTL1) RoHS : Compliant | 0 | |||
| RD3L080SNFRATL | ROHM Semiconductor | (Alt: RD3L080SNFRATL) RoHS : Compliant | 0 | |||
| RD3H045SPFRATL | ROHM Semiconductor | (Alt: RD3H045SPFRATL) RoHS : Compliant | 0 | |||
| MURD320T4G | onsemi | Power Rectifier, Ultra-Fast Recovery, Switch-mode, 3 A, 200 V (Alt: MURD320T4G) RoHS : Compliant | 0 | |||
| HPL758040FR33MRD3P | TDK Corporation | (Alt: HPL758040FR33MRD3P) RoHS : Compliant | 0 | |||
| RD3L140SPFRATL | ROHM Semiconductor | (Alt: RD3L140SPFRATL) RoHS : Compliant | 0 | |||
| RD3P130SPFRATL | ROHM Semiconductor | (Alt: RD3P130SPFRATL) RoHS : Compliant |
| 0 | ||
| RD3P05BATTL1 | ROHM Semiconductor | Power MOSFET, P Channel, 100 V, 50 A, 0.041 ohm, TO-252 (DPAK), Surface Mount (Alt: RD3P05BATTL1) RoHS : Compliant | 0 | |||
| RD3P100SNFRATL | ROHM Semiconductor | (Alt: RD3P100SNFRATL) RoHS : Compliant | 0 | |||
 Avnet Silica | MURD320T4G | onsemi | Power Rectifier UltraFast Recovery Switchmode 3 A 200 V (Alt: MURD320T4G) RoHS : Compliant | 30,000 | ||
| MBRD360T4G | onsemi | Schottky Barrier Rectifier 60 V 30 A (Alt: MBRD360T4G) RoHS : Compliant | 22,500 | |||
| FERD30H100SB-TR | STMicroelectronics | Standard Recovery Diode 100 V 30 A Single 620 mV 150 A (Alt: FERD30H100SB-TR) RoHS : Compliant | 7,500 | |||
| FERD30SM100ST | STMicroelectronics | FieldEffect Rectifier Diode non Schottky 100V 30A 3Pin TO220AB Tube (Alt: FERD30SM100ST) RoHS : Compliant | 5,000 | |||
| FERD30H100STS | STMicroelectronics | Diode Rectifying 100V 30A 3Pin TO220AB Tube (Alt: FERD30H100STS) RoHS : Compliant | 3,900 | |||
| FERD30M45CG-TR | STMicroelectronics | FieldEffect Rectifier Diode non Schottky 45V 30A 3Pin D2PAK TR (Alt: FERD30M45CG-TR) RoHS : Compliant | 1,000 | |||
| RD3L08CGN | ROHM Semiconductor | Trans MOSFET NCH 60V 80A 3Pin TO252 Emboss TR (Alt: RD3L08CGN) RoHS : Compliant | 0 | |||
| RD3P200SNTL1 | ROHM Semiconductor | (Alt: RD3P200SNTL1) RoHS : Compliant | 0 | |||
| RD3L03BBGTL1 | ROHM Semiconductor | Power MOSFET N Channel 60 V 50 A 00087 ohm TO252 DPAK Surface Mount (Alt: RD3L03BBGTL1) RoHS : Compliant | 0 | |||
| RD3S100CNTL1 | ROHM Semiconductor | (Alt: RD3S100CNTL1) RoHS : Compliant | 0 | |||
| RD3L07BBGTL1 | ROHM Semiconductor | Power MOSFET N Channel 60 V 115 A 0003 ohm TO252 DPAK Surface Mount (Alt: RD3L07BBGTL1) RoHS : Compliant | 0 | |||
| RD3L140SPTL1 | ROHM Semiconductor | (Alt: RD3L140SPTL1) RoHS : Compliant | 0 | |||
| RD3G01BATTL1 | ROHM Semiconductor | (Alt: RD3G01BATTL1) RoHS : Compliant | 0 | |||
| RD33774PC3EVB | NXP Semiconductors | (Alt: RD33774PC3EVB) RoHS : Compliant | 0 | |||
| RD3P175SNFRATL | ROHM Semiconductor | (Alt: RD3P175SNFRATL) RoHS : Compliant | 0 | |||
 DB Roberts | RD3161500----70 | Essentra Components | RING DETENT PIN 316 DIA X 1-12 | 0 | ||
| FRD3000A | Essentra Components | ROUND FERRULE CAPLDPE BLACK | 0 | |||
 EBV Elektronik | VS-MBRD340TRL-M3 | Vishay Intertechnologies | (Alt: VS-MBRD340TRL-M3) RoHS : Compliant | 30,000 | ||
| MBRD350T4G | onsemi | Schottky Barrier Rectifier 50 V 30 A (Alt: MBRD350T4G) RoHS : Compliant | 0 | |||
| MURD320T4G | onsemi | Power Rectifier UltraFast Recovery Switchmode 3 A 200 V (Alt: MURD320T4G) RoHS : Compliant | 0 | |||
| MBRD340T4G | onsemi | Schottky Barrier Rectifier 40 V 30 A (Alt: MBRD340T4G) RoHS : Compliant | 0 | |||
| FERD30M45CT | STMicroelectronics | FieldEffect Rectifier Diode non Schottky 45V 30A 3Pin TO220AB Tube (Alt: FERD30M45CT) RoHS : Compliant | 0 | |||
| FERD30H60CTS | STMicroelectronics | Diode Switching 60V 30A 3Pin TO220AB Tube (Alt: FERD30H60CTS) RoHS : Compliant | 0 | |||
| FERD30L60CTS | STMicroelectronics | (Alt: FERD30L60CTS) RoHS : Compliant | 0 | |||
| VS-MBRD340-M3 | Vishay Intertechnologies | (Alt: VS-MBRD340-M3) RoHS : Compliant | 0 | |||
| FERD30H100STS | STMicroelectronics | Diode Rectifying 100V 30A 3Pin TO220AB Tube (Alt: FERD30H100STS) RoHS : Compliant | 0 | |||
| FERD30M45CG-TR | STMicroelectronics | FieldEffect Rectifier Diode non Schottky 45V 30A 3Pin D2PAK TR (Alt: FERD30M45CG-TR) RoHS : Compliant | 0 | |||
| FERD30L60CG-TR | STMicroelectronics | (Alt: FERD30L60CG-TR) RoHS : Compliant | 0 | |||
| FERD30H60CG-TR | STMicroelectronics | Diode Switching 60V 30A 3Pin TO263 TR (Alt: FERD30H60CG-TR) RoHS : Compliant | 0 | |||
| VS-MBRD340TR-M3 | Vishay Intertechnologies | (Alt: VS-MBRD340TR-M3) RoHS : Compliant | 0 | |||
| FERD30H100SB-TR | STMicroelectronics | Standard Recovery Diode 100 V 30 A Single 620 mV 150 A (Alt: FERD30H100SB-TR) RoHS : Compliant | 0 | |||
| FERD30SM100DJFTR | STMicroelectronics | Standard Recovery Diode 100 V 30 A Single 970 mV 180 A (Alt: FERD30SM100DJFTR) RoHS : Compliant | 0 | |||
 Flip Electronics | MURD320T4G | onsemi | Stock, Ship Today RoHS : Compliant | 90,000 | ||
| MBRD330RLG | onsemi | Stock, Ship Today RoHS : Compliant | 16,579 | |||
| MBRD340G | onsemi | Stock, Ship Today RoHS : Compliant | 10,279 | |||
| MBRD320G | onsemi | Stock, Ship Today RoHS : Compliant | 2,550 | |||
| MBRD330T4G | onsemi | Stock, Ship Today RoHS : Compliant | 2,500 | |||
| MURD340T4G | onsemi | Stock, Ship Today RoHS : Compliant | 2,500 | |||
| MBRD330G | onsemi | Stock, Ship Today RoHS : Compliant | 1,650 | |||
| MBRD320RLG | onsemi | Stock, Ship Today RoHS : Compliant | 769 | |||
 Maritex | MURD320T4G | onsemi | Rectifier Diodes & Bridges; MURD320T4G; ON SEMICONDUCTOR; 5 �A; 3 A; 3; 75 A RoHS : Compliant |
| 4,237 | |
| VRD3-16RL-T-T/R | Vega Electronics Co Ltd | Rotary switch; 16 positions for BCD code; 10x10mm; horizontal; flat type; SMD. |
| 600 | ||
| RD-35B | Mean Well | Power supply; modular; 35W; 5V; 2.2A; 88-264VAC; 125-373VDC RoHS : Compliant |
| 22 | ||
| RD-3513 | Mean Well | Power supply; modular; 35.1W; 13.5V; 1.3A; 88-264VAC; 125-373VDC RoHS : Compliant |
| 5 | ||
 Master Electronics | RD-35B | Mean Well | The RD-35B is a 35W dual-output switching power supply with 5V and 24V outputs. RoHS : Compliant |
| 925 | |
| PRD-3DH0-24 | TE Connectivity | Power Relay - SPST-NO (DM) (1 Form X) - 24VDC Coil - 20A Contact - 125VDC Switching - Non Latching Coil - Screw Terminal - Chassis Mount. RoHS : Compliant |
| 117 | ||
| PRD-3AY0-24 | TE Connectivity | Power Relay 24VAC 25A SPST-NO-DM(63.3x63.75x57.9)mm RoHS : Compliant |
| 59 | ||
| ERJ-H2RD3602X | Panasonic Electronic Components | 0402 THICK FILM RoHS : Compliant |
| 0 | ||
| ERJ-U2RD3090X | Panasonic Electronic Components | 0402 ANTI-SULFU RoHS : Compliant |
| 0 | ||
| ERJ-U6RD3320V | Panasonic Electronic Components | 0805 ANTI-SULFU RoHS : Compliant |
| 0 | ||
| ARD30024ZQ | Panasonic Electronic Components | RD coaxial swit RoHS : Compliant |
| 0 | ||
| ARD32012 | Panasonic Electronic Components | RD coaxial swit RoHS : Compliant |
| 0 | ||
| ARD3204HQ | Panasonic Electronic Components | RD coaxial swit RoHS : Compliant |
| 0 | ||
| 2GA50-NRD3 | Carling Technologies | G-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| 1MM-R-D38-VS-00-H-TBP | TE Connectivity | SCL 1.0 RCPT DR VT 076 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1MM-R-D31-VS-00-H-TBP | TE Connectivity | SCL 1.0 RCPT DR VT 062 SMT G3 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1MM-R-D39-VS-00-F-TBP | TE Connectivity | SCL 1.0 RCPT DR VT 078 SMT G1 TBK MOQ Reduction RoHS : Compliant |
| 0 | ||
| PSR-SPP-24DCURD34X12X23 | Phoenix Contact | Single-channel contact extension with TBUS interface - 4 N/O contacts - 1 N/C contact - 1 confirmation current path - the contacts have a dropout delay (0.3 ... 3 s) - Cat. 3 - PL d in accordance with EN ISO 13849 - width: 22.5 mm - plug-in Push-in terminal block RoHS : Compliant |
| 0 | ||
| ARD32024Z | Panasonic Electronic Components | RD coaxial swit RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE99W005/RD-36 | Pasternack Enterprises |
| 316 | ||
| PE99W000/RD-36 | Pasternack Enterprises |
| 310 | |||
| PE3C8741/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/RD-36, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/RD-36 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax. |
| 301 | ||
| PE3C8743/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/RD-36, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/RD-36 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/RD-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax. |
| 211 | ||
| PE3C8748/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/RD-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/RD-36 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/RD-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax. |
| 89 | ||
| PE3C8748/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/RD-300, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/RD-300 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/RD-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax. |
| 84 | ||
| PE3C8749/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8749/RD-300, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8749/RD-300 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4855R-RD coax. |
| 51 | ||
| PE3C8749/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8749/RD-36, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8749/RD-36 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-RD coax. |
| 51 | ||
| PE3C8873/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/RD-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/RD-300 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-RD coax. |
| 44 | ||
| PE3C8743/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/RD-300, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/RD-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 36 | ||
| PE3C8741/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/RD-300, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 36 | ||
| PE3C8746/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/RD-300, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/RD-300 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-RD coax. |
| 36 | ||
| PE3C8818/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE3C8814/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/RD-36, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/RD-36 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/RD-36 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8745/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/RD-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/RD-36 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/RD-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
 Sager | RD-35B | Mean Well | Switching Power Supplies 35W 5V/2.2A 24V/1A RoHS : Compliant |
| 85 | |
| RNF-100-3/8-RD-35MM | TE Connectivity | Heat Shrink Tubing & Sleeves | 0 | |||
| PRD-3AY0-24 | TE Connectivity | General Purpose Relays SPST-NO-DM 25A 24VAC RoHS : Compliant | 0 | |||
| ARD32012 | Panasonic Electronic Components | Coaxial Switches RD coaxial swit RoHS : Compliant |
| 0 | ||
| ARD3204HQ | Panasonic Electronic Components | Coaxial Switches RD coaxial swit RoHS : Compliant |
| 0 | ||
| 2GA50-NRD3 | Carling Technologies | Toggle Switches 2GA50NRD3 RoHS : Compliant |
| 0 | ||
| PRD-3DH0-24 | TE Connectivity | General Purpose Relays SPST-NO-DM 24VDC RoHS : Compliant |
| 0 | ||
| RD30-3 | Eaton Bussmann | Control Switches 30A 3P 100kA NON-F UL98 |
| 0 | ||
| SA1C-RD3 | IDEC Corporation | Photoelectric Sensors PHOTOELECTRIC SENSOR | 0 | |||
| CLB-303-12C1N-R-D/30 | Carling Technologies | Circuit Breakers CLB30312C1NRD/30 |
| 0 | ||
| DRD33WH6 | Panduit Corp | Wire Ducting & Raceways 3 PANELMAX DIN RAIL 7.25 x 3.16 White |
| 0 | ||
| 2GK50-NRD3-XRC1 | Carling Technologies | Toggle Switches | 0 | |||
| XRBRD3 | e10cel SYS | XGEN 400W MEDICAL, LOW NOISE WITH RUGGEDISED, FLYING LEAD INPUT CONNECTOR OPTION AND REVERSE FAN |
| 0 | ||
| PRD-3AJ3-24 | TE Connectivity | General Purpose Relays SPST-NO-DM 24VAC 20A Magnetic blowout RoHS : Compliant | 0 | |||
| ARD3004HQ | Panasonic Electronic Components | Coaxial Switches RD coaxial swit RoHS : Compliant |
| 0 | ||
 TE Connectivity | PRD-3DJ0-24 | TE Connectivity | PRD-3DJ0-24=PRD Part Number: PRD-3DJ0-24 | Internal Number: 8-1393127-9 | TE Connectivity RoHS : Compliant |
| 80 | |
| PRD-3AY0-120 | TE Connectivity | PRD-3AY0-120=PRD Part Number: PRD-3AY0-120 | Internal Number: 7-1393127-9 | TE Connectivity RoHS : Compliant |
| 41 | ||
| PRD-3DY0-110 | TE Connectivity | PRD-3DY0-110=PRD Part Number: PRD-3DY0-110 | Internal Number: 9-1393127-4 | TE Connectivity RoHS : Compliant |
| 24 | ||
| PRD-3AG0-120 | TE Connectivity | PRD-3AG0-120=PRD Part Number: PRD-3AG0-120 | Internal Number: 6-1393127-9 | TE Connectivity RoHS : Compliant |
| 16 | ||
 Venkel Ltd. | CTL1206DRD3T | VENKEL LTD | Chip Type LED;1206;Dome Lens;Red(Ultra Bright Red) RoHS : Compliant | 0 | ||
 Vyrian | MAX6439UTBJRD3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 2 Channel, +2.625V, BICMOS, PDSO6 RoHS : Compliant | 11,688 | ||
| MAX6441KAAGRD3+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 2 Channel, 3.3, BICMOS, PDSO8 RoHS : Compliant | 11,035 | |||
| LA070URD31TTI0700 | Littelfuse Inc | Electric Fuse, Very Fast Blow, 700A, 700VAC, 200000A (IR), Inline/holder | 10,864 | |||
| MAX6716AUTMRD3+T | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 2 Channel, +4.375V, BICMOS, PDSO6 RoHS : Compliant | 9,824 | |||
| LA070URD31TTI0250 | Littelfuse Inc | Electric Fuse, Very Fast Blow, 250A, 700VAC, 200000A (IR), Inline/holder | 9,404 | |||
| MAX6440UTBJRD3+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, 3.6, BICMOS, PDSO6 RoHS : Compliant | 9,241 | |||
| MAX6439UTNRRD3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 2 Channel, +2.625V, BICMOS, PDSO6 RoHS : Compliant | 9,018 | |||
| MAX6440UTEGRD3+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, 3.3, BICMOS, PDSO6 RoHS : Compliant | 8,280 | |||
| MAX6440UTMSRD3+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, 2.5, BICMOS, PDSO6 RoHS : Compliant | 8,025 | |||
| MAX6440UTAGRD3+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 2 Channel, +2.625V, BICMOS, PDSO6 RoHS : Compliant | 6,098 | |||
| LA065URD32TTI1100 | Littelfuse Inc | Electric Fuse, Very Fast Blow, 1100A, 650VAC, 200000A (IR), Inline/holder | 5,780 | |||
| RD38F3350LLZDQ0 | Micron Technology Inc | Memory Circuit, Flash+PSRAM, Hybrid, PBGA88 RoHS : Not Compliant | 4,603 | |||
| RD38F1030W0YUQ0 | Micron Technology Inc | Memory Circuit, Flash+PSRAM, Hybrid, PBGA88 RoHS : Not Compliant | 3,236 | |||
| RD38F4040L0YTQ0 | Micron Technology Inc | Memory Circuit, Flash+PSRAM, PBGA88 RoHS : Not Compliant | 2,956 | |||
| ERJH2RD3300X | Panasonic Electronic Components | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 330ohm, 50V, 0.5% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 758 | |||
 Win Source Electronics | MURD320T4G | onsemi | DIODE GEN PURP 200V 3A DPAK RoHS : Compliant |
| 200,000 | |
| MURD320T4 | onsemi | DIODE ULTRA FAST 3A 200V DPAK RoHS : Not Compliant |
| 100,000 | ||
| MBRD360RLG | onsemi | DIODE SCHOTTKY 60V 3A DPAK RoHS : Compliant |
| 50,000 | ||
| RD3L140SPTL1 | ROHM Semiconductor | MOSFET P-CH 60V 14A TO252 / P-Channel 60 V 14A (Ta) 20W (Tc) Surface Mount TO-252 RoHS : Compliant |
| 30,000 | ||
| MBRD360T4G | onsemi | DIODE SCHOTTKY 60V 3A DPAK RoHS : Compliant |
| 30,000 | ||
| MBRD360T4 | onsemi | DIODE SCHOTTKY 60V 3A DPAK RoHS : Not Compliant |
| 30,000 | ||
| RD3H045SPTL1 | ROHM Semiconductor | MOSFET P-CH 45V 4.5A TO252 / P-Channel 45 V 4.5A (Ta) 15W (Tc) Surface Mount TO-252 RoHS : Compliant |
| 16,315 | ||
| RD3L220SNTL1 | ROHM Semiconductor | MOSFET N-CH 60V 22A TO252 / N-Channel 60 V 22A (Ta) 20W (Tc) Surface Mount TO-252 RoHS : Compliant |
| 10,000 | ||
| FERD30SM100ST | STMicroelectronics | DIODE RECT 100V 30A TO220AB RoHS : Compliant |
| 7,540 | ||
| RD3L140SPFRATL | ROHM Semiconductor | MOSFET P-CH 60V 14A TO252 / P-Channel 60 V 14A (Ta) 20W (Tc) Surface Mount TO-252 RoHS : Compliant |
| 7,500 | ||
| RD3L07BATTL1 | ROHM Semiconductor | PCH -60V -70A POWER MOSFET - RD3 RoHS : Compliant |
| 2,500 | ||
| MBRD340T4G | onsemi | DIODE SCHOTTKY 40V 3A DPAK RoHS : Compliant |
| 110 | ||
 Wuhan P&S | MURD320T4G | onsemi | SWITCHMODE Power Rectifier RoHS : Compliant |
| 555,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand