| Os motores de busca de Datasheet de Componentes eletrônicos |
|
P1103-2-RV Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() ComSIT USA | 4816P1102LF | Bourns Inc | AVAILABLE EU | 1,388 | ||
![]() Avnet Silica | NCP110AMX120TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 12V Active Discharge ONSSPCLDO (Alt: NCP110AMX120TBG) RoHS : Compliant | 5,000 | ||
TIP110G![]() | onsemi | Darlington Transistor NPN 60 V 50 W 2 A TO220AB 3 Pins (Alt: TIP110G) RoHS : Compliant | 0 | |||
| STP110N8F6 | STMicroelectronics | (Alt: STP110N8F6) RoHS : Compliant | 0 | |||
| DUP1105SOQ-7 | Diodes Incorporated | Diode TVS Single UniDirection 24V 350W 3Pin SOT23 TR (Alt: DUP1105SOQ-7) RoHS : Compliant | 0 | |||
| NTP110N65S3HF | onsemi | Power MOSFET NChannel SUPERFET III FRFET 650 V 30 A 110 mO TO220 (Alt: NTP110N65S3HF) RoHS : Compliant | 0 | |||
DMP1100UCB4-7![]() | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant | 0 | |||
| SZNUP1105LT1G | onsemi | CAN LIN Bus Protector Single Line ONSSPCPRTCNQK3C1V (Alt: SZNUP1105LT1G) RoHS : Compliant | 0 | |||
| NCP110AMX280TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 28V Active Discharge ONSSPCLDO (Alt: NCP110AMX280TBG) RoHS : Compliant | 0 | |||
| NCP110AMX180TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 18V Active Discharge ONSSPCLDO (Alt: NCP110AMX180TBG) RoHS : Compliant | 0 | |||
| NCP110AMX080TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 08V Active Discharge ONSSPCLDO (Alt: NCP110AMX080TBG) RoHS : Compliant | 0 | |||
| CAP1106-1-AIA-TR | Microchip Technology Inc | Sensor Controller Capacitive 6CH I2CSMBUS 10Pin DFN EP TR (Alt: CAP1106-1-AIA-TR) RoHS : Compliant | 0 | |||
| NCP110AFCT280T2G | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 28V Active Discharge ONSSPCLDO (Alt: NCP110AFCT280T2G) RoHS : Compliant | 0 | |||
| FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 0 | |||
| FP11047_LISA2-RS-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11047_LISA2-RS-PIN) RoHS : Compliant | 0 | |||
| FP11084_LISA2-RS-CLIP | LEDIL | Lens With Black Color And Round Style (Alt: FP11084_LISA2-RS-CLIP) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SDP1108-R | Sensirion | Legacy Product, please select SDP3x/ 8x RoHS : Compliant |
| 0 | |
![]() DB Roberts | MDLSP1-10M-01 | Essentra Components | CB SptDual LckNatural10MM Spc CB Support Dual Lock Natural |
| 2,530 | |
| 500P110-18-02-NTP | Tech-Etch | STKON, NO-SNAG, SOFT STRP, 18, C&B, NO TAPE | 222 | |||
| DWP1100A | Essentra Components |
| 15 | |||
| MBRP1-100-01 | Essentra Components | MINI BARB RIVT PIN,NAT,.100 IN | 0 | |||
| BP1106A | Essentra Components | 1.083 DIA BARREL PLUGLDPE NATU | 0 | |||
| RP110W | Essentra Components | RIVETS PUSHNYLON WHITE | 0 | |||
| UP11-04 | Shercon Inc | ULTRABAKE PLUGS (600F) 11-7/8 | 0 | |||
| BP1102A | Essentra Components | 1.043 DIA BARREL PLUGLDPE NATU | 0 | |||
| SP1-10-01 | Essentra Components | SpacerLockNatural5/8 in Spc Spacer Locking Natural | 0 | |||
| SPP110 | Shercon Inc | LT.GRN ULTRABAKE PULL PLUG (600F) 100/BX | 0 | |||
| 13SP110B | Essentra Components | ROUND SPACER, .194 ID, .313 OD | 0 | |||
| FP110B | Essentra Components | STANDARD THRD PLUG ORPP RED | 0 | |||
| BP1100A | Essentra Components | 1.004 DIA BARREL PLUGLDPE NATU | 0 | |||
| FP110A | Essentra Components | STANDARD THREADED PLUGPP RED | 0 | |||
| DLSP-1-10M-01 | Essentra Components | CB SptDual LckNatural10MM Spc CB Support Dual Lock Natural | 0 | |||
![]() EBV Elektronik | FP11055_LISA2-RS-PIN | LEDIL | Lens With Black Color And Round Style (Alt: FP11055_LISA2-RS-PIN) RoHS : Compliant | 21,400 | ||
| FP11002_LISA2-W-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11002_LISA2-W-PIN) RoHS : Compliant | 9,400 | |||
| NCP110AMX100TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 1V Active Discharge ONSSPCLDO (Alt: NCP110AMX100TBG) RoHS : Compliant | 5,000 | |||
| FP11001_LISA2-M-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11001_LISA2-M-PIN) RoHS : Compliant | 5,000 | |||
| FP11047_LISA2-RS-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11047_LISA2-RS-PIN) RoHS : Compliant | 1,200 | |||
| FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 800 | |||
| FP11082_LISA2-W-CLIP | LEDIL | Lens for Synios P2720 Series LEDs Box (Alt: FP11082_LISA2-W-CLIP) RoHS : Compliant | 700 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| AVSP-1104 | Broadcom Limited | PHY 100Gbps For Backplane Portside and Cable (Alt: AVSP-1104) RoHS : Compliant | 0 | |||
| NTP110N65S3HF | onsemi | Power MOSFET NChannel SUPERFET III FRFET 650 V 30 A 110 mO TO220 (Alt: NTP110N65S3HF) RoHS : Compliant | 0 | |||
| NCP110AMX280TBG | onsemi | LDO Regulator 200 mA Low Vin UltraHigh PSRR 28V Active Discharge ONSSPCLDO (Alt: NCP110AMX280TBG) RoHS : Compliant | 0 | |||
| CAP1106-1-AIA-TR | Microchip Technology Inc | Sensor Controller Capacitive 6CH I2CSMBUS 10Pin DFN EP TR (Alt: CAP1106-1-AIA-TR) RoHS : Compliant | 0 | |||
| RP110N331B-TR-FE | Nisshinbo Micro Devices | (Alt: RP110N331B-TR-FE) RoHS : Compliant | 0 | |||
| RP110Q282D-TR-FE | Nisshinbo Micro Devices | AC 2C 24 SKT PLUG (Alt: RP110Q282D-TR-FE) RoHS : Compliant | 0 | |||
| STT5000N14P110XPSA1 | Infineon Technologies AG | (Alt: SP005566693) RoHS : Compliant | 0 | |||
![]() FDH Electronics | MWDM5L-21PBSP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | ||
| MWDM5L-37SCBRP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MWDM1L-15SBRP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM5L-51PCBRP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM1L-37SBSP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MWDM2L-15PBSP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MWDM2L-31PBSP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM4L-15PBSP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MWDM4L-31PBSP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM1L-9PBRP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM2L-25SBRP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM3L-25SCBRP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MLDM1L-9PCBRP-.110 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| MWDM2L-15SBSP-.110-513 | Glenair Inc | Connector |
| 0 | ||
| MWDM4L-37SCBRP-.110 | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
![]() Flip Electronics | FDFM2P110 | onsemi | Stock, Ship Today RoHS : Compliant |
| 534,000 | |
| NCP110AFCT280T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| NCP110AMX100TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 156,000 | ||
| NCP110AMX120TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 76,549 | ||
| NCP110AMX280TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 66,000 | ||
| PCP1103-P-TD-H | onsemi | Stock, Ship Today RoHS : Compliant |
| 36,000 | ||
| NCP110AFCT080T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| NCP110AFCT060T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| PCP1103-TD-H | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| NCP110AFCT110T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,983 | ||
| NCP110AFCT105T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,977 | ||
| NCP110AMX110TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,759 | ||
| NP110N03PUG-E1-AY | Renesas Electronics Corporation | Stock RoHS : Compliant | 3,200 | |||
| NTP110N65S3HF | onsemi | Stock, Ship Today RoHS : Compliant |
| 185 | ||
![]() Master Electronics | 3339P-1-101LF | Bourns Inc | Res Cermet Trimmer 100 Ohm 10% 0.5W(1/2W) 4(Elec)Turn (7.62 X 6.35mm) Pin Thru-Hole Tube RoHS : Compliant |
| 200 | |
| 3345P-1-102 | Bourns Inc | Res Wirewound Trimmer 1K Ohm 5% 1W 1(Elec)/1(Mech)Turn 5.97mm (11.43 X 5.97mm) Pin Thru-Hole Bag RoHS : Compliant |
| 12 | ||
| FHP-11-02-TM-S-K | Samtec Inc | Conn Power Socket Strip SKT 11 POS 3.96mm Solder ST SMD 11 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| FP-1102SP | TE Connectivity | FP-1102SP=FLXPAC HSNG FSKT 11 MOQ Reduction RoHS : Compliant |
| 0 | ||
| CLP-110-02-FM-D-PA | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-L-D-A-P | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-LM-D-K | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-LTL-D-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-110-02-S-D-A | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-S-D-P-TR | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-S-D-PA | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-STL-D-BE-A-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CHP11002R70FLF | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 2.7 Ohm ±1% - 1W - ±100ppm/°C - Pb Free - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
| 3290P-1-103 | Bourns Inc | Resistor Trimmer Wirewound 10 kOhm ± 5% 1 W 25 Turn Multi Turn Through Hole RoHS : Not Compliant |
| 0 | ||
| 3059P-1-104 | Bourns Inc | Res Cermet Trimmer 100K Ohm 10% 1W 22(Elec)Turn 2.92mm (33.22 X 4.83 X 8mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | PLP1-100-FS | Bivar Inc | LED Light Pipes 3mm FF Smoked Lens .100" Rigid LitePipe |
| 50 | |
| 3057P-1-103M | Bourns Inc | Trimmer Resistors - Through Hole 10Kohms 5% 1 1/4" Panel Mount RoHS : Compliant |
| 50 | ||
| CP1-10G-10 | ABB Low Voltage Products and Systems | Pushbutton Switch; Non-Illum; Flush; Black Plastic Bezel; Mom; 1 NO; Green |
| 50 | ||
| UPP-110S/4 OR UPP-110S/5 | Sony Semiconductor | UPP-110S/4 THERMAL PAPER ( 10 PER BOX) FOR UP-880 and UP-D890 |
| 9 | ||
| VWKP110D | Macromatic Industrial Controls Inc | Voltage Monitoring Relay; Voltage Monitor; Voltage Band |
| 1 | ||
| CP1-10L-10 | ABB Low Voltage Products and Systems | Pushbutton Switch; Non-Illum; Flush; Black Plastic Bezel; Mom; 1 NO; Blue |
| 0 | ||
| 3290P-1-103 | Bourns Inc | Trimmer Resistors - Through Hole 3/8" 10Kohms Sealed Horizontal Adjust 5% RoHS : Compliant |
| 0 | ||
| 3339P-1-101LF | Bourns Inc | Trimmer Resistors - Through Hole 100ohm 5/16" Rnd 4Turn Cermet RoHS : Compliant |
| 0 | ||
| 3345P-1-102 | Bourns Inc | Trimmer Resistors - Through Hole 1/2" RND 1K OHM RoHS : Compliant |
| 0 | ||
| P1-10117 | OTTO Engineering Inc | Basic / Snap Action Switches S/A P1-11612 EX WATERPROOF |
| 0 | ||
| CP1-10R-02 | ABB Low Voltage Products and Systems | Compact Pushbutton - Momentary - Flush - Red - Non-illuminated - Black plastic - 2NC |
| 0 | ||
| DELP-110E | Banner Engineering Corp | CDS LP/LP 11 M/M ST/ST .10 ZSM11X24 2 NP B .102 6., 80802 |
| 0 | ||
| MP1-10CC81 | ABB Low Voltage Products and Systems | Modular Series Clear Push Button Head, Momentary 22mm Cutout |
| 0 | ||
| VAKP110D | Macromatic Industrial Controls Inc | Relay Voltage Monitor 110VDC 10A DPDT |
| 0 | ||
| MAP110-4002G | Bel Power Solutions | Power Supply; AC/DC; Quad Out; 5V/12V/-12V/12V; 12A/5A/1A/1A; 80W; 19 Pin; MAP S |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01725-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 39.37 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm Push-On MCX Plug Right Angle Cable 100 cm Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3W01725-SP1-100CM, can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3W01725-SP1-100CM is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01725-SP1-100CM can also be used in the other direction and will be right angle MCX plug to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax. |
| 114 | |
| PE3W06854-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 100 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-100CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-100CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE2CP1102 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB SMA Coupler From 1 GHz to 4 GHz Rated to 50 Watts. RF coupler part number PE2CP1102 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 1 GHz and a maximum frequency of 4 GHz. Directional coupler part # PE2CP1102 is constructed with a coupling value of 10 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.2. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1102 directional 10 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 103 | ||
| PE70MP1107 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1108 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1108 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a male SMA in and a female F type out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm F type matching pad is brass. 50 Ohm SMA male to 75 Ohm type F female RF impedance pad PE70MP1108 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE2CP1101 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 7 GHz, Maximum Frequency: 12.4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 7 GHz to 12.4 GHz Rated to 50 Watts. RF coupler part number PE2CP1101 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 7 GHz and a maximum frequency of 12.4 GHz. Directional coupler part # PE2CP1101 is constructed with a coupling value of 6 dB and a coupler directivity of 17 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.3 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.3 dB and a maximum VSWR of 1.3. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1101 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 5 | ||
| PE2CP1109 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 2.6 GHz, Maximum Frequency: 5.2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 2.6 GHz to 5.2 GHz Rated to 50 Watts. RF coupler part number PE2CP1109 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2.6 GHz and a maximum frequency of 5.2 GHz. Directional coupler part # PE2CP1109 is constructed with a coupling value of 20 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.25. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1109 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 4 | ||
| PEWCP1103N-50 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-187, Flange Size: None Flange, Flange Type : CPR-187F Flange, Flange Group : Standard, Minimum Frequency: 3.94 MHz, Maximum Frequency: 5.99 MHz, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-187 Waveguide 50 dB Loop Coupler, CPR187F Flange, N Female Coupled Port, 3.94 GHz to 5.99 GHz, Aluminum. Pasternack’s PEWCP1103N-50 is a WR-187 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 3.94 MHz and 5.99 MHz. The PEWCP1103N-50 WR-187 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-187 directional waveguide coupler is rated for a maximum input power (CW) of 2,000 Watts. This 5.99 MHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-187 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 500,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1103N-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 2,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a CPR-187F flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a CPR-187F flange has a minimum coupler directivity of 15 dB. This WR-187 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 4 | ||
| PEWCP1106N-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-430, Flange Size: None Flange, Flange Type : CPR-430F Flange, Flange Group : Standard, Minimum Frequency: 1.72 GHz, Maximum Frequency: 2.61 GHz, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-430 Waveguide 30 dB Loop Coupler, CPR430F Flange, N Female Coupled Port, 1.72 GHz to 2.61 GHz, Aluminum. Pasternack’s PEWCP1106N-30 is a WR-430 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 1.72 GHz and 2.61 GHz. The PEWCP1106N-30 WR-430 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-430 directional waveguide coupler is rated for a maximum input power (CW) of 4,000 Watts. This 2.61 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-430 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 2,000,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1106N-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 4,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a CPR-430F flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a CPR-430F flange has a minimum coupler directivity of 15 dB. This WR-430 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PEWCP1105N-50 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-340, Flange Size: None Flange, Flange Type : CPR-340F Flange, Flange Group : Standard, Minimum Frequency: 2.17 GHz, Maximum Frequency: 3.3 GHz, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-340 Waveguide 50 dB Loop Coupler, CPR340F Flange, N Female Coupled Port, 2.17 GHz to 3.3 GHz, Aluminum. Pasternack’s PEWCP1105N-50 is a WR-340 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 2.17 GHz and 3.3 GHz. The PEWCP1105N-50 WR-340 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-340 directional waveguide coupler is rated for a maximum input power (CW) of 3,000 Watts. This 3.3 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-340 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 2,000,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1105N-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 3,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a CPR-340F flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a CPR-340F flange has a minimum coupler directivity of 15 dB. This WR-340 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PE2CP1108 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 1 GHz to 2 GHz Rated to 50 Watts. RF coupler part number PE2CP1108 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. Directional coupler part # PE2CP1108 is constructed with a coupling value of 20 dB and a coupler directivity of 25 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.15 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.15 dB and a maximum VSWR of 1.1. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1108 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 1 | ||
| PE70MP1101 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1101 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a male N type in and a female type N out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm N type matching pad is brass. 50 Ohm type N male to 75 Ohm type N female RF impedance pad PE70MP1101 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
| PE70MP1104 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
| PEWCP1100S-50 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-90 Waveguide 50 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-50 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-50 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 0 | ||
![]() Venkel Ltd. | UPTF0805-10W-P-1101AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.1K;�0.05% RoHS : Compliant | 0 | ||
| UPTF1206-8W-P-1101CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;1.1K;�0.25% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1101CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;1.1K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1102BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;11K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-XP-1101CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;1.1K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1102BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;11K;�0.1% RoHS : Compliant | 0 | |||
| HPTF0603-QP-1100CT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1102FT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;11K;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1100BT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UP-1101UT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;1.1K;�0.01% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1101BT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;1.1K;�0.1% RoHS : Compliant | 0 | |||
| HPTF2010-UP-1102UT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;11K;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1101AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.1K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1101AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.1K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1100CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | MAX6505UTP110TND | Analog Devices Inc | 7,200 | |||
P1100EBL![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 30A, TO-92 RoHS : Compliant | 6,050 | |||
P1100EBLRP2![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 30A, TO-92 RoHS : Compliant | 5,750 | |||
| P1101DF-1E | Littelfuse Inc | SIDAC, 130V V(BO) Max, MS-012AA RoHS : Compliant | 1,950 | |||
| XCVP1102-2LSEVSVA2785 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2785 RoHS : Compliant | 25 | |||
| XCVP1102-2MLIVFVF1760 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1760 RoHS : Compliant | 25 | |||
| XCVP1102-1LSEVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 24 | |||
| XCVP1102-1HLIVSVA2785 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 23 | |||
| XCVP1102-1LSIVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 21 | |||
| XCVP1102-3LLEVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 21 | |||
| XCVP1102-3HLEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 20 | |||
| XCVP1102-2MSIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 18 | |||
| XCVP1102-1MSEVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 17 | |||
| XCVP1102-1HSEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 16 | |||
| XCVP1102-1MSIVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 16 | |||
![]() Waytek, Inc. | 875-P1-100-2 | MP | Panel Mount High Amp Circuit Breaker, Type III, On-Off 100 Amps, 48VDC |
| 72 | |
| 175-P1-100-2 | MP | 100A Manual Push to Trip Reset 1/4" Stud 90° Panel Mount Circuit Breaker |
| 62 | ||
![]() Win Source Electronics | DMP1100UCB4-7![]() | Diodes Incorporated | MOSFET P-CHA 12V 2.5A WLB0808 / Qualified to AEC-Q101 Standards for High Reliability RoHS : Compliant |
| 990,000 | |
| STP110N8F6 | STMicroelectronics | Trans MOSFET N-CH 80V 110A 3-Pin(3+Tab) TO-220AB Tube / MOSFET N-CH 80V 110A TO-220 RoHS : Compliant |
| 369,000 | ||
| 3386P-1-103LF | Bourns Inc | Res Cermet Trimmer 10K Ohm 10% 0.5W(1/2W) 1(Elec)/1(Mech)Turns 3.15mm (9.53 X 9.53 X 4.83mm) Pin Thru-Hole Tube / TRIMMER 10K OHM 0.5W PC PIN RoHS : Compliant |
| 40,000 | ||
| 8SLVP1104ANLGI | Renesas Electronics Corporation | IC CLK BUFFER 1:4 2GHZ 16VFQFPN / Clock Fanout Buffer (Distribution) IC 1:4 2 GHz 16-VFQFN Exposed Pad RoHS : Compliant |
| 39,800 | ||
| 8SLVP1104ANLGI8 | Renesas Electronics Corporation | IC CLK BUFFER 1:4 2GHZ 16VFQFPN / Clock Fanout Buffer (Distribution) IC 1:4 2 GHz 16-VFQFN Exposed Pad RoHS : Compliant |
| 39,800 | ||
| NX3P1108UK | Nexperia |
| 29,246 | |||
| CAP1106-1-AIA-TR | Microchip Technology Inc | IC TOUCH SENSOR 6CH 10VDFN RoHS : Compliant |
| 15,508 | ||
| CDCLVP1102RGT | Texas Instruments | 1:2 LVPECL Clock Buffer 16-VQFN |
| 12,000 | ||
| CDCLVP1102RG | Texas Instruments | 1:2 LVPECL Clock Buffer 20-VQFN |
| 12,000 | ||
CDCLVP1102RGTR![]() | Texas Instruments | IC CLK BUFFER 1:2 2GHZ 16QFN / Clock Fanout Buffer 2-OUT 1-IN 1:2 16-Pin VQFN EP T/R RoHS : Compliant |
| 11,200 | ||
P1100SDLRP![]() | Littelfuse Inc | SIDACTOR BI 90V 1000A DO214 RoHS : Compliant |
| 10,000 | ||
| ISP1105BS | Nexperia | USB Transceiver 1TR 1.5Mbps/12Mbps |
| 8,081 | ||
| 3006P-1-102LF | Bourns Inc | TRIMMER 1K OHM 0.75W PC PIN RoHS : Compliant |
| 2,000 | ||
| 3006P-1-100LF | Bourns Inc | TRIMMER 10 OHM 0.75W PC PIN SIDE RoHS : Compliant |
| 2,000 | ||
| TLMP1100-GS08 | Vishay Huntington | LED GREEN 0603 SMD / Standard 0603 SMD LED |
| 100 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |