 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
MP2PML Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 ComSIT USA | MP28114DG18LFZ | Monolithic Power Systems | ULTRA-SMALL 1.7MHZ, 600 MILLI AMP, LOW-VOLTAGE SYNCHRONOUS STEP-DOWN CONVERTER Switching Regulator, Current-mode, 1.4A, 2080kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 4,885 | ||
| XRCWHTL1WMP2001 | Cree, Inc. | Electronic Component RoHS : Compliant | 4,000 | |||
| MP2360DGLFZ | Monolithic Power Systems | 1.8A, 24V, 1.4MHz STEP-DOWN CONVERTER Switching Regulator, Current-mode, 1.8A, 1400kHz Switching Freq-Max RoHS : Compliant | 1,770 | |||
| HLMP2500CATG | Avago Technologies | Visible LED RoHS : Compliant | 980 | |||
| LM1117MP25 | National Semiconductor Corporation | 800 MILLIAMP LOW-DROPOUT LINEAR REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PDSO4 RoHS : Compliant | 975 | |||
| LM2937IMP25 | National Semiconductor Corporation | 400 MILLIAMP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, BIPolar, PDSO4 RoHS : Not Compliant | 895 | |||
| 4283SMP2520001 | ims | Electronic Component RoHS : Not Compliant | 610 | |||
| QLMP2976 | Avago Technologies | Electronic Component RoHS : Compliant | 560 | |||
| HLMP2965EG | Avago Technologies | LED LIGHT BAR Dual Color LED, High Efficiency Red/high Performance Green, 8.89mm RoHS : Compliant | 360 | |||
| HLMP2655EF000 | Avago Technologies | LED LIGHT BAR Single Color LED, High Efficiency Red, 8.89mm RoHS : Compliant | 320 | |||
| HLMP2350CATE | Avago Technologies | LED LIGHT BAR Single Color LED, High Efficiency Red, 19.05mm RoHS : Not Compliant | 180 | |||
| HLMP2350 | Avago Technologies | SINGLE IN-LINE LED LIGHT BAR Single Color LED, High Efficiency Red, 19.05mm RoHS : Compliant | 100 | |||
| LP3871EMP25NOPB | Texas Instruments | LDO Regulator Pos 2.5V 0.8A 5-Pin(4+Tab) SOT-223 T/R RoHS : Compliant | 96 | |||
| HLMP2550CATF | Avago Technologies | LED LIGHT BAR Single Color LED, High Performance Green, 19.05mm RoHS : Not Compliant | 90 | |||
| HLMP2600F | Avago Technologies | LED LIGHT BAR Single Color LED Array, High Efficiency Red, 8.89mm RoHS : Compliant | 40 | |||
 GLYN GmbH & Co. KG | TXMP-2550 | Ka-Ro electronics GmbH | Computer On Module - STM32MP255 Dual Core A35, 1. | 8 | ||
| QSMP-2030 | Ka-Ro electronics GmbH | Computer On Module - STM32MP235F Dual Core A35, 1 | 2 | |||
| TXMP-2570 | Ka-Ro electronics GmbH | Computer On Module - STM32MP257 Dual Core A35, 1. | 1 | |||
 PUI | EKMM401VNN680MP25U | United Chemi-Con Inc | RoHS : Compliant | 200 | ||
 Chip 1 Exchange | MP2333CGTL-Z | INSTOCK | 140,000 | |||
| MP2333CGTL-Z | Monolithic Power Systems | INSTOCK RoHS : Compliant | 61,700 | |||
| 1286AS-H-2R2M=P2 | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 28,821 | |||
| MP2307DN-LF-Z | INSTOCK | 6,138 | ||||
| DFE252010P2R2MP2 | Murata Manufacturing Co Ltd | INSTOCK | 2,939 | |||
| MP20046DQ-S-LF-# | INSTOCK | 2,668 | ||||
| HLMP 2500 | INSTOCK | 1,742 | ||||
| MP2VLPS330MC4R2 | INSTOCK | 914 | ||||
| HLMP2350 | Eveready | INSTOCK | 884 | |||
| HLMP-2755-EF000 | Agilent Technologies Inc | INSTOCK | 612 | |||
| MP2VU390MB5R7 | INSTOCK | 257 | ||||
| DMP2130L-7 | DIOIN | INSTOCK | 137 | |||
| MP2978GU-4002-Z | Monolithic Power Systems | INSTOCK | 100 | |||
| MP2-H150-51P1-TG30 | 3M | INSTOCK | 88 | |||
| HLMP-2885 | Broadcom Limited | INSTOCK RoHS : Compliant | 4 | |||
 Avnet Asia | DFE252012P-2R2M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE252012P-2R2M=P2) RoHS : Compliant |
| 15,000 | |
| DMP22D6UT-7 | Diodes Incorporated | (Alt: DMP22D6UT-7) RoHS : Compliant |
| 12,000 | ||
| DFE201210U-1R5M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE201210U-1R5M=P2) RoHS : Compliant |
| 9,000 | ||
| DFE252010F-4R7M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE252010F-4R7M=P2) RoHS : Compliant |
| 6,000 | ||
| DFE252012P-4R7M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE252012P-4R7M=P2) RoHS : Compliant |
| 6,000 | ||
DMP2022LSS-13 | Diodes Incorporated | (Alt: DMP2022LSS-13) RoHS : Compliant |
| 5,000 | ||
| DFE201610E-R68M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE201610E-R68M=P2) RoHS : Compliant | 3,000 | |||
DMP2035UVT-7 | Diodes Incorporated | (Alt: DMP2035UVT-7) RoHS : Compliant |
| 3,000 | ||
| G88MP20005C1HR | Amphenol Corporation | (Alt: G88MP20005C1HR) RoHS : Compliant |
| 800 | ||
| DFE252010F-R22M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE252010F-R22M=P2) RoHS : Compliant | 0 | |||
| DFE201610E-1R0M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE201610E-1R0M=P2) RoHS : Compliant | 0 | |||
| DFE252012F-2R2M=P2 | Murata Manufacturing Co Ltd | (Alt: DFE252012F-2R2M=P2) RoHS : Compliant |
| 0 | ||
| DMP21D2UFA-7B | Diodes Incorporated | (Alt: DMP21D2UFA-7B) RoHS : Compliant | 0 | |||
| RCLAMP2504N.TCT | Semtech Corporation | (Alt: RCLAMP2504N.TCT) RoHS : Compliant | 0 | |||
| G87MP201205PHR | Amphenol Corporation | (Alt: G87MP201205PHR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | MP-2L-SMSM-2K | embedded antenna design (ead) | MP-2L antenna with 2 x 2M RG174 and SMA-Male |
| 0 | |
| MP-2L-SMSM-1K | embedded antenna design (ead) | MP-2L antenna with 2 x 1M RG174 and SMA-Male |
| 0 | ||
| WDMP.2458.A | Taoglas Antenna Solutions | WDMP.2458.A Wi-Fi Including Wi-Fi 6 Mechanical Patch Antenna |
| 0 | ||
RCLAMP2656P.TGT | Semtech Corporation | 3-Line 5V 0.6pF bidir with TVS SLP2018P6 RoHS : Compliant |
| 0 | ||
| CC-WMP255-KIT | Digi International Inc | ConnectCore MP255 Development Kit incl. dev board with ConnectCore MP255 Dual, 8GB eMMC, 1GB DDR4, Wireless SOM RoHS : Compliant |
| 0 | ||
| MP-2LG-SMSMSM-2K | embedded antenna design (ead) | MP-2LG antenna with 3 x 2M RG174 and SMA |
| 0 | ||
| MP-2LG-SMSMSM-1K | embedded antenna design (ead) | MP-2LG antenna with 3 x 1M RG174 and SMA |
| 0 | ||
 Chip-Germany GmbH | MP246STGBU | MPE-Garry GmbH | 116 | |||
| MP243STGB | MPE-Garry GmbH | 30 | ||||
| LM2937IMP-2.5/NOPB | National Semiconductor Corporation | RoHS : Compliant | 5 | |||
 FDH Electronics | MP200-M | Panduit Corp | Harness Mgmt |
| 177 | |
| HAR CASMP2201CY | FDH Electronics | Wire Placehldr | 3 | |||
| 527-530MP29 | Glenair Inc | Backshells & Ac | 2 | |||
| HAR MP25DVS | FDH Electronics | Wire Placehldr | 2 | |||
| D38999/26TH35SN-AMP2 | Amphenol Aerospace | Connector 38999 | 0 | |||
| V15T16-MP200 | Honeywell Sensing and Control | Switches |
| 0 | ||
| TTMS-MP-2.4-9 | TE Connectivity | Identification | 0 | |||
 Maritex | DMP2045U-7 | Diodes Incorporated | MOSFETs; DMP2045U-7; DIODES; 4.3 A; 45 m? RoHS : Compliant |
| 103,954 | |
| DMP2200UDW-13 | Diodes Incorporated | MOSFETs; DMP2200UDW-13; DIODES; 900 mA; 20 V; 260 m? RoHS : Compliant |
| 7,957 | ||
| DMP2035UVT-7 | Diodes Incorporated | MOSFETs; DMP2035UVT-7; DIODES; 5.2 A; 20 V; 45 m?; 12 V RoHS : Compliant |
| 6,000 | ||
| MP20M23F | Amphenol Corporation | Circular Connectors; MP20M23F; AMPHENOL; 4; Cable RoHS : Compliant |
| 3,009 | ||
| TACTDF52H16MP250-JL | Jialong | Tact Switch; SMD; dimensions 5.2x5.2; h=1.5mm; dust-proof; operating force 250gf; button: round |
| 2,972 | ||
TMP236AQDBZRQ1 | Texas Instruments | Temperature Sensors; TMP236AQDBZRQ1; TEXAS INSTRUMENTS; 3; 1.22 mm; 2.92 mm; SOT-23 RoHS : Compliant |
| 2,870 | ||
TMP275AIDR | Texas Instruments | Temperature Sensors; TMP275AIDR; TEXAS INSTRUMENTS; 8; 1.75 mm; SOIC; 4.9 mm RoHS : Compliant |
| 2,567 | ||
| FAN5702UMP20X | onsemi | LED Drivers; FAN5702UMP20X; ON SEMICONDUCTOR; 16; 6; 5.5 V; 2.7 V RoHS : Compliant |
| 1,950 | ||
TMP20AIDCKR | Texas Instruments | Temperature Sensors; TMP20AIDCKR; TEXAS INSTRUMENTS; 5; 1.1 mm; 2 mm; SC RoHS : Compliant |
| 386 | ||
| DMP2022LSS-13 | Diodes Incorporated | MOSFETs; DMP2022LSS-13; DIODES; 10 A; -20 V; 13 m?; 12 V RoHS : Compliant |
| 5 | ||
| WMP-22A PCT R8 SSD 128 WIN 10 PRO P 3 YW | Wincomm Corporation | Fanless panel computer 21.5", medical, EN60601-1, Intel Core i5-5200U 2.2 GHz, RAM 8 GB DDR3, disk SSD 128 GB, WIN 10 IoT Enterprise 2016 Value ML, power supply |
| 1 | ||
 Neutron USA | RCMP20VC4-01 | Littelfuse Inc | Board Mount Current Sensors Residual Current Monitor, 6mA DC/30mA Fault Current Detection, IEC62955, 4 Integrated Conductors, Vertical Mount RoHS : Compliant |
| 50 | |
| HLMP-2885 | Broadcom Limited | LED Bars and Arrays Green Light Bar RoHS : Compliant |
| 50 | ||
| IMP-250-22 | Orion Fans | Fan Accessories Metal Impeller for OAM Open Frame Motor Series, 250mm x 22 Degree |
| 23 | ||
| RCMP20HC3-03 | Littelfuse Inc | Board Mount Current Sensors Residual Current Monitor, 6mA DC/30mA Fault Current Detection, IEC62752, 3 Integrated Conductors, Horizontal Mount RoHS : Compliant |
| 19 | ||
| RCMP20VC2-03 | Littelfuse Inc | Board Mount Current Sensors Residual Current Monitor, 6mA DC/30mA Fault Current Detection, IEC62752, 2 Integrated Conductors, Vertical Mount RoHS : Compliant |
| 19 | ||
| GK1WBM-P27UB00-000L | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Push Pull Connectors Receptacle with break-away locking for rear panel mounting |
| 13 | ||
PMP2490WP | Crydom Inc | Solid State Relays - Industrial Mount 90A 90-280VAC IOP, Elevator Scrw RoHS : Compliant |
| 10 | ||
| CMP250PS24 | XP Power | Power Supply; AC-DC; 24V@10.4A; 5V@1.5A; 12V@0.6A; 80-264V In; Open Frame; Medical; 250W RoHS : Compliant |
| 8 | ||
| EMP2-X4S1-W1 | Innodisk Corporation | mPCIe to four Isolated RS-485 RS-485 x 4 |
| 3 | ||
| SSA-EB1MP-22 | Banner Engineering Corp | E-Stop Button, Panel-Mt, Lockable 44 mm Actuator 2NC/2NO, Screw, 42213 |
| 1 | ||
| PMP2425WP | Crydom Inc | Solid State Relay, Proportional Controller, Phase Angle/Burst Fire, Load: 25A 280VAC, Control: 4-20mA/0-10VDC RoHS : Compliant |
| 0 | ||
| MP2-10L | ABB Low Voltage Products and Systems | MAIN FLUSH BLU PB, Pushbutton, No contact block, Non-illuminated |
| 0 | ||
| PMP2425W | Crydom Inc | Solid State Relay, 10 VDC, SPST-NO, 25A/280V, Zero Switching, PMP Series RoHS : Compliant |
| 0 | ||
| PMP2450WPH | Crydom Inc | Proportional Control SSR; Panel Mt; 280VAC 50A; Control: 0-5/10VDC 4-20mA, IOP; Thermal Pad RoHS : Compliant |
| 0 | ||
| MP2-10R | ABB Low Voltage Products and Systems | Modular Series; Red Push Button Head; Maintained; Momentary; 22mm Cutout |
| 0 | ||
 Pasternack Enterprises US | PE3MP2358 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. TRB 3-Slot Full Crimp Plug with Blunt Cut for 78 Ohm PE-30-02003 Cable., Radio frequency assembly TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2358 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2358 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2358 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003 cable. | 185 | ||
| PE3MP2042 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB 3-Slot Right Angle Plug with Blunt Cut for 78 Ohm M17/176-00002 Cable., Radio frequency assembly TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with right angle TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 right angle TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2042 can also be known as a 1553 right angle TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2042 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with right angle TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB right angle plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2042 can also be used in the other direction and will be blunt cut genderless to right angle TRB plug cable assembly if the opposite connectivity is required. 1553 TRB right angle male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot right angle plug with blunt cut for 78 Ohm M17/176-00002 cable. | 110 | |||
| PE3MP2165-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Slot TRB Plug to Plug for 78 Ohm M17/176-00002, 60" Cable., Radio frequency assembly bend relief 3-Slot TRB plug to plug for 78 Ohm M17/176-00002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Slot TRB plug to plug for 78 Ohm M17/176-00002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3MP2165-60 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3MP2165-60 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Slot TRB plug to plug for 78 Ohm M17/176-00002, 60" cable. |
| 104 | ||
| PE3MP2252-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB 3-Slot Solder/Clamp Plug to TRB 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 .129 O.D. 48" Cable., Radio frequency assembly TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2252-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2252-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2252-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot solder/clamp plug to TRB 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 .129 O.D. 48" cable. |
| 42 | ||
| PE3MP2358-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB 3-Slot Full Crimp Plug with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2358-48 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2358-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2358-48 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Slot full crimp plug with blunt cut for 78 Ohm PE-30-02003, 48" cable. |
| 37 | ||
| PE3MP2156-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Bend Relief 3-Slot TRB Plug with Blunt Cut for 78 Ohm PE-30-02001, 24" Cable., Radio frequency assembly bend relief 3-Slot TRB plug with blunt cut for 78 Ohm PE-30-02001, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Slot TRB plug with blunt cut for 78 Ohm PE-30-02001, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2156-24 can also be known as a 1553 TRB male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut genderless cable assembly PE3MP2156-24 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2156-24 can also be used in the other direction and will be blunt cut genderless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Slot TRB plug with blunt cut for 78 Ohm PE-30-02001, 24" cable. |
| 13 | ||
| PE3MP2192-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. 78 Ohm TRB 3-Slot Solder/Clamp Plug to 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02001 Twinax (.242 O.D.) 36" Cable., Radio frequency assembly 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax (.242 O.D.) 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax (.242 O.D.) 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2192-36 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2192-36 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2192-36 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax (.242 O.D.) 36" cable. |
| 9 | ||
| PE3MP2456-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-24 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-24 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 24" cable. |
| 4 | ||
| PE3MP2177-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug to 3-Lug TRB Solder/Clamp Jack for PE-30-02001 Twinax (.242 O.D.) 12" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2177-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2177-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2177-12 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable. |
| 3 | ||
| PE3MP2177-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. 78 Ohm 3-Slot TRB Solder/Clamp Plug to 3-Lug TRB Solder/Clamp Jack for PE-30-02001 Twinax (.242 O.D.) 60" Cable., Radio frequency assembly 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2177-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2177-60 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2177-60 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm 3-Slot TRB solder/clamp plug to 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 60" cable. |
| 3 | ||
| PE3MP2546-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 12" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-12 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 12" cable. |
| 1 | ||
| PE3MP2396-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. 78 Ohm Bend Relief 3-Slot TRB Solder/Clamp Plug to Bend Relief 3-Lug TRB Solder/Clamp Jack for PE-30-02001 Twinax (.242 O.D.) 12" Cable., Radio frequency assembly 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2396-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2396-12 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2396-12 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02001 twinax (.242 O.D.) 12" cable. |
| 1 | ||
| PE3MP2414-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02001 Twinax 48" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2414-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2414-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2414-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 48" cable. |
| 1 | ||
| PE3MP2540-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02001, 48" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2540-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2540-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02001, 48" cable. |
| 1 | ||
| PE3MP2546-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02002, RF Cable Type: PE-30-02002, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02002, 60" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2546-60 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2546-60 is built with PE-30-02002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02002, 60" cable. |
| 1 | ||
 TE Connectivity | BACA-AMP-226 | TE Connectivity | MICRO MNL RFECEPT HSG SINGLE R Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 3 Receptacle Housing Crimp | Part Number: BACA-AMP-226 | Internal Number: 1445022-3 | TE Connectivity RoHS : Compliant |
| 27,959 | |
| BACA-AMP-220 | TE Connectivity | MOUNTING CLIP, AMPSEAL 16 Primary Product Color: Black Primary Product Material: PA Automotive Connector Accessory Type: Mounting Clip Operating Temperature Range: -40 – 120 °C Operating Temperature Range: -40 – 248 °F Black PA | Ampseal 16 Connectors Mounting Clip | Part Number: BACA-AMP-220 | Internal Number: 1924487-2 | Alias Number: 8252606567 | TE Connectivity RoHS : Compliant |
| 859 | ||
| BACA-AMP-216 | TE Connectivity | AS16,CAP ASSY,ST,02P,N SEAL,CODE C Nominal Voltage Architecture: 240 V 24 V 48 V 12 V Number of Positions: 2 Connector & Housing Type: Cap Connector System: Wire-to-Wire Mating Pin Diameter: 1.5 mm Ampseal 16 Connector Cap - Housings For Male Terminal | 240 V | Part Number: BACA-AMP-216 | Internal Number: 776428-3 | Alias Number: AS16-ST-04-02PC-N | 1.5 mm | TE Connectivity RoHS : Compliant |
| 185 | ||
| AMP-2-2308348-7 | TE Connectivity | CRIMP FLANGE 17 LARGE Strain Relief Accessory Type: Crimp Flange Thread Size: None Packaging Method: Package Packaging Quantity: 1 Operating Temperature Range: -40 – 194 °F Crimp Flange Package 1 | Crimp Flange For Size 4-5 Std/5Ql Shell | Part Number: AMP-2-2308348-7 | Internal Number: 2-2308348-7 | Alias Number: ES1307-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
 Vyrian | DMP2109UVTQ-13 | Diodes Incorporated | Power Field-Effect Transistor, 3.1A I(D), 20V, 0.08ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET | 16,016 | ||
| DSPIC33CK128MP202T-I/2N | Microchip Technology Inc | 16-Bit Size, 64MHz, CMOS, PQCC28 RoHS : Compliant | 10,563 | |||
| HLCP-D100(HLMP-2600) | Broadcom Limited | 9,346 | ||||
| HLMP2350CATE | Broadcom Limited | 8,032 | ||||
| DSPIC33CH64MP202-E/2N | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQCC28 RoHS : Compliant | 6,823 | |||
LMP2231AMAE | Texas Instruments | Operational Amplifier, 1 Func, 275uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 6,761 | |||
| MT42L256M16D1MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 256MX16, CMOS, PBGA220 | 6,397 | |||
| MT42L192M32D2MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 192MX32, 10ns, CMOS, PBGA220 RoHS : Compliant | 6,101 | |||
LMP2014MTX | Texas Instruments | Operational Amplifier, 4 Func, 60uV Offset-Max, BIPolar, PDSO14 RoHS : Not Compliant | 5,952 | |||
| LMP2022MAX | Texas Instruments | Operational Amplifier, 2 Func, 10uV Offset-Max, PDSO8 RoHS : Not Compliant | 5,836 | |||
| DSPIC33CH512MP205-I/M4 | Microchip Technology Inc | Digital Signal Processor, 16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQCC48 RoHS : Compliant | 5,785 | |||
| LP38693MP-2-5-NOPB | Texas Instruments | 5,742 | ||||
| MT42L64M64D3MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 64MX64, CMOS, PBGA220 RoHS : Compliant | 5,486 | |||
| MT42L128M16D1MP-25AT:A | Micron Technology Inc | LPDDR2 DRAM, 128MX16, CMOS, PBGA220 RoHS : Compliant | 5,246 | |||
LMP2231AMFE | Texas Instruments | Operational Amplifier, 1 Func, 275uV Offset-Max, CMOS, PDSO5 RoHS : Not Compliant | 3,436 | |||
 Win Source Electronics | DFE252012F-2R2M=P2 | Murata Manufacturing Co Ltd | FIXED IND 2.2UH 2.3A 82MOHM SMD RoHS : Compliant |
| 180,080 | |
| DFE252012P-1R0M=P2 | Murata Manufacturing Co Ltd | Inductor Power Shielded Wirewound 1uH 20% 1MHz Metal 3.2A 0.042Ohm DCR 1008 T/R / FIXED IND 1UH 4.3A 42 MOHM SMD RoHS : Compliant |
| 180,000 | ||
| DFE201612P-1R0M=P2 | Murata Manufacturing Co Ltd | FIXED IND 1UH 3.3A 54 MOHM SMD / Inductor Power Shielded Wirewound 1uH 20% 1MHz Metal 2.7A 0.054Ohm DCR 0806 T/R RoHS : Compliant |
| 120,000 | ||
| DFE201610E-1R0M=P2 | Murata Manufacturing Co Ltd | FIXED IND 1UH 2.7A 57 MOHM SMD RoHS : Compliant |
| 118,835 | ||
| DMP2004VK-7 | Diodes Incorporated | Trans MOSFET P-CH 20V 0.53A 6-Pin SOT-563 T/R / MOSFET 2P-CH 20V 0.53A SOT-563 RoHS : Compliant |
| 88,800 | ||
| DMP2066LDM-7 | Diodes Incorporated | MOSFET P-CH 20V 4.6A SOT-26 RoHS : Compliant |
| 60,000 | ||
DMP2123LQ-7 | Diodes Incorporated | MOSFET P-CH 20V 3A SOT23 RoHS : Compliant |
| 57,567 | ||
| MP28164GD-P | Monolithic Power Systems | IC REG BUCK BOOST ADJ 4.2A 11QFN |
| 56,340 | ||
| DFE252010F-4R7M=P2 | Murata Manufacturing Co Ltd | FIXED IND 4.7UH 1.4A 240 MOHM RoHS : Compliant |
| 45,560 | ||
| MP2625BGL-Z | Monolithic Power Systems | IC BATT CHG LI-ION 1CELL 20QFN RoHS : Compliant |
| 38,520 | ||
| TMP275AIDGKR/TMP275AIDGKT | Texas Instruments |
| 35,000 | |||
| RCLAMP2504N.TCT | Semtech Corporation | TVS DIODE 2.5VWM 15VC 10SLP RoHS : Compliant |
| 28,080 | ||
MP28258DD-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 3A 12QFN RoHS : Compliant |
| 27,192 | ||
| MP2315GJ-LF-Z | MPS Industries |
| 19,410 | |||
| MP2617AGL-Z | Monolithic Power Systems | IC BATT CHG LI-ION 1CELL 20QFN RoHS : Compliant |
| 4,311 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand