| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty.
BuyNow |
TME | SMP-11V-BC
| JST Manufacturing | Connector: wire-wire; plug; female; data; PIN: 11; 3A; straight
RoHS : Not Compliant | 1,000 : $0.133
500 : $0.141
456 : $0.151
|
| 1,572
 |
SMP-11V-NC
| JST Manufacturing | SM; PIN: 11; 3A; straight; crimped
RoHS : Compliant | | 999
|
APAMP-111
 | Abracon Corporation | BEIDOU,Galileo,GLONASS,GNSS,GPS; 4.5dBi; 50Ω; male,SMA; 38mm
RoHS : Compliant | | 500
|
TMP117AIDRVR
 | Texas Instruments | IC: temperature sensor; -55÷150°C; WSON6; SMD; Accur: ±0.1°C; 16bit
RoHS : Compliant | 1,000 : $5.02
250 : $5.39
100 : $6.32
25 : $7.06
10 : $7.51
3 : $8.14
1 : $8.4
|
| 106
|
APAMP-116
 | Abracon Corporation | BEIDOU,Galileo,GLONASS,GNSS,GPS; 5dBi; SMA; 44mm; -40÷80°C; RG174
RoHS : Compliant | | 11
|
NSDEMP11XV6T1G
| onsemi | Diode: switching; SMD; 80V; 0.1A; 4ns; SOT563; Ufmax: 1.2V; reel,tape
RoHS : Compliant | 16,000 : $0.0652
8,000 : $0.0679
4,000 : $0.0768
2,000 : $0.0854
1,000 : $0.0938
500 : $0.102
100 : $0.1205
10 : $0.153
1 : $0.28
|
| 0
 |
EMP11T2R
| ROHM Semiconductor | Diode: switching; SMD; 80V; 0.1A; 4ns; SOT563; Ufmax: 1.2V; Ifsm: 4A
RoHS : Compliant | 40,000 : $0.0581
16,000 : $0.0615
8,000 : $0.0645
1,000 : $0.0778
500 : $0.0841
100 : $0.1035
10 : $0.149
1 : $0.24
|
| 0
|
A22E-MP-11
| OMRON Corporation | Switch: emergency stop; 22mm; Stabl.pos: 2; NC + NO; red; none; A22E
RoHS : Compliant | 10 : $55.88
5 : $60.18
1 : $64.48
|
| 0
|
PMP11-AA1U1QBWJJ
| Endress+Hauser Management AG | Converter: pressure; -1÷16bar; 10÷30VDC; 4÷20A; relative pressure | | 0
|
TMP114BIYMTR
| Texas Instruments | IC: temperature sensor; -40÷125°C; PICOSTAR4; SMD; Accur: ±0.2°C
RoHS : Compliant | 500 : $1.1
100 : $1.17
50 : $1.22
10 : $1.31
5 : $1.36
1 : $1.56
|
| 0
|
TMP114DIYMTR
| Texas Instruments | IC: temperature sensor; -40÷125°C; PICOSTAR4; SMD; Accur: ±0.2°C
RoHS : Compliant | 3,000 : $1.11
1,000 : $1.16
500 : $1.2
100 : $1.32
50 : $1.38
10 : $1.52
5 : $1.59
1 : $1.81
|
| 0
|
TMP114NBIYMTR
| Texas Instruments | IC: temperature sensor; -40÷125°C; PICOSTAR4; SMD; Accur: ±1°C
RoHS : Compliant | 100 : $0.63
50 : $0.653
25 : $0.676
10 : $0.72
1 : $0.81
|
| 0
|
PMP11-AA1U1PBWJJ
| Endress+Hauser Management AG | Converter: pressure; -1÷10bar; 10÷30VDC; 4÷20A; relative pressure | | 0
|
PMP11-AA1L1FBWJJ
| Endress+Hauser Management AG | Converter: pressure; -400÷400mbar; 10÷30VDC; 4÷20A; 0.5%; PMP11 | | 0
|
PMP11-AA1U1PBWBJ
| Endress+Hauser Management AG | Converter: pressure; -1÷10bar; 10÷30VDC; 4÷20A; relative pressure | | 0
|
ComSIT USA | TMP112AIDRLR
 | Texas Instruments | AVAILABLE EU
RoHS : Compliant | | 2,852
|
NexGen Digital | TMP117AIYBGR
| Texas Instruments |
RoHS : Compliant | | 100
|
Powell Electronics | CBI-RJTEMP111
| Altech Corporation | Temperature Probe, 1meter, DC-UPS | | 1
|
Chip 1 Exchange | TMP117MAIYBGR
| Texas Instruments | INSTOCK
RoHS : Compliant | | 434
|
AMP1116202-1
| TE Connectivity | INSTOCK | | 29
|
Avnet Asia | DMP1100UCB4-7
 | Diodes Incorporated | (Alt: DMP1100UCB4-7)
RoHS : Compliant | 150,000 : $0.18529
75,000 : $0.18976
30,000 : $0.19444
15,000 : $0.19937
9,000 : $0.20192
6,000 : $0.20455
3,000 : $0.20724
|
| 15,000
|
TLMP1100-GS15
| Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2-Pin SMD T/R (Alt: TLMP1100-GS15)
RoHS : Compliant | | 0
|
UMP11NTN
| ROHM Semiconductor | (Alt: UMP11NTN)
RoHS : Compliant | | 0
|
NSDEMP11XV6T1G
| onsemi | 80 V Common Anode Switching Diode, quad, two duals. (Alt: NSDEMP11XV6T1G)
RoHS : Compliant | | 0
|
Braemac Americas-Symmetry | APAMP-111
| Abracon Corporation | I type GPS antenna module (Adhesive Base)
RoHS : Compliant | | 0
|
APAMP-116
| Abracon Corporation | X type GPS antenna module (Adhesive Base)
RoHS : Compliant | | 0
|
DB Roberts | 22MP11815
| Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | | 0
|
62MP1187
| Essentra Components | | | 0
|
62MP1187N
| Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | | 0
|
22MP11815W
| Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | | 0
|
62MP1187W
| Essentra Components | HOLE PLUG, SNAP IN , 1.187 IN | | 0
|
Flip Electronics | NSDEMP11XV6T5G
| onsemi | Stock, Ship Today
RoHS : Compliant | | 32,000
|
Maritex | TMP117AIDRVR
| Texas Instruments | Temperature Sensors; TMP117AIDRVR; TEXAS INSTRUMENTS; 6; 800 �m; 2 mm
RoHS : Compliant | 1,000 : $0.739
500 : $0.783
100 : $0.875
30 : $1.026
10 : $1.228
1 : $1.506
|
| 13,026
|
TMP119AIYBGR
| Texas Instruments | Temperature Sensors; TMP119AIYBGR; TEXAS INSTRUMENTS; 6; 500 �m; 1 mm
RoHS : Compliant | | 5,998
|
TMP116NAIDRVR
 | Texas Instruments | Temperature Sensors; TMP116NAIDRVR; TEXAS INSTRUMENTS; 6; 800 �m; 2 mm
RoHS : Compliant | 1,000 : $1.233
500 : $1.292
100 : $1.44
30 : $1.665
10 : $1.913
1 : $2.338
|
| 2,999
|
XMP-11V
| JST Manufacturing | Rectangular Terminals; XMP-11V; JST
RoHS : Compliant | 1,000 : $0.139
500 : $0.149
100 : $0.167
30 : $0.185
10 : $0.25
1 : $0.338
|
| 488
|
Pasternack Enterprises US | PE70MP1105
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1105 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a female type N in and a female N type out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type N matching pad is brass. 50 Ohm type N female to 75 Ohm type N female RF impedance pad PE70MP1105 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with N type to N type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
|
| 11
|
PE70MP1102
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm N Male to 50 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1102 from Pasternack has type N connector in and is 75 Ohm, type N connector out and is 50 Ohm. This coaxial N type to N type impedance matching pad has a male type N in and a female type N out. Our 75 Ohm type N to 50 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 75 Ohm type N male to 50 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 75 Ohm type N to 50 Ohm type N matching pad is brass. 75 Ohm N type male to 50 Ohm N type female RF impedance pad PE70MP1102 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55
|
| 11
|
PE70MP1109
| Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1109 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a female SMA in and a female type F out. Our 50 Ohm SMA to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA female to 75 Ohm type F female RF impedance pad PE70MP1109 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 9
|
PE70MP1103
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1103 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to type F impedance matching pad has a male type N in and a female type F out. Our 50 Ohm N type to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type male to 75 Ohm type F female RF impedance pad PE70MP1103 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $131.99
25 : $125.39
50 : $118.79
100 : $113.51
|
| 7
|
PE70MP1110
| Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1110 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to type F impedance matching pad has a female TNC in and a female F type out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm type F matching pad is brass. 50 Ohm TNC female to 75 Ohm F type female RF impedance pad PE70MP1110 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 5
|
PE70MP1111
| Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1111 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to F type impedance matching pad has a female TNC in and a male type F out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm F type matching pad is brass. 50 Ohm TNC female to 75 Ohm type F male RF impedance pad PE70MP1111 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 5
|
PE70MP1107
| Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 5
|
PE70MP1108
| Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1108 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a male SMA in and a female F type out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm F type matching pad is brass. 50 Ohm SMA male to 75 Ohm type F female RF impedance pad PE70MP1108 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09
|
| 5
|
PE70MP1112
| Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: BNC, Connector Out Gender: Male, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm BNC Male to 50 Ohm BNC Male Matching Pad Operating from DC to 3 GHz. Pasternack’s PE70MP1112 RF impedance matching pad (also known as coaxial matching pad) has a 75 Ohm BNC male connector in and a 50 Ohm BNC male connector out. This coaxial matching pad can operate at frequencies ranging from DC to 3 GHz. Our BNC to BNC RF matching pad has brass body material with tri-metal over copper body plating. This impedance matching pad is stocked to be readily available for same-business-day shipment. The impedance matching pad is used to match the different impedances between two devices, maximizing power transfer between the two impedances. This radio frequency BNC male to BNC male matching pad has a typical attenuation of 4 dB. The PE70MP1112 impedance matching pad from Pasternack is suitable for CATV/cable networks, test and measurement, communication systems and wireless systems. This RF matching pad offers a maximum VSWR of 1.25:1. Pasternack’s BNC to BNC RF matching pad has a maximum input power rating (CW) of 0.5 Watts. This impedance matching pad is designed to withstand temperatures ranging from -30 to 70 degrees C. Our matching pad has a length of 2.02 inches, a width of 0.57 inches, and a weight of 0.03 lbs. Additional dimensions and specifications for this RF impedance matching pad are on our downloadable PDF datasheet above. This 75 Ohm to 50 Ohm matching pad is just part of over one million RF microwave and millimeter wave components supplied by Pasternack. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to BNC male RF impedance matching pad for your requirements. | 1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85
|
| 4
|
PE70MP1106
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
|
| 3
|
PE70MP1101
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1101 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a male N type in and a female type N out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm N type matching pad is brass. 50 Ohm type N male to 75 Ohm type N female RF impedance pad PE70MP1101 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81
|
| 1
|
PE70MP1100
| Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06
|
| 0
|
PE70MP1104
| Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. | 1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39
|
| 0
|
Relay Specialties | MP1-10G
| ABB Low Voltage Products and Systems | ABB Modular Pushbutton Momentary, with green actuator and 22mm mounting | | 8
|
TE Connectivity | KUMP-11D18-12
| TE Connectivity | KUMP-11D18-12=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-12 | Internal Number: 7-1393116-1 | TE Connectivity
RoHS : Compliant | 100 : $79.03
50 : $82.79
25 : $86.55
10 : $90.32
1 : $94.08
|
| 166
|
KUMP-11D18-24
| TE Connectivity | KUMP-11D18-24=KU- Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 15 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUMP-11D18-24 | Internal Number: 7-1393116-2 | TE Connectivity
RoHS : Compliant | 100 : $78.97
50 : $82.73
25 : $86.49
10 : $90.25
1 : $94.01
|
| 148
|
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand