| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MP1100-Z-RV Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() TME | FMP100JR-52-1R2 | YAGEO Corporation | Resistor: metal film; 1.2Ω; THT; 1W; ±5%; -55÷155°C; axial; 6.3mm RoHS : Compliant |
| 5,000 | |
| DMP10H400SE-13 | Diodes Incorporated | Transistor: P-MOSFET; unipolar; -100V; -2.1A; 2W; SOT223 RoHS : Compliant |
| 335 | ||
| PJMP120N60EC_T0_00001 | PanJit Semiconductor | Transistor: N-MOSFET; unipolar; 600V; 30A; Idm: 69A; 235W; TO220AB |
| 196 | ||
| 34:1 25DX52L MM MP 12V | Pololu Corporation | Motor: DC; with gearbox; Medium Power; 12VDC; 2.1A; Shaft: D spring |
| 5 | ||
| 172:1 METAL GEARMOTOR 25DX71L MM MP 12V | Pololu Corporation | Motor: DC; with encoder,with gearbox; Medium Power; 12VDC; 2.1A |
| 2 | ||
| NMP-1690 | NATEC | Hub USB; USB 3.0; microSD,microSDHC,microSDXC,SD,SDHC,SDXC |
| 1 | ||
| BE42LMP/10 | Beta Electric | Wrench: combination spanner; 10mm; Overall len: 172mm; 42LMP |
| 0 | ||
| CUS350MP-1000-24 | TDK-Lambda Corporation | Power supply: switching; open; 0.35kW; 120÷370VDC; 85÷265VAC; PCB |
| 0 | ||
| DILMP125(RAC240) | Eaton Corporation | Contactor: 4-pole; NO x4; 240VAC; on panel,for DIN rail mounting |
| 0 | ||
| MP173AGJ-Z | Monolithic Power Systems | IC: PMIC; AC/DC switcher; Uout: 700VDC; TSOT23-5; reel,tape RoHS : Compliant |
| 0 | ||
| MP174GS-Z | Monolithic Power Systems | IC: PMIC; AC/DC switcher; Uout: 700VDC; SO8; reel,tape RoHS : Compliant |
| 0 | ||
| PMP11-AA1L1FBWJJ | Endress+Hauser Management AG | Converter: pressure; -400÷400mbar; 10÷30VDC; 4÷20A; 0.5%; PMP11 |
| 0 | ||
| MSMP12A-M3/89A | Vishay Intertechnologies | Diode: TVS; 150W; 13.3÷14.7V; 7.5A; unidirectional; TransZorb® RoHS : Compliant |
| 0 | ||
| PMP12RG | Carlo Gavazzi Holding AG | Sensor: photoelectric; Range: 0.15÷12m; SPDT; DARK-ON,LIGHT-ON |
| 0 | ||
| DMP1200UFR4-7 | Diodes Incorporated | Transistor: P-MOSFET; unipolar; -12V; -2A; 1.26W; X2-DFN1010-3 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | QLMP1494 | Hewlett Packard Co | Electronic Component RoHS : Not Compliant | 27,500 | ||
| SMP100120 | SGS Semiconductor Ltd | TRISIL COMMUNICATION EQUIPMENT PROTECTION Silicon Surge Protector, 160V V(BO) Max, 60A, DO-214AA RoHS : Not Compliant | 12,500 | |||
| HLMP1503DE000CATD | Avago Technologies | T-1 (3 MM) DIFFUSED LED LAMP Single Color LED, High Performance Green, Diffused, T-1, 3mm RoHS : Compliant | 3,000 | |||
| LM2937IMP12NOPB | Texas Instruments | 500 MILLIAMP LOW DROPOUT REGULATOR Fixed Positive LDO Regulator, 12V, 1V Dropout, BIPolar, PDSO4 RoHS : Compliant | 3,000 | |||
| HLMP1700 | Hewlett Packard Co | Low Current LED Lamp Single Color LED, High Efficiency Red, Tinted Diffused, T-1, 3mm RoHS : Not Compliant | 2,965 | |||
| SMP100LC120 | STMicroelectronics | TRISIL FOR TELECOM EQUIPMENT PROTECTION Silicon Surge Protector, 150V V(BO) Max, 24A, DO-214AA RoHS : Compliant | 2,500 | |||
| HLMP1521E0002BIN4G | Avago Technologies | T-1 (3 MM) HIGH INTENSITY LED LAMP Single Color LED, High Performance Green, Tinted Nondiffused, T-1, 3mm RoHS : Compliant | 1,800 | |||
| MP1530DQLFP | Monolithic Power Systems | TRIPLE OUTPUT STEP-UP PLUS LINEAR REGULATOR FOR TFT BIAS Switching Regulator, Current-mode, 3.6A, 1400kHz Switching Freq-Max RoHS : Compliant | 998 | |||
| L138A8QMP1IDTGBINR | Kingbright | Electronic Component RoHS : Compliant | 670 | |||
| MP1409ESLFZ | Monolithic Power Systems | Electronic Component RoHS : Compliant | 535 | |||
| HLMP1601CATG | Avago Technologies | LED RoHS : Compliant | 500 | |||
| HLMP1440HIB00CATIBIN3 | Agilent Technologies Inc | LED RoHS : Not Compliant | 500 | |||
TMP123AIDBVT![]() | Texas Instruments | 1.5 CENTI GRADE ACCURATE DIGITAL TEMPERATURE SENSOR WITH SPI INTERFACE Serial Switch/Digital Sensor, 12 Bit(s), 1.50Cel, Rectangular, 6 Pin, Surface Mount RoHS : Compliant | 215 | |||
TMP117MAIDRVR![]() | Texas Instruments | HIGH-ACCURACY, LOW-POWER, DIGITAL TEMPERATURE SENSOR Serial Switch/Digital Sensor, 16 Bit(s), 0.1Cel, Square, Surface Mount RoHS : Compliant | 150 | |||
| IMP11E01E01N01N01N01N01W000A | Emerson Embedded Power | Switching Power Supply Module, 11 W, 5 V output, enclosed, for industrial and embedded power applications RoHS : Not Compliant | 1 | |||
![]() GLYN GmbH & Co. KG | QSMP-1570H | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 257 | ||
| QSMP-1570W | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 5 | |||
| MP1-11TGS-1145G7E | MiTAC International Corporation | Fanless embedded system with Intel© Tiger Lake-UP3 | 2 | |||
| QSMP-1530C | Ka-Ro electronics GmbH | QFN Style Solder Computer On Module STM32MP157C Du | 1 | |||
![]() Interstate Connecting Components | NX-K10WAM-P16WBC0-0000 | Amphenol Nexus | RANGER HD 16POS IN LIN RCPT 28AWG IP68/69 USB2.0 |
| 75 | |
| G87MP122202CHR | Amphenol Commercial | MINI POWER PLUS 4.2MM | 0 | |||
| MP12B23T | Amphenol Sine Systems | SIZE 12 PIN CONTACT, MACHINED, | 0 | |||
| AD-SMPPSMPMP-1 | Amphenol RF | SMP PLUG TO SMPM PLUG ADAPTER | 0 | |||
| DCMP-17H5P-J-K127 | ITT Interconnect Solutions | DCMP17H5PJK127 | 0 | |||
| G87MP101212P1HR | Amphenol Commercial | MINI POWER PLUS 4.2MM | 0 | |||
| G87MP161405CHR | Amphenol Commercial | G87MP161405CHR | 0 | |||
| G88MP100011C1EU | Amphenol Commercial | G88MP100011C1EU-MICRO PWR PLUS | 0 | |||
| G88MP121020CREU | Amphenol Commercial | MICRO POWER PLUS 3.0MM | 0 | |||
| G88MP12102CEU | Amphenol Commercial | G88MP12102CEU-MICRO POWER PLUS | 0 | |||
| MP-165102-10-8A | TE Connectivity | RoHS : Compliant |
| 0 | ||
| MP10A23S-25 | Amphenol Sine Systems | Machine,pin contact,3.6mm |
| 0 | ||
| DBMP-17X2P-J-K127 | ITT Interconnect Solutions | DBMP17X2PJK127 | 0 | |||
| DBMP-13X3P-J-K87 | ITT Interconnect Solutions | DBMP13X3PJK87 RoHS : Compliant | 0 | |||
| DBMP-17X2S-J-A197 | ITT Interconnect Solutions | DBMP17X2SJA197 RoHS : Compliant | 0 | |||
![]() NexGen Digital | SMP1320-079LF![]() | Skyworks Solutions Inc | RoHS : Compliant | 48,069 | ||
| DMP10/68NJ/TR | Knowles CDE | 20,314 | ||||
| SMP1304-011 | Alpha & Omega Semiconductor | 14,242 | ||||
| SMP-13203 | 1,440 | |||||
| HLMP-1521 | Avago Technologies | RoHS : Compliant | 955 | |||
| RCLAMP1521P,TCT | Diodes Incorporated | 800 | ||||
TMP1075DSGR![]() | Texas Instruments | RoHS : Compliant | 800 | |||
TMP108AIYFFR![]() | Texas Instruments | RoHS : Compliant | 794 | |||
ZXMP10A13FTA![]() | Diodes Incorporated | RoHS : Compliant | 670 | |||
| MP1305-2R1M | 100 | |||||
TMP117AIYBGR![]() | Texas Instruments | RoHS : Compliant | 100 | |||
| MP-1 20.0000 MHZ | MtronPTI | 85 | ||||
| CTSMP196 | CTS Corporation | 42 | ||||
| RCLAMP1521P.TCT | Semitech Semiconductor | 26 | ||||
![]() PEI Genesis | NX-K10WAM-P16WBC0-0000 | Amphenol Corporation |
| 100 | ||
| DBMP17H2PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| FMP.1M.308.XLCT | LEMO connectors | RoHS : Compliant |
| 0 | ||
| MP10A23S-25 | Amphenol Sine Systems |
| 0 | |||
| DAMP15PCK87 | ITT Interconnect Solutions |
| 0 | |||
| DAMP15SJK126 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DBMMP17W2PJ | ITT Interconnect Solutions |
| 0 | |||
| DCMP13X6SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DAMMP15PF | ITT Interconnect Solutions |
| 0 | |||
| MP16M12E06G5 | Amphenol Sine Systems |
| 0 | |||
| DAMMP11X1SP | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DAMP15SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| HSM-P11/2X5 | Sure Seal Connections |
| 0 | |||
| MP10A23F-25 | Amphenol Sine Systems |
| 0 | |||
| MP10B23S | Amphenol Sine Systems |
| 0 | |||
![]() Powell Electronics | G88MP10102KEU | Amphenol Corporation | Connector RoHS : Compliant |
| 1,608 | |
| AL-MP-1000-NT-0-C | Advanced Cable Ties Inc | 1" Mounting Base No Tape Black |
| 1,560 | ||
| G88MP18102KEU | Amphenol Corporation | Connector RoHS : Compliant |
| 1,145 | ||
| AL-MP-1000-0-C | Advanced Cable Ties Inc | Mounting Pads, 1", Black, Rubber Adhesiv |
| 760 | ||
| AL-MP-1000-9-C | Advanced Cable Ties Inc | Mounting Pads, 1", Natural, Rubber Adhes |
| 660 | ||
| HDMP-19-01-S-EM | Samtec Inc | Connector RoHS : Compliant |
| 470 | ||
| GC0WAM-P12UM00-000L | ODU-USA Inc | ODU AMC High-Density size 0|receptacle s |
| 80 | ||
| C10WBM-P16XBC0-0000 | ODU-USA Inc | ODU AMC High-Density size 0|straight plu |
| 77 | ||
| MP10B23S | Amphenol Sine Systems | Connector |
| 66 | ||
| GK0WAM-P12WMM0-000L | ODU-USA Inc | ODU AMC High-Density size 0|receptacle s |
| 52 | ||
| C10WAM-P16XBC0-0000 | ODU-USA Inc | ODU AMC High-Density size 0|straight plu |
| 50 | ||
| GC0WAM-P12WMM0-000L | ODU-USA Inc | ODU AMC High-Density size 0|receptacle s |
| 24 | ||
| MP-103 | Amphenol Corporation | Connector |
| 15 | ||
| RMP1915 | Hammond Manufacturing | INTERNAL CHASSIS 17"WX15"D |
| 12 | ||
| MMP-15PM-1-B-TC3-01 | TE Connectivity | Connectors |
| 1 | ||
![]() PUI | 9111-5MP10S60P10C7PU-A001 | 2,504 | ||||
![]() Richardson RFPD | TCLAMP1202P.TGT | Semtech Corporation | ESD Suppressor Diode Diode Array Uni-Dir 12V 40Vc RoHS : Compliant |
| 10,000 | |
| EKYB350ELL562MMP1S | United Chemi-Con Inc | Cap Aluminum Lytic 5600uF 35V 20% (18 X 35.5mm) Ra RoHS : Compliant | 0 | |||
| MP111A | CTS Corporation | Crystal 11.0592MHz ±30ppm (Tol) ±50ppm (Stability) RoHS : Compliant |
| 0 | ||
| PCLAMP1021P.TNT | Semtech Corporation | High-Surge TVS Diode RoHS : Not Compliant | 0 | |||
| MP150-E | CTS Corporation | Crystal 15MHz ±30ppm (Tol) ±50ppm (Stability) Seri RoHS : Compliant |
| 0 | ||
| WMP10N65C2 | Cyg Wayon Circuit Protection Co Ltd | PWRMOSFET TRANSISTOR RoHS : Compliant | 0 | |||
| SMP1321-005LF | Skyworks Solutions Inc | PIN Diode Switch 100V 3-Pin SOT-23 T/R RoHS : Compliant |
| 0 | ||
| SMP1340-040LF | Skyworks Solutions Inc | Diode PIN Switch 50V 2-Pin SMD T/R RoHS : Compliant |
| 0 | ||
| SMP1345-087LF | Skyworks Solutions Inc | Diode PIN Attenuator/Switch 200mA 2-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| UCLAMP1271P.TNT | Semtech Corporation | ESD Suppressor Diode TVS Uni-Dir 12V 30Vc Automoti RoHS : Compliant |
| 0 | ||
| EKXJ221ELL331MMP1S | United Chemi-Con Inc | Cap Aluminum Lytic 330uF 220V 20% (18 X 35.5mm) Ra RoHS : Compliant | 0 | |||
| EKYB160ELL103MMP1S | United Chemi-Con Inc | Cap Aluminum Lytic 10000uF 16V 20% (18 X 35.5mm) R RoHS : Compliant | 0 | |||
| UCLAMP1521ZVTFT | Semtech Corporation | 1-Line ESD and Surge Protection RoHS : Not Compliant |
| 0 | ||
| 6MP-15F | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| MP120C-E | CTS Corporation | Crystal 12MHz ±30ppm (Tol) ±50ppm (Stability) 32pF RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | TMP103AYFFR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 7,800 | ||
| FMP100JT-52-0R51 | YAGEO Corporation | INSTOCK | 6,474 | |||
| FMP100JT-52-0R22 | YAGEO Corporation | INSTOCK | 6,474 | |||
| FMP100JR-52-0R27 | YAGEO Corporation | INSTOCK RoHS : Compliant | 6,435 | |||
TMP112AIDRLT![]() | Texas Instruments | INSTOCK RoHS : Compliant | 2,714 | |||
| NVIDIA CMP 170HX | NVE Corporation | INSTOCK | 2,468 | |||
| LM2940IMP-12/N0PB | National Semiconductor Corporation | INSTOCK | 1,258 | |||
| FMP100JR-52-22K | YAGEO Corporation | INSTOCK RoHS : Compliant | 966 | |||
| EKMG161E##331MMP1S | United Chemi-Con Inc | INSTOCK | 930 | |||
| HLMP1485 | INSTOCK | 732 | ||||
| MP16RL270MD9 | INSTOCK | 460 | ||||
| EKYB350ELL562MMP1S | United Chemi-Con Inc | INSTOCK | 254 | |||
| ZXMP10A13F | Diodes Incorporated | INSTOCK | 95 | |||
| TMP100KRV | INSTOCK | 89 | ||||
| HLMP-1503 | Avago Technologies | INSTOCK RoHS : Compliant | 9 | |||
![]() Avnet Abacus | MP16M23F | Amphenol Corporation | Circular Connector Contact ecomate RM Pin Crimp 16 AWG 18 AWG (Alt: MP16M23F) RoHS : Compliant | 2,000 | ||
| MP111A | CTS Corporation | (Alt: MP111A) RoHS : Compliant | 0 | |||
| MP11K50 | VPG Foil Resistors | (Alt: MP11K50) RoHS : Compliant | 0 | |||
| CT-6EMP-103 | NIDEC Components | Resistor Trimmer Cermet 10 kOhm 10 500 mW 1 Turn Single Turn Through Hole (Alt: CT-6EMP-103) RoHS : Compliant | 0 | |||
| HDMP-19-01-S-EM | Samtec Inc | Conn SCSI PL 19 POS 05mm Solder ST Edge Mount 19 Terminal 1 Port (Alt: HDMP-19-01-S-EM) RoHS : Compliant | 0 | |||
| FMP100JR-52-2R2 | YAGEO Corporation | Through Hole Resistor 22 Ohm FMP Series 1 W 5 Axial Leaded 350 V Metal Film - Tape and Reel (Alt: FMP100JR-52-2R2) RoHS : Compliant | 0 | |||
| FMP100JR-52-22R | YAGEO Corporation | Through Hole Resistor 22 Ohm FMP Series 1 W 5 Axial Leaded 350 V Metal Film - Tape and Reel (Alt: FMP100JR-52-22R) RoHS : Compliant | 0 | |||
| FMP100JR-52-56K | YAGEO Corporation | Through Hole Resistor 56 kOhm FMP Series 1 W 5 Axial Leaded 350 V Metal Film (Alt: FMP100JR-52-56K) RoHS : Not Compliant | 0 | |||
| FMP100JT-52-120K | YAGEO Corporation | Through Hole Resistor 120 kOhm FMP Series 1 W 5 Axial Leaded 350 V Metal Film (Alt: FMP100JT-52-120K) RoHS : Compliant | 0 | |||
| FMP100JT-52-330R | YAGEO Corporation | Through Hole Resistor 330 Ohm FMP Series 1 W 5 Axial Leaded 350 V Metal Film (Alt: FMP100JT-52-330R) RoHS : Compliant | 0 | |||
| CMP1206-FX-1602ELF | Bourns Inc | - Tape and Reel (Alt: CMP1206-FX-1602ELF) RoHS : Compliant | 0 | |||
| CMP1206AFX-1200ELF | Bourns Inc | - Tape and Reel (Alt: CMP1206AFX-1200ELF) RoHS : Compliant | 0 | |||
| CMP1206AFX-20R5ELF | Bourns Inc | - Tape and Reel (Alt: CMP1206AFX-20R5ELF) RoHS : Compliant | 0 | |||
| CMP1206QFX-43R0ELF | Bourns Inc | - Tape and Reel (Alt: CMP1206QFX-43R0ELF) RoHS : Compliant | 0 | |||
| HRM-P100-3.58PSG(40) | Hirose Electric Co Ltd | (Alt: CL0323-0811-1-40) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NSDEMP11XV6T5G | onsemi | Stock, Ship Today RoHS : Compliant | 32,000 | ||
| FAN5701UMP15X | onsemi | Stock, Ship Today RoHS : Compliant | 3,891 | |||
| FAN5361UMP182X | onsemi | Stock, Ship Today RoHS : Compliant | 2,694 | |||
| MC9S08MP16VLCR | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| S9S08MP16E2MLFR | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| MK22FN256VMP12 | NXP Semiconductors | Stock RoHS : Compliant | 1,521 | |||
| MK22FN512VMP12 | NXP Semiconductors | Stock RoHS : Compliant | 415 | |||
![]() Maritex | SMP100LC-8![]() | STMicroelectronics | TVS Diodes & ESD Suppressors; SMP100LC-8; STMICROELECTRONICS; 6 V; 2; 15 V RoHS : Compliant |
| 27,200 | |
DMP10H4D2S-7![]() | Diodes Incorporated | MOSFETs; DMP10H4D2S-7; DIODES; 270 mA; -100 V; 4.2 ?; 20 V RoHS : Compliant |
| 9,000 | ||
| SMP-10V-BC | JST Manufacturing | Rectangular Connector Housings; SMP-10V-BC; JST; 1 RoHS : Not Compliant |
| 3,992 | ||
| SMP-18V-NC | JST Manufacturing | Rectangular Connector Housings; SMP-18V-NC; JST RoHS : Not Compliant |
| 2,000 | ||
AL8807MP-13![]() | Diodes Incorporated | LED Driver; buck; CH:1; 1MHz; 1.3A; PWM/DC; linear dimming; internal MOSFET transistor; high-efficiency; 6-36V; -40+125 deg.C; SMD; MSOP8 RoHS : Compliant |
| 1,986 | ||
| MP16M23F | Amphenol Corporation | Circular Connectors; MP16M23F; AMPHENOL; 1; No RoHS : Compliant |
| 1,414 | ||
TMP102AIDRLR![]() | Texas Instruments | Temperature Sensors; TMP102AIDRLR; TEXAS INSTRUMENTS; 6; 600 �m; SOT-563; 1.6 mm RoHS : Compliant |
| 1,406 | ||
| AMP181299-1-LF | TE Connectivity | AMP181299-1 terminal, for cable AWG22-18, for connector AMP280590, RoHS |
| 493 | ||
| STM32MP151AAA3 | STMicroelectronics | Application Processors & System-on-Chip (SoC); STM32MP151AAA3; STMICROELECTRONICS RoHS : Compliant |
| 287 | ||
TMP103AYFFR![]() | Texas Instruments | Temperature Sensors; TMP103AYFFR; TEXAS INSTRUMENTS; 4; 625 �m; 1.2 mm RoHS : Compliant |
| 187 | ||
| NMP1K2 | Mean Well | Switching power supply; modular; 1200W; 30V; 5A; 90-264VAC; 120-370VDC |
| 101 | ||
| AL5812MP-13 | Diodes Incorporated | LED Drivers; AL5812MP-13; DIODES; Surface Mount; 1; 1; 8 RoHS : Compliant |
| 100 | ||
TMP100NA/3K![]() | Texas Instruments | Temperature Sensors; TMP100NA/3K; TEXAS INSTRUMENTS; 6; 0 m; SOT-23; 2.9 mm RoHS : Compliant |
| 4 | ||
TMP1075DGKR![]() | Texas Instruments | Temperature Sensors; TMP1075DGKR; TEXAS INSTRUMENTS; 8; 0 m; 3 mm; VSSOP RoHS : Compliant |
| 3 | ||
| AL8860MP-13 | Diodes Incorporated | LED Driver; buck; CH:1; 1MHz; 1.5A; PWM/DC; linear dimming; internal MOSFET transistor; 4.5-40V; -40+85 deg.C; SMD; MSOP8 RoHS : Compliant |
| 1 | ||
![]() Pasternack Enterprises US | PE70MP1109 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1109 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to type F impedance matching pad has a female SMA in and a female type F out. Our 50 Ohm SMA to 75 Ohm F type impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA female to 75 Ohm type F female RF impedance pad PE70MP1109 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 9 | |
| PE70MP1111 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1111 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to F type impedance matching pad has a female TNC in and a male type F out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm F type matching pad is brass. 50 Ohm TNC female to 75 Ohm type F male RF impedance pad PE70MP1111 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE51MP1003 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 144 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 5 | ||
| PE70MP1110 | Pasternack Enterprises | Key Specifications, Connector In Series: TNC, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm TNC Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1110 from Pasternack has TNC connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial TNC to type F impedance matching pad has a female TNC in and a female F type out. Our 50 Ohm TNC to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm TNC female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm TNC to 75 Ohm type F matching pad is brass. 50 Ohm TNC female to 75 Ohm F type female RF impedance pad PE70MP1110 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with TNC to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1107 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm SMA Male to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1107 from Pasternack has SMA connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial SMA to F type impedance matching pad has a male SMA in and a male type F out. Our 50 Ohm SMA to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm SMA to 75 Ohm type F matching pad is brass. 50 Ohm SMA male to 75 Ohm F type male RF impedance pad PE70MP1107 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 5 | ||
| PE70MP1112 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 75 Ohm, Connector Out Series: BNC, Connector Out Gender: Male, Connector Out Impedence: 50 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 75 Ohm BNC Male to 50 Ohm BNC Male Matching Pad Operating from DC to 3 GHz. Pasternack’s PE70MP1112 RF impedance matching pad (also known as coaxial matching pad) has a 75 Ohm BNC male connector in and a 50 Ohm BNC male connector out. This coaxial matching pad can operate at frequencies ranging from DC to 3 GHz. Our BNC to BNC RF matching pad has brass body material with tri-metal over copper body plating. This impedance matching pad is stocked to be readily available for same-business-day shipment. The impedance matching pad is used to match the different impedances between two devices, maximizing power transfer between the two impedances. This radio frequency BNC male to BNC male matching pad has a typical attenuation of 4 dB. The PE70MP1112 impedance matching pad from Pasternack is suitable for CATV/cable networks, test and measurement, communication systems and wireless systems. This RF matching pad offers a maximum VSWR of 1.25:1. Pasternack’s BNC to BNC RF matching pad has a maximum input power rating (CW) of 0.5 Watts. This impedance matching pad is designed to withstand temperatures ranging from -30 to 70 degrees C. Our matching pad has a length of 2.02 inches, a width of 0.57 inches, and a weight of 0.03 lbs. Additional dimensions and specifications for this RF impedance matching pad are on our downloadable PDF datasheet above. This 75 Ohm to 50 Ohm matching pad is just part of over one million RF microwave and millimeter wave components supplied by Pasternack. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal BNC male to BNC male RF impedance matching pad for your requirements. |
| 4 | ||
| PE70MP1106 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1106 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial N type to type F impedance matching pad has a female type N in and a female F type out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm type F matching pad is brass. 50 Ohm type N female to 75 Ohm F type female RF impedance pad PE70MP1106 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PE51MP1008 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 440 MHz, Maximum Frequency: 480 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 2 | ||
| PE70MP1007 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Male To 75 Ohm F Male Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1007 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a male SMA in and a male F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm F male RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA male to 75 Ohm F male RF impedance pad PE70MP1007 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 2 | ||
| PE70MP1104 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Female to 75 Ohm F Male Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1104 from Pasternack has type N connector in and is 50 Ohm, type F connector out and is 75 Ohm. This coaxial type N to F type impedance matching pad has a female N type in and a male type F out. Our 50 Ohm type N to 75 Ohm type F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N female to 75 Ohm type F male RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm type N to 75 Ohm type F matching pad is brass. 50 Ohm N type female to 75 Ohm F type male RF impedance pad PE70MP1104 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to F type connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE70MP1101 | Pasternack Enterprises | Key Specifications, Connector In Series: N, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: N, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm N Male to 75 Ohm N Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1101 from Pasternack has type N connector in and is 50 Ohm, type N connector out and is 75 Ohm. This coaxial type N to type N impedance matching pad has a male N type in and a female type N out. Our 50 Ohm type N to 75 Ohm type N impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm type N male to 75 Ohm N type female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm N type to 75 Ohm N type matching pad is brass. 50 Ohm type N male to 75 Ohm type N female RF impedance pad PE70MP1101 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with type N to type N connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 1 | ||
| PE51MP1001 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 132 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. |
| 1 | ||
| PE51MP1009 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 144 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. |
| 1 | ||
| PE51MP1006 | Pasternack Enterprises | Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 420 MHz, Maximum Frequency: 470 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. |
| 0 | ||
| PE70MP1004 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: 0.009 MHz, Maximum Frequency: 3 GHz. 50 Ohm SMA Female To 75 Ohm F Female Matching Pad Operating From 0.009 MHz to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1004 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a female SMA in and a female F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of 0.009 MHz and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA female to 75 Ohm F female RF impedance matching pad design has a maximum attenuation of 0 and an attenuation accuracy of 0 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is copper. 50 Ohm SMA female to 75 Ohm F female RF impedance pad PE70MP1004 from Pasternack is rated for a maximum VSWR of and a maximum input power of 0 Watt. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 0 | ||
![]() Wuhan P&S | STM32MP133FAE7 | STMicroelectronics | - RoHS : Compliant |
| 200 | |
| STM32MP157AAC3 | STMicroelectronics | Arm dual Cortex-A7 800 MHz + Cortex-M4 MPU RoHS : Compliant |
| 100 | ||
| STM32MP157F-DK2 | STMicroelectronics | - |
| 3 | ||
| STM32MP157D-DK1 | STMicroelectronics | Evaluation board |
| 3 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |