 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
C850.. Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 Verical | C850-2G3R-54 | Bel Fuse | Conn RJ-45 RCP 48 POS Solder RA Thru-Hole 84 Terminal 6 Port Tray RoHS : Exempt |
| 466 | |
| C850-2C2R-54 | Bel Power Solutions | Conn RJ-45 RCP 40 POS 2.54mm Solder RA Thru-Hole 56 Terminal 4 Port Tray RoHS : Exempt |
| 259 | ||
| C850X1100YJJ | Panduit Corp | Labels Component Label Polyester White 215.9x279.4mm RoHS : Compliant |
| 50 | ||
| C850X1100YML | Panduit Corp | Labels Component Label Polyester Silver 215.9x279.4mm |
| 25 | ||
 Avnet Americas | BC850C,235 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R - Tape and Reel (Alt: BC850C,235) RoHS : Compliant | 90,000 | ||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4-Channel 1Gbps 256-Ball BGA Tray - Trays (Alt: VSC8504XKS-05) RoHS : Compliant |
| 90 | ||
| NSVBC850CLT1G | onsemi | - Tape and Reel (Alt: NSVBC850CLT1G) RoHS : Compliant |
| 0 | ||
| NSVBC850CLT1G | onsemi | - Tape and Reel (Alt: NSVBC850CLT1G) RoHS : Compliant |
| 0 | ||
| FDBC850QE1C01 | Coherent Inc | QUADWIRE 400G DIRECT ATTACH COPPER CABLE, 8X50GBPS,QSFP-DD,0 - Bulk (Alt: FDBC850QE1C01) RoHS : Compliant |
| 0 | ||
| EC8508-000 | TE Connectivity | Cable Accessories Heat Shrink Sleeve Low Fire Hazard Green - Boxed Product (Development Kits) (Alt: EC8508-000) RoHS : Compliant | 0 | |||
| KMPC850DECVR66BU | NXP Semiconductors | - Bulk (Alt: KMPC850DECVR66BU) RoHS : Compliant | 0 | |||
C850-100-WH | Bourns Inc | - Tape and Reel (Alt: C850-100-WH) RoHS : Compliant |
| 0 | ||
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4-Channel 1Gbps 256-Ball BGA Tray - Trays (Alt: VSC8504XKS-02) RoHS : Compliant |
| 0 | ||
| VSC8502XML-03 | Microchip Technology Inc | - Trays (Alt: VSC8502XML-03) RoHS : Compliant |
| 0 | ||
| C850X1100YJJ | Panduit Corp | WHITE, POLYESTER LABEL - Labels that come on sheets or rolls (Alt: C850X1100YJJ) RoHS : Compliant |
| 0 | ||
| MPC850VR50BU | NXP Semiconductors | MPU MPC8xx RISC 32-Bit 50MHz 3.3V/5V 256-Pin BGA Tray - Trays (Alt: MPC850VR50BU) RoHS : Compliant | 0 | |||
| NSVBC850BLT1G | onsemi | - Tape and Reel (Alt: NSVBC850BLT1G) RoHS : Compliant |
| 0 | ||
| B32754C8505K | TDK Corporation | Cap Film 5uF 350VAC 580VDC PP 10% Radial Bulk - Bulk (Alt: B32754C8505K000) RoHS : Compliant |
| 0 | ||
| C850-2G4R-54 | Bel Fuse | - Trays (Alt: C850-2G4R-54) RoHS : Compliant |
| 0 | ||
 Arrow Electronics | C850-2G3R-54 | Bel Fuse | Conn RJ-45 RCP 48 POS Solder RA Thru-Hole 84 Terminal 6 Port Tray RoHS : Exempt |
| 466 | |
 Newark | BC850B | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850B RoHS : Compliant |
| 23,075 | |
| BC850B | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850B RoHS : Compliant |
| 23,075 | ||
| BC850B,215 | Nexperia | Transistor, Npn, Sot-23; |Nexperia BC850B,215 RoHS : Compliant |
| 6,743 | ||
| BC850B,215 | Nexperia | Transistor, Npn, Sot-23; |Nexperia BC850B,215 RoHS : Compliant |
| 6,743 | ||
| BC850A | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850A RoHS : Compliant |
| 2,975 | ||
| BC850A-AQ | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850A-AQ RoHS : Compliant |
| 2,750 | ||
| BC850A-AQ | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850A-AQ RoHS : Compliant |
| 2,750 | ||
| BC850C-AQ | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850C-AQ RoHS : Compliant |
| 2,520 | ||
| BC850C-AQ | Diotec Semiconductor AG | Transistor, Npn, 45V, 0.1A, Sot-23; |Diotec Semiconductor BC850C-AQ RoHS : Compliant |
| 2,520 | ||
| SC8-50-S10-C0 | Panduit Corp | Cable Tie, Standard, Nailon 6.6, Black; |Panduit SC8-50-S10-C0 RoHS : Compliant |
| 900 | ||
| B32754C8505K000 | TDK Corporation | Cap, Power Film, 5Uf, 580V, Radial; |Tdk B32754C8505K000 RoHS : Compliant |
| 640 | ||
| TC8500 | L-com Inc | Cable, Network, C5E, 24Awg, 1000', Blue; |L-Com TC8500 RoHS : Compliant |
| 3 | ||
| EC850LCD | CyberPower | Ups, Ite, 12 Outlets, 850Va/450W, 120V; |Cyber Power Systems EC850LCD RoHS : Compliant |
| 3 | ||
| MAQDC-850 | Banner Engineering Corp | Cordset Single Ended M12 8-Pin Straight; |Banner Engineering MAQDC-850 RoHS : Not Compliant |
| 3 | ||
| C-8505-5 | General Devices | Handle; Fixing Centers:4.41"; Handle Material:Aluminum; Thread Size - Metric:-; Thread Size - Imperial:-; Product Range:C-8505 Series Handle Rohs Compliant: Yes |General Devices C-8505-5 RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | HMC8500PM5E | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 128 | |
| HMC850LC3TR | Analog Devices Inc | 1:2 Fanout 26GHz RoHS : Compliant |
| 102 | ||
| EV1HMC8500PM5 | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 42 | ||
| DC850A | Analog Devices Inc | LTC3783 - 3V-14.4Vin to 25V @ |
| 31 | ||
| 125614-HMC850LC3 | Analog Devices Inc | EVALUATION PCB ASSEMBLY RoHS : Compliant |
| 22 | ||
| HMC850LC3 | Analog Devices Inc | 500 Fanout 26GHz RoHS : Compliant |
| 2 | ||
| HMC8500PM5ETR | Analog Devices Inc | High Power GaN Amps- 10W 1 - 2 RoHS : Compliant |
| 0 | ||
| HMC850LC3TR-R5 | Analog Devices Inc | 1:2 Fanout 26GHz RoHS : Compliant |
| 0 | ||
 RS | KT-LED15T8-48GC-850-DX2 | Keystone Technologies LLC | 15W, 2000 LUMEN, 4', 240' BEAM ANGLE, BALLAST BYPASS, 5000K- DLC 4.0, COATED |
| 188 | |
| KT-LED25T5HO-48GC-850-DX2 | Keystone Technologies LLC | 25W, 3400 LUMEN, 4', 240' BEAM ANGLE, BALLAST BYPASS, 5000K, DLC 4.0 |
| 55 | ||
| WLB32C850PBQ (87483) | Banner Engineering Corp | LED LIGHT BAR, INDUSTRIAL, WHITE, 1800 LUMENS, 12-30VDC, 850MM LONG, M12, 87483 |
| 30 | ||
| WLB32ZC850PBQMB (87495) | Banner Engineering Corp | INDUSTRIAL LED LIGHT BAR, 3 FT, HI/LOW/OFF SWITCH, AC, 6 FT POWER CORD, IP50 |
| 16 | ||
| KT-LED25.5T5HO-48GC-850-S | Keystone Technologies LLC | 25W, 3200 LUMEN, 4', 240' BEAM ANGLE, BALLAST COMPATIBLE, 5000K, DLC 4.0 |
| 15 | ||
| WLB32ZC850PBQM (87491) | Banner Engineering Corp | LIGHT BAR, LED, 850MM LONG, 1800 LUMENS, 85-264VAC, SWITCHED, CASCADABLE, 87491 |
| 10 | ||
| BC850R | Tripp Lite | UPS, 850VA, 450W, 120V STANDBY, 5 NEMA 5-15R OUTLETS, 5-15P PLUG, DESKTOP RoHS : Compliant |
| 6 | ||
| WLB32ZC850EPBQMB (97838) | Banner Engineering Corp | WORK LIGHT BAR, 850MM, 90-264 VAC, IP50, WHT, CASCADABLE, QD, WLB32 SERIES |
| 6 | ||
| AFC8503 | Panasonic Electronic Components | PLC PROGRAMMING CABLE ROUND D-SUB, 9-PIN, L-SHAPED TYPE, FP SERIES |
| 2 | ||
| BC850RNC | Tripp Lite | UPS, CLOUD CONNECTED WITH REMOTE, 850VA, 450W, 120V STANDBY, DESKTOP |
| 1 | ||
| WLB32ZC850QM | Banner Engineering Corp | WORK LIGHT BAR;SWITCHLESS;850MM.;85-264VAC;IP50;WHITE;CASCADABLE;96005 |
| 1 | ||
| MAQDC-850 (72511) | Banner Engineering Corp | CORDSET, STRAIGHT M12 FEMALE, 8 CONDUCTOR, 15 M, BLACK PVC, MAQDC SERIES |
| 1 | ||
| KT-RHLED200-14C-850-VDIM-P /G2 | Keystone Technologies LLC | 200W, 5000K, 0-10V DIMMING, PREMIUM SERIES, 90DEG BEAM ANGLE, GENERATION 2 |
| 1 | ||
| KT-LED11.5T8-48GC-850-S (KT-LED11.5T8-48GC-850-S-CP) | Keystone Technologies LLC | LED T8 LAMP,11.5W,1800 LUMEN, 4FT, 220' BEAM,5000K, BALLAST COMPATIBLE, SMARTDRIV |
| 0 | ||
| KT-RKIT19AC-7C-850-FDIM (KT-RKIT19AC-7C-850-FDIM-IP) | Keystone Technologies LLC | ROUND AC LED LIGHT ENGINE KIT, PHASE DIMMING, 7", 19W, 5000K,>80 CRI, FUTURE F |
| 0 | ||
 Microchip Technology Inc | VSC8501XML | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII, QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 4,256 | |
| VSC8502XML | Microchip Technology Inc | 2 Port GbE Cu PHY with (G/RG)MII, QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 760 | ||
| VSC8504XKS-02 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII, PBGA, Projected EOL: 2045-10-19 RoHS : Compliant |
| 94 | ||
TC850CLW | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| TC850ILW | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
TC850CPL | Microchip Technology Inc | 16 Bit Hi Speed A/D, PDIP, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| TC850CLW713 | Microchip Technology Inc | 16 Bit Hi Speed A/D, PLCC, Projected EOL: 2027-05-01 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8504XKS-04 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII (Ind. Temp), PBGA, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8501XML-03 | Microchip Technology Inc | 1 Port GbE Cu PHY with (G/RG)MII (Ind. Temp), QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
| VSC8504XKS-01 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII, PBGA, Projected EOL: 2028-10-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| VSC8502XML-03 | Microchip Technology Inc | 2 Port GbE Cu PHY with (G/RG)MII (Ind. Temp), QFN, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
| VSC8504XKS-05 | Microchip Technology Inc | 4 Port GbE Cu/Fiber PHY with (Q)SGMII (Ind. Temp), PBGA, Projected EOL: 2045-10-19 RoHS : Compliant |
| 0 | ||
 Onlinecomponents.com | C850-2C2R-54 | Bel Power Solutions | CONN JACK 4PORT PCB RoHS : Compliant |
| 259 | |
| C850-2G4R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
| C850-2G6R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
| C850-260-WH | Bourns Inc | TBU Bidirectional 850V 425V 260mA 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-180-WH | Bourns Inc | TBU Bidirectional 850V 425V 180mA 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-100-WH | Bourns Inc | TBU Bidirectional 850V 425V 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| C850-2G3R-54 | Bel Power Solutions | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | BC850C,215 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant |
| 1,060 | |
BC850BW,135 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 10,000 | ||
| BC850C,235 | NXP Semiconductors | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant |
| 20,000 | ||
BC850CW/ZLF | Nexperia | Small Signal Bipolar Transistor, 0.1A, 45V, NPN RoHS : Compliant |
| 230,000 | ||
| BC850C,215 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant |
| 263,259 | ||
| BC850BW,135 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 307,300 | ||
| BC850BLT1G | onsemi | Trans BJTs Single 45V 100mA SOT-23-3 T/R RoHS : Compliant |
| 12,000 | ||
| NSVBC850BLT1G | onsemi | Trans BJTs Single 45V 100mA SOT-23-3 T/R RoHS : Compliant |
| 145,020 | ||
| BC850CMTF | onsemi | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 135,581 | ||
| BC850CE6359HTMA1 | Infineon Technologies AG | Low Noise Transistor RoHS : Compliant |
| 290,000 | ||
| BC850BE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 670,350 | ||
| BC850BWH6327XTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 430,141 | ||
| BC850BMTF | Fairchild Semiconductor Corporation | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 97,500 | ||
| BC850C | Fairchild Semiconductor Corporation | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant |
| 3,000 | ||
| MC8507P | Motorola Mobility LLC | Interrupt Controller, Bipolar, PDIP24 RoHS : Not Compliant |
| 3,788 | ||
 Sager | HCDY1Z600VC850 | Hartland Controls / Littelfuse | 1NO/1NC AUX SWITCH FOR ALL 3 POLES |
| 175 | |
| AFC8503 | Panasonic Electronic Components | PLC PROGRAMMING CABLE ROUND D-SUB, 9-PIN,L-SHAPED TYPE |
| 20 | ||
| NC850-10 | ABB Group | Enclosures, Boxes, & Cases | 0 | |||
| EC8508-000 | TE Connectivity | Heat Shrink Tubing & Sleeves HX095YW2NF044B | 0 | |||
| C850X1100YJJ | Panduit Corp | Wire Labels & Markers Laser/Ink Jet Comp Lbl ADH Poly RoHS : Compliant |
| 0 | ||
| C85041-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TX40SJ90-1610 RoHS : Compliant | 0 | |||
| C850-2G4R-54 | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant |
| 0 | ||
| ABC8500C | ABB Group | SSCREW PED CONN 6-500 8OUTL OI |
| 0 | ||
| 3455RC85070010 | Honeywell Sensing and Control | Thermostats | 0 | |||
| EZC8500SLC3K | ABB Group | AL TFR CONN NO6-500 3 PHASE |
| 0 | ||
| C850-2G8R-54 | Bel Fuse | Modular Connectors / Ethernet Connectors RoHS : Compliant | 0 | |||
| SC8-50-S10-C0 | Panduit Corp | Cable Ties GP CONTR TIES BLK 7.87 L 50LB UV W/R |
| 0 | ||
| C-8505-12 | General Devices | General Devices |
| 0 | ||
| C-8505-5 | General Devices | General Devices |
| 0 | ||
| EZC8500SLRECC | ABB Group | AL TRANS CONN 6-500 INSUL 8OUTL |
| 0 | ||
 Coilcraft Direct | SLR1050C-850KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 236 | |
 TME | BC850B,215 | Nexperia | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; SOT23,TO236AB RoHS : Compliant |
| 9,000 | |
| BC850A | Diotec Semiconductor AG | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; SOT23 RoHS : Compliant |
| 3,872 | ||
| BC850CLT1G | onsemi | Transistor: NPN; bipolar; 45V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 2,835 | ||
| BC850C-AQ | Diotec Semiconductor AG | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; SOT23 RoHS : Compliant |
| 677 | ||
| BC850CE6327 | Infineon Technologies AG | Transistor: NPN; bipolar; 45V; 0.1A; 0.33W; SOT23 RoHS : Compliant |
| 48 | ||
| AB-C8-5,0PUR-M12FS | Lapp Group | Cable: for sensors; PIN: 8; M12 female; straight; 5m; plug; 30VDC |
| 13 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 6mm; L: 55m; Thk: 0.25mm; double-sided; acrylic |
| 10 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 25mm; L: 55m; Thk: 0.25mm; double-sided; acrylic |
| 2 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 19mm; L: 25m; Thk: 0.25mm; double-sided; acrylic |
| 2 | ||
| APC-8-500 | Mean Well | Power supply: switching; LED; 8W; 8÷16VDC; 500mA; 90÷264VAC; IP42 RoHS : Compliant |
| 0 | ||
| BC850BW_R1_00001 | PanJit Semiconductor | Transistor: NPN; bipolar; 45V; 0.1A; 0.25W; SOT323 RoHS : Compliant |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 25mm; L: 5m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 19mm; L: 55m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 12mm; L: 5m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
| AFTC 8502 | AFTC Group | Tape: fixing; W: 12mm; L: 25m; Thk: 0.25mm; double-sided; acrylic |
| 0 | ||
 ComSIT USA | BC850BW115 | Nexperia | AVAILABLE EU | 16,480 | ||
ComSIT USA | BC850C | NXP Semiconductors | NPN GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 23,120 | ||
| BC850BRTKP | KEC | EPITAXIAL PLANAR NPN TRANSISTOR Small Signal Bipolar Transistor RoHS : Compliant | 9,965 | |||
BC850BW | NXP Semiconductors | NPN GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 3,000 | |||
| BC850B | NXP Semiconductors | NPN general purpose transistor Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 2,985 | |||
| BC850BLT1 | onsemi | NPN SILICON GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 2,715 | |||
| BC850CE6327 | Infineon Technologies AG | NPN SILICON AF TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 2,310 | |||
| BC850BLT1G | onsemi | GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236 RoHS : Compliant | 1,670 | |||
XPC850ZT50BU | Freescale Semiconductor | POWERQUICC INTEGRATED COMMUNICATIONS PROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 120 | |||
| TC850CLW | mct | ADC, Multi-Slope, 15-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, CMOS, PQCC44 RoHS : Compliant | 60 | |||
| XPC850SRZT80B | Motorola Semiconductor Products | ONE-CHIP INTEGRATED MICROPROCESSOR RISC Microprocessor, 32-Bit, 80MHz, CMOS, PBGA256 RoHS : Not Compliant | 50 | |||
| XPC850SRZT50BU | Motorola Semiconductor Products | POWERQUICC INTEGRATED COMMUNICATIONS PROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 40 | |||
| XPC850TZP66D3 | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 24 | |||
| XPC850SRCZT50BT | Motorola Semiconductor Products | ONE-CHIP INTEGRATED MICROPROCESSOR RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Not Compliant | 23 | |||
| KXPC850DSLZT50BU | Motorola Semiconductor Products | IC MPU MPC8xx 32Bit 1 Core 50MHz 256-BGA Tray RoHS : Not Compliant | 6 | |||
| XR16C850CMF | Exar Corporation | 2.97V TO 5.5V UART WITH 128-BYTE FIFO Serial I/O Controller, 1 Channel(s), 0.28125MBps, CMOS, PQFP48 RoHS : Not Compliant | 4 | |||
 Interstate Connecting Components | C850-2C2R-54 | Bel Fuse | RoHS : Compliant |
| 42 | |
| TC8501 | L-com Inc |
| 18 | |||
| C85068N001 | TE Connectivity | BSM-25/95 | 0 | |||
| MRJR5C8501 | Amphenol Commercial | HARSH RJ45, IP67, PANEL MOUNT, | 0 | |||
| EC8505-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCHX095YW2DS050B | 0 | |||
| C85074-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55PC4224-24-6/9-92 RoHS : Compliant | 0 | |||
 NexGen Digital | BC850C,215 | NXP Semiconductors | RoHS : Compliant | 2,289 | ||
 Powell Electronics | SDC-850 | Bivar Inc | Snap-In Card Guide, 8.5 in. Length, 0.07 |
| 15,136 | |
 Richardson RFPD | VSC8504XKS-05 | Microchip Technology Inc | PHY 4-CH 10Mbps/100Mbps/1Gbps 3.3V 256-Pin PBGA Tr RoHS : Compliant |
| 0 | |
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4-CH 10Mbps/100Mbps/1Gbps 3.3V 256-Pin PBGA Tr RoHS : Compliant |
| 0 | ||
| VSC8502XML-03 | Microchip Technology Inc | PHY 1-CH 10Mbps/100Mbps/1Gbps 3.3V 135-Pin QFN Tra RoHS : Compliant | 0 | |||
| HMC8500PM5E | Analog Devices Inc | RF Amp Single Power Amp 2.8GHz 32V 32-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| HMC8500PM5ETR | Analog Devices Inc | RF Amp Single Power Amp 2.8GHz 32V 32-Pin LFCSP EP RoHS : Compliant |
| 0 | ||
| DC850A | Analog Devices Inc | LTC3783 LED Driver Development Kit RoHS : Compliant |
| 0 | ||
| HMC850LC3 | Analog Devices Inc | Clock Fanout Buffer 2-OUT 1-IN 1:2 16-Pin CQFN EP RoHS : Compliant |
| 0 | ||
| EV1HMC8500PM5 | Analog Devices Inc | HMC8500PM5E RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| EV1HMC8500LP5D | Analog Devices Inc | HMC8500 RF Amplifier Evaluation Board | 0 | |||
| 125614-HMC850LC3 | Analog Devices Inc | HMC850LC3 Logic and Timing Evaluation Board RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | BC850C_R1_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 123,750 | ||
| BC850CWH6327XTSA1 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 42,000 | |||
| BC850B | INSTOCK | 8,900 | ||||
| BC850CE6327 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 3,820 | |||
| BC850CW E6327 | Infineon Technologies AG | INSTOCK | 3,000 | |||
| BC850CLT1 | INSTOCK | 2,600 | ||||
| VSC8504XKS-05 | Micron Technology Inc | INSTOCK | 400 | |||
| VSC8504XKS-05 | INSTOCK | 400 | ||||
| XPC850ZT50B | INSTOCK | 280 | ||||
| LC850515-E | INSTOCK | 250 | ||||
| VSC8504XKS-05 | Microchip Technology Inc | INSTOCK RoHS : Compliant | 127 | |||
| XPC850SRZT50BU | INSTOCK | 71 | ||||
| XPC850DEZT50BU | INSTOCK | 20 | ||||
| MPC850ZQ50BU | INSTOCK | 13 | ||||
| XPC850SRZT50B | INSTOCK | 4 | ||||
 Avnet Abacus | C85074-000 | TE Connectivity | High Performance Cable 2Conductors 24AWG Silver Plated Copper Alloy WhiteRed Stripe 600Vac (Alt: C85074-000) RoHS : Compliant | 0 | ||
| C850-100-WH | Bourns Inc | - Tape and Reel (Alt: C850-100-WH) RoHS : Compliant | 0 | |||
| C850-260-WH | Bourns Inc | - Tape and Reel (Alt: C850-260-WH) RoHS : Compliant | 0 | |||
| C850-180-WH | Bourns Inc | - Tape and Reel (Alt: C850-180-WH) RoHS : Compliant | 0 | |||
| B32754C8505K | TDK Corporation | Cap Film 5uF 350VAC 580VDC PP 10 Radial Bulk (Alt: B32754C8505K000) RoHS : Not Compliant | 0 | |||
| B32754C8505J | TDK Corporation | 50uF 5 350Vac MKP Wound BOXED (Alt: B32754C8505J000) RoHS : Not Compliant | 0 | |||
| C850-2G4R-54 | Bel Fuse | (Alt: C850-2G4R-54) RoHS : Compliant | 0 | |||
| LXC85-0450SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 189V 045A (Alt: LXC85-0450SW) RoHS : Compliant | 0 | |||
| C850-2G6R-54 | Bel Fuse | (Alt: C850-2G6R-54) RoHS : Compliant | 0 | |||
| LXC85-0700SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 121V 07A (Alt: LXC85-0700SW) RoHS : Compliant | 0 | |||
| LXC85-0350SW | Advanced Energy Industries Inc | LED DRVR Module 1CH IP67 243V 035A (Alt: LXC85-0350SW) RoHS : Compliant | 0 | |||
| C850-2C2R-54 | Bel Fuse | (Alt: C850-2C2R-54) RoHS : Compliant | 0 | |||
| C850-2G3R-54 | Bel Fuse | (Alt: C850-2G3R-54) RoHS : Compliant | 0 | |||
| RCEC850S12R00JB | Vishay Intertechnologies | - Tape and Reel (Alt: P0805E4701FNT) RoHS : Compliant | 0 | |||
| D2TO035C850R0JTE3 | Vishay Intertechnologies | SMD Chip Resistor 850 Ohm 5 35 W Thick Film Power (Alt: D2TO035C850R0JTE3) RoHS : Compliant | 0 | |||
Avnet Asia | BC850BLT1G | onsemi | (Alt: BC850BLT1G) RoHS : Compliant | 0 | ||
| BC850C,215 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850C,215) RoHS : Compliant | 0 | |||
| BC850C,235 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850C,235) RoHS : Compliant | 0 | |||
| BC850B,215 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin TO-236AB T/R (Alt: BC850B,215) RoHS : Compliant | 0 | |||
| BC850CLT1G | onsemi | (Alt: BC850CLT1G) RoHS : Compliant | 0 | |||
| BC850B,235 | Nexperia | (Alt: BC850B,235) RoHS : Compliant | 0 | |||
| BC850BW,115 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin SC-70 T/R (Alt: BC850BW,115) RoHS : Compliant | 0 | |||
| BC850CW,115 | Nexperia | Trans GP BJT NPN 45V 0.1A 3-Pin SC-70 T/R (Alt: BC850CW,115) RoHS : Compliant | 0 | |||
| C850-2A3R-54 | Bel Fuse | (Alt: C850-2A3R-54) RoHS : Compliant | 0 | |||
 Avnet Silica | BC850BLT1G | onsemi | Bipolar BJT Single Transistor NPN 45 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC850BLT1G) RoHS : Compliant | 876,000 | ||
| BC850CW,115 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin SC70 TR (Alt: BC850CW,115) RoHS : Compliant | 870,000 | |||
| BC850B,215 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin TO236AB TR (Alt: BC850B,215) RoHS : Compliant | 36,000 | |||
| TC850CLW | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 44 Pins PLCC (Alt: TC850CLW) RoHS : Compliant | 0 | |||
| BC850C,215 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin TO236AB TR (Alt: BC850C,215) RoHS : Compliant | 0 | |||
| VSC8502XML | Microchip Technology Inc | PHY 2CH 1000Mbps 135Pin QFN (Alt: VSC8502XML) RoHS : Compliant | 0 | |||
| BC850C,235 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin TO236AB TR (Alt: BC850C,235) RoHS : Compliant | 0 | |||
| BC850BW,135 | Nexperia | Trans GP BJT NPN 45V 01A 3Pin SC70 TR (Alt: BC850BW,135) RoHS : Compliant | 0 | |||
| NSVBC850CLT1G | onsemi | NPN Bipolar Transistor SS SOT23 GP XSTR NPN 45V ONSSPCTRNSTVU6M5P (Alt: NSVBC850CLT1G) RoHS : Compliant | 0 | |||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-05) RoHS : Compliant | 0 | |||
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-02) RoHS : Compliant | 0 | |||
| VSC8502XML-03 | Microchip Technology Inc | (Alt: VSC8502XML-03) RoHS : Compliant | 0 | |||
| NSVBC850BLT1G | onsemi | NPN Bipolar Transistor SS SOT23 GP XSTR NPN 45V ONSSPCTRNSTVU6M5P (Alt: NSVBC850BLT1G) RoHS : Compliant | 0 | |||
| VSC8501XML-03 | Microchip Technology Inc | PHY 1CH 135Pin QFN (Alt: VSC8501XML-03) RoHS : Compliant | 0 | |||
| BC850C _R1 _00001 | PanJit Semiconductor | (Alt: BC850C_R1_00001) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | BC850CLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 30,490 | |
| BC850CT/R | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Compliant |
| 17,038 | ||
| C8507-47300 | IN STOCK SHIP TODAY |
| 55 | |||
| LFTC-850+ | Mini-Circuits | IN STOCK SHIP TODAY RoHS : Compliant | 50 | |||
| XPC850CT50BU | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 18 | ||
| PPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 6 | |||
| C8507-47300 | Hewlett Packard Co | IN STOCK SHIP TODAY |
| 5 | ||
| XPC850DEVR50BU | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| XPC850ZT50B | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 3 | |||
| XPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 3 | |||
MPC850DSLVR50BU | Freescale Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| KXPC850SEZT50 | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 2 | ||
| XPC850ZT50BU | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
 EBV Elektronik | BC850BWH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT323 TR (Alt: SP000747416) RoHS : Compliant | 54,000 | ||
| BC850BE6327HTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT23 TR (Alt: SP000010572) RoHS : Compliant | 3,000 | |||
| BC850CWH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT323 TR (Alt: SP000747418) RoHS : Compliant | 3,000 | |||
| TC850CPL | Microchip Technology Inc | Analog to Digital Converter 15 bit MultiSlope 40 SPS Differential Parallel 5 V 40 Pins (Alt: TC850CPL) RoHS : Compliant | 0 | |||
| BC850BLT1G | onsemi | Bipolar BJT Single Transistor NPN 45 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC850BLT1G) RoHS : Compliant | 0 | |||
| VSC8502XML | Microchip Technology Inc | PHY 2CH 1000Mbps 135Pin QFN (Alt: VSC8502XML) RoHS : Compliant | 0 | |||
| BC850CLT1G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC850CLT1G) RoHS : Compliant | 0 | |||
| BC850BW RFG | Taiwan Semiconductor | Transistor GP BJT NPN 45V 01A 3Pin SOT323 Plastic TR (Alt: BC850BW RFG) RoHS : Compliant | 0 | |||
| VSC8504XKS-05 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-05) RoHS : Compliant | 0 | |||
| VSC8504XKS-02 | Microchip Technology Inc | PHY 4Channel 1Gbps 256Ball BGA Tray (Alt: VSC8504XKS-02) RoHS : Compliant | 0 | |||
| VSC8502XML-03 | Microchip Technology Inc | (Alt: VSC8502XML-03) RoHS : Compliant | 0 | |||
| NSVBC850BLT1G | onsemi | NPN Bipolar Transistor SS SOT23 GP XSTR NPN 45V ONSSPCTRNSTVU6M5P (Alt: NSVBC850BLT1G) RoHS : Compliant | 0 | |||
| VSC8501XML-03 | Microchip Technology Inc | PHY 1CH 135Pin QFN (Alt: VSC8501XML-03) RoHS : Compliant | 0 | |||
| BC850CE6327HTSA1 | Infineon Technologies AG | Trans GP BJT NPN 45V 01A 3Pin SOT23 TR (Alt: SP000010563) RoHS : Compliant | 0 | |||
 Flip Electronics | BC850BLT1G | onsemi | Stock RoHS : Compliant | 489,000 | ||
| NSVBC850BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 369,000 | |||
| NSVBC850CLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,944 | ||
| MPC850VR50BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 591 | |||
| MPC850SRVR80BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 120 | |||
| MPC850CVR50BU | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 60 | ||
 Maritex | BC850C | Guangdong Hottech Industrrial Co | Transistor: NPN; bipolar; 45V; 0.1A; 300mW; -55+150 deg.C; SMD; SOT23 |
| 3,317 | |
| APC-8-500 | Mean Well | Power Supply; LED; 8W; 8-16V; 500mA; 90-264VAC; 127-370VDC; IP42 RoHS : Compliant |
| 93 | ||
| BC850C | Diotec Semiconductor AG | Transistor: NPN; bipolar; 45V; 0.1A; 250mW; -55+150 deg.C; SMD; SOT23 RoHS : Compliant |
| 11 | ||
 Master Electronics | 224PHC850K | Illinois Capacitor Inc | Metalized Polypropylene Film Capacitor - 0.22uF ±10% - 850WVDC - +100°C RoHS : Compliant |
| 2,178 | |
| APC-8-500 | Mean Well | AC/DC LED Power Supply - Const Curr - 8W - Fixed: 16 Vdc (OC) @ 500mA - Dim: No RoHS : Compliant |
| 269 | ||
| VSC8502XML | Microchip Technology Inc | PHY 1-CH 10Mbps/100Mbps/1Gbps 3.3V 135-Pin QFN Tray RoHS : Compliant |
| 114 | ||
| VSC8504XKS-05 | Microchip Technology Inc | Ethernet Controller - 4-Channel - 10Mbps/100Mbps/1Gbps - IEEE 802.3 IEEE 802.3af IEEE 802.3az - 1V Supply - 256-PBGA (17x17) - Surface Mount. RoHS : Compliant |
| 60 | ||
| C850X1100YJJ | Panduit Corp | Laser/ink jet component label 8.50 W x 11.0 H adhesive polyester white 1 label/row 1 labels/sheet 25 labels/package. RoHS : Compliant |
| 50 | ||
| JDC-850-019-F000 | Mencom Corporation | JDC Junction Blocks - 5 Pin - 8 Port - No Led - Field Wireable Home Run Connector. RoHS : Compliant |
| 22 | ||
| AFC8503 | Panasonic Electronic Components | Interface - Cable Assembly - Panasonic FP Series - 9.84' (3.00m) RoHS : Compliant |
| 1 | ||
| EC8508-000 | TE Connectivity | HX095YW2NF044B MOQ Reduction RoHS : Compliant |
| 0 | ||
| C850-100-WH | Bourns Inc | TBU Bidirectional 850V 425V 1us DFN SMD T/R RoHS : Compliant |
| 0 | ||
| VSC8504XKS-02 | Microchip Technology Inc | Quad Port QSGMII Dual Media PHY with EEE Support - 1 Circuit - 1V Supply - 256-PBGA (17x17) - Surface Mount. RoHS : Compliant |
| 0 | ||
| C85041-000 | TE Connectivity | TX40SJ90-1610 MOQ Reduction RoHS : Compliant |
| 0 | ||
| TC850CLW | Microchip Technology Inc | Single Channel ADC - Multi-Slope - 40sps - 15-bit+Sign Parallel - 44-Pin PLCC - Tube RoHS : Compliant |
| 0 | ||
| BC850B | Diotec Semiconductor AG | BJT - SOT-23 - 45V - 100mA - NPN - 0.25W - 150°C RoHS : Compliant |
| 0 | ||
| BC850B-AQ | Diotec Semiconductor AG | BJT - SOT-23 - 45V - 100mA - NPN - 0.25W - 150°C - AEC-Q101 RoHS : Compliant |
| 0 | ||
| JDC-850-019-C050 | Mencom Corporation | JDC Junction Blocks - 5 Pin - 8 Port - No Led - 5 Meters of Home Run Cable RoHS : Compliant |
| 0 | ||
 Neutron USA | EC850LCD | CyberPower | CyberPower EC850LCD Ecologic 850VA/510W Energy Efficient LCD Desktop ECO UPS |
| 585 | |
| WLB32C850PBQ | Banner Engineering Corp | LED Light Bar; Industrial; White; 1800 Lumens; 12-30VDC; 850mm Long; M12; 87483 |
| 50 | ||
| C850-2G3R-54 | Bel Power Solutions | Modular Connectors / Ethernet Connectors RJ45 Connector |
| 50 | ||
| MAQDC-850 | Banner Engineering Corp | Cordset, Str M12 F 8p to cut end, 15m, Black PVC Jacket, 72511 |
| 22 | ||
| WLB32ZC850EPBQMB | Banner Engineering Corp | Work Light Bar;Switched Hi/Low/Off;850mm;85-264VAC;IP50;White;Cascadable |
| 19 | ||
| WLB32ZC850PBQM | Banner Engineering Corp | Light Bar, LED, L: 850mm, 2250 Lumens, 85-264VAC, Switched, white Cascadable, QD, 87491 |
| 14 | ||
| WLB32C850EPBQ | Banner Engineering Corp | Work Light Bar;Switched Hi/Low/Off;850mm;12-30VDC;IP40;White;Cascadable |
| 13 | ||
| WLB32ZC850EPBQM | Banner Engineering Corp | LED Light Bars & Light Strips WLB32 Work Light Bar; Switched Hi/Low/Off; Length: 850 mm; Voltage: 90-264 V ac; Environmental Rating: IP50; Color: White; Cascadable; Eye Shield; QD - No Power cord; Diffuse window |
| 9 | ||
| WLB32ZC850QM | Banner Engineering Corp | Work Light Bar;Switchless;850mm;90-264VAC;White;Cascadable; QD, 96004 |
| 6 | ||
| WLB32C850Q | Banner Engineering Corp | Work Light Bar;No Switch;850mm;12-30VDC;IP50;White;Cascadable;Euro 4-pin |
| 3 | ||
| WLB32C850PBQ, 87483 | Banner Engineering Corp | Industrial Light Bars & Light Strips WLB32 Work Light Bar; Switched Hi/Low/Off; Length: 850 mm; Voltage: 12-30 V dc; Environmental Rating: IP50; Color: White; Cascadable; 4-pin M12 Integral QD; Diffuse Window |
| 0 | ||
| WLB32C850PB | Banner Engineering Corp | LED Light Bar; White; 2250 Lumens; 12-30VDC; L: 850mm; 2m cable; 87487 |
| 0 | ||
| WLB32ZC850QMB | Banner Engineering Corp | Wlb32 Work Light Bar, Switchless, Length, 850 mm |
| 0 | ||
| WLB32C850MQ | Banner Engineering Corp | Work Light Bar;Motion Sensor;850mm;12-30VDC;White;Cascadable, QDM12, 97315 |
| 0 | ||
| AFC8503 | Panasonic Electronic Components | PLC Programming Cable Round D-Sub, 9-Pin, L-Shaped Type, FP Series |
| 0 | ||
 Pasternack Enterprises US | PE3C8508/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 24 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 24 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-24 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 84 | |
| PE3C8508/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 84 | ||
| PE3C8508/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8508/WP-50CM can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8508/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8508/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8508/WP-50CM can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 84 | ||
| PE3C8502-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 24 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to type N cable is a male to female coax assembly, PE3C8502-24, can also be known as a low PIM 7/16 DIN plug to N type jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-24 can also be used in the other direction and will be N type female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C8503-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 60 inches. Outdoor Rated 7/16 DIN Male to N Female Bulkhead Low PIM Cable 60 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female bulkhead low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female bulkhead low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type bulkhead cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a male to female coax assembly, PE3C8503-60, can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8503-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8503-60 can also be used in the other direction and will be type N female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female bulkhead low PIM cable 60 inch length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3C8507-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 7/16 DIN Female to N Male Low PIM Cable 24 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN female to N male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN female to N male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM 7/16 DIN to N type cable assemblies have a female gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a female to male coax assembly, PE3C8507-24, can also be known as a low PIM 7/16 DIN jack to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to N type plug cable assembly PE3C8507-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8507-24 can also be used in the other direction and will be N type male to 7/16 DIN female cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN female to N male low PIM cable 24 inch length using SPO-250 coax using Times Microwave parts. |
| 11 | ||
| PE3C8507/WP-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 19.685 inches. Waterproof IP68 7/16 DIN Female (Jack) to N Male (Plug) Low Loss Cable 50 CM Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN female (jack) to N male (plug) low loss cable 50 cm length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low loss 7/16 DIN to type N IP68 cable assembly has a female gender on end 1 and a male on end 2. PE3C8507/WP-50CM can also be known as a low loss 7/16 DIN jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8507/WP-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN female to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN jack to type N plug cable assembly PE3C8507/WP-50CM is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8507/WP-50CM can also be used in the other direction and will be a type N male to 7/16 DIN female cable assembly if the opposite connectivity is required. Low loss 7/16 DIN jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low loss RF cable assembly as per your requirements. |
| 11 | ||
| PE3C8504-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 7/16 DIN Male Right Angle to N Male Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3C8504-150CM, can also be known as a low PIM right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8504-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8504-150CM can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts. |
| 10 | ||
| PE3C8504/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) Right Angle to N Male (Plug) Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) right angle to N male (plug) low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C8504/WP-36 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8504/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C8504/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8504/WP-36 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 10 | ||
| PE3C8504-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 48 inches. Outdoor Rated 7/16 DIN Male Right Angle to N Male Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3C8504-48, can also be known as a low PIM right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8504-48 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8504-48 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts. |
| 10 | ||
| PE3C8504-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Outdoor Rated 7/16 DIN Male Right Angle to N Male Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3C8504-24, can also be known as a low PIM right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C8504-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8504-24 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male right angle to N male cable using SPO-250 coax using Times Microwave parts. |
| 10 | ||
| PE3C8501-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 12 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-12, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 100 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-100CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-100CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 150 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501-150CM, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501-150CM can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts. |
| 0 | ||
| PE3C8501 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 0 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C8501, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8501 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8501 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable using SPO-250 coax using Times Microwave parts. | 0 | |||
 Vyrian | VSC8504XKS-04 | Microchip Technology Inc | Ethernet Transceiver, 4-Trnsvr, PBGA256 RoHS : Compliant | 12,285 | ||
| BC850BWT/R | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 11,674 | |||
| HMC8500PM5ETR | Analog Devices Inc | Wide Band High Power Amplifier, 10MHz Min, 2800MHz Max, 1 Func, GAN RoHS : Compliant | 11,371 | |||
DAC8501E/250G4 | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 10us Settling Time, PDSO8 RoHS : Compliant | 9,810 | |||
| BC850C/A2 | Nexperia | 9,725 | ||||
| BC850B/T3 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 9,520 | |||
| BC850C-QVL | Nexperia | RoHS : Compliant | 8,952 | |||
| MPC850DECVR66BU | NXP Semiconductors | RISC Microprocessor, 32-Bit, 66MHz, CMOS, PBGA256 RoHS : Compliant | 8,258 | |||
| VSC8504XKS-02 | Microchip Technology Inc | Ethernet Transceiver, 4-Trnsvr, PBGA256 RoHS : Compliant | 7,961 | |||
| MPC850SRVR80BU | NXP Semiconductors | RISC Microprocessor, 32-Bit, 80MHz, CMOS, PBGA256 RoHS : Compliant | 7,024 | |||
| HMC8500PM5E | Analog Devices Inc | Wide Band High Power Amplifier, 10MHz Min, 2800MHz Max, 1 Func, GAN RoHS : Compliant | 5,517 | |||
| HMC8500LP5DETR | Analog Devices Inc | Wide Band High Power Amplifier | 5,280 | |||
| BC850B/T4 | Nexperia | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-236AB RoHS : Compliant | 4,108 | |||
| MPC850VR50BU | NXP Semiconductors | RISC Microprocessor, 32-Bit, 50MHz, CMOS, PBGA256 RoHS : Compliant | 2,525 | |||
| BC850BE6327HTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 0.1A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 200 | |||
 Win Source Electronics | BC850C | Diotec Semiconductor AG | NPN general purpose transistors RoHS : Compliant |
| 394,000 | |
| BC850CLT1 | onsemi | TRANS NPN 45V 0.1A SOT23 RoHS : Not Compliant |
| 358,110 | ||
| BC850CLT1G | onsemi | TRANS NPN 45V 0.1A SOT23 RoHS : Compliant |
| 267,000 | ||
| BC850B | Diotec Electronics Corp | TRANS NPN 45V 0.1A SOT23-3 |
| 162,000 | ||
| BC850CW | Taiwan Semiconductor | SOT-323, 50V, 0.1A, NPN BIPOLAR / Bipolar (BJT) Transistor NPN 45 V 100 mA 100MHz 200 mW Surface Mount SOT-323 |
| 61,000 | ||
| VSC8502XML-03 | Microchip Technology Inc | IC TELECOM INTERFACE 135QFN / Telecom IC Ethernet 135-QFN (12x12) RoHS : Compliant |
| 5,472 | ||
| VSC8502XML | Microchip Technology Inc | IC TELECOM INTERFACE 135QFN RoHS : Compliant |
| 4,900 | ||
| VSC8504XKS-05 | Microchip Technology Inc | IC TELECOM INTERFACE 256BGA / Telecom IC Ethernet 256-PBGA (17x17) RoHS : Compliant |
| 990 | ||
| MPC850DSLVR50BU | Freescale Semiconductor | IC MPU MPC8XX 50MHZ 256BGA RoHS : Compliant |
| 153 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand