| Os motores de busca de Datasheet de Componentes eletrônicos |
|
C566C-RFS-CT0 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Avnet Americas | SPC5668GF1AMMG | NXP Semiconductors | - Trays (Alt: SPC5668GF1AMMG) RoHS : Compliant |
| 5,642 | |
| C566C-AFF-CU0W0252 | Cree, Inc. | - Ammo Pack (Alt: C566C-AFF-CU0W0252) RoHS : Not Compliant |
| 2,500 | ||
| CY8C5666LTI-LP005 | Infineon Technologies AG | MPU PSoC RISC 32-Bit 67MHz 1.8V/3.3V/5V 68-Pin QFN Tray - Trays (Alt: CY8C5666LTI-LP005) RoHS : Compliant |
| 2,210 | ||
| C566C-RFE-CV0W0BB2 | Cree, Inc. | - Ammo Pack (Alt: C566C-RFE-CV0W0BB2) RoHS : Not Compliant |
| 0 | ||
| C566E-BFF-CU34Q4S2 | Cree, Inc. | - Ammo Pack (Alt: C566E-BFF-CU34Q4S2) RoHS : Compliant |
| 0 | ||
| C566D-GFE-CY14Q8S1 | Cree, Inc. | - Bag (Alt: C566D-GFE-CY14Q8S1) RoHS : Not Compliant |
| 0 | ||
| C566D-RFE-CV0X0BB2 | Cree, Inc. | - Ammo Pack (Alt: C566D-RFE-CV0X0BB2) RoHS : Not Compliant |
| 0 | ||
| C566D-RFE-CV34QBB2 | Cree, Inc. | - Ammo Pack (Alt: C566D-RFE-CV34QBB2) RoHS : Not Compliant |
| 0 | ||
| C566E-AFE-CV34Q341 | Cree, Inc. | - Bag (Alt: C566E-AFE-CV34Q341) RoHS : Compliant |
| 0 | ||
| C566E-GFE-CY0Z0791 | Cree, Inc. | - Bag (Alt: C566E-GFE-CY0Z0791) RoHS : Compliant |
| 0 | ||
| C566D-RFF-CV0X0BB1 | Cree, Inc. | - Bag (Alt: C566D-RFF-CV0X0BB1) RoHS : Not Compliant |
| 0 | ||
| C566D-RFF-CV34QBB1 | Cree, Inc. | - Bag (Alt: C566D-RFF-CV34QBB1) RoHS : Not Compliant |
| 0 | ||
| C566E-AFF-CV14Q342 | Cree, Inc. | - Ammo Pack (Alt: C566E-AFF-CV14Q342) RoHS : Compliant |
| 0 | ||
| CY8C5668AXI-LP034 | Infineon Technologies AG | MPU PSoC RISC 32-Bit 67MHz 1.8V/3.3V/5V 100-Pin TQFP Tray - Trays (Alt: CY8C5668AXI-LP034) RoHS : Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | Power MOSFET, N Channel, 60 V, 4.3 A, 0.038 ohm, SuperSOT, Surface Mount - Tape and Reel (Alt: FDC5661N-F085) RoHS : Compliant | 0 | |||
![]() Newark | C566D-BFE-CU0W0351 | Cree, Inc. | Full Rank, Bulk Pack, Iron Lead Frame Rohs Compliant: Yes |Cree Led C566D-BFE-CU0W0351 RoHS : Compliant |
| 175 | |
| 2SC5662T2LP | ROHM Semiconductor | Trans, Bjt, Single, Npn, 11V, 3.2 Ghz; Available Until Stocks Are Exhausted |Rohm 2SC5662T2LP RoHS : Compliant |
| 53 | ||
| 2SC5662T2LP | ROHM Semiconductor | Trans, Bjt, Single, Npn, 11V, 3.2 Ghz; Available Until Stocks Are Exhausted |Rohm 2SC5662T2LP RoHS : Compliant |
| 53 | ||
| CY8C5668AXI-LP034 | Infineon Technologies AG | Mcu, Psoc 5Lp, 67Mhz, Tqfp-100; |Infineon Technologies CY8C5668AXI-LP034 RoHS : Compliant |
| 26 | ||
| DC566A-A | Analog Devices Inc | Demo Brd, Digitally Ctrl Prog Gain Amp; |Analog Devices, Inc. DC566A-A RoHS : Compliant |
| 4 | ||
| FSC3-CC56644 | ROHDE&SCHWARZ | Calibration Coverage 5 Years From Delive; |Rohde & Schwarz FSC3-CC56644 RoHS : Not Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | Nmos Ssot6 60V 47 Mohm; |Onsemi FDC5661N-F085 RoHS : Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | Mosfet, N-Ch, 60V, 4.3A, 150Deg C, 1.6W; |Onsemi FDC5661N-F085 RoHS : Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | Mosfet, N-Ch, 60V, 4.3A, 150Deg C, 1.6W; |Onsemi FDC5661N-F085 RoHS : Compliant |
| 0 | ||
T212C566K015SS![]() | KEMET Corporation | Capacitor,56Uf,15Vdc,10-% Tol,10+% Tol |Kemet T212C566K015SS RoHS : Not Compliant |
| 0 | ||
| T262C566K015PS | KEMET Corporation | Capacitor,56Uf,15Vdc,10-% Tol,10+% Tol |Kemet T262C566K015PS RoHS : Not Compliant |
| 0 | ||
| C566C-RFE-CV0W0BB2 | Cree, Inc. | 2130-4180Mcd, Ammo Pack, Iron Lead Frame; |Cree Led C566C-RFE-CV0W0BB2 RoHS : Compliant |
| 0 | ||
| C566D-GFE-CY14Q8S1 | Cree, Inc. | Any 4 Consecutive Sub-Bins From Y1 (5860; |Cree Led C566D-GFE-CY14Q8S1 RoHS : Compliant |
| 0 | ||
| C566D-RFE-CV34QBB2 | Cree, Inc. | Any 4 Consecutive Bins From V3 (2564Mcd); |Cree Led C566D-RFE-CV34QBB2 RoHS : Compliant |
| 0 | ||
| C566D-RFF-CV34QBB1 | Cree, Inc. | Any 4 Consecutive Bins From V3 (2564Mcd); |Cree Led C566D-RFF-CV34QBB1 RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | DC566A-B | Analog Devices Inc | LTC6910-2CTS8 - Digitally Cont |
| 49 | |
| DC566A-C | Analog Devices Inc | LTC6910-3CTS8 - Digitally Cont |
| 44 | ||
| 122782-HMC566LP4E | Analog Devices Inc | HMC566LP4E Evaluation PCB |
| 16 | ||
| DC566A-A | Analog Devices Inc | LTC6910-1CTS8 - Digitally Cont |
| 8 | ||
![]() NXP Semiconductors | MPC5668GKITJ | NXP Semiconductors | Evaluation Kit for Qorivva MPC5668G/E, Ethernet, CAN, SCI, Media Local Bus, RoHS : Not Compliant |
| 0 | |
SPC5668EK0MMG![]() | NXP Semiconductors | NXP 32-bit MCU, Power Arch, 2MB Flash, 116MHz, -40/+125degC, Automotive Grade, MAPBGA 208, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
SPC5668GK0MMG![]() | NXP Semiconductors | NXP 32-bit MCU, Power Arch, 2MB Flash, 116MHz, -40/+125degC, Automotive Grade, MAPBGA 208, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
SPC5668GK0VMG![]() | NXP Semiconductors | NXP 32-bit MCU, Power Arch, 2MB Flash, 116MHz, -10/+105degC, Automotive Grade, MAPBGA 208, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 0 | ||
![]() RS | C566 | Martin Sprocket & Gear Inc | 14.5- PA SPUR GEAR, 5 DP, 66 TEETH, 13.2" PD, 1.1875" ID, CAST IRON |
| 0 | |
| PC5666 | Siemens | BRKR ND 3P PLUG-IN MNT ASSBY LN-LD VER ; PC5666 |
| 0 | ||
| PC5662 | Siemens | BREAKER MD 2P PLUG-IN MOUNT ASSBY LN-LD ; PC5662 |
| 0 | ||
| PC5667 | Siemens | BRKR ND 3P PLUG-IN MNT ASSBY LN-LD HOR ; PC5667 |
| 0 | ||
| DMC566030R | Panasonic Electronic Components | TRANSISTOR 2XNPN 50V 47K 47K SMINI6-F3-B RoHS : Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | TRANSISTOR, MOSFET, N-CHANNEL, LOGIC LEVEL, 60V, 4A, 60MOHM, UIS CAPABILITY RoHS : Compliant |
| 0 | ||
| 219-2-1REC5-66-5-8-40-H | Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, 2 POLE, 209 SERIES |
| 0 | ||
| 219-2-1REC5-66-7-8M-40-AH | Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, 2 POLE, 209 SERIES |
| 0 | ||
| 219-2-1REC5-66-7-9M-70-AH | Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, 2 POLE, 209 SERIES |
| 0 | ||
| CPV10-VI-P8-1/8-C (566712) | Festo | MULTI-PIN, FOR CPV10 VALVE MFLD, 8 STATIONS, 1/8 |
| 0 | ||
| CPV10-VI-P4-1/8-C (566710) | Festo | MULTI-PIN, FOR CPV10 VALVE MFLD, 4 STATIONS, 1/8" |
| 0 | ||
| CPV10-VI-P6-1/8-C (566711) | Festo | MULTI-PIN, FOR CPV10 VALVE MFLD, 6 STATIONS, 1/8 |
| 0 | ||
| 219-3-1REC5-66-7-8M-30-AH-V | Sensata Technologies | HYDRAULIC MAGNETIC CIRCUIT BREAKER, 3 POLE, 209 SERIES |
| 0 | ||
| TIGC56-6S-BL-NBL (TGG-51946752|TIGC56-6S-BL-NBL|TIGC566SBLNBL) | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| LTILC56-6S-BL-RC-NBL/12V (RLL-49226946|LTILC56-6S-BL-RC-NBL/12V|LTILC566SBLRCNBL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Microchip Technology Inc | 2C5664 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 RoHS : Unknown |
| 477 | |
| 2C5666 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 106 | ||
| 2C5665 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| 2C5667 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| 2C5662 | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
| 2C5666-MSCL | Microchip Technology Inc | Power BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
![]() Rochester Electronics | SPC5668GF1AMMG | NXP Semiconductors | IC MCU e200z650, e200z0 32Bit 2 Core FLASH 2MB (2M x 8) 116MHz 208-BGA Tray RoHS : Compliant |
| 12,329 | |
SPC5668EK0MMG![]() | NXP Semiconductors | IC MCU e200z650, e200z0 32Bit 2 Core FLASH 2MB (2M x 8) 116MHz 208-BGA Tray RoHS : Compliant |
| 768 | ||
2SC5669![]() | onsemi | Power Bipolar Transistor, 15A I(C), 230V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin RoHS : Compliant |
| 133 | ||
| CY8C5668AXI-LP034 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 372 | ||
| CY8C5666AXI-LP004 | Infineon Technologies AG | Standard 18Mbit 512k x 36 3.135V - 3.6V Parallel 167MHz 3.4ns 100-QFP Tray RoHS : Compliant |
| 104 | ||
| CY8C5667LTI-LP041 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 68-QFN Tray RoHS : Compliant |
| 5,055 | ||
| CY8C5667AXQ-LP040 | Infineon Technologies AG | Multifunction Peripheral, CMOS, PQFP100 RoHS : Compliant |
| 158 | ||
DAC5662MPFBEP![]() | Texas Instruments | IC DAC 2 CONV 12Bits Current Source Parallel 48-QFP Tray RoHS : Compliant |
| 916 | ||
DAC5662IPFB![]() | Texas Instruments | IC DAC 2 CONV 12Bits Current Source Parallel 48-QFP Tray RoHS : Compliant |
| 9,946 | ||
| CY8C5667AXQ-LP040 | Cypress Semiconductor | Multifunction Peripheral, CMOS, PQFP100 RoHS : Compliant |
| 50 | ||
CY8C5668AXI-LP013![]() | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 70 | ||
CY8C5668AXI-LP034![]() | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 20 | ||
CLC5665IM![]() | National Semiconductor Corporation | Operational Amplifier, 1 Func, 10000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 17 | ||
CLC5665IN![]() | National Semiconductor Corporation | Video Amplifier RoHS : Not Compliant |
| 2,112 | ||
2SC5669![]() | SANYO Semiconductor Co Ltd | Power Bipolar Transistor, 15A I(C), 230V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin RoHS : Compliant |
| 1 | ||
![]() Sager | AAC5662-00 | TE Connectivity | TE Connectivity 100P2314-15-L35-CHP | 0 | ||
| 219-3-1REC5-66-5-9-70-AH-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-5-9-90 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-7-8-13.5-A | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-8-1-30 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-7-8-31.5 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-8-1-50 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-2-1REC5-66-5-8-40-H | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 219-2-1REC5-66-7-8M-40-AH | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 219-2-1REC5-66-7-9M-70-AH | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 219-3-1REC5-66-8-1-15 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-8-1-60 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-7-8M-30-AH-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr, HydMag, 2 pl, 480VAC, 1A |
| 0 | ||
| 219-2-1REC5-66-8-8-30 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 219-3-1REC5-66-7-2-30 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() TME | CY8C5667LTI-LP041 | Infineon Technologies AG | IC: ARM microcontroller; 67MHz; Features: DMA,PoR,PWM; ARM RoHS : Compliant |
| 8,800 | |
| SPC5668GF1AMMG | NXP Semiconductors | 116MHz; Features: DMA,PoR,PWM; -40÷125°C; Core: 32-bit RoHS : Compliant |
| 3,150 | ||
SPC5668GK0MMG![]() | NXP Semiconductors | 116MHz; Features: DMA,PoR,PWM; -40÷125°C; Core: 32-bit RoHS : Compliant |
| 1,580 | ||
| C566C-RFF-CV0W0BB2 | Cree, Inc. | LED; red; oval; 5.2x4.6x7.8mm; 2130÷4180mcd; 70/35°; Front: convex RoHS : Compliant |
| 508 | ||
| C566C-RFE-CV0W0BB2 | Cree, Inc. | LED; red; oval; 5.2x4.6mm; 2130÷4180mcd; Front: convex; 20mA; 35÷70° RoHS : Compliant |
| 0 | ||
| FDC5661N-F085 | onsemi | Transistor: N-MOSFET; unipolar; 60V; 4.3A; Idm: 20A; 1.6W; TSOT23-6 RoHS : Compliant |
| 0 | ||
| C566C-AFF-CU0W0252 | Cree, Inc. | LED; amber; 5mm; 1520÷4180mcd; Front: convex; 2.1÷2.6VDC; 130mW RoHS : Compliant |
| 0 | ||
| C566C-RFF-CU0W0BB1 | Cree, Inc. | LED; red; oval; 5.2x4.6mm; 20mA; -40÷95°C; 2.1V; 130mW RoHS : Compliant |
| 0 | ||
| C566D-GFF-CY0Z0791 | Cree, Inc. | LED; green; oval; 5.2x4.6mm; 5860÷12000mcd; Front: convex; 20mA RoHS : Compliant |
| 0 | ||
| 2SC5661T2LP | ROHM Semiconductor | Transistor: NPN; bipolar; 20V; 50mA; 150mW; SOT723 RoHS : Compliant |
| 0 | ||
| C566D-GFE-CY14Q7S2 | Cree, Inc. | LED; green; oval; 5.2x4.6mm; Front: convex; 20mA; No.of term: 2 RoHS : Compliant |
| 0 | ||
| C566E-RFE-CV0X0BB2 | Cree, Inc. | LED; red; oval; 5.2x8.7x4.5mm; 2130÷5860mcd; Front: convex; 50mA |
| 0 | ||
| C566D-AFE-CV0X0251 | Cree, Inc. | LED; amber; oval; 5.2x4.6x7.8mm; 2130÷5860mcd; Front: convex; 20mA RoHS : Compliant |
| 0 | ||
| 2SC5663T2L | ROHM Semiconductor | Transistor: NPN; bipolar; 12V; 0.5A; 150mW; SOT723 RoHS : Compliant |
| 0 | ||
| CY8C5667AXQ-LP040 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | 2SC5662T2LP | ROHM Semiconductor | RoHS : Compliant |
| 350 | |
| MPC566MZP56 | NXP Semiconductors | 32bit MCU,Pwr Arch core, 1MB Flash, 56MHz, -40/+125degC,PBGA 388 RoHS : Not Compliant | 130 | |||
| 2SC5663T2L | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
![]() ComSIT USA | SPC5668EK0VMG![]() | NXP Semiconductors | AVAILABLE EU RoHS : Compliant | 675 | ||
![]() ComSIT USA | SPC5668EK0VMG![]() | NXP Semiconductors | Microcontroller RoHS : Compliant | 900 | ||
![]() NexGen Digital | FDC5661N-F085 | onsemi | RoHS : Compliant | 9,000 | ||
| C566C-GFN-CX0Y0782 | Cree, Inc. | RoHS : Unknown | 90 | |||
![]() Chip 1 Exchange | 2SC5663 | ROHM Semiconductor | INSTOCK | 8,000 | ||
| 2SC5663T2L | ROHM Semiconductor | INSTOCK RoHS : Compliant | 4,920 | |||
| CY8C5666AXI-LP001 | Infineon Technologies AG | INSTOCK RoHS : Compliant | 285 | |||
| S-C566 | INSTOCK | 38 | ||||
| C566TOR | INSTOCK | 37 | ||||
DAC5662MPFBREP![]() | Texas Instruments | INSTOCK RoHS : Compliant | 10 | |||
| HMC566 | Analog Devices Inc | INSTOCK RoHS : Compliant | 4 | |||
![]() Avnet Abacus | EC5661-000 | TE Connectivity | (Alt: EC5661-000) RoHS : Compliant | 0 | ||
| EC5665-000 | TE Connectivity | (Alt: EC5665-000) RoHS : Compliant | 0 | |||
| EC5663-000 | TE Connectivity | (Alt: EC5663-000) RoHS : Compliant | 0 | |||
| EC5668-000 | TE Connectivity | (Alt: EC5668-000) RoHS : Compliant | 0 | |||
| EC5660-000 | TE Connectivity | (Alt: EC5660-000) RoHS : Compliant | 0 | |||
| EC5662-000 | TE Connectivity | (Alt: EC5662-000) RoHS : Compliant | 0 | |||
| EC5664-000 | TE Connectivity | (Alt: EC5664-000) RoHS : Compliant | 0 | |||
| EC5667-000 | TE Connectivity | (Alt: EC5667-000) RoHS : Compliant | 0 | |||
| EC5669-000 | TE Connectivity | (Alt: EC5669-000) RoHS : Compliant | 0 | |||
| EC5666-000 | TE Connectivity | (Alt: EC5666-000) RoHS : Compliant | 0 | |||
T110C566K015AT![]() | KEMET Corporation | (Alt: T110C566K015AT) RoHS : Compliant | 0 | |||
T110C566M015AT![]() | KEMET Corporation | (Alt: T110C566M015AT) RoHS : Compliant | 0 | |||
T110C566J015AT![]() | KEMET Corporation | Tantalum Capacitor 56 uF 15 V 5 Axial Leaded 734 mm 1742 mm (Alt: T110C566J015AT) RoHS : Compliant | 0 | |||
![]() Avnet Asia | FDC5661N-F085 | onsemi | Power MOSFET, N Channel, 60 V, 4.3 A, 0.038 ohm, SuperSOT, Surface Mount (Alt: FDC5661N-F085) RoHS : Compliant | 0 | ||
| 2SC5663T2L | ROHM Semiconductor | Trans GP BJT NPN 12V 0.5A 3-Pin VMT T/R (Alt: 2SC5663T2L) RoHS : Compliant | 0 | |||
| 2SC5662T2LP | ROHM Semiconductor | Trans GP BJT NPN 11V 0.05A 3-Pin VMT T/R (Alt: 2SC5662T2LP) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 2SC5661T2LP | ROHM Semiconductor | Trans GP BJT NPN 20V 005A 3Pin VMT TR (Alt: 2SC5661T2LP) RoHS : Compliant | 0 | ||
| FDC5661N-F085 | onsemi | Power MOSFET N Channel 60 V 43 A 0038 ohm SuperSOT Surface Mount (Alt: FDC5661N-F085) RoHS : Compliant | 0 | |||
SPC5668GK0VMGR![]() | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA TR (Alt: SPC5668GK0VMGR) RoHS : Compliant | 0 | |||
| SPC5668GF1AVMG | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA Tray (Alt: SPC5668GF1AVMG) RoHS : Compliant | 0 | |||
| C566C-RFE-CV0W0BB2 | Cree, Inc. | 21304180MCD AMMO PACK IRON LEAD FRAME (Alt: C566C-RFE-CV0W0BB2) RoHS : Compliant | 0 | |||
| C566C-AFF-CU0W0252 | Cree, Inc. | LED Amber Through Hole T1 34 5mm 20 mA 21 V 591 nm (Alt: C566C-AFF-CU0W0252) RoHS : Compliant | 0 | |||
| C566C-RFF-CU0W0BB1 | Cree, Inc. | FULL RANK BULK PACK IRON LEAD FRAME (Alt: C566C-RFF-CU0W0BB1) RoHS : Compliant | 0 | |||
| C566D-GFF-CY14Q7S2 | Cree, Inc. | ANY 4 CONSECUTIVE SUBBINS FROM Y1 5860MCD Z2 10100MCD ANY 1 HUE FROM G7 520NM TO G8 530NM (Alt: C566D-GFF-CY14Q7S2) RoHS : Compliant | 0 | |||
| C566D-GFF-CY34Q7S1 | Cree, Inc. | LED Single Color Green 12000mcd 530nm 35mA 2Pin Through Hole Bulk (Alt: C566D-GFF-CY34Q7S1) RoHS : Compliant | 0 | |||
| C566D-AFF-CV34Q342 | Cree, Inc. | ANY 4 CONSECUTIVE BINS FROM V3 2564MCD W4 4180MCD HUE A3 AND A4 AMMO PACK IRON LEAD FRAME (Alt: C566D-AFF-CV34Q342) RoHS : Compliant | 0 | |||
| C566D-GFF-CY0Z0791 | Cree, Inc. | LED Single Color Green 12000mcd 535nm 35mA 2Pin Through Hole Bulk (Alt: C566D-GFF-CY0Z0791) RoHS : Compliant | 0 | |||
| C566D-GFE-CY14Q7S2 | Cree, Inc. | ANY 4 CONSECUTIVE SUBBINS FROM Y1 5860MCD Z2 10100MCD ANY 1 HUE FROM G7 520NM TO G8 530NM (Alt: C566D-GFE-CY14Q7S2) RoHS : Compliant | 0 | |||
| C566C-AFF-CV0W0342 | Cree, Inc. | 21304180MCD HUE A3 AND A4 AMMO PACK IRON LEAD FRAME (Alt: C566C-AFF-CV0W0342) RoHS : Compliant | 0 | |||
| C566E-RFE-CV0X0BB2 | Cree, Inc. | (Alt: C566E-RFE-CV0X0BB2) RoHS : Compliant | 0 | |||
| C566D-GFF-CY14Q8S1 | Cree, Inc. | ANY 4 CONSECUTIVE SUBBINS FROM Y1 5860MCD Z2 10100MCD ANY 1 HUE FROM G8 525NM TO G9 535NM (Alt: C566D-GFF-CY14Q8S1) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | CY8C5667LTI-LP041 | Infineon Technologies AG | PSoC 5LP RISC 32Bit 67MHz 18V25V33V5V 68Pin QFN Tray (Alt: SP005655411) RoHS : Compliant | 7,800 | ||
SPC5668GK0MMG![]() | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC56xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5668GK0MMG) RoHS : Compliant | 6,750 | |||
| SPC5668EAMMG | NXP Semiconductors | MCU 32Bit MPC5668x e200z650 RISC 2MB 208Pin MAPBGA Tray (Alt: SPC5668EAMMG) RoHS : Compliant | 4,140 | |||
| SPC5668GF1AMMG | NXP Semiconductors | 32 Bit Microcontroller MPC5 Family MPC56xx Series Microcontrollers Power Architecture 32 bit (Alt: SPC5668GF1AMMG) RoHS : Compliant | 1,350 | |||
| PPC5668GAVMJ | NXP Semiconductors | HighEnd MCU (Alt: PPC5668GAVMJ) RoHS : Compliant | 0 | |||
| FDC5661N-F085 | onsemi | Power MOSFET N Channel 60 V 43 A 0038 ohm SuperSOT Surface Mount (Alt: FDC5661N-F085) RoHS : Compliant | 0 | |||
| PPC5668GF1AVMJ | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 256Pin MAPBGA Tray (Alt: PPC5668GF1AVMJ) RoHS : Compliant | 0 | |||
SPC5668GK0VMGR![]() | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA TR (Alt: SPC5668GK0VMGR) RoHS : Compliant | 0 | |||
| SPC5668GF1AVMG | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA Tray (Alt: SPC5668GF1AVMG) RoHS : Compliant | 0 | |||
SPC5668GK0MMGR![]() | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA TR (Alt: SPC5668GK0MMGR) RoHS : Compliant | 0 | |||
| PPC5668GF0AVMG | NXP Semiconductors | MCU 32bit MPC56xx e200 RISC 2048KB Flash 33V5V 208Pin MAPBGA Tray (Alt: PPC5668GF0AVMG) RoHS : Compliant | 0 | |||
| SPC5668EF1AMMG | NXP Semiconductors | MCU 32Bit MPC5668x e200z650 RISC 2MB 208Pin MAPBGA Tray (Alt: SPC5668EF1AMMG) RoHS : Compliant | 0 | |||
| SPC5668EK0MMGR | NXP Semiconductors | BGA208 A32bit MCU Power Arch 2MB Flash 116MHz 12NC 935310896518 (Alt: SPC5668EK0MMGR) RoHS : Compliant | 0 | |||
| SPC5668GF1AMMGR | NXP Semiconductors | 32bit MCU Power Arch Cores 2MB Flash 116MHz Automotive Grade 208Ball BGA TR (Alt: SPC5668GF1AMMGR) RoHS : Compliant | 0 | |||
| CY8C5668AXI-LP034 | Infineon Technologies AG | (Alt: SP005655417) RoHS : Compliant | 0 | |||
![]() Flip Electronics | SPC5668GF1AMMG | NXP Semiconductors | Stock RoHS : Compliant | 15,000 | ||
| 2SC5664-E1-AZ | Renesas Electronics Corporation | Stock | 2,500 | |||
| SPC5668GF1AVMG | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,200 | ||
| SPC5668GF1AVMGR | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,000 | ||
| MPC566AZP56 | NXP Semiconductors | Stock RoHS : Not Compliant | 600 | |||
SPC5668EK0MMG![]() | NXP Semiconductors | Stock RoHS : Compliant | 450 | |||
| SPC5668GAVMG | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 350 | ||
| SPC5668GAVMGR | NXP Semiconductors | Stock RoHS : Compliant | 350 | |||
| CY8C5668AXI-LP013 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 69 | ||
| CY8C5666AXI-LP004 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 44 | ||
| MPC5668GKITJ | NXP Semiconductors | Stock | 10 | |||
![]() Master Electronics | FDC5661N-F085 | onsemi | N-Channel PowerTrench® MOSFET Logic Level 60V 4A 60mΩ RoHS : Compliant |
| 5,650 | |
| 21931REC5667818.2AHV | Sensata Circuit Breakers | CIR BRKR HYD MAG RoHS : Compliant |
| 5 | ||
| 21931REC56678M30AHV | Sensata Circuit Breakers | CIR BRKR HYD MAG RoHS : Compliant |
| 0 | ||
| EC5665-000 | TE Connectivity | 11551910-PREV RoHS : Compliant |
| 0 | ||
| 2C5665 | Microchip Technology Inc | Power BJT RoHS : Compliant |
| 0 | ||
| 2C5667 | Microchip Technology Inc | Power BJT RoHS : Compliant |
| 0 | ||
| 2C5664 | Microchip Technology Inc | Power BJT RoHS : Compliant |
| 0 | ||
| 219-2-1REC5-66-5-8-40-H | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 2 Pole 209 Series | Sensata - Airpax 219-2-1REC5-66-5-8-40-H RoHS : Compliant |
| 0 | ||
| 219-2-1REC5-66-7-8M-40-AH | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 219-2-1REC5-66-7-9M-70-AH | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 219-3-1REC5-66-8-1-60 | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3Pole 60A 480VAC RoHS : Compliant |
| 0 | ||
| 2C5662 | Microchip Technology Inc | Power BJT RoHS : Compliant |
| 0 | ||
| 219-2-1REC5-66-8-9-70 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 2 Pole 209 Series | Sensata - Airpax 219-2-1REC5-66-8-9-70 RoHS : Compliant |
| 0 | ||
| 219-3-1REC5-66-7-8-18-AH-V | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 3 Pole 209 Series | Sensata - Airpax 219-3-1REC5-66-7-8-18-AH-V RoHS : Compliant |
| 0 | ||
| 219-3-1REC5-66-7-8-18-AH | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker 3 Pole 209 Series | Sensata - Airpax 219-3-1REC5-66-7-8-18-AH RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C5662 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male Right Angle to Reverse Polarity SMA Male Right Angle Cable Using RG58 Coax., Radio frequency assembly N male right angle to reverse polarity SMA male right angle cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to reverse polarity SMA male right angle cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our right angle type N to right angle reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to reverse polarity SMA cable is a male to male coax assembly, PE3C5662, can also be known as a right angle type N plug to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity SMA plug cable assembly PE3C5662 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N right angle male to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5662 can also be used in the other direction and will be right angle reverse polarity SMA male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to reverse polarity SMA male right angle cable using RG58 coax. | 0 | ||
| PE3C5666 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Female to FME Plug Cable Using RG58 Coax., Radio frequency assembly BNC female to FME plug cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to FME plug cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and FME cable connection on the other. Our BNC to FME cable assemblies have a female gender on end 1 and plug on end 2. This BNC to FME cable is a female to plug coax assembly, PE3C5666, can also be known as a BNC jack to FME male cable assembly and will be shipped same-day as it is purchased. BNC jack to FME male cable assembly PE3C5666 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC female to FME plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5666 can also be used in the other direction and will be FME plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to FME male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to FME cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to FME plug cable using RG58 coax. | 0 | |||
| PE3C5667 | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. NMO Mount to QMA Male Cable Using RG58 Coax. PE3C5667 is a NMO Mount sexless to QMA male cable using RG58 coax. This Pasternack NMO Mount sexless to QMA male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm QMA for connector 2. Our sexless NMO Mount to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5667 NMO Mount sexless to QMA male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C5661 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG141 Coax., Radio frequency assembly SMA male to SMA male right angle cable using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5661, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5661 is built with RG141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5661 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable using RG141 coax. | 0 | |||
| PE3C5663 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMA male right angle cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5663, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5663 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5663 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable using PE-SR405FL coax. | 0 | |||
| PE3C5660 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 3.5mm Female to Straight Cut Lead Cable Using PE-SR405AL Coax., Radio frequency assembly 3.5mm female to straight cut lead cable using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm female to straight cut lead cable using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and straight cut lead cable connection on the other. Our 3.5mm to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This 3.5mm to straight cut lead cable is a female to sexless coax assembly, PE3C5660, can also be known as a 3.5mm jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 3.5mm jack to straight cut lead sexless cable assembly PE3C5660 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 3.5mm cable assembly is manufactured with 3.5mm to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5660 can also be used in the other direction and will be straight cut lead sexless to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to straight cut lead cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm female to straight cut lead cable using PE-SR405AL coax. | 0 | |||
| PE3C5668 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. N Male to Trimmed Lead Cable Using 1/2 inch Superflexible Coax., Radio frequency assembly N male to trimmed lead cable using 1/2 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to trimmed lead cable using 1/2 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and trimmed lead cable connection on the other. Our type N to trimmed lead cable assemblies have a male gender on end 1 and sexless on end 2. This type N to trimmed lead cable is a male to sexless coax assembly, PE3C5668, can also be known as a type N plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. N type plug to trimmed lead sexless cable assembly PE3C5668 is built with 1/2" superflexible which is a corrugated coax type. The Pasternack corrugated N cable assembly is manufactured with N type to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5668 can also be used in the other direction and will be trimmed lead sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to trimmed lead cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to trimmed lead cable using 1/2 inch superflexible coax. | 0 | |||
| PE3C5669 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female to MCX Plug Cable Using RG316 Coax., Radio frequency assembly BNC female to MCX plug cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to MCX plug cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and MCX cable connection on the other. Our BNC to MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3C5669, can also be known as a BNC jack to MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3C5669 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC female to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5669 can also be used in the other direction and will be MCX plug to BNC female cable assembly if the opposite connectivity is required. BNC jack to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to MCX plug cable using RG316 coax. | 0 | |||
| PE3C5667/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Hermaphroditic, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. NMO Mount to QMA Male Cable Using RG58 Coax with HeatShrink., Radio frequency assembly NMO mount to QMA male cable using RG58 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NMO mount to QMA male cable using RG58 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NMO mount to QMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with NMO mount cable connection on one end and QMA cable connection on the other. Our NMO mount to QMA cable assemblies have a sexless gender on end 1 and male on end 2. This NMO mount to QMA cable is a sexless to male coax assembly, PE3C5667/HS, can also be known as a NMO mount sexless to QMA plug cable assembly and will be shipped same-day as it is purchased. NMO mount sexless to QMA plug cable assembly PE3C5667/HS is built with RG58 which is a flexible coax type. The Pasternack flexible NMO Mount cable assembly is manufactured with NMO mount to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this NMO mount sexless to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5667/HS can also be used in the other direction and will be QMA male to NMO mount sexless cable assembly if the opposite connectivity is required. NMO mount sexless to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NMO mount to QMA cable assembly for quick shipment worldwide. Variations of NMO mount cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NMO mount to QMA male cable using RG58 coax with heatshrink. | 0 | |||
| PE3C5665 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B400, RF Cable Type: PE-B400, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-B400 Coax., Radio frequency assembly SMA male to SMA male cable using PE-B400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable using PE-B400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5665, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5665 is built with PE-B400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable using PE-B400 coax. | 0 | |||
![]() Vyrian | CY8C5666AXQ-LP004 | Cypress Semiconductor | Multifunction Peripheral, CMOS, PQFP100 RoHS : Compliant | 18,224 | ||
| 122782-HMC566LP4E | Analog Devices Inc | 11,304 | ||||
| DC566A-B | Analog Devices Inc | 10,426 | ||||
| SPC5668EK0MMGR | NXP Semiconductors | Microcontroller RoHS : Compliant | 9,038 | |||
DAC5662AIPFBR![]() | Texas Instruments | D/A Converter, 2 Func, Parallel, Word Input Loading, 0.02us Settling Time, PQFP48 RoHS : Compliant | 8,737 | |||
| DC566A-A | Analog Devices Inc | 7,766 | ||||
SPC5668GK0MMGR![]() | NXP Semiconductors | Microcontroller RoHS : Compliant | 7,523 | |||
2SC5669![]() | onsemi | Power Bipolar Transistor, 15A I(C), 230V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin RoHS : Compliant | 7,512 | |||
DAC5662MPFBREP![]() | Texas Instruments | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.02us Settling Time, PQFP48 RoHS : Compliant | 7,349 | |||
| DC566A-C | Analog Devices Inc | 5,118 | ||||
DAC5662AIPFBRG4![]() | Texas Instruments | D/A Converter, 2 Func, Parallel, Word Input Loading, 0.02us Settling Time, PQFP48 RoHS : Compliant | 4,876 | |||
UC5661J![]() | Texas Instruments | Support Circuit, CDIP8 RoHS : Not Compliant | 4,696 | |||
SPC5668GK0VMGR![]() | NXP Semiconductors | Microcontroller RoHS : Compliant | 4,322 | |||
DAC5662AIPFBG4![]() | Texas Instruments | D/A Converter, 2 Func, Parallel, Word Input Loading, 0.02us Settling Time, PQFP48 RoHS : Compliant | 4,186 | |||
DAC5662IPFBG4![]() | Texas Instruments | D/A Converter, 2 Func, Parallel, Word Input Loading, 0.02us Settling Time, PQFP48 RoHS : Compliant | 4,094 | |||
![]() Win Source Electronics | FDC5661N-F085 | onsemi | MOSFET N-CH 60V 4.3A SUPERSOT6 RoHS : Compliant |
| 71,627 | |
| ALC5660-CGT | Realtek Semiconductor | High-performance audio codec with advanced features |
| 7,359 | ||
| SPC5668GK0MMGR | Nexperia | MCU 32-bit e200 RISC 2MB Flash 3.3V/5V Automotive 208-Pin MAP-BGA T/R | IC MCU 32BIT 2MB FLASH 208MAPBGA |
| 2,800 | ||
| 2SC5664-E1-AZ | ROHM Semiconductor | Trans GP BJT NPN 3A Automotive 8-Pin SOP T/R |
| 2,785 | ||
| HMC566LP4ETR | Analog Devices Inc | IC RF AMP VSAT 28GHZ-36GHZ 24QFN RoHS : Compliant |
| 1,797 | ||
| HMC566LP4E | Analog Devices Inc | IC RF AMP GPS 28GHZ-36GHZ 24QFN RoHS : Compliant |
| 1,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |