C540G-P20-R Price, Revenda, Stock

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. BNC Male Right Angle to MHV Male Cable Using 75 Ohm RG59 Coax., Radio frequency assembly BNC male right angle to MHV male cable using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to MHV male cable using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and MHV cable connection on the other. Our right angle BNC to MHV cable assemblies have a male gender on end 1 and male on end 2. This BNC to MHV cable is a male to male coax assembly, PE3C5407, can also be known as a right angle BNC plug to MHV plug cable assembly and will be shipped same-day as it is purchased. BNC plug to MHV plug cable assembly PE3C5407 is built with RG59 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC right angle male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5407 can also be used in the other direction and will be MHV male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to MHV male cable using 75 Ohm RG59 coax.

PE3C5405

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity TNC Male Cable Using LMR-400-UF Coax., Radio frequency assembly N male to reverse polarity TNC male cable using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to reverse polarity TNC male cable using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our type N to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to reverse polarity TNC cable is a male to male coax assembly, PE3C5405, can also be known as a N type plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE3C5405 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5405 can also be used in the other direction and will be reverse polarity TNC male to N type male cable assembly if the opposite connectivity is required. Type N plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male cable using LMR-400-UF coax.

PE3C5406

Pasternack Enterprises

Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. LC Male Right Angle to N Male Cable Using RG213 Coax., Radio frequency assembly LC male right angle to N male cable using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. LC male right angle to N male cable using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle LC cable connection on one end and type N cable connection on the other. Our right angle LC to N type cable assemblies have a male gender on end 1 and male on end 2. This LC to type N cable is a male to male coax assembly, PE3C5406, can also be known as a right angle LC plug to N type plug cable assembly and will be shipped same-day as it is purchased. LC plug to type N plug cable assembly PE3C5406 is built with RG213 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with right angle LC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this LC right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5406 can also be used in the other direction and will be type N male to right angle LC male cable assembly if the opposite connectivity is required. LC right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to type N cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC male right angle to N male cable using RG213 coax.

PE3C5407/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. BNC Male Right Angle to MHV Male Cable Using 75 Ohm RG59 Coax with HeatShrink., Radio frequency assembly BNC male right angle to MHV male cable using 75 Ohm RG59 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to MHV male cable using 75 Ohm RG59 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and MHV cable connection on the other. Our right angle BNC to MHV cable assemblies have a male gender on end 1 and male on end 2. This BNC to MHV cable is a male to male coax assembly, PE3C5407/HS, can also be known as a right angle BNC plug to MHV plug cable assembly and will be shipped same-day as it is purchased. BNC plug to MHV plug cable assembly PE3C5407/HS is built with RG59 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC right angle male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5407/HS can also be used in the other direction and will be MHV male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MHV cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to MHV male cable using 75 Ohm RG59 coax with heatshrink.

PE3C5409

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using PE-C400 Coax., Radio frequency assembly N male right angle to N female cable using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female cable using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and N type cable connection on the other. Our right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C5409, can also be known as a right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C5409 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5409 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. N type right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female cable using PE-C400 coax.

PE3C5404/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to Reverse Polarity TNC Male Cable Using LMR-240 Coax with HeatShrink., Radio frequency assembly BNC male right angle to reverse polarity TNC male cable using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to reverse polarity TNC male cable using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and reverse polarity TNC cable connection on the other. Our right angle BNC to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to reverse polarity TNC cable is a male to male coax assembly, PE3C5404/HS, can also be known as a right angle BNC plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to reverse polarity TNC plug cable assembly PE3C5404/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5404/HS can also be used in the other direction and will be reverse polarity TNC male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to reverse polarity TNC male cable using LMR-240 coax with heatshrink.

PE3C5402/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMP Female Right Angle Cable Using RG405 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMP female right angle cable using RG405 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female right angle cable using RG405 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3C5402/HS, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3C5402/HS is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5402/HS can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female right angle cable using RG405 coax with heatshrink.

PE3C5402/SP

Pasternack Enterprises

PE3C5400

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to MMCX Plug Cable Using PE-SR405FL Coax., Radio frequency assembly D-Sub receptacle to MMCX plug cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. D-Sub receptacle to MMCX plug cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom D-Sub to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with D-Sub cable connection on one end and MMCX cable connection on the other. Our D-Sub to MMCX cable assemblies have a receptacle gender on end 1 and plug on end 2. This D-Sub to MMCX cable is a receptacle to plug coax assembly, PE3C5400, can also be known as a D-Sub receptacle to MMCX male cable assembly and will be shipped same-day as it is purchased. D-Sub receptacle to MMCX male cable assembly PE3C5400 is built with PE-SR405FL which is a formable coax type. The Pasternack formable D-Sub cable assembly is manufactured with D-Sub to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this D-Sub receptacle to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5400 can also be used in the other direction and will be MMCX plug to D-Sub receptacle cable assembly if the opposite connectivity is required. D-Sub receptacle to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality D-Sub to MMCX cable assembly for quick shipment worldwide. Variations of D-Sub cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this D-Sub receptacle to MMCX plug cable using PE-SR405FL coax.

PE3C5400/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to MMCX Plug Cable Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly D-Sub receptacle to MMCX plug cable using PE-SR405FL coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. D-Sub receptacle to MMCX plug cable using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom D-Sub to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with D-Sub cable connection on one end and MMCX cable connection on the other. Our D-Sub to MMCX cable assemblies have a receptacle gender on end 1 and plug on end 2. This D-Sub to MMCX cable is a receptacle to plug coax assembly, PE3C5400/HS, can also be known as a D-Sub receptacle to MMCX male cable assembly and will be shipped same-day as it is purchased. D-Sub receptacle to MMCX male cable assembly PE3C5400/HS is built with PE-SR405FL which is a formable coax type. The Pasternack formable D-Sub cable assembly is manufactured with D-Sub to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this D-Sub receptacle to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5400/HS can also be used in the other direction and will be MMCX plug to D-Sub receptacle cable assembly if the opposite connectivity is required. D-Sub receptacle to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality D-Sub to MMCX cable assembly for quick shipment worldwide. Variations of D-Sub cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this D-Sub receptacle to MMCX plug cable using PE-SR405FL coax with heatshrink.

PE3C5402

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMP Female Right Angle Cable Using RG405 Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female right angle cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3C5402, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3C5402 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5402 can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female right angle cable using RG405 coax.

PE3C5403

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to Trimmed Lead Cable Using RG316 Coax., Radio frequency assembly BNC male to trimmed lead cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to trimmed lead cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to Trimmed Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and Trimmed Lead cable connection on the other. Our BNC to Trimmed Lead cable assemblies have a male gender on end 1 and sexless on end 2. This BNC to Trimmed Lead cable is a male to sexless coax assembly, PE3C5403, can also be known as a BNC plug to Trimmed Lead sexless cable assembly and will be shipped same-day as it is purchased. BNC plug to Trimmed Lead sexless cable assembly PE3C5403 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to Trimmed Lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to Trimmed Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5403 can also be used in the other direction and will be Trimmed Lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to Trimmed Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to Trimmed Lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to trimmed lead cable using RG316 coax.

PE3C5405/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to N Male Cable Using LMR-400-UF Coax with HeatShrink. PE3C5405/HS is a reverse polarity TNC male to N male cable using LMR-400-UF coax. This Pasternack reverse polarity TNC male to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5405/HS TNC reverse polarity male to N male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C5404

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to Reverse Polarity TNC Male Cable Using LMR-240 Coax., Radio frequency assembly BNC male right angle to reverse polarity TNC male cable using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to reverse polarity TNC male cable using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and reverse polarity TNC cable connection on the other. Our right angle BNC to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to reverse polarity TNC cable is a male to male coax assembly, PE3C5404, can also be known as a right angle BNC plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to reverse polarity TNC plug cable assembly PE3C5404 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5404 can also be used in the other direction and will be reverse polarity TNC male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to reverse polarity TNC male cable using LMR-240 coax.

Vyrian

SNC5408W

Texas Instruments

AND Gate, 4-Func, 2-Input, TTL, CDFP14
RoHS : Not Compliant

8,741

SN74HC540DWR-00

Texas Instruments

Bus Driver, HC/UH Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20

8,185

SN74AHC540DBLE

Texas Instruments

Bus Driver, AHC/VHC/H/U/V Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20
RoHS : Not Compliant

8,033

74HC540PWJ

Nexperia

RoHS : Compliant

7,596

SN74HC540DWRG4

Texas Instruments

Bus Driver, HC/UH Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20
RoHS : Compliant

7,005

74HC540D-Q100J

Nexperia

Bus Driver, HC/UH Series, 1-Func, 8-Bit, Inverted Output, CMOS, PDSO20
RoHS : Compliant

6,629

TMS320VC5409AGGU-160

Texas Instruments

Digital Signal Processor, 16-Ext Bit, 20MHz, CMOS, PBGA144

6,627

TMS320VC5409AZWS16

Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PBGA144
RoHS : Compliant

6,163

TLC540IN3

Texas Instruments

Analog Circuit
RoHS : Not Compliant

4,854

SNJ54AHC540FKR

Texas Instruments

Bus Driver, AHC/VHC/H/U/V Series, 1-Func, 8-Bit, Inverted Output, CMOS, CQCC20

4,309

SN74HC540J

Texas Instruments

Bus Driver, 1-Func, 8-Bit, Inverted Output, CMOS, CDIP20
RoHS : Not Compliant

3,827

XC5406L-4VQ100I

AMD Xilinx

Field Programmable Gate Array, PQFP100

3,759

TMS320UC5409PGE-80

Texas Instruments

Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 20MHz, CMOS, PQFP144
RoHS : Compliant

3,303

XC5404-4PQ160C

AMD Xilinx

Field Programmable Gate Array, CMOS, PQFP160

2,309

XC5404L-4PC84I

AMD Xilinx

Field Programmable Gate Array, PQCC84

1,209

Win Source Electronics

SN74HC540PW

Texas Instruments

IC BUFFER INVERT 6V 20TSSOP / Buffer, Inverting 1 Element 8 Bit per Element 3-State Output 20-TSSOP
RoHS : Compliant

204 : $1.4718
153 : $1.6416
118 : $1.6982
86 : $1.7548
56 : $1.8114
23 : $2.2077

77,095

74VHC540FT

Toshiba America Electronic Components

CMOS Digital Integrated Circuits Silicon Monolithic | IC BUFFER INVERT 5.5V 20TSSOP
RoHS : Compliant

2,470 : $0.1215
1,845 : $0.1356
1,430 : $0.1402
1,040 : $0.1449
670 : $0.1496
275 : $0.1823

66,860

SN74HC540DWR

Texas Instruments

IC INVERTER 8-INPUT 20SOIC
RoHS : Compliant

910 : $0.3695
680 : $0.4122
530 : $0.4263
385 : $0.4405
250 : $0.4547
105 : $0.5542

30,000

74HC540D

Nexperia

IC INVERTER 8-INPUT 20SOIC
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

30,000

SN74HC540PWR

Texas Instruments

IC INVERTER 8-INPUT 20TSSOP
RoHS : Compliant

925 : $0.3245
695 : $0.3619
535 : $0.3744
390 : $0.3868
255 : $0.3993
105 : $0.4867

24,300

SN74HC540PWT

Texas Instruments

IC BUFFER INVERT 6V 20TSSOP / Buffer, Inverting 1 Element 8 Bit per Element 3-State Output 20-TSSOP
RoHS : Compliant

1,500 : $0.2247
1,200 : $0.2337
925 : $0.2429
645 : $0.2612
415 : $0.2703
195 : $0.2885

24,200

SN74HC540DW

Texas Instruments

IC BUFFER INVERT 6V 20SOIC
RoHS : Compliant

1,025 : $0.3279
770 : $0.3658
595 : $0.3783
430 : $0.391
280 : $0.4035
115 : $0.4918

12,700

SN74LVC540APW

Texas Instruments

IC BUFFER INVERT 3.6V 20TSSOP
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

11,043

HMC540SLP3E

Analog Devices Inc

1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz | RF ATTENUATOR 15DB 16VFQFN
RoHS : Compliant

163 : $2.0717
130 : $2.1559
100 : $2.24
70 : $2.4084
45 : $2.4927
22 : $2.6611

10,248

SN74LVC540APWT

Texas Instruments

IC BUFF/DVR 3ST OCTAL 20TSSOP
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

10,060

HMC540SLP3ETR

Analog Devices Inc

RF ATTENUATOR 15DB 16VFQFN
RoHS : Compliant

163 : $2.0717
130 : $2.1559
100 : $2.24
70 : $2.4084
45 : $2.4927
22 : $2.6611

9,360

SN74LVC540APWRG4

Texas Instruments

Octal Buffers/Drivers with 3-State Outputs | IC BUFFER INVERT 3.6V 20TSSOP
RoHS : Compliant

325 : $0.9319
260 : $0.9697
200 : $1.0076
140 : $1.0834
90 : $1.1213
45 : $1.197

8,990

TMS320VC5402PGE100

Texas Instruments

IC DIG SIG PROCESSOR 144-LQFP / DSP Fixed-Point 16bit 100MHz 100MIPS 144-Pin LQFP Tray
RoHS : Compliant

25 : $12.2282
19 : $13.6392
15 : $14.1095
11 : $14.5798
7 : $15.0501
3 : $18.3423

4,300

TMS320VC5402ZGU100

Texas Instruments

FIXED-POINT DIGITAL SIGNAL PROCESSOR
RoHS : Compliant

9 : $40.2912
7 : $44.9402
5 : $46.4899
4 : $48.0395
3 : $49.5892
1 : $60.4369

1,400

TMS320VC5409PGE100

Texas Instruments

IC DIG SIG PROCESSOR 144-LQFP
RoHS : Compliant

5 : $69.5404
4 : $77.5643
3 : $80.2388
2 : $82.9135
1 : $85.5882

272

C540G-P20-R Revenda

Ligação URL