| Os motores de busca de Datasheet de Componentes eletrônicos |
|
C1111SLASH7 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() TME | BZV90-C11,115![]() | Nexperia | Diode: Zener; 1.5W; 11V; SMD; SOT223; Ifmax: 400mA; single diode RoHS : Compliant |
| 854 | |
| 55AC1111-22-9-9CS2826C | TE Connectivity | Wire; Cu; 22AWG |
| 190 | ||
| 55PC1111-14-9-9 | TE Connectivity | Wire; Cu; 14AWG RoHS : Compliant |
| 131 | ||
| 55PC1111-18-9-9 | TE Connectivity | Wire; Cu; 18AWG RoHS : Compliant |
| 31 | ||
| FN2520-10-05-C1111 | TE Connectivity | Filter: anti-interference; single-phase; on panel; 820uA; 277VAC RoHS : Compliant |
| 8 | ||
| TPC111107 | FIBOX | Enclosure: multipurpose; X: 110mm; Y: 110mm; Z: 65mm; TEMPO; grey |
| 0 | ||
| LPC1111FHN33/103K | NXP Semiconductors | IC: ARM microcontroller; 2kBSRAM,8kBFLASH; VQFN32; 1.8÷3.6VDC |
| 0 | ||
LPC1111FHN33/201,5![]() | NXP Semiconductors | IC: ARM microcontroller; 4kBSRAM,8kBFLASH; HVQFN33; 1.8÷3.6VDC RoHS : Compliant |
| 0 | ||
| 131C11119X | Amphenol CONEC | Contact; male; data transfer; copper alloy; gold-plated; crimped |
| 0 | ||
| QR/P8-SC-111(12) | Hirose Electric Co Ltd | Connector: wire-wire; CL0221-0183-0-12 RoHS : Compliant |
| 0 | ||
LPC1111FHN33/101![]() | NXP Semiconductors | IC: ARM microcontroller; 2kBSRAM,8kBFLASH; QFN32; 1.8÷3.6VDC RoHS : Compliant |
| 0 | ||
| HR34B-SC1-111 | Hirose Electric Co Ltd | Contact; female; industrial; HR34B; crimped; for cable; 400VAC RoHS : Compliant |
| 0 | ||
BZX585-C11,115![]() | Nexperia | Diode: Zener; 0.3W; 11V; SMD; SOD523; Ifmax: 200mA; single diode RoHS : Compliant |
| 0 | ||
LPC1111FHN33/203,5![]() | NXP Semiconductors | IC: ARM microcontroller; 4kBSRAM,8kBFLASH; VQFN32; 1.8÷3.6VDC RoHS : Compliant |
| 0 | ||
LPC1111JHN33/103E![]() | NXP Semiconductors | IC: ARM microcontroller; 2kBSRAM,8kBFLASH; HVQFN33; 1.8÷3.6VDC RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | IFSC1111AZER220M01 | Vishay Intertechnologies | IFSC-1111AZ-01 22 20% ER E3 - Tape and Reel (Alt: IFSC1111AZER220M01) RoHS : Compliant |
| 4,000 | |
| IFSC1111ABER100M01 | Vishay Intertechnologies | - Product that comes on tape, but is not reeled (Alt: 47T5104) RoHS : Compliant |
| 0 | ||
| 62C1111-02-040C | Grayhill Inc | - Bulk (Alt: 62C1111-02-040C) RoHS : Compliant |
| 0 | ||
| RNR60C1111BSM761 | Vishay Intertechnologies | Through Hole Resistor, 1.11 kohm, HDN RNR Series, 125 mW, ? 0.1%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RNR60C1111BSM761) RoHS : Not Compliant |
| 0 | ||
| 62C1111-01-P | Grayhill Inc | - Bulk (Alt: 62C1111-01-P) RoHS : Compliant |
| 0 | ||
| RNR55C1111BPBSL | Vishay Intertechnologies | - Bulk (Alt: RNR55C1111BPBSL) RoHS : Not Compliant |
| 0 | ||
| RNR60C1111BPRSL | Vishay Intertechnologies | - Custom Tape W/Leader (Alt: RNR60C1111BPRSL) RoHS : Not Compliant |
| 0 | ||
| RNR60C1111DSBSL | Vishay Intertechnologies | - Bulk (Alt: RNR60C1111DSBSL) RoHS : Not Compliant |
| 0 | ||
| RNR60C1111DSM761 | Vishay Intertechnologies | Through Hole Resistor, 1.11 kohm, HDN RNR Series, 125 mW, ? 0.5%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RNR60C1111DSM761) RoHS : Not Compliant |
| 0 | ||
| QR/P8-SC-111(12) | Hirose Electric Co Ltd | - Bulk (Alt: QR/P8-SC-111(12)) RoHS : Compliant |
| 0 | ||
| IFSC1111AZER6R8M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER6R8M01) RoHS : Compliant |
| 0 | ||
| RNR60C1111BPBSL1 | Vishay Intertechnologies | - Bulk (Alt: RNR60C1111BPBSL1) RoHS : Not Compliant |
| 0 | ||
| IFSC1111ABER100M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111ABER100M01) RoHS : Compliant |
| 0 | ||
| SC-1111W | NIDEC Components | - Trays (Alt: SC-1111W) RoHS : Compliant |
| 0 | ||
LPC1111FHN33/102,5![]() | NXP Semiconductors | MCU 32-bit LPC1100 ARM Cortex M0 RISC 8KB Flash 3.3V 32-Pin HVQFN EP Tray - Trays (Alt: LPC1111FHN33/102,5) RoHS : Compliant |
| 0 | ||
![]() Newark | BZV55-C11,115![]() | Nexperia | Diode, Zener, 11V, 0.4W, Sod-80C; |Nexperia BZV55-C11,115 RoHS : Compliant |
| 20,000 | |
| IFSC1111ABER100M01 | Vishay Intertechnologies | Inductor, 10Uh, 1A, 20%, 5Mhz; |Vishay IFSC1111ABER100M01 RoHS : Compliant |
| 2,854 | ||
| IFSC1111ABER100M01 | Vishay Intertechnologies | Inductor, 10Uh, 1A, 20%, 5Mhz; |Vishay IFSC1111ABER100M01 RoHS : Compliant |
| 2,854 | ||
| IFSC1111AZER330M01 | Vishay Intertechnologies | Inductor, 33Uh, 0.4A, 20%, 5Mhz; |Vishay IFSC1111AZER330M01 RoHS : Compliant |
| 2,000 | ||
BZX585-C11,115![]() | Nexperia | Zener Diode, Aec-Q101, 11V, 0.3W, Sc-79; |Nexperia BZX585-C11,115 RoHS : Compliant |
| 1,795 | ||
BZX585-C11,115![]() | Nexperia | Zener Diode, Aec-Q101, 11V, 0.3W, Sc-79; |Nexperia BZX585-C11,115 RoHS : Compliant |
| 1,795 | ||
| IFSC1111AZER4R7M01 | Vishay Intertechnologies | Inductor, Shielded, 4.7Uh, 750Ma, Smd; P |Vishay IFSC1111AZER4R7M01 RoHS : Compliant |
| 1,168 | ||
| IFSC1111AZER4R7M01 | Vishay Intertechnologies | Inductor, Shielded, 4.7Uh, 750Ma, Smd; P |Vishay IFSC1111AZER4R7M01 RoHS : Compliant |
| 1,168 | ||
| IFSC1111AZER6R8M01 | Vishay Intertechnologies | Inductor, 6.8Uh, 0.9A, 20%, 5Mhz; |Vishay IFSC1111AZER6R8M01 RoHS : Compliant |
| 1,015 | ||
| IFSC1111AZER6R8M01 | Vishay Intertechnologies | Inductor, 6.8Uh, 0.9A, 20%, 5Mhz; |Vishay IFSC1111AZER6R8M01 RoHS : Compliant |
| 1,015 | ||
LPC1111FHN33/202,5![]() | NXP Semiconductors | 32 Bit Microcontroller, Arm Cortex-M0, 5; |NXP Semiconductors LPC1111FHN33/202,5 RoHS : Compliant |
| 260 | ||
| IFSC1111ABER100M01 | Vishay Intertechnologies | Inductor, Shielded, 10Uh, 800Ma, Smd; Pr |Vishay IFSC1111ABER100M01 RoHS : Compliant |
| 14 | ||
| IFSC1111ABER100M01 | Vishay Intertechnologies | Inductor, Shielded, 10Uh, 800Ma, Smd; Pr |Vishay IFSC1111ABER100M01 RoHS : Compliant |
| 14 | ||
| UL TPC 111107 | FIBOX | Plastic Enclosure, Multipurpose; |Fibox UL TPC 111107 RoHS : Compliant |
| 7 | ||
| SPC11110 | SPC Multicomp | Pwr Distr, 6Outlets, 120V, 15A; |Multicomp SPC11110 RoHS : Not Compliant |
| 2 | ||
![]() Analog Devices Inc | DC1111A | Analog Devices Inc | LTC2753-16: 16-bit, Dual, Soft |
| 15 | |
![]() RS | 19178-0018 (C-111-10) | Woodhead Molex | HOOK KRIMPTITE (C-111-10) SPM |
| 8,000 | |
| FEC-11-11 (M230563) | Mersen Electrical Power | FUSE HOLDER, IN-LINE, CLASS CC,100KA,600VAC/DC,30A,1 POLE, CU CRIMP/CU CRIMP |
| 10 | ||
| XENC1111 | Schneider Electric | ELECTRIC XAC, XACB, XACM CONTACT BLOCK |
| 5 | ||
| CFC-1111 | Quest Technology International Inc | RF CONNECTOR CONNECTOR F MALE RG59 CABLE |
| 2 | ||
| MC-1111-E2-T | Moxa Inc | INDUSTRIAL PC, ATOM DUAL-CORE E3826, 4 GB, VGA, MC-1100 SERIES |
| 1 | ||
| 62C1111-02-060C | Grayhill Inc | ENCODER, OPTICAL, CONCENTRIC SHAFT, PUSHBUTTON, 32 POS DECK A/DECK B RoHS : Compliant |
| 1 | ||
| FEC-11-11-BA (N230564) | Mersen Electrical Power | FUSE HOLDER, IN-LINE, CLASS CC BREAKAWAY,100KA,600VAC/DC,30A,1P, CU CRIMP/CU CRIMP |
| 1 | ||
| FMC1111316 | Fairview Microwave Inc | N FEMALE BULKHEAD TO N FEMALE BULKHEAD CABLE RG316 COAX |
| 0 | ||
| 62C1111-01-P | Grayhill Inc | OPTICAL ENCODER, ROTATIONAL OUTPUT: QUADRATURE, ROTATIONAL POSITIONS - DECK A : RoHS : Compliant |
| 0 | ||
| FMC1111315-24 | Fairview Microwave Inc | N FEMALE BULKHEAD TO N FEMALE BULKHEAD CABLE RG-316 COAX IN 24 INCH |
| 0 | ||
| 62C1111-02-040C | Grayhill Inc | OPTICAL ENCODER, ROTATIONAL OUTPUT: QUADRATURE, ROTATIONAL POSITIONS - DECK A : RoHS : Compliant |
| 0 | ||
| FMC1111315LF-48 | Fairview Microwave Inc | N FEMALE BULKHEAD TO N FEMALE BULKHEAD CABLE RG-316 COAX IN 48 INCH WITH LF SOLD |
| 0 | ||
| VV5QC11-11C6FD0 | SMC Corporation of America | MANIFOLD ASSY, VQC SERIES |
| 0 | ||
| FVEC1111ND24SM6N | Fabco-Air | VALVE, SGL SOLENOID, 4 WAY, 1/8NPT, W/M6N MFLD, 24VDC, FVEC1 SERIES |
| 0 | ||
| VV5QC11-11C4SNAN-S | SMC Corporation of America | VQC MANIFOLD, VQC SERIES |
| 0 | ||
![]() Rochester Electronics | LPC1111FHN33/102,5![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M0 32Bit 1 Core FLASH 8kB (8k x 8) 50MHz 32-QFN Tray RoHS : Compliant |
| 546 | |
| LPC1111FHN33/102K | NXP Semiconductors | IC MCU ARM® Cortex®-M0 32Bit 1 Core FLASH 8kB (8k x 8) 50MHz 32-QFN Tray RoHS : Compliant |
| 14,610 | ||
BZV55-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 0.4W, Silicon, Unidirectional RoHS : Compliant |
| 269,890 | ||
LPC1111FHN33/101,5![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M0 32Bit 1 Core FLASH 8kB (8k x 8) 50MHz 32-QFN Tray RoHS : Compliant |
| 45 | ||
BZV49-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, TO-243AA RoHS : Compliant |
| 950 | ||
BZV85-C11,113![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, DO-41 RoHS : Compliant |
| 67,990 | ||
BZV90-C11,115![]() | NXP Semiconductors | Zener Diode, 11V V(Z), 5%, 1.5W, Silicon, Unidirectional RoHS : Compliant |
| 14,990 | ||
LPC1111JHN33/103E![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M0 32Bit 1 Core FLASH 8kB (8k x 8) 50MHz 32-QFN Tray RoHS : Compliant |
| 60 | ||
BZX585-C11,115![]() | Nexperia | Zener Diode Single 11V 300mW SOD-523 T/R RoHS : Compliant |
| 27,000 | ||
BZV55-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 0.4W, Silicon, Unidirectional RoHS : Compliant |
| 981,020 | ||
BZV49-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, TO-243AA RoHS : Compliant |
| 36,646 | ||
BZV85-C11,113![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 1W, Silicon, Unidirectional, DO-41 RoHS : Compliant |
| 48,000 | ||
BZV90-C11,115![]() | Nexperia | Zener Diode, 11V V(Z), 5%, 1.5W, Silicon, Unidirectional RoHS : Compliant |
| 27,000 | ||
CC1111F16RSP![]() | Texas Instruments | SoC, CMOS RoHS : Compliant |
| 735 | ||
| W48C111-16H | Cypress Semiconductor | Clock Generators and Synthesizers Frequency Generator 100MHz 28-SOP Tube RoHS : Not Compliant |
| 4,197 | ||
![]() Sager | 62C1111-02-040C | Grayhill Inc | Encoders 11.25deg or 32 Pos 4.0 Cable Connector RoHS : Compliant |
| 0 | |
| 62C1111-01-P | Grayhill Inc | Encoders 62C1111-01-P RoHS : Compliant |
| 0 | ||
| FN2520-20-05-C1111 | TE Connectivity | Power Line Filters Single phase filter 1HU 20 A, fast-on connectors, 9.4nF RoHS : Compliant |
| 0 | ||
| FN2520-20-07-C1111 | TE Connectivity | Power Line Filters Single phase filter 1HU 20 A, litz wire connections, 9.4nF RoHS : Compliant |
| 0 | ||
| Y26C11111FP | C&K Switches | Littelfuse | 0 | |||
| NRC111-10A-EA | IDEC Corporation | Circuit Breakers Circuit Protector 10A | 0 | |||
| NRC111-1A-EA | IDEC Corporation | Circuit Breakers Circuit Protector 1A | 0 | |||
| HJFC-1111112 | OTTO Engineering Inc | Input Devices HJFC Foot Pedal 0.225 Dia 12in Cable |
| 0 | ||
| T1-CC1111 | OTTO Engineering Inc | Multi-Directional Switches Rocker Press Fit Standard Red RoHS : Unknown |
| 0 | ||
| 55PC1111-22-9-92CS2502 | TE Connectivity | TE Connectivity 55PC1111-22-9-92CS2502 | 0 | |||
| 62C1111-01-060C | Grayhill Inc | Encoders 62C1111-01-060C RoHS : Compliant |
| 0 | ||
| 62C1111-02-120C | Grayhill Inc | Encoders Encoder, Concentric, 11.25° or 32 positions (deck A), Concentric, 11.25° or 32 positions (deck B), pushbutton, 12.0in. cable, connector RoHS : Compliant | 0 | |||
| 62C1111-02-040S | Grayhill Inc | Encoders 62C1111-02-040S RoHS : Compliant |
| 0 | ||
| 62C1111-02-020C | Grayhill Inc | Encoders 62C1111-02-020C RoHS : Compliant |
| 0 | ||
| FN2520-10-08-C1111 | TE Connectivity | Power Line Filters Single phase filter 1HU 10 A, threaded bolt connector, 9.4nF RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | CC1111F32RSPR![]() | Texas Instruments | IC SUB1GHZ W/MCU USB 32KB 36-QFN RoHS : Compliant | 49,773 | ||
CC1111F32RSP![]() | Texas Instruments | IC SOC RF TXRX/USB CTRLR 36-QFN RoHS : Compliant | 22,720 | |||
CC1111F8RSP![]() | Texas Instruments | CC1111F8RSP RoHS : Compliant | 8,774 | |||
![]() ComSIT USA | W48C11116H | Cypress Semiconductor | FREQUENCY GENERATOR FOR INTEGRATED CORE LOGIC Processor Specific Clock Generator, 100MHz, CMOS, PDSO28 RoHS : Not Compliant | 45 | ||
![]() Interstate Connecting Components | 55PC1111-10-9-9.M | TE Connectivity | 55PC1111-10-9-9 | 0 | ||
| 55PC1111-16-9-9CS2970 | TE Connectivity | 55PC1111-16-9-9CS2970 | 0 | |||
| 55PC1111-22-9-92CS2502 | TE Connectivity | 55PC1111-22-9-92CS2502 | 0 | |||
| U90C1111001 | Amphenol FCi | QSFP CAGE 1 DEG OPEN TOP | 0 | |||
| U90C1111001 | Amphenol High Speed Interconnects | QSFP CAGE 1 DEG OPEN TOP | 0 | |||
| 55PC1111-20-9-4CS2970 | TE Connectivity | 55PC1111-20-9-4CS2970 | 0 | |||
| 55PC1111-20-9-9CS2502 | TE Connectivity | 55PC1111-20-9-9CS2502 | 0 | |||
| 55PC1111-22-9-3 | TE Connectivity | 55PC1111-22-9-3 RoHS : Compliant | 0 | |||
| 55PC1111-22-9-9CS2606 | TE Connectivity | 55PC1111-22-9-9CS2606 | 0 | |||
| 55PC1111-12-9-9CS2970 | TE Connectivity | 55PC1111-12-9-9CS2970 | 0 | |||
| 55PC1111-22-9-95 | TE Connectivity | 55PC1111-22-9-95 RoHS : Compliant | 0 | |||
| 55PC1111-24-9-3 | TE Connectivity | 55PC1111-24-9-3 RoHS : Compliant | 0 | |||
| 55PC1111-18-9-9 | TE Connectivity | 55PC1111-18-9-9 RoHS : Compliant | 0 | |||
| 55PC1111-20-9-92CS2502 | TE Connectivity | 55PC1111-20-9-92CS2502 | 0 | |||
| 55PC1111-14-9-9 | TE Connectivity | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 55PC1111-22-9-9CS2606 | TE Connectivity | Connectors |
| 76,276 | |
| 55PC1111-20-9-9CS2606 | TE Connectivity | Connectors |
| 42,201 | ||
| 55PC1111-10-9-9CS2502 | TE Connectivity | Connectors |
| 1,228 | ||
| 55PC1111-12-9-9-F891 | TE Connectivity | Connectors RoHS : Compliant |
| 657 | ||
| 55PC1111-22-9-9CS2502 | TE Connectivity | SPEC55 HOOKUP WIRE PC1111 22AWG RoHS : Compliant |
| 311 | ||
| 55AC1111-22-9-9CS2826C | TE Connectivity | Connectors |
| 125 | ||
![]() PUI | 8933-C111158GAACD02B | 190 | ||||
| 8933-C111158BAACA12A | 18 | |||||
![]() Chip 1 Exchange | A1C/11.11.2008 | INSTOCK | 2,360 | |||
![]() Avnet Abacus | 62C1111-01-P | Grayhill Inc | (Alt: 62C1111-01-P) RoHS : Compliant | 0 | ||
| 3310C-111-102 | Bourns Inc | POT TRIMMER PANEL 1K SINGLE TURN (Alt: 3310C-111-102) RoHS : Not Compliant | 0 | |||
| 3310C-111-103L | Bourns Inc | Rotary Potentiometer Conductive Plastic 10 kOhm 1Turn Linear 250 mW 20 (Alt: 3310C-111-103L) RoHS : Compliant | 0 | |||
| 62C1111-02-040C | Grayhill Inc | (Alt: 62C1111-02-040C) RoHS : Compliant | 0 | |||
| 62C1111-02-040S | Grayhill Inc | (Alt: 62C1111-02-040S) RoHS : Compliant | 0 | |||
| 62C1111-02-020C | Grayhill Inc | Concentric Shaft Optical Encoder 8Pin (Alt: 62C1111-02-020C) RoHS : Compliant | 0 | |||
| 62C1111-02-060C | Grayhill Inc | Concentric Shaft Optical Encoder 8Pin (Alt: 62C1111-02-060C) RoHS : Compliant | 0 | |||
| QR/P8-SC-111(12) | Hirose Electric Co Ltd | (Alt: CL0221-0183-0-12) RoHS : Compliant | 0 | |||
| IFSC1111AZER2R2M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER2R2M01) RoHS : Compliant | 0 | |||
| IFSC1111AZER6R8M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER6R8M01) RoHS : Compliant | 0 | |||
| IFSC1111ABER100M01 | Vishay Intertechnologies | IFSC1111AB01 10 20 ER E3 - Tape and Reel (Alt: IFSC1111ABER100M01) RoHS : Compliant | 0 | |||
| IFSC1111AZER1R0M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER1R0M01) RoHS : Compliant | 0 | |||
| IFSC1111AZER4R7M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER4R7M01) RoHS : Compliant | 0 | |||
| IFSC1111AZER100M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER100M01) RoHS : Compliant | 0 | |||
| IFSC1111AZER470M01 | Vishay Intertechnologies | - Tape and Reel (Alt: IFSC1111AZER470M01) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BZT52H-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 830mW 2-Pin SOD-123F T/R (Alt: BZT52H-C11,115) RoHS : Compliant |
| 48,000 | |
| IFSC1111AZER6R8M01 | Vishay Intertechnologies | (Alt: IFSC1111AZER6R8M01) RoHS : Compliant | 0 | |||
BZX585-C11,115![]() | Nexperia | (Alt: BZX585-C11,115) RoHS : Compliant | 0 | |||
BZV55-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 500mW 2-Pin Mini-MELF T/R (Alt: BZV55-C11,115) RoHS : Compliant | 0 | |||
| IFSC1111ABER2R2M03 | Vishay Intertechnologies | (Alt: IFSC1111ABER2R2M03) RoHS : Compliant | 0 | |||
BZX384-C11,115![]() | Nexperia | Diode Zener Single 11V 5% 300mW 2-Pin SOD-323 T/R (Alt: BZX384-C11,115) RoHS : Compliant | 0 | |||
BZX79-C11,113![]() | Nexperia | NPABZX79-C11,113 PROD.BZX79 (SOD27) (Alt: BZX79-C11,113) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BZV55-C11,115![]() | Nexperia | Diode Zener Single 11V 5 500mW 2Pin MiniMELF TR (Alt: BZV55-C11,115) RoHS : Compliant | 212,500 | ||
BZX84J-C11,115![]() | Nexperia | (Alt: BZX84J-C11,115) RoHS : Compliant | 15,000 | |||
BZV49-C11,115![]() | Nexperia | Diode Zener Single Dual Anode 11V 5 1W 4Pin3Tab SOT89 TR (Alt: BZV49-C11,115) RoHS : Compliant | 0 | |||
BZV85-C11,113![]() | Nexperia | Diode Zener Single 11V 5 13W 2Pin DO41 TR (Alt: BZV85-C11,113) RoHS : Compliant | 0 | |||
BZX79-C11,113![]() | Nexperia | Diode Zener Single 11V 5 500mW 2Pin ALF TR (Alt: BZX79-C11,113) RoHS : Compliant | 0 | |||
BZX384-C11,115![]() | Nexperia | Diode Zener Single 11V 5 300mW 2Pin SOD323 TR (Alt: BZX384-C11,115) RoHS : Compliant | 0 | |||
BZT52H-C11,115![]() | Nexperia | Diode Zener Single 11V 5 830mW 2Pin SOD123F TR (Alt: BZT52H-C11,115) RoHS : Compliant | 0 | |||
| LPC1111FHN33/102K | NXP Semiconductors | MCU 32Bit LPC1100L ARM CortexM0 RISC 8KB Flash 2KB SRAM 33Pin HVQFN TR (Alt: LPC1111FHN33/102K) RoHS : Compliant | 0 | |||
LPC1111JHN33/103E![]() | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 33Pin HVQFN EP Tray (Alt: LPC1111JHN33/103E) RoHS : Compliant | 0 | |||
| LPC1111FHN33/103K | NXP Semiconductors | MCU 32Bit LPC1100XL ARM CortexM0 RISC 8KB Flash 2KB SRAM 33Pin HVQFN TR (Alt: LPC1111FHN33/103K) RoHS : Compliant | 0 | |||
| LPC1111FHN33/203,551 | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 32Pin HVQFN EP Tray (Alt: LPC1111FHN33/203,5) RoHS : Compliant | 0 | |||
| LPC1111FHN33/101,551 | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 32Pin HVQFN EP Tray (Alt: LPC1111FHN33/101,5) RoHS : Compliant | 0 | |||
| LPC1111FHN33/202,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM0 50 MHz 8 KB 4 KB 33 Pins HVQFN (Alt: LPC1111FHN33/202,5) RoHS : Compliant | 0 | |||
| LPC1111FHN33/102,518 | NXP Semiconductors | MCU 32Bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 32Pin HVQFN EP (Alt: LPC1111FHN33/102'5) RoHS : Compliant | 0 | |||
| LPC1111FDH20/002,518 | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 20Pin TSSOP TR (Alt: LPC1111FDH20/002,5) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | DPC-1111-08 | Defond Group | IN STOCK SHIP TODAY |
| 3,000 | |
| SC11111CV/AAA | Sierra Semiconductor | IN STOCK SHIP TODAY | 387 | |||
| LPC1111FHN33/1015 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 51 | ||
| CW-2C-1-111-5% | Vishay Dale | IN STOCK SHIP TODAY |
| 19 | ||
| 71-C111-10-1 | ECS International Inc | IN STOCK SHIP TODAY | 17 | |||
![]() DB Roberts | AC-11-111-11 | Southco | AC-11-111-11 | 0 | ||
![]() EBV Elektronik | LPC1111FHN33/102![]() | NXP Semiconductors | SOT86532BIT ARM M3 CORE 12NC 935293874518 (Alt: LPC1111FHN33/102) RoHS : Compliant | 0 | ||
| LPC1111FHN33/102K | NXP Semiconductors | MCU 32Bit LPC1100L ARM CortexM0 RISC 8KB Flash 2KB SRAM 33Pin HVQFN TR (Alt: LPC1111FHN33/102K) RoHS : Compliant | 0 | |||
LPC1111JHN33/103E![]() | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 33Pin HVQFN EP Tray (Alt: LPC1111JHN33/103E) RoHS : Compliant | 0 | |||
| LPC1111FHN33/103K | NXP Semiconductors | MCU 32Bit LPC1100XL ARM CortexM0 RISC 8KB Flash 2KB SRAM 33Pin HVQFN TR (Alt: LPC1111FHN33/103K) RoHS : Compliant | 0 | |||
LPC1111FHN33/101,5![]() | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 32Pin HVQFN EP Tray (Alt: LPC1111FHN33/101,5) RoHS : Compliant | 0 | |||
LPC1111FHN33/202,5![]() | NXP Semiconductors | (Alt: LPC1111FHN33/202,5) RoHS : Compliant | 0 | |||
LPC1111FHN33/201,5![]() | NXP Semiconductors | MCU 32bit LPC1100 ARM Cortex M0 RISC 8KB Flash 33V 32Pin HVQFN EP Tray (Alt: LPC1111FHN33/201,5) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LPC1111FHN33/202![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 107,920 | |
| LPC1111FHN33/103K | NXP Semiconductors | Stock, Ship Today |
| 12,830 | ||
LPC1111JHN33/203E![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 6,500 | ||
LPC1111FHN33/203,5![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 6,390 | ||
LPC1111JHN33/103E![]() | NXP Semiconductors | Stock RoHS : Compliant | 3,640 | |||
LPC1111FHN33/102,5![]() | NXP Semiconductors | Stock RoHS : Compliant | 3,380 | |||
LPC1111JHN33/203![]() | NXP Semiconductors | Stock | 1,040 | |||
LPC1111FHN33/202,5![]() | NXP Semiconductors | Stock RoHS : Compliant | 520 | |||
LPC1111FHN33/101,5![]() | NXP Semiconductors | Stock RoHS : Compliant | 245 | |||
![]() Master Electronics | 55PC1111-22-9-9CS2606 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55PC1111-22-9-9CS2606 RoHS : Compliant |
| 116,387 | |
| 55PC1111-20-9-9CS2502 | TE Connectivity | A 20 AWG single-conductor shielded and jacketed general-purpose cable rated for 600V and 150°C. RoHS : Compliant |
| 2,270 | ||
| R1G190-AC11-11 | ebm-papst | The R1G190-AC11-11 is a 190mm backward-curved motorized impeller designed for centrifugal fan applications. RoHS : Compliant |
| 2 | ||
| 62C1111-02-040C | Grayhill Inc | Optical Encoder Rotary Incremental Flat 2oz.in Straight Digital Square Wave Panel Mount Cable 8CPR RoHS : Compliant |
| 1 | ||
| FN2520-20-05-C1111 | TE Connectivity | LINE FLTR 400VDC 277VAC 20A CHAS MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC1111-16-9-9CS2970 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55PC1111-16-9-9CS2970 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC1111-22-9-92CS2502 | TE Connectivity | 55PC1111-22-9-92CS2502 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3310C-111-103L | Bourns Inc | Res Conductive Plastic POT 10K Ohm 20% 0.25W(1/4W) 1(Elec)/1(Mech)Turn 3.18mm Pin Panel Mount/Through Hole RoHS : Compliant |
| 0 | ||
| FN2520-10-08-C1111 | TE Connectivity | Single phase filter 1HU 10 A threaded bolt connec RoHS : Compliant |
| 0 | ||
| FN2520-32-103-C1111 | TE Connectivity | Single phase filter 1HU 32 A clamp connector 9. RoHS : Compliant |
| 0 | ||
| 55PC1111-20-9-4CS2970 | TE Connectivity | 55PC1111-20-9-4CS2970 MOQ Reduction RoHS : Compliant |
| 0 | ||
| MOLC-111-11-SM-Q | Samtec Inc | .050 FOURRAY™ Quad Row Terminal Strip RoHS : Compliant |
| 0 | ||
| FN2520-15-05-C1111 | TE Connectivity | Single phase filter 1HU 15 A fast-on connectors 9 RoHS : Compliant |
| 0 | ||
| 55PC1111-22-9-3 | TE Connectivity | 55PC1111-22-9-3 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC1111-12-9-9CS2970 | TE Connectivity | 55PC1111-12-9-9CS2970 MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | FN2520-20-07-C1111 | Schaffner | Power Line Filters Single phase filter 1HU 20 A, litz wire connections, 9.4nF RoHS : Compliant |
| 50 | |
| FN2520-10-08-C1111 | Schaffner | Power Line Filters RoHS : Compliant |
| 50 | ||
| FN2520-15-05-C1111 | Schaffner | Power Line Filters RoHS : Compliant |
| 50 | ||
| FN2520-15-05-C1111 | TE Connectivity | Power Line Filters FN2520-15-05-C1111 RoHS : Compliant |
| 50 | ||
| 62C1111-02-060C | Grayhill Inc | Encoders 11.25deg or 32 Pos 6in Cable Connector RoHS : Compliant |
| 50 | ||
| FN2520-20-08-C1111 | Schaffner | Power Line Filters RoHS : Compliant |
| 50 | ||
| FN2520-15-07-C1111 | Schaffner | Power Line Filters FN2520-15-07-C1111 RoHS : Compliant |
| 50 | ||
| 62C1111-01-040C | Grayhill Inc | Encoders 62C1111-01-040C RoHS : Compliant |
| 22 | ||
| 62C1111-01-P | Grayhill Inc | Encoders 62C1111-01-P 62C1111-01-P or 16 positions, pushbutton, 10.0in. cable, connector, .050in. Centers RoHS : Compliant |
| 21 | ||
| T2-MC1111 | OTTO Engineering Inc | Toggle Switches 2-Way Plus Center Pushbutton Mini Trim Switch |
| 3 | ||
| 62C1111-02-020C | Grayhill Inc | Encoders 62C1111-02-020C RoHS : Compliant |
| 2 | ||
| 62C1111-02-040C | Grayhill Inc | Encoders 11.25deg or 32 Pos 4.0" Cable Connector RoHS : Compliant |
| 1 | ||
| FN2520-32-103-C1111 | Schaffner | Power Line Filters Single phase filter 1HU 32 A, clamp connector, 9.4nF RoHS : Compliant |
| 1 | ||
| FN2520-20-05-C1111 | Schaffner | Power Line Filters Single phase filter 1HU 20 A, fast-on connectors, 9.4nF RoHS : Compliant |
| 0 | ||
| SC-1111W | Nidec Corporation | Coded Rotary Switches dip rotary code hex,knob,real code,side adj. |
| 0 | ||
![]() Pasternack Enterprises US | PE3C11112-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-24 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-24 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | |
| PE3C11115-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115-48 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115-48 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115-48 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11115-48 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11118-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-12 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-12 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-12 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-12 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11118-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-48 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-48 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-48 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-48 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11112-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-36 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-36 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11118-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-36 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-36 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-36 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-36 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11114-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11114-12 low loss SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11114-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11114-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11114-12 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11114-12 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11113-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11113-12 low loss TNC male to TNC female bulkhead RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC bulkhead cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3C11113-12 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11113-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to bulkhead TNC female cable has a maximum VSWR of 1.5:1. This PE3C11113-12 TNC plug to TNC jack cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the solder attachment method, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11113-12 can also be used in the other direction and will be a TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. This low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1111 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using LMR-240 Coax. PE3C1111 is a SMA female to SMA male cable using LMR-240 coax. This Pasternack SMA female to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1111 SMA female to SMA male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C11114 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11114 low loss SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11114 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11114 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11114 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11114 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C11112-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-60 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-60 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11115 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11115 low loss type N female bulkhead to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11115 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11115 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our bulkhead type N female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11115 type N jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11115 can also be used in the other direction and will be a TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C11114-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11114-60 low loss SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11114-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11114-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11114-60 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11114-60 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11111 | Pasternack Enterprises | 0 | ||||
| PE3C11112-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-48 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-48 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
![]() Venkel Ltd. | C1111HQN101-102GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;1000pF;�2% RoHS : Compliant | 0 | ||
| C1111HQN101-1R3BNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;1.3pF;�0.1pF RoHS : Compliant | 0 | |||
| C1111HQN101-220FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;22pF;�1% RoHS : Compliant | 0 | |||
| C1111HQN101-391GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;390pF;�2% RoHS : Compliant | 0 | |||
| C1111HQN101-820JNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;100V;82pF;�5% RoHS : Compliant | 0 | |||
| C1111HQN152-180GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;1500V;18pF;�2% RoHS : Compliant | 0 | |||
| C1111HQN152-3R6CNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;1500V;3.6pF;�0.25pF RoHS : Compliant | 0 | |||
| C1111HQN201-1R8BNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;1.8pF;�0.1pF RoHS : Compliant | 0 | |||
| C1111HQN201-270FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;27pF;�1% RoHS : Compliant | 0 | |||
| C1111HQN201-7R0DNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;7pF;�0.5pF RoHS : Compliant | 0 | |||
| C1111HQN251-2R0BNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;250V;2pF;�0.1pF RoHS : Compliant | 0 | |||
| C1111HQN251-561FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;250V;560pF;�1% RoHS : Compliant | 0 | |||
| C1111HQN500-100FNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;50V;10pF;�1% RoHS : Compliant | 0 | |||
| C1111HQN500-1R1ANE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;50V;1.1pF;�0.05pF RoHS : Compliant | 0 | |||
| C1111HQN500-271GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;50V;270pF;�2% RoHS : Compliant | 0 | |||
![]() Vyrian | LPC1111FHN33/103![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 11,918 | ||
LPC1111FHN33/101,5![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 10,796 | |||
LPC1111FHN33/202,5![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 10,363 | |||
| MSP430C1111IDWR | Texas Instruments | Microcontroller, 16-Bit, MROM, MSP430 CPU, 8MHz, CMOS, PDSO20 | 9,450 | |||
MSP430C1111IPW![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FLASH, 8MHz, CMOS, PDSO20 | 8,565 | |||
LPC1111FHN33/103,5![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 7,423 | |||
LPC1111FHN33/203,5![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 7,330 | |||
| LPC1111FHN33/201,551 | NXP Semiconductors | RISC Microcontroller | 6,445 | |||
| SNJ54AC11112J | Texas Instruments | J-K Flip-Flop, 2-Func, Negative Edge Triggered, CMOS, CDIP16 RoHS : Not Compliant | 6,075 | |||
LPC1111FHN33/203![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQCC33 RoHS : Compliant | 5,909 | |||
LPC1111JHN33/103E![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 4,738 | |||
LPC1111FHN33/201,5![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33 RoHS : Compliant | 4,704 | |||
MSP430C1111IDW![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FLASH, 8MHz, CMOS, PDSO20 | 3,429 | |||
| UTC11-110M | Broadcom Limited | 3,374 | ||||
| SPC11110 | Multicomp Pro | Enclosures/Accessories | 241 | |||
![]() Win Source Electronics | BZV55-C11,115![]() | Nexperia | NEXPERIA BZV55-C11 - ZENER DIODE / Zener Diode 11 V 500 mW ±5% Surface Mount LLDS; MiniMelf RoHS : Compliant |
| 222,390 | |
BZT52H-C11,115![]() | Nexperia | DIODE ZENER 11V 375MW SOD123F RoHS : Compliant |
| 113,290 | ||
| LPC1111FHN33/102 | Nexperia |
| 10,412 | |||
CC1111F32RSP![]() | Texas Instruments | IC RF TXRX+MCU ISM RoHS : Compliant |
| 4,996 | ||
CC1111F32RSPR![]() | Texas Instruments | IC RF TXRX+MCU ISM RoHS : Compliant |
| 4,570 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |