Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  



A7524L-S08-R Revenda
RevendaNome de PeçasFabricante ElectrônicoDescrição ElectrónicosPriceQty.
BuyNow

ComSIT USA		TDA7529TX

 STMicroelectronics RF FRONT-END FOR AM/FM DSP CAR-RADIO WITH IF SAMPLING Analog Circuit, 1 Func, BICMOS, PQFP64
RoHS : Compliant
974

Richardson RFPD		MA752.B.ABICG.001

 Taoglas Antenna Solutions Antenna Mount -8.2dB Gain 6000MHz Box
RoHS : Compliant
19 : $274.49
0
CDS19FA752JO3

 Knowles CDE Cap Mica 0.0075uF 100V 5% (16.5 X 7.1 X 12.4mm) Ra
RoHS : Not Compliant
1 : $16.04
200 : $13.09
4,509 : $10.74
0

Avnet Asia		BZX84-A75,215

 Nexperia Diode Zener Single 75V 1% 250mW 3-Pin SOT-23 T/R (Alt: BZX84-A75,215)
RoHS : Compliant
0

Avnet Silica		BZX84-A75,215

 Nexperia Diode Zener Single 75V 1 250mW 3Pin SOT23 TR (Alt: BZX84-A75,215)
RoHS : Compliant
0

Braemac Americas-Symmetry		MA752.B.ABICG.001

 Taoglas Antenna Solutions Pantheon MA752.B 5in1 LTE MIMO, Wi-Fi MIMO and GPS/GLONASS Antenna
1 : $298.97
0

Component Electronics, Inc		CR21A7520FT

 IBS Electronics Inc IN STOCK SHIP TODAY
1,000 : $0.05
100 : $0.06
1 : $0.08
5,000

EBV Elektronik		MA752.B.ABICG.001

 Taoglas Antenna Solutions RF Antenna 49 to 585GHz MIMO WiFi 593dBi 50 ohm Linear (Alt: MA752.B.ABICG.001)
RoHS : Compliant
0

FDH Electronics		SJSA75200

 Amphenol PCD Connector
0

Neutron USA		A75-22-00-84

 ABB Low Voltage Products and Systems Contactor;NEMA;4 Pole;80A;110-120VAC@60Hz,110VAC@50Hz Coil;DIN Rail/Panel Mount
1 : $1,524.99
5
DA75-21A-11-84

 ABB Low Voltage Products and Systems Drive Contactor, 3P 2NO 1NC, Aux: 1/1, 60A, 120VAC Coil
1 : $1,859.23
0
DA75-20-11-84

 ABB Low Voltage Products and Systems Contactor; Reversing; DC; 120VAC Coil; 60A; 1NC-1NO; DIN Rail; DA Series
1 : $1,107.41
0
F-PBA75-2

 Cosel USA Inc Switching Power Supplies FRNT-RVRS ATTCHMNT PBA75F/PMA60F
1 : $126.31
0

Pasternack Enterprises US		PE3FCA752-3M

 Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-3M. Pasternack’s PE3FCA752-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $99.51
5 : $97.52
10 : $95.53
25 : $93.54
0
PE3FCA752-5M

 Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-5M. Pasternack’s PE3FCA752-5M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-5M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $106.07
5 : $103.95
10 : $101.83
25 : $99.71
0
PE3FCA752-1M

 Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-1M. Pasternack’s PE3FCA752-1M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-1M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $92.95
5 : $91.09
10 : $89.23
25 : $87.37
0
PE3FCA752-10M

 Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket-10M. Pasternack’s PE3FCA752-10M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752-10M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $122.46
5 : $120.01
10 : $117.56
25 : $115.11
0
PE3FCA752

 Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Connector 1 Series: MPO (w/ pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO/UPC Male (w/pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 12 Fiber, Single Mode OS2, LSZH Jacket. Pasternack’s PE3FCA752 fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This fan-out cable assembly is equipped with MPO (w/ pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as data center backbone and switch-to-server connectivity, high-density fiber patching and cross-connect systems, 40G and 100G single mode network deployments, MPO trunk to LC equipment breakout applications and enterprise and telecommunications fiber distribution. This fan-out cable has a single mode OS2 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA752 fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA752 fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/ pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
0

Win Source Electronics		PT7A7521WE

 Diodes Incorporated IC SUPERVISOR 1 CHANNEL 8SOIC
RoHS : Compliant
1,035 : $0.326
770 : $0.3637
600 : $0.3762
435 : $0.3888
280 : $0.4013
115 : $0.489
12,000
PT7A7521WEX

 Diodes Incorporated IC SUPERVISOR 4.63V 8SOIC
RoHS : Compliant
1,035 : $0.326
770 : $0.3637
600 : $0.3762
435 : $0.3888
280 : $0.4013
115 : $0.489
11,040

Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ]  

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com