| Os motores de busca de Datasheet de Componentes eletrônicos |
|
A6300AGSO8B Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() DigiKey | EMZA630ARA470MHA0G | United Chemi-Con Inc | CAP ALUM 47UF 20% 63V SMD |
| 15 | |
| EMZA630ARA470MHA0G | United Chemi-Con Inc | CAP ALUM 47UF 20% 63V SMD |
| 15 | ||
| EMZA630ARA470MHA0G | United Chemi-Con Inc | CAP ALUM 47UF 20% 63V SMD |
| 15 | ||
| 043500RA-63.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 050050LA-63.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 050125RA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 062200LA-63.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 075333LA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 016048LA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 018048LA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 025025RA-63.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 025200RA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 025333LA-63.00-T | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 027020RA-63.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| A630 | Test Products Inc | 10,000 PSI PRESSURE ADAPTER |
| 0 | ||
![]() Avnet Americas | SRMA630V223KFH | Surge Components Inc | - Ammo Pack (Alt: SRMA630V223KFH) RoHS : Compliant | 19,000 | ||
| B85321A2105A630 | TDK Corporation | - Boxed Product (Development Kits) (Alt: B85321A2105A630) RoHS : Compliant |
| 0 | ||
| YHVA630-2PHM-6MM-A | TE Connectivity | - Bag (Alt: YHVA630-2PHM-6MM-A) RoHS : Not Compliant |
| 0 | ||
| 983-0S 10-05 P6 A6304 | TE Connectivity | - Bag (Alt: ZPF000000000145724) RoHS : Compliant |
| 0 | ||
| SA2-A-6300-CLT-STD | Bourns Inc | - Tape and Reel (Alt: SA2-A-6300-CLT-STD) RoHS : Not Compliant |
| 0 | ||
| DSA6301JI2CB-033.3333VAO | Microchip Technology Inc | - Rail/Tube (Alt: DSA6301JI2CB-033.3333VAO) RoHS : Not Compliant |
| 0 | ||
| YHVA630-2PHM-4MM-A | TE Connectivity | Connector Housing Sealed Plug 2-Position 9.4mm Straight Cable Mount Carton - Bag (Alt: YHVA630-2PHM-4MM-A) RoHS : Not Compliant |
| 0 | ||
| DSA6301HA1AB-027.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 125C, 1.6 x 1.2mm - Tape and Reel (Alt: DSA6301HA1AB-027.0000TVAO) RoHS : Not Compliant |
| 0 | ||
| SF2T060332VA630TT | Vishay Intertechnologies | SF2T 0603 32V 0.63A SN TAPE&REEL - Tape and Reel (Alt: SF2T060332VA630TT) |
| 0 | ||
| DSA6301HA1AB-027.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 125C, 1.6 x 1.2mm - Bag (Alt: DSA6301HA1AB-027.0000VAO) RoHS : Not Compliant |
| 0 | ||
| B85321A2945A630 | TDK Corporation | Power Line Filter 50Hz/60Hz 63A 250VAC/350VDC Threaded Stud Wall Mount - Boxed Product (Development Kits) (Alt: B85321A2945A630) RoHS : Compliant |
| 0 | ||
| DSA6301JI2CB-062.5000TVAO | Microchip Technology Inc | - Tape and Reel (Alt: DSA6301JI2CB-062.5000TVAO) RoHS : Not Compliant |
| 0 | ||
| DSA6301JL1GB-025.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 25MHz, 50PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm - Rail/Tube (Alt: DSA6301JL1GB-025.0000VAO) RoHS : Not Compliant |
| 0 | ||
| DSA6301JL1LB-025.0000TVAO | Microchip Technology Inc | - Tape and Reel (Alt: DSA6301JL1LB-025.0000TVAO) RoHS : Not Compliant |
| 0 | ||
| DSA6301JA2AB-025.0000TVAO | Microchip Technology Inc | Spread Spectrum Osc. for Auto., +-0.25% SS, -40-125C, 25ppm, 2.5x2.0mm, 1k reel - Tape and Reel (Alt: DSA6301JA2AB-025.0000TVAO) RoHS : Not Compliant |
| 0 | ||
![]() Newark | XC6114A630MR-G | Torex Semiconductor LTD | VOLTAGE DETECTOR, -40 TO 85DEG C; RoHS : Compliant |
| 2,944 | |
| XC6114A630MR-G | Torex Semiconductor LTD | VOLTAGE DETECTOR, -40 TO 85DEG C; RoHS : Compliant |
| 2,944 | ||
| SF-2410FPA630W-2 | Bourns Inc | FUSE, AECQ200, FAST ACT, 6.3A/125V, 2410; RoHS : Compliant |
| 448 | ||
| SF-2410FPA630W-2 | Bourns Inc | FUSE, AECQ200, FAST ACT, 6.3A/125V, 2410; RoHS : Compliant |
| 448 | ||
| YHVA630-5PHM-6MM-A | TE Connectivity | AUTOMOTIVE CONN HOUSING, TAB, 5POS; RoHS : Compliant |
| 33 | ||
| AKUA630NN00410140000 | TE Connectivity | CIRCULAR CONN, RCPT, 12POS, CABLE; Product Range:-; Circular Connector Shell Style:Cable Mount Receptacle; No. of Contacts:12Contacts; Circular Contact Type:Crimp Pin - Contacts Not Supplied; Coupling Style:Quick Release RoHS Compliant: Yes RoHS : Compliant |
| 33 | ||
| DA63-06410A | Samsung Semiconductor | GROMMET HINGE-MID; RoHS : Not Compliant |
| 7 | ||
| 0697A6300-01 | Bel Fuse | FUSE, RADIAL, TIME DELAY, 6.3A, 250VAC; Fuse Current:6.3A; Voltage Rating VAC:250V; Product Range:RSTA Series; Voltage Rating VDC:63V; Blow Characteristic:Time Delay; Fuse Case Style:Radial Leaded; Breaking Capacity Current AC:100A RoHS Compliant: Yes RoHS : Compliant |
| 5 | ||
| LA 6 300 24 | Fischer Elektronik GmbH & Co KG | FAN COOLED HEAT SINK, 56 M3/H, 24VDC; RoHS : Compliant |
| 4 | ||
| DA63-08645A | Samsung Semiconductor | GUARD-JUMBO RoHS : Not Compliant |
| 3 | ||
| DA63-09775A | Samsung Semiconductor | GUARD-REF RIGHT RoHS : Not Compliant |
| 3 | ||
| DA63-08646A | Samsung Semiconductor | GALON DOOR BIN RoHS : Not Compliant |
| 2 | ||
| DA63-05131A | Samsung Semiconductor | SAMSUNG GUARD REF-UPP; RoHS : Not Compliant |
| 1 | ||
| DA63-07329A | Samsung Semiconductor | GROMMET HINGE; RoHS : Not Compliant |
| 1 | ||
| DA63-05232B | Samsung Semiconductor | COVER-LEG FRONT; RoHS : Not Compliant |
| 1 | ||
![]() RS | TCA-630MA | OptiFuse | FUSE, 6.3 X 32MM, CERAMIC, SLOW-BLOW, 250V, 630MA |
| 85 | |
| AA-630-8 (AA063008) | Isostatic Industries Inc | SLEEVE BEARING, AA-630-8 .376 X .627 X 3/8IN, POWDERED METAL BRONZE |
| 24 | ||
| PDG3X3TA630 | Eaton Cutler-Hammer | MOLDED CASE CIRCUIT BREAKER |
| 10 | ||
| JA6-3-050 | SMC Corporation of America | FLOATING JOINT, STANDARD, BASIC MOUNT, 6MM BORE, M3 X 0.5 THREAD RoHS : Compliant |
| 3 | ||
| F204A-63/0.03 110V | ABB Low Voltage Products and Systems | F204 63A 30MA 110V PB TEST VOLTAGE |
| 3 | ||
| A-630 | Dwyer Instruments Inc | A-630 3200 EXTRA ANGLE BRKT |
| 2 | ||
| NCGCA63-0875 | SMC Corporation of America | CYLINDER, ROUND BODY, NCG SERIES |
| 0 | ||
| NCDGCA63-0150 | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| NCDGCA63-0600 | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| NCDGFA63-0100 | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| NCDGLA63-0162 | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| DDA204A-63/0.3AE | ABB Low Voltage Products and Systems | DDA204 A-63/0.3 AE - RCD BLOCK |
| 0 | ||
| NCDGBA63-0500-H7A1 | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| NCDGBA63-0400-M9PSDPC | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
| NCDGLA63-0900-G59SAPCS | SMC Corporation of America | ROUND BODY CYLINDER, NCG SERIES |
| 0 | ||
![]() Microchip Technology Inc | DSA6301JA2AB-025.0000VAO | Microchip Technology Inc | Spread Spectrum Osc. for Auto., +-0.25% SS, -40-125C, 25ppm, 2.5x2.0mm, VLGA, Projected EOL: 2051-03-01 RoHS : Compliant |
| 559 | |
| DSA6301CI2CB-100.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 100MHz, 25ppm, 1.8-3.3V, -40 to 85C, 3.2x2.5mm, VDFN, Projected EOL: 2050-10-30 RoHS : Compliant |
| 0 | ||
| DSA6301HA1AB-027.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 125C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2046-07-18 RoHS : Compliant |
| 0 | ||
| DSA6301HI3KB-100.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 100.0000MHz, 20ppm, 1.8-3.3V, -40 to 85C, 1.6x1.2mm, VFLGA, Projected EOL: 2051-08-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSA6301HL1AB-027.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 105C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2045-12-26 RoHS : Compliant |
| 0 | ||
| DSA6301JA1AB-002.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 2MHz, 50PPM, 1.8-3.3V, -40 to 125C, 2.5 x 2.0mm, VLGA, Projected EOL: 2051-08-23 RoHS : Compliant |
| 0 | ||
| DSA6301JA2AB-002.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 125C, 2.5 x 2.0mm, VLGA, Projected EOL: 2051-08-23 RoHS : Compliant |
| 0 | ||
| DSA6301CI2CB-100.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 100MHz, 25ppm, 1.8-3.3V, -40 to 85C, 3.2x2.5mm, VDFN, Projected EOL: 2050-10-30 RoHS : Compliant |
| 0 | ||
| DSA6301HA1AB-027.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 125C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2046-08-30 RoHS : Compliant |
| 0 | ||
| DSA6301HI3KB-100.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 100.0000MHz, 20ppm, 1.8-3.3V, -40 to 85C, 1.6x1.2mm, VFLGA, Projected EOL: 2051-08-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSA6301HL1AB-027.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 27MHz, 50PPM, 1.8-3.3V, -40 to 105C, 1.6 x 1.2mm, VFLGA, Projected EOL: 2045-12-26 RoHS : Compliant |
| 0 | ||
| DSA6301JA1AB-002.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 2MHz, 50PPM, 1.8-3.3V, -40 to 125C, 2.5 x 2.0mm, VLGA, Projected EOL: 2051-08-23 RoHS : Compliant |
| 0 | ||
| DSA6301JA2AB-002.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 2MHz, 25PPM, 1.8-3.3V, -40 to 125C, 2.5 x 2.0mm, VLGA, Projected EOL: 2051-08-23 RoHS : Compliant |
| 0 | ||
| DSA6301JA2AB-025.0000TVAO | Microchip Technology Inc | Spread Spectrum Osc. for Auto., +-0.25% SS, -40-125C, 25ppm, 2.5x2.0mm, 1k reel, VLGA, Projected EOL: 2051-03-01 RoHS : Compliant |
| 0 | ||
| DSA6301JA2BB-012.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO,LVCMOS, 12MHz, 25PPM, 1.8-3.3V, -40 to 125C, 2.5 x 2.0mm, VLGA, Projected EOL: 2050-11-22 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | AA6303B-0.250-00 | Lyn-Tron Inc | 110 | |||
| BK/GDA-630MA | Eaton Bussmann | 44 | ||||
| 92010A630 | MACHINE SCREWS | 2 | ||||
| MS20001HA6-300 | BANDY Manufacturing | 1 | ||||
![]() TME | JFS7A6305J000000B | jb Capacitors Company | Capacitor: polypropylene; motors, run; 3uF; 450VAC; 38x17x28mm |
| 521 | |
| JFS15A6306J000000BB | jb Capacitors Company | Capacitor: polypropylene; motors, run; 3uF; 450VAC; Ø45x95mm; ±5% |
| 0 | ||
| EFI-P2 A 63/0.3 NL | ETI Polam | RCD breaker; Inom: 63A; Ires: 300mA; Poles: 2; 230V,240V; IP20; EFI |
| 0 | ||
| EFI-P4 A 63/0.03 NL | ETI Polam | RCD breaker; Inom: 63A; Ires: 30mA; Poles: 4; 400V,415V; IP20; EFI |
| 0 | ||
| EFI-P4 A 63/0.1 NL | ETI Polam | RCD breaker; Inom: 63A; Ires: 100mA; Poles: 4; 400V,415V; IP20; EFI |
| 0 | ||
| EFI-P4R A 63/0.03 | ETI Polam | RCD breaker; Inom: 63A; Ires: 30mA; Poles: 4; 400V,415V; IP20; EFI |
| 0 | ||
| EFI-P4 A 63/0.1 | ETI Polam | RCD breaker; Inom: 63A; Ires: 100mA; Poles: 4; 230V,400V; IP20; EFI |
| 0 | ||
| B41897A6308M000 | TDK Corporation | Capacitor: electrolytic; THT; 3mF; 50VDC; Ø18x35mm; Pitch: 7.5mm RoHS : Compliant |
| 0 | ||
| EFI-P2 A 63/0.03 NL | ETI Polam | RCD breaker; Inom: 63A; Ires: 30mA; Poles: 2; 230V,240V; IP20; EFI |
| 0 | ||
| EFI-P4 A 63/0.03 | ETI Polam | RCD breaker; Inom: 63A; Ires: 30mA; Poles: 4; 230V,400V; IP20; EFI |
| 0 | ||
| ALS70A181DA630 | KEMET Corporation | Capacitor: electrolytic; 180uF; 630VDC; Ø36x52mm; ±20%; 11000h RoHS : Compliant |
| 0 | ||
| JFS22A6305J000000B | jb Capacitors Company | Capacitor: polypropylene; motors, run; 3uF; 450VAC; Ø40x55mm; ±5% |
| 0 | ||
| EFI-P2R A 63/0.1 | ETI Polam | RCD breaker; Inom: 63A; Ires: 100mA; Poles: 2; 230V,240V; IP20; EFI |
| 0 | ||
| EFI-P4 A 63/0.3 | ETI Polam | RCD breaker; Inom: 63A; Ires: 300mA; Poles: 4; 230V,400V; IP20; EFI |
| 0 | ||
| EFI6-P4 A 63/0.1 | ETI Polam | RCD breaker; Inom: 63A; Ires: 100mA; Poles: 4; 400V,415V; IP20; EFI |
| 0 | ||
![]() ComSIT USA | SA630D01 | NXP Semiconductors | SINGLE POLE DOUBLE THROW (SPDT) SWITCH SPDT, 1 Func, 1 Channel, BICMOS, PDSO8 RoHS : Compliant | 50 | ||
![]() Interstate Connecting Components | YHVA630-2PHM-6MM-A | TE Connectivity | HVA630-2PHM,6SQMM,KEY A 2-2287490-1 RoHS : Compliant |
| 0 | |
| 983-0S 10-05 P6 A6304 | TE Connectivity | 983-0S 10-05 P6 A6304 | 0 | |||
| YHVA630-2PHM-4MM-A | TE Connectivity | HVA630-2PHM,4SQMM,KEY A RoHS : Compliant |
| 0 | ||
| 983-0YE 10-05 EN A6300 | TE Connectivity | 983-0YE 10-05 EN A6300 | 0 | |||
| 983-1Y 08-03 PN-A6309 | TE Connectivity | 983-1Y 08-03 PN-A6309 | 0 | |||
| YHVA630-4PHM-4MM-A | TE Connectivity | HVA630-5PHM,4X4SQMM,KEY A RoHS : Compliant |
| 0 | ||
| YHVA630-4PHM-4MM-A | TE Connectivity | HVA630-5PHM,4X4SQMM,KEY A RoHS : Compliant | 0 | |||
| 983-1YE 10-05 PN-A6309 | TE Connectivity | 983-1YE 10-05 PN-A6309 | 0 | |||
| YHVA630-5PHM-6MM-A | TE Connectivity | HVA630-5PHM,5X6SQMM,KEY A RoHS : Compliant | 0 | |||
| AKA630N00410140000 | TE Connectivity | 623 EXTENSION, SPEEDTEC | 0 | |||
| 983-7Y 20-04 PT-A6302 | TE Connectivity | 983-7Y 20-04 PT-A6302 983-7Y 20-04 PT-A6 |
| 0 | ||
| 983-1YE 08-03 PN-A6309 | TE Connectivity | 983-1YE 08-03 PN-A6309 | 0 | |||
| YHVA630-3PHM-4MM-A | TE Connectivity | HVA630-5PHM,3X4SQMM,KEY A RoHS : Compliant |
| 0 | ||
| YHVA630-3PHM-4MM-A | TE Connectivity | HVA630-5PHM,3X4SQMM,KEY A RoHS : Compliant | 0 | |||
| 983-1YE 08-03 E6 A6300 | TE Connectivity | 983-1YE 08-03 E6 A6300 | 0 | |||
![]() PEI Genesis | SA630 | SOURIAU-SUNBANK |
| 0 | ||
| BT-A-6300 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| S5237A6-30 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | MA-141-004-213-A6300 | AirBorn a molex company | Micro-Strip Cable Connector RoHS : Compliant |
| 240 | |
| YHVA630-2PHM-4MM-A | TE Connectivity | Connectors RoHS : Compliant |
| 35 | ||
| MA-281-020-435-A6300 | AirBorn a molex company | Micro-Strip Cable Connector RoHS : Not Compliant |
| 31 | ||
| MA-281-006-435-A6300 | AirBorn a molex company | Micro-Strip Cable Connector |
| 16 | ||
| MA-281-014-435-A6300 | AirBorn a molex company | Micro-Strip Cable Connector RoHS : Not Compliant |
| 7 | ||
| YHVA630-2PHM-6MM-A | TE Connectivity | TE COMPONENT YHVA630-2PHM-6MM-A RoHS : Compliant |
| 6 | ||
![]() PUI | TCA-630MA | 3,845 | ||||
![]() Richardson RFPD | EMZA630ARA470MHA0G | United Chemi-Con Inc | Cap Aluminum Lytic 47uF 63V 20% (8 X 10mm) SMD 0.2 RoHS : Compliant | 0 | ||
| EKYA630ELL471MK25S | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitor RoHS : Compliant | 0 | |||
| EGPA630ELL471ML20S | United Chemi-Con Inc | Cap Aluminum Lytic 470uF 63V 20% (16 X 20mm) Radia RoHS : Compliant | 0 | |||
| EGPA630ELL182MM40S | United Chemi-Con Inc | Cap Aluminum Lytic 1800uF 63V 20% (18 X 40mm) Radi RoHS : Compliant | 0 | |||
| EGPA630ELL681MM20S | United Chemi-Con Inc | Cap Aluminum Lytic 680uF 63V 20% (18 X 20mm) Radia RoHS : Compliant | 0 | |||
| EKYA630ELL152MLP1S | United Chemi-Con Inc | Cap Aluminum Lytic 1500uF 63V 20% (16 X 35.5mm) Ra RoHS : Compliant | 0 | |||
| EGPA630ELL821ML30S | United Chemi-Con Inc | Cap Aluminum Lytic 820uF 63V 20% (16 X 30mm) Radia RoHS : Compliant | 0 | |||
| EKYA630ELL122MLN3S | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitor RoHS : Compliant | 0 | |||
| EKYA630ELL121MJ16S | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitors RoHS : Compliant | 0 | |||
| EKYA630ELL102ML25S | United Chemi-Con Inc | Cap Aluminum Lytic 1000uF 63V 20% (16 X 25mm) Radi RoHS : Compliant | 0 | |||
| EKYA630ELL101MJC5S | United Chemi-Con Inc | Miniature Aluminum Electrolytic Capacitor RoHS : Compliant | 0 | |||
| EGPA630ELL102ML35S | United Chemi-Con Inc | Cap Aluminum Lytic 1000uF 63V 20% (16 X 35mm) Radi RoHS : Compliant | 0 | |||
| EGPA630ELL122MM30S | United Chemi-Con Inc | Cap Aluminum Lytic 1200uF 63V 20% (18 X 30mm) Radi RoHS : Compliant | 0 | |||
| EGPA630ELL152MM35S | United Chemi-Con Inc | Cap Aluminum Lytic 1500uF 63V 20% (18 X 35mm) Radi RoHS : Compliant | 0 | |||
| EGPA630ELL681ML25S | United Chemi-Con Inc | Cap Aluminum Lytic 680uF 63V 20% (16 X 25mm) Radia RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | EMZA630ADA101MJA0G | Chemi-Con | INSTOCK RoHS : Compliant | 7,000 | ||
| EMZA630A##101MJA0G | United Chemi-Con Inc | INSTOCK | 1,484 | |||
| EMZA630A##301MKG5S | United Chemi-Con Inc | INSTOCK | 1,007 | |||
| AJ210A-A630-200 | INSTOCK | 844 | ||||
| L5A6305003PD8472FAA | INSTOCK | 236 | ||||
![]() Avnet Abacus | B65686A630A27 | TDK Corporation | Ferrite Core PM Core 74mm 59mm Power TransformerEnergy Storage Choke (Alt: B65686A0630A027) RoHS : Compliant | 0 | ||
| B65646A630A27 | TDK Corporation | Ferrite Core PM Core 50mm 39mm Power TransformerEnergy Storage Choke (Alt: B65646A0630A027) RoHS : Compliant | 0 | |||
| B65733A6300L27 | TDK Corporation | (Alt: B65733A6300L027) RoHS : Compliant | 0 | |||
| B85121A2475A630 | TDK Corporation | Cap Feed Through 47uF 600V PP 20 Stud Mount (Alt: B85121A2475A630) RoHS : Compliant | 0 | |||
| SCA630-EDCV1B-6 | Murata Manufacturing Co Ltd | (Alt: SCA630-EDCV1B-6) RoHS : Compliant | 0 | |||
| B85321A2945A630 | TDK Corporation | Power Line Filter 50Hz60Hz 63A 250VAC350VDC Threaded Stud Wall Mount (Alt: B85321A2945A630) RoHS : Compliant | 0 | |||
| SF-1206SA630W-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206SA630W-2) RoHS : Compliant | 0 | |||
| SF-2410FPA630W-2 | Bourns Inc | - Tape and Reel (Alt: SF-2410FPA630W-2) RoHS : Compliant | 0 | |||
| SCA630-EDCV1B-004 | Murata Manufacturing Co Ltd | MEMS Accelerometer Analogue X 133g 475 V 525 V SMD (Alt: SCA630-EDCV1B-004) RoHS : Compliant | 0 | |||
| YHVA630-2PHM-6MM-A | TE Connectivity | (Alt: YHVA630-2PHM-6MM-A) RoHS : Compliant | 0 | |||
| YHVA630-2PHM-4MM-A | TE Connectivity | Connector Housing Sealed Plug 2Position 94mm Straight Cable Mount Carton (Alt: YHVA630-2PHM-4MM-A) RoHS : Compliant | 0 | |||
| YHVA630-2PHM-4MM-A | TE Connectivity | Connector Housing Sealed Plug 2Position 94mm Straight Cable Mount Carton (Alt: YHVA630-2PHM-4MM-A) RoHS : Compliant | 0 | |||
| YHVA630-4PHM-4MM-A | TE Connectivity | Connector Housing Sealed Plug 4Position 63mm Straight Cable Mount Carton (Alt: YHVA630-4PHM-4MM-A) RoHS : Compliant | 0 | |||
| YHVA630-5PHM-6MM-A | TE Connectivity | Connector Housing Sealed Plug 5Position 63mm Straight Cable Mount Carton (Alt: YHVA630-5PHM-6MM-A) RoHS : Compliant | 0 | |||
| YHVA630-5PHM-6MM-A | TE Connectivity | Connector Housing Sealed Plug 5Position 63mm Straight Cable Mount Carton (Alt: YHVA630-5PHM-6MM-A) RoHS : Compliant | 0 | |||
![]() Avnet Silica | XC6114A630MR | Torex Semiconductor LTD | (Alt: XC6114A630MR) RoHS : Compliant | 0 | ||
| XC6114A630MR-G | Torex Semiconductor LTD | Voltage Detector 1 Monitor 3 V PushPull SOT255 40 C to 85 C 16 V to 5 V Supply (Alt: XC6114A630MR-G) RoHS : Not Compliant | 0 | |||
![]() DB Roberts | LCBSA-6-3-01 | Essentra Components | CB SptDual LckNatural3/16 in Spc CB Spt Dual Lock Natural | 0 | ||
![]() Master Electronics | EGPA630ELL681MM20S | United Chemi-Con Inc | The EGPA630ELL681MM20S is a miniature aluminum electrolytic capacitor featuring a 680µF capacitance and a 63Vdc rating for high-reliability automotive applications. RoHS : Compliant |
| 2,950 | |
| EGPA630ELL471ML20S | United Chemi-Con Inc | Cap Aluminum Lytic 470uF 63V 20% (16 X 20mm) Radial 7.5mm 0.085 Ohm 1790mA 3000h 125A°C Automotive Bulk RoHS : Compliant |
| 1,033 | ||
| EKYA630ELL152MLP1S | United Chemi-Con Inc | Cap Aluminum Lytic 1500uF 63V 20% (16 X 35.5mm) Radial 7.5mm 2900mA 10000h 105C Bulk RoHS : Compliant |
| 1,000 | ||
| EKYA630ELL471MK25S | United Chemi-Con Inc | Aluminum Electrolytic Capacitor Polarized Aluminum (wet) 63V 20% +Tol 20% -Tol 470uF Through Hole Mount RoHS : Compliant |
| 864 | ||
| EGPA630ELL182MM40S | United Chemi-Con Inc | The EGPA630ELL182MM40S is a miniature aluminum electrolytic capacitor with a capacitance of 1800µF and a rated voltage of 63Vdc. RoHS : Compliant |
| 750 | ||
| EMZA630ARA681MLN0S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| YHVA630-2PHI-HDR-F | TE Connectivity | HVA630 2P (1-2141272-6 ) RoHS : Compliant |
| 0 | ||
| EMZA630ARA4R7ME61G | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| SA2-A-6300-CLT-STD | Bourns Inc | HV GDT AECQ 6300V RoHS : Compliant |
| 0 | ||
| EMZA630ARA241MKE0S | United Chemi-Con Inc | RoHS : Compliant |
| 0 | ||
| DSA6301JI2CB-033.3333VAO | Microchip Technology Inc | MEMS OSC AUTO LVCMOS 33.3333MHz 25ppm 1.8-3.3V -40 to RoHS : Compliant |
| 0 | ||
| YHVA630-2PHM-4MM-A | TE Connectivity | HVA630-2phm 4sqmm Key A RoHS : Compliant |
| 0 | ||
| DSA6301HA1AB-027.0000TVAO | Microchip Technology Inc | MEMS OSC AUTO LVCMOS 27MHz 50PPM 1.8-3.3V -40 to 125C RoHS : Compliant |
| 0 | ||
| DSA6301HA1AB-027.0000VAO | Microchip Technology Inc | MEMS OSC AUTO LVCMOS 27MHz 50PPM 1.8-3.3V -40 to 125C RoHS : Compliant |
| 0 | ||
| SF-2410FPA630W-2 | Bourns Inc | SMD Fast Acting Fuse - 6.3A - 2410 - 125VDC - Automotive Grade - -55°C to 125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
![]() Neutron USA | F204A-63/0.03 110V | ABB Low Voltage Products and Systems | Circuit Breakers F204 63A 30MA 110V PB TEST VOLTAGE |
| 7 | |
| ACE-A630B-RS-R10 | iEi Integration Corporation | 1U flex ATX 300W Power Supply;90~264VAC;ERP;CCL;RoHS |
| 2 | ||
| GDA-630MA | Eaton Corporation | Fuse;Fast-Acting;Cylinder;5x20mm;Ceramic/Ni-Plated Brass;630mA;250VAC;Cartridge RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE15A63018 | Pasternack Enterprises |
| 1,391 | ||
| PE15A63015 | Pasternack Enterprises |
| 8 | |||
| PE15A63016 | Pasternack Enterprises |
| 3 | |||
| PE15A63022 | Pasternack Enterprises | Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Gain, Min: 33 dB, Gain, Typical: 36 dB, Noise Figure, Max: 2.5 dB, 3rd Intercept Point: 36 dB, Connector Series: SMA. 36 dB Gain, 21 dBm P1dB, 0.01 GHz to 3 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/240VAC, 2.5 dB Noise Figure, SMA. The PE15A63022 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The PE15A63022 broadband amplifier has 1.7:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 2.5 dB with a typical gain of 36 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/240 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 33 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63022 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 21 dB of typical 1dB compression point and 1.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -55 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 2 | ||
| PE15A63031 | Pasternack Enterprises | Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 500 MHz, Frequency, Max: 40 GHz, Gain, Min: 37 dB, Gain, Typical: 44 dB, 3rd Intercept Point: 25 dB, Connector Series: 2.92mm. 44 dB Gain, 20 dBm P1dB, 0.5 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 4.5 dB Noise Figure, 2.92mm. The PE15A63031 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 500 MHz and maximum frequency of 40 GHz. The PE15A63031 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 44 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 3 dB typical gain flatness along with 37 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63031 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 4.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 2 | ||
| PE15A63030 | Pasternack Enterprises | Key Specifications, Power Output: 28 dBm Psat, Frequency, Min: 500 MHz, Frequency, Max: 4 GHz, Gain, Min: 40 dB, Gain, Typical: 45 dB, Noise Figure, Max: 1.5 dB, 3rd Intercept Point: 32 dB, RF Input VSWR Max: 3:1, RF Output VSWR Max: 2.5:1, Connector Series: SMA. 45 dB Gain, 26 dBm P1dB, 0.5 GHz to 4 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 0.8 dB Noise Figure, SMA. The PE15A63030 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 500 MHz and maximum frequency of 4 GHz. The PE15A63030 broadband amplifier has 2.1:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 1.5 dB with a typical gain of 45 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 40 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63030 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 26 dB of typical 1dB compression point and 0.8 dBm of typical RF input power. The AC powered broadband amplifier is rated for 28 dBm of typical saturated output power along with typical reverse isolation of -55 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 2 | ||
| PE15A63027 | Pasternack Enterprises | Key Specifications, Power Output: 27 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 6 GHz, Gain, Min: 28 dB, Gain, Typical: 30 dB, Noise Figure, Max: 4.5 dB, 3rd Intercept Point: 36 dB, RF Input VSWR Max: 3:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 30 dB Gain, 25 dBm P1dB, 0.1 GHz to 6 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, SMA. The PE15A63027 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 6 GHz. The PE15A63027 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4.5 dB with a typical gain of 30 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 28 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63027 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 25 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 27 dBm of typical saturated output power along with typical reverse isolation of -60 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 2 | ||
| PE15A63025 | Pasternack Enterprises | Key Specifications, Power Output: 1 Watt (30 dBm) Psat, Frequency, Min: 10 MHz, Frequency, Max: 30 GHz, Gain, Min: 32 dB, Gain, Typical: 38 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 35 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2.2:1, Connector Series: 2.92mm. 38 dB Gain, 27 dBm P1dB, 0.01 GHz to 30 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, 2.92mm. The PE15A63025 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 30 GHz. The PE15A63025 broadband amplifier has 1.4:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 38 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 32 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63025 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 27 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 30 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 2 | ||
| PE15A63023 | Pasternack Enterprises | Key Specifications, Power Output: 18 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3.5 GHz, Gain, Min: 58 dB, Gain, Typical: 62 dB, Noise Figure, Max: 1.5 dB, 3rd Intercept Point: 26 dB, Connector Series: SMA. 62 dB Gain, 17 dBm P1dB, 0.01 GHz to 3.5 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 1.3 dB Noise Figure, SMA. The PE15A63023 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3.5 GHz. The PE15A63023 broadband amplifier has 2.2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 1.5 dB with a typical gain of 62 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 58 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63023 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 17 dB of typical 1dB compression point and 1.3 dBm of typical RF input power. The AC powered broadband amplifier is rated for 18 dBm of typical saturated output power along with typical reverse isolation of -75 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 1 | ||
| PE15A63013 | Pasternack Enterprises |
| 1 | |||
| PE15A63024 | Pasternack Enterprises | Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 20 GHz, Gain, Min: 26 dB, Gain, Typical: 29 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 29 dB, Connector Series: SMA. 29 dB Gain, 22 dBm P1dB, 0.01 GHz to 20 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.5 dB Noise Figure, SMA. The PE15A63024 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 20 GHz. The PE15A63024 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 29 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 26 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63024 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 22 dB of typical 1dB compression point and 3.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -65 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 1 | ||
| PE15A63000 | Pasternack Enterprises | Key Specifications, Gain: 30 dB, Power Output: 17 dBm P1dB, Frequency, Min: 10 MHz, Frequency, Max: 1 GHz, Noise Figure, Max: 3 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 130 mA, Connector Series: SMA. 1 dB NF Input Protected Low Noise Amplifier, Operating from 10 MHz to 1 GHz with 30 dB Gain, 17 dBm P1dB and SMA. PE15A63000 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 10 MHz and maximum frequency of 1 GHz. The significantly low noise figure of this radio frequency amplifier is 3 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63000 is rated at 15 Volts DC maximum and 130 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
| PE15A63005 | Pasternack Enterprises | Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63005 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63005 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
| PE15A63003 | Pasternack Enterprises | Key Specifications, Gain: 29 dB, Power Output: 23 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 190 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 29 dB Gain, 23 dBm P1dB and SMA. PE15A63003 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 29 dB. input protected LNA amplifier PE15A63003 is rated at 15 Volts DC maximum and 190 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 0 | ||
| PE15A63029 | Pasternack Enterprises | Key Specifications, Power Output: 20 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 50 GHz, Gain, Min: 35 dB, Gain, Typical: 42 dB, 3rd Intercept Point: 28 dB, Connector Series: 2.4mm. 42 dB Gain, 18 dBm P1dB, 0.1 GHz to 50 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/240VAC, 5 dB Noise Figure, 2.4mm. The PE15A63029 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.4mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.4mm gender configuration for input and output ports. This 2.4mm broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 50 GHz. The PE15A63029 broadband amplifier has 2.5:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 42 dB. This 2.4mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/240 VAC voltage. This RF low noise amplifier has a 3.5 dB typical gain flatness along with 35 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63029 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 18 dB of typical 1dB compression point and 5.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 20 dBm of typical saturated output power along with typical reverse isolation of -60 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement. |
| 0 | ||
![]() Sager | YHVA630-2PHM-6MM-A | TE Connectivity | Automotive Connectors HVA630-2phm 6sqmm,Key A KIT RoHS : Compliant |
| 0 | |
| YHVA630-2PHM-4MM-A | TE Connectivity | Automotive Connectors HVA630-2phm 4sqmm,Key A KIT RoHS : Compliant |
| 0 | ||
| LCMA630-12-1 | Panduit Corp | Terminals Copper Compression Metric Lug, 1 Hole, 6 | 0 | |||
| LCMA630-20-1 | Panduit Corp | Terminals Copper Comp Metric Lug, 1 Hole, 6 RoHS : Compliant | 0 | |||
| VGA630BK | Hubbell Incorporated | Hubbell | 0 | |||
| BK1/GDA-630MA | Eaton Bussmann | Cartridge Fuses SMALL DIMENSION FUSE | 0 | |||
| LYMA-63000-730 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| YHVA630-4PHM-4MM-A | TE Connectivity | Automotive Connectors HVA630-5phm,4x4sqmm,Key A RoHS : Compliant |
| 0 | ||
| YHVA630-5PHM-6MM-A | TE Connectivity | Automotive Connectors HVA630-5phm,5x6sqmm,Key A RoHS : Compliant |
| 0 | ||
| LCMA630-16-1 | Panduit Corp | Terminals Copper Comp Metric Lug, 1 Hole, 6 RoHS : Compliant |
| 0 | ||
| LYMA-63000-731PASM | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| LYMA-63000-721PASM | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| LYMA-63000-720PASM | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| LYMA-63000-720 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
| A630-0338 | Merkle-Korff Industries | Merkle-Korff | 0 | |||
![]() TE Connectivity | YHVA630-5PHM-6MM-A | TE Connectivity | HVA630-5phm,5x6sqmm,Key A Cable Assembly (End A): HVA630 Plug Operating Voltage: 850 VDC Cable Assembly Configuration: Single Ended Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F HVA630 Plug 850 VDC | Electric & Hybrid & Fuel Cell Cable Assembly | Part Number: YHVA630-5PHM-6MM-A | Internal Number: YHVA630-5PHM-6MM-A | TE Connectivity RoHS : Compliant |
| 5 | |
![]() Vyrian | EGPA630ELL821ML30S | Nippon Chemi-con | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 820uF, Through Hole Mount | 18,194 | ||
| EKYA630ELL102ML25S | Nippon Chemi-con | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount | 13,825 | |||
| TPA6304Q1EVM | Texas Instruments | 9,159 | ||||
TPA6304QDDVRQ1![]() | Texas Instruments | 45W, 4 Channel(s), 1 Func, PDSO44 RoHS : Compliant | 8,563 | |||
TPS7A6301QPWPRQ1![]() | Texas Instruments | Adjustable Positive LDO Regulator, 2.5V Min, 7V Max, 0.5V Dropout, CMOS, PDSO14 RoHS : Compliant | 7,462 | |||
PTPA6304QDDVRQ1![]() | Texas Instruments | 45W, 4 Channel(s), 1 Func, PDSO44 | 6,371 | |||
| TPS7A6301EVM | Texas Instruments | 4,512 | ||||
| EMVA630ADA220MF80G | United Chemi-Con Inc | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 2626 | 792 | |||
| EMVA630ADA470MHA0G | United Chemi-Con Inc | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333 | 692 | |||
| EGVA630ELL152MMP1H | Nippon Chemi-con | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 1500uF, Through Hole Mount | 585 | |||
| EGVA630ELL122MM30H | Nippon Chemi-con | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 1200uF, Through Hole Mount | 408 | |||
| GDA-630MA | Cooper Industries | Electric Fuse, Fast Blow, 0.63A, 250VAC, 1500A (IR), Inline/holder, 5x20mm RoHS : Not Compliant | 229 | |||
![]() Win Source Electronics | EMZA630ADA101MJA0G | United Chemi-Con Inc | CAP ALUM 100UF 20% 63V SMD |
| 1,770 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |