| Os motores de busca de Datasheet de Componentes eletrônicos |
|
904L-S08-R Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Coilcraft Direct | 4308RV-904XJLD | Coilcraft Inc | RFID transponder coil, SMT, RoHS RoHS : Compliant |
| 2,376 | |
| 5315TC-904XGLD | Coilcraft Inc | RFID transponder coil, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 4308RV-904XGLD | Coilcraft Inc | RFID transponder coil, SMT, RoHS RoHS : Compliant |
| 0 | ||
| SER1390-473MLD | Coilcraft Inc | Power inductor, high current, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Rutronik | MMBT3904![]() | Diotec Semiconductor AG | NPN TRANSISTOR 40V 0,2A SOT23 RoHS : Compliant |
| 75,000 | |
UMT3904T106![]() | ROHM Semiconductor | NPN TRANSISTOR 0,2A 40V UMT3 RoHS : Compliant |
| 45,000 | ||
| LMBT3904DW1T1G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,2A 60V SC88 RoHS : Compliant |
| 30,000 | ||
| LMBT3904N3T5G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,2A 60V SOT883 RoHS : Compliant |
| 30,000 | ||
| LMBT3904TT1G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,2A 60V SC89 RoHS : Compliant |
| 20,000 | ||
| LMBT3904WT1G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,2A 60V SC70 RoHS : Compliant |
| 15,000 | ||
| S-LMBT3904LT1G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,6A 40V RoHS : Compliant |
| 15,000 | ||
| 2N3904BK | Diotec Semiconductor AG | NPN TRANSISTOR 40V 0,2A TO-92 RoHS : Compliant |
| 10,000 | ||
| NJM2904CG-TE2 | Nisshinbo Micro Devices | 2xOP 1,1MHz 0,6V/µs SO8 _SMD RoHS : Compliant |
| 7,500 | ||
| SMBT3904PNH6327XTSA1 | Infineon Technologies AG | NPN/PNP DUAL-TRANS.40V SOT363 RoHS : Compliant |
| 6,000 | ||
| BSZ0904NSIATMA1 | Infineon Technologies AG | N-CH 30V 75A 3.3mOhm TSDSON-8 RoHS : Compliant |
| 5,000 | ||
| 3-119-048 | Schurter Electronic Components | LINE OUTLET SNAP IN 15A 125VAC RoHS : Compliant |
| 1,200 | ||
| 90438-AS//P3 | PRECI-DIP SSA | 01P SLC Contact REV.P3 RoHS : Compliant |
| 560 | ||
| LM2904EYF-CE2 | ROHM Semiconductor | Operational Amplifier RoHS : Compliant |
| 20 | ||
| MMBT3904-7-F | Diodes Incorporated | NPN TRANSISTOR 40V 0,2A SOT23 RoHS : Compliant |
| 10 | ||
![]() Avnet Silica | LM2904YPT![]() | STMicroelectronics | OP Amp Dual GP 15V30V 8Pin TSSOP TR (Alt: LM2904YPT) RoHS : Compliant | 452,000 | ||
LM2904DR2G![]() | onsemi | Operational Amplifier Single Supply Dual ONSSPCAPLFRS (Alt: LM2904DR2G) RoHS : Compliant | 367,500 | |||
LM2904PT![]() | STMicroelectronics | Operational Amplifier Dual 2 Channels 11 MHz 06 Vs 3V to 30V TSSOP 8 Pins (Alt: LM2904PT) RoHS : Compliant | 216,000 | |||
LM2904WYPT![]() | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V TSSOP 8 Pins (Alt: LM2904WYPT) RoHS : Compliant | 92,000 | |||
PMBT3904,235![]() | Nexperia | Single Bipolar Transistor NPN 40 V 200 mA 250 mW SOT23 3 Pins Surface Mount (Alt: PMBT3904,235) RoHS : Compliant | 60,000 | |||
PMBT3904VS,115![]() | Nexperia | Trans GP BJT NPN 40V 02A 6Pin SOT666 TR (Alt: PMBT3904VS,115) RoHS : Compliant | 60,000 | |||
| MPQ8904DD-AEC1-LF-Z | Monolithic Power Systems | (Alt: MPQ8904DD-AEC1-LF-Z) RoHS : Compliant | 45,000 | |||
LM2904WYDT![]() | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V SOIC 8 Pins (Alt: LM2904WYDT) RoHS : Compliant | 40,000 | |||
PMBS3904,215![]() | Nexperia | Trans GP BJT NPN 40V 01A 3Pin TO236AB TR (Alt: PMBS3904,215) RoHS : Compliant | 24,000 | |||
| LM2904Q2T | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V DFN 8 Pins (Alt: LM2904Q2T) RoHS : Compliant | 21,000 | |||
| LM2904AWYPT | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V TSSOP 8 Pins (Alt: LM2904AWYPT) RoHS : Compliant | 16,000 | |||
| NCV890430MW50TXG | onsemi | Automotive 06 A 2 MHz 100 Duty Cycle StepDown Synchronous Regulator NCV890430 50 V Version (Alt: NCV890430MW50TXG) RoHS : Compliant | 15,000 | |||
| NST3904DP6T5G | onsemi | Dual NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: NST3904DP6T5G) RoHS : Compliant | 8,000 | |||
MBT3904DW1T1G![]() | onsemi | Bipolar Transistor Array General Purpose Dual NPN 40 V 200 mA 150 mW (Alt: MBT3904DW1T1G) RoHS : Compliant | 6,000 | |||
LM2904VDR2G![]() | onsemi | Operational Amplifier Single Supply Dual ONSSPCAPLFRS (Alt: LM2904VDR2G) RoHS : Compliant | 2,500 | |||
![]() Braemac Americas-Symmetry | AMER90-42200Z | Aimtec | RoHS : Compliant |
| 0 | |
| SLC9048-DC | Lantronix Inc | SLC9048-DC Console Server |
| 0 | ||
| ME910G1WW08R090400 | Telit | ME910G1-WW AT&T/VzW/TLS 37.00.419 HW 1.0 |
| 0 | ||
| SLC9048 | Lantronix Inc | SLC9048 Console Server |
| 0 | ||
APAKN0904-S1575-T![]() | Abracon Corporation | RF ANT COMPACT GPS PATCH RoHS : Compliant |
| 0 | ||
AX7DAF1-904.0000T![]() | Abracon Corporation | XTAL OSC XO 904.0000MHZ LVDS SMD RoHS : Compliant |
| 0 | ||
| SLC9048-NA | Lantronix Inc | SLC9048-NA Console Server |
| 0 | ||
![]() Chip-Germany GmbH | MAX9041AEUT![]() | Maxim Integrated Products | RoHS : Not Compliant | 15 | ||
| M209990446 | Harwin | 11 | ||||
| LM2904M-NOPB | National Semiconductor Corporation | 7 | ||||
![]() DB Roberts | 17W09904 | Essentra Components | FLAT WASHER, .550 ID, 1.030 OD | 0 | ||
| MF-90-400-10 | Southco | 0 | ||||
| 71210-15904 | Avdel | NG2 BS TL - NTIP PRT | 0 | |||
| E3-129-0459 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 1904-2520-S-12 | RAF Electronic Hardware | 0 | ||||
| 8904 | Heyco | CW 187 PE UV BLACK (100' ROLL) RoHS : Compliant | 0 | |||
| 9046H | Heyco | PR 142-083 HR TAN | 0 | |||
| 3BT-F9040-00 | Acumnet / Camcar | 8-16 X 3/4 TXP FLAT HD | 0 | |||
| M2190-4007-SS-20 | RAF Electronic Hardware | 0 | ||||
| R904-1 | Essentra Components | SpacerRoundNatural1/16 in Spc Spacer Round Natural | 0 | |||
| R4-90-491-10 | Southco | 0 | ||||
| AES9043 | PennEngineering (PEM) | AES9043 | 0 | |||
| 9040 | Heyco | PR 122-256 BLACK | 0 | |||
| 9040F | Heyco | PR 122-256 V-0 BLACK | 0 | |||
| 9048H | Heyco | PR 142-106 HR TAN | 0 | |||
![]() EBV Elektronik | MMBT3904LT1G![]() | onsemi | (Alt: MMBT3904LT1G) RoHS : Compliant | 1,374,000 | ||
LM2904DR2G![]() | onsemi | Operational Amplifier Single Supply Dual ONSSPCAPLFRS (Alt: LM2904DR2G) RoHS : Compliant | 1,370,000 | |||
| 2N3904TF | onsemi | Bipolar BJT Single Transistor NPN 40 V 200 mA 625 mW TO92 Through Hole (Alt: 2N3904TF) RoHS : Compliant | 18,000 | |||
LM2904WYDT![]() | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V SOIC 8 Pins (Alt: LM2904WYDT) RoHS : Compliant | 12,500 | |||
| SMBT3904PNH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPNPNP 40V 02A 6Pin SOT363 TR (Alt: SP000749584) RoHS : Compliant | 9,000 | |||
LM2904VDR2G![]() | onsemi | Operational Amplifier Single Supply Dual ONSSPCAPLFRS (Alt: LM2904VDR2G) RoHS : Compliant | 7,500 | |||
| SMBT3904SH6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 40V 02A 6Pin SOT363 TR (Alt: SP000749590) RoHS : Compliant | 6,000 | |||
LM2904PT![]() | STMicroelectronics | Operational Amplifier Dual 2 Channels 11 MHz 06 Vs 3V to 30V TSSOP 8 Pins (Alt: LM2904PT) RoHS : Compliant | 4,000 | |||
LM2904AYPT![]() | STMicroelectronics | Operational Amplifier 2 Channels 11 MHz 06 Vs 3V to 30V TSSOP 8 Pins (Alt: LM2904AYPT) RoHS : Compliant | 4,000 | |||
| TLP290-4(TP,E(T | Toshiba America Electronic Components | Optocoupler ACIN 4CH ACOUT 16Pin SOIC TR (Alt: TLP290-4(TP,E(T) RoHS : Compliant | 4,000 | |||
| TLP290-4(GB,E(T | Toshiba America Electronic Components | Optocoupler 4CH DCOUT 2500Vrms 16Pin SOIC (Alt: TLP290-4(GB,E(T) RoHS : Compliant | 1,100 | |||
| HEDS-8904 | Broadcom Limited | Locking Connector HED5500 HEDS5600 HEDS5700 Series Encoders (Alt: HEDS-8904) RoHS : Compliant | 377 | |||
| FA11904_TINA3-WWW | LEDIL | Lens With White Color And Round Style (Alt: FA11904_TINA3-WWW) RoHS : Compliant | 288 | |||
PIC12CE519-04/SM![]() | Microchip Technology Inc | MCU 8bit PIC12 PIC RISC 15KB EPROM 33V5V 8Pin SOIJ Tube (Alt: PIC12CE519-04/SM) RoHS : Compliant | 270 | |||
| BCM95719A1904AC | Broadcom Limited | (Alt: BCM95719A1904AC) RoHS : Compliant | 30 | |||
![]() FDH Electronics | EE22759/11-24-9045 | Harbour Industries | Wire and Cable | 12,546 | ||
| 1309048-001 | Meyer Wire & Cable Company | Wire and Cable | 858 | |||
| 385HC006-0904L | Glenair Inc | Connector Acc |
| 23 | ||
| S2904S0904AIS15B-000 | SOURIAU-SUNBANK | Connector Acc |
| 4 | ||
| 319HS001M1904-8T | Glenair Inc | Connector |
| 0 | ||
| 360HS001B0904H3 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 360HS001M0904H4 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380HA103NF0904H | Glenair Inc | Connector |
| 0 | ||
| 380HS001M0904H4 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380HS103M0904A4 | Glenair Inc | Connector |
| 0 | ||
| 390HS009NF0904C3 | Glenair Inc | Connector |
| 0 | ||
| 311HA001NF0904E | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 311HS001NF1904 | Glenair Inc | Placeholder RoHS : Not Compliant | 0 | |||
| 440HJ072M0904 | Glenair Inc | Backshells & Ac | 0 | |||
| S3154-0904A-1.5-12 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
![]() Pasternack Enterprises US | PE3W08904-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female Bulkhead to N Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly TNC female bulkhead to N male cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 12 inch length using RG142 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and type N cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W08904-12 can also be known as a TNC jack to N type plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W08904-12 is built with RG142 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency TNC female bulkhead to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08904-12 can also be used in the other direction and will be type N male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 12 inch length using RG142 coax. |
| 924 | |
| PE3C5990-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated SMA Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-200-FR Coax With Times Microwave Components., Radio frequency assembly fire rated SMA male to SMA male low loss cable 48 inch length using LMR-200-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated SMA male to SMA male low loss cable 48 inch length using LMR-200-FR coax with Times Microwave components, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C5990-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5990-48 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated SMA male to SMA male low loss cable 48 inch length using LMR-200-FR coax with Times Microwave components. |
| 251 | ||
| PE3904-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 72 inches. TNC Male to BNC Male Cable 72 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly TNC male to BNC male cable 72 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 72 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE3904-72, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3904-72 is built with RG55 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3904-72 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 72 inch length using 53 Ohm RG55 coax. |
| 122 | ||
| PE33690-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMC Plug to SMC Jack Bulkhead Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly SMC plug to SMC jack bulkhead cable 48 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC jack bulkhead cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC bulkhead cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE33690-48, can also be known as a SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE33690-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33690-48 can also be used in the other direction and will be SMC jack bulkhead to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC jack bulkhead cable 48 inch length using RG316 coax. |
| 0 | ||
| PE3M0290-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to SMA Male Cable 48 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0290-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0290-48 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0290-48 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMZ socket to SMA male cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0290-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1904 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MMCX Plug to BNC Male Cable Using RG316-DS Coax. PE3C1904 is a MMCX plug to BNC male cable using RG316-DS coax. This Pasternack MMCX plug to BNC male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MMCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1904 MMCX plug to BNC male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3C9041 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to 4.3-10 Female 4 Hole Flange Cable Using PE-SR402AL Coax. PE3C9041 is a 4.3-10 male to 4.3-10 female 4 hole flange cable using PE-SR402AL coax. This Pasternack 4.3-10 male to 4.3-10 female 4 hole flange cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to female 4.3-10 4 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9041 4.3-10 male to 4.3-10 female 4 hole flange cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W07349/PH90-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female Bulkhead to Push-On SMP Female Right Angle Low Loss Cable Using LMR-100 Coax with 90 Deg. Clock in 48 Inch., Radio frequency assembly SMA female bulkhead to push-on SMP female right angle low loss cable using LMR-100 coax with 90 deg. clock in 48 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to push-on SMP female right angle low loss cable using LMR-100 coax with 90 deg. clock in 48 inch, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W07349/PH90-48, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W07349/PH90-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07349/PH90-48 can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to push-on SMP female right angle low loss cable using LMR-100 coax with 90 deg. clock in 48 inch. |
| 0 | ||
| PE3W09045 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Female to SMA Male Cable Using PE-SR405AL Coax. PE3W09045 is a 2.4mm female to SMA male cable using PE-SR405AL coax. This Pasternack 2.4mm female to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 2.4mm to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09045 2.4mm female to SMA male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W09045LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.4mm Female to SMA Male Cable Using PE-SR405AL Coax with HeatShrink, LF Solder. PE3W09045LF/HS is a 2.4mm female to SMA male cable using PE-SR405AL coax. This Pasternack 2.4mm female to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 2.4mm to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09045LF/HS 2.4mm female to SMA male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W13904 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-240-FR Coax. PE3W13904 is a BNC male to BNC male cable using LMR-240-FR coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13904 BNC male to BNC male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4904-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to Snap-On BMA Jack Cable 36 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and BMA cable connection on the other. Our BMA to BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4904-36, can also be known as a BMA male to BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4904-36 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA plug bulkhead to BMA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4904-36 can also be used in the other direction and will be BMA jack to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to snap-on BMA jack cable 36 inch length using PE-SR402FLJ coax. |
| 0 | ||
| PE3C9040 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to Push-On 4.3-10 Male Right Angle Cable Using PE-SR402AL Coax. PE3C9040 is a 4.3-10 male to 4.3-10 male right angle cable using PE-SR402AL coax. This Pasternack 4.3-10 male to 4.3-10 male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. 4.3-10 to 4.3-10 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 to male 4.3-10 right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9040 4.3-10 male to 4.3-10 male right angle cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3C5904 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMC Plug to SMC Jack Bulkhead Cable Using RG223 Coax., Radio frequency assembly SMC plug to SMC jack bulkhead cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC jack bulkhead cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC bulkhead cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE3C5904, can also be known as a SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE3C5904 is built with RG223 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMC plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5904 can also be used in the other direction and will be SMC jack bulkhead to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC jack bulkhead cable using RG223 coax. | 0 | |||
| PE3W03990-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Gold Plated SMA Female Bulkhead to SMA Male Cable 48 Inch Length Using RG316 Coax., Radio frequency assembly gold plated SMA female bulkhead to SMA male cable 48 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Gold plated SMA female bulkhead to SMA male cable 48 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has female gender on end 1 and male on end 2. PE3W03990-48 can also be known as a SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMA plug cable assembly PE3W03990-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W03990-48 RF cable are available on our downloadable PDF datasheet.PE3W03990-48 can also be used in the other direction and will be SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Relay Specialties | MSM09041 | BlockMaster Blocks | PCB Terminal Block; 9-position 5.00mm; PCB Mount; 17.5A; 300V 30-12AWG; 35°Mod; Green |
| 214 | |
| 2904-05-411 | Coto Technology USA | Reed Relay, PC Board, Mounting 5 VDC, 1A SPST-NO ES Shield: Yes, RF Shield: No RoHS : Compliant |
| 187 | ||
| MTB09048-ON | BlockMaster Blocks | PCB Terminal Block; 9-position 3.50mm; PCB Mount; 12A; 300V 28-16AWG; 55°Mod; Black |
| 102 | ||
| 2904-05-201 | Coto Technology USA | Reed Relay |
| 50 | ||
| MSM29045 | BlockMaster Blocks | PCB Terminal Block; 29-pos 5.08mm; PCB Mount; 17.5A; 300V 30-12AWG; 35°Mod; Green |
| 46 | ||
| 190402-002 | Johnson Electric Group | SAIA-BURGESS LEDEX SPECIAL SOL |
| 11 | ||
| 70-904 | Stancor | Power Contactor; 50 A;36 VDC 1A SPST-NO;Continuous;Pnl Mnt Copper;Screw Term;114ohm |
| 10 | ||
| R99-04 FOR G5F | OMRON Corporation | OMRON IA |
| 5 | ||
![]() TE Connectivity | 1-770904-1 | TE Connectivity | MINI UMNL SOK 22-18AWG AU LF Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 22 – 18 AWG Operating Voltage: 600 VAC Gold (Au) Socket Tin 22 – 18 AWG | TE Connectivity RoHS : Compliant |
| 66,502 | |
| 1-770904-0 | TE Connectivity | MINI UMNL SOK 22-18 AWG AU Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 22 – 18 AWG Operating Voltage: 600 VAC Gold (Au) Socket Tin 22 – 18 AWG | TE Connectivity RoHS : Compliant |
| 54,950 | ||
| 1719043-1 | TE Connectivity | SWS,AMP MCP 6.3/4.8K,CVTY DIA,7-9.99,GRN Connector Seal & Plug Type: Single Wire Seal (SWS) Primary Product Color: Green Primary Product Material: Silicone Compatible Insulation Diameter Range: .157 – .2 in Compatible Insulation Diameter Range: 4 – 4.5 mm Single Wire Seal (SWS) Green Silicone .157 – .2" | TE Connectivity RoHS : Compliant |
| 22,200 | ||
| 180904 | TE Connectivity | FF 250 REC HSG 6P NYLON NAT Terminal Type: Receptacle Number of Positions: 6 Centerline (Pitch): .358 in Centerline (Pitch): 9.1 mm Terminal Orientation: Flag Receptacle 6 .358" 9.1 mm | Quick Disconnect | .358" | TE Connectivity RoHS : Compliant |
| 10,581 | ||
| 177904-1 | TE Connectivity | POWER D/LOCK PLUG HSG 10P Number of Positions: 10 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Ampseal Header | 10 Plug Housing Crimp | TE Connectivity RoHS : Compliant |
| 7,551 | ||
| 1-2444090-4 | TE Connectivity | SIP IC SKT 40 AU FLASH Number of Positions: 40 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Leg Style: Through Hole Circuit Application: Signal 40 .1" 2.54 mm Through Hole | .1" | TE Connectivity RoHS : Compliant |
| 3,338 | ||
| 1445904-1 | TE Connectivity | NUT,JAM,3/4-20,PKG QTY 100 Connector Hardware Accessory Type: Jam Nut Primary Product Material: Brass Operating Temperature (Max): 221 °F Operating Temperature (Max): 105 °C Operating Temperature Range: -67 – 221 °F Jam Nut Brass | TE Connectivity RoHS : Compliant |
| 2,003 | ||
| 1-2287390-4 | TE Connectivity | SWS,MCON 9.5,CVTY DIA,13.5,GRY Connector Seal & Plug Type: Single Wire Seal (SWS) Cavity Diameter: 13.5 mm Cavity Diameter: .531 in Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Single Wire Seal (SWS) 13.5 mm | TE Connectivity RoHS : Compliant |
| 660 | ||
| 1-2390471-3 | TE Connectivity | DYNAMIC D1100S 16POS. V-TYPE X Tin-pla PCB Connector Type: PCB Mount Header Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 1 Centerline (Pitch): 2 mm PCB Mount Header Wire-to-Board 16 | Ampseal Header | 2 mm | TE Connectivity RoHS : Compliant |
| 346 | ||
| 1-2490990-4 | TE Connectivity | 18POS,Sz 16,PIN HSG ASSY,SLD,COD D Nominal Voltage Architecture: 24 V Number of Positions: 18 Connector & Housing Type: Housing for Male Terminals Connector System: Cable-to-Cable Sealable: Yes Ampseal Header | 24 V 18 Housing for Male Terminals Cable-to-Cable | TE Connectivity RoHS : Compliant |
| 240 | ||
| 1-6609046-2 | TE Connectivity | 20ET6 J0=F7813 Current Rating: 20 A Input Termination Type: Stud Output Termination Type: Stud Leakage Current (Max) (120VAC, 60Hz): .3 mA Leakage Current (Max) (250VAC, 50Hz): .5 mA 20 A Stud .3 mA | TE Connectivity RoHS : Compliant |
| 120 | ||
| 1490413-3 | TE Connectivity | HYP10 SOLIS HD 1/0-4/0 AWG INDENTER Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Hydraulic Battery Manual Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Portable Crimp Tool | TE Connectivity RoHS : Compliant |
| 8 | ||
| 1490414-3 | TE Connectivity | HYP10 SOLIS HD 1/0AWG INDENTER Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Hydraulic Manual Battery Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Portable Crimp Tool | TE Connectivity RoHS : Compliant |
| 7 | ||
| 1609042-6 | TE Connectivity | 60VS6=F8249 Current Rating: 60 A Input Termination Type: Stud Output Termination Type: Stud Leakage Current (Max) (120VAC, 60Hz): .75 mA Leakage Current (Max) (250VAC, 50Hz): 1.25 mA 60 A Stud .75 mA | TE Connectivity RoHS : Compliant |
| 4 | ||
| 1490413-6 | TE Connectivity | HYP10 SOLIS 2/0AWG NEST Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Manual Hydraulic Battery Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Portable Crimp Tool | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Teledyne HiRel | M38510/28904BYA | Teledyne HiRel | STATIC RAM, 1K X 4, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
M38510/20904BJA![]() | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-87539043A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT, 20 NS RoHS : Not Compliant | 0 | |||
M38510/33904BFA![]() | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8873904QA | Teledyne HiRel | MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 50 NS MULTIPLY TIME RoHS : Not Compliant | 0 | |||
| 5962-8866904ZA | Teledyne HiRel | FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| M38510/00904BFA | Teledyne HiRel | SHIFT REGISTER, 8-BIT PARALLELERIAL INPUT RoHS : Not Compliant | 0 | |||
| 5962-89839042A | Teledyne HiRel | PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT RoHS : Not Compliant | 0 | |||
M38510/28904BVA![]() | Teledyne HiRel | STATIC RAM, 1K X 4, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| M38510/00904BEA | Teledyne HiRel | SHIFT REGISTER, 8-BIT PARALLELERIAL INPUT RoHS : Not Compliant | 0 | |||
| 5962-8873904XA | Teledyne HiRel | MULTIPLIER, 8 X 8 UNSIGNED MAGNITUDE, 50 NS MULTIPLY TIME | 0 | |||
| 5962-8866904YA | Teledyne HiRel | FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| M38510/20904BKA | Teledyne HiRel | PROM, 1K X 8, WITH 3-STATE OUTPUTS, 90 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8866904UA | Teledyne HiRel | FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8866904XA | Teledyne HiRel | FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | CR0603-16W-3904FT | VENKEL LTD | Chip Resistor;0603;1/16W;3.9M;�1% RoHS : Compliant | 30,000 | ||
| PWCR1206-UK-5904DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;5.9M;�0.5% RoHS : Compliant | 0 | |||
| AGCR1206-TL-5904FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�200PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-5904FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-5904FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| AGCR2010-WL-3904FT | VENKEL LTD | Auto Grade Resistor;2010;3/4W;�200PPM;3.9M;�1% RoHS : Compliant | 0 | |||
| HVCR2512-1W-3904FT | VENKEL LTD | High Voltage CR;2512;1W;3.9M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XK-5904FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�100PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-5904FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZK-5904FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�100PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-5904FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;5.9M;�1% RoHS : Compliant | 0 | |||
| AGCR1206-TL-3904FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�200PPM;3.9M;�1% RoHS : Compliant | 0 | |||
| CR0402-10W-5904FT | VENKEL LTD | Chip Resistor;0402;1/10W;5.9M;�1% RoHS : Compliant | 0 | |||
| CR0402-16W-5904DT | VENKEL LTD | Chip Resistor;0402;1/16W;5.9M;�0.5% RoHS : Compliant | 0 | |||
| CRG0805-R-3904FT | VENKEL LTD | RoHS 10/10 Green CR;0805;1/8W;3.9M;�1% RoHS : Compliant | 0 | |||
![]() Win Source Electronics | LMBT3904WT1 | onsemi | NPN Transistor 40V 200mA SC-70 |
| 720,000 | |
| 770904-1 | TE Connectivity | CONN SOCKET 18-22AWG TIN CRIMP RoHS : Compliant |
| 585,000 | ||
MBT3904DW1T1G![]() | onsemi | TRANS 2NPN 40V 0.2A SC88 RoHS : Compliant |
| 540,000 | ||
| MMBT3904LT | onsemi |
| 276,270 | |||
LM2904VDR2G![]() | onsemi | IC OPAMP GP 1MHZ 8SOIC RoHS : Compliant |
| 120,000 | ||
LM2904PWR![]() | Texas Instruments | IC OPAMP GP 700KHZ 8TSSOP RoHS : Compliant |
| 114,630 | ||
| MMBT3904M | Jiangsu Changjiang Electronics Technology Co Ltd |
| 80,000 | |||
| PAM8904EGP | Diodes Incorporated | Piezo Sounder Driver |
| 60,000 | ||
| BSZ0904NSIATMA1 | Infineon Technologies AG | RoHS : Compliant |
| 50,000 | ||
| MMBT3904M 1N | Jiangsu Changjiang Electronics Technology Co Ltd |
| 47,000 | |||
| WM8904ECS/R | Cirrus Logic | IC CODEC STEREO ULP 36WCSP RoHS : Compliant |
| 24,076 | ||
| PAM8904JPR | Diodes Incorporated | AUDIO HIGH VOLT U-QFN3030-12 T&R RoHS : Compliant |
| 18,490 | ||
MMPQ3904![]() | Fairchild Semiconductor Corporation | Trans GP BJT NPN 40V 0.2A 1000mW 16-Pin SOIC N T/R / TRANS 4NPN 40V 0.2A 16SOIC RoHS : Compliant |
| 10,000 | ||
| LTC6904CMS8#PBF | Linear Technology | IC OSC SILICON PROG 8-MSOP RoHS : Compliant |
| 6,360 | ||
| 2N3904S-RTK/S | KEC |
| 1,650 | |||
![]() Wuhan P&S | LM2904DR2G![]() | onsemi | Single Supply Dual Operational Amplifiers RoHS : Compliant |
| 1,880,000 | |
MMBT3904LT3G![]() | onsemi | General Purpose Transistor NPN Silicon RoHS : Compliant |
| 100,000 | ||
SMMBT3904LT3G![]() | onsemi | PNP Bipolar Transistor RoHS : Compliant |
| 90,000 | ||
LM2904DMR2G![]() | onsemi | Single Supply Dual Operational Amplifiers RoHS : Compliant |
| 36,000 | ||
LM2904DT![]() | STMicroelectronics | Low-power dual operational amplifier RoHS : Compliant |
| 10,000 | ||
LM2904ADMR2G![]() | onsemi | Single Supply Dual Operational Amplifiers RoHS : Compliant |
| 4,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |