880-SH2-R Price, Revenda, Stock

Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. C Female to TNC Male Cable Using RG142 Coax., Radio frequency assembly C female to TNC male cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to TNC male cable using RG142 coax, type C cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and TNC cable connection on the other. Our type C to TNC cable assemblies have a female gender on end 1 and male on end 2. PE3C7880 can also be known as a type C jack to TNC plug cable assembly and will be shipped same-day as it is purchased. C type jack to TNC plug cable assembly PE3C7880 is built with RG142 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type C female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7880 can also be used in the other direction and will be TNC male to C type female cable assembly if the opposite connectivity is required. Type C jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to TNC cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this C female to TNC male cable using RG142 coax.

PE45880

Pasternack Enterprises

Key Specifications, Connector Series: BNC, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: 0.141 Cable. BNC Jack Bulkhead Mount Non-Magnetic Connector Crimp/Solder Attachment for 0.141 Cable. PE45880 BNC jack bulkhead coaxial connector has an interface type of BNC jack 0.141 cable and a 50 Ohm impedance. This connector is part of our non-magnetic RF interconnects that are designed for carrying RF signals within a magnetic field. As such, they have a low level of magnetic susceptibility and no field distortion. Pasternack's BNC jack bulkhead connector uses crimp/solder as an attachment method. Our jack BNC coaxial connector provides a maximum frequency of 4 GHz. This BNC coaxial connector is stocked to be readily available for same business day shipment. The Pasternack BNC jack bulkhead coaxial connector has a maximum VSWR of 1.3:1. This non-magnetic connector is suitable for use in MRI and other medical imaging equipment, patient monitoring devices, medical technology, and other non-magnetic RF applications. Pasternack's BNC coaxial connector has a bz4 body with copper-tin-zinc alloy plating. Our PE45880 BNC connector uses gold over copper-plated beryllium copper contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from bz4 material and has a contact life of 500 cycles or more. The PE45880 BNC bulkhead non-magnetic connector operates at a temperature range of -65 to 165 deg C. This threaded jack coaxial RF connector has a maximum insertion loss of 0.2 dB. The Pasternack non-magnetic BNC jack connector has a maximum operating voltage of 500 Vrms and a dielectric withstanding voltage of 1,500 Vrms. This Pasternack non-magnetic jack BNC bulkhead connector will ship the same business day as purchased. Our bulkhead BNC jack connector is part of RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $197.99
25 : $190.07
50 : $184.13
100 : $180.17

PE3W10880

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-047SR Coax. PE3W10880 is a 2.4mm male to 2.4mm male cable using PE-047SR coax. This Pasternack 2.4mm male to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male 2.4mm to male 2.4mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10880 2.4mm male to 2.4mm male cable assembly is constructed with PE-047SR coax.

PE3W11880

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to QMA Male Right Angle Cable Using PE-P195 Coax. PE3W11880 is a N male to QMA male right angle cable using PE-P195 coax. This Pasternack N male to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11880 N male to QMA male right angle cable assembly is constructed with PE-P195 coax.

PE3W19880

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to 3.5mm Female Cable Using PE-P047 Coax. PE3W19880 is a TNC female bulkhead to 3.5mm female cable using PE-P047 coax. This Pasternack TNC female bulkhead to 3.5mm female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female TNC bulkhead to female 3.5mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19880 TNC female bulkhead to 3.5mm female cable assembly is constructed with PE-P047 coax.

PE3W22880LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-500-LLPL, RF Cable Type: SPP-500-LLPL, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Cable Using SPP-500-LLPL Coax, LF Solder. PE3W22880LF is a N male right angle to N female cable using SPP-500-LLPL coax. This Pasternack N male right angle to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to female N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22880LF N male right angle to N female cable assembly is constructed with SPP-500-LLPL coax.

PE3C4880-6

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4880-6, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4880-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4880-6 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 6 inch length using RG405 coax.

1 : $161.99
25 : $153.89
50 : $145.79

PE34880LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. BNC Female to SSMB Plug Cable Using RG178 Coax with HeatShrink, LF Solder. PE34880LF/HS is a BNC female to SSMB plug cable using RG178 coax. This Pasternack BNC female to SSMB plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SSMB for connector 2. Our female BNC to plug SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34880LF/HS BNC female to SSMB plug cable assembly is constructed with RG178 coax.

PE3W12880

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using RG58 Coax. PE3W12880 is a SMA male to BNC female bulkhead cable using RG58 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12880 SMA male to BNC female bulkhead cable assembly is constructed with RG58 coax.

PE3C4880-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our BMA to right angle BMA cable assemblies have a plug gender on end 1 and jack on end 2. This BMA to BMA cable is a plug to jack coax assembly, PE3C4880-12, can also be known as a BMA male to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA male to BMA female cable assembly PE3C4880-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA plug bulkhead to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4880-12 can also be used in the other direction and will be right angle BMA jack 2 hole flange to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax.

1 : $165.99
25 : $157.69
50 : $149.39

PE3W18807

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. QD QMA Male to N Male Right Angle Cable Using LMR-240-FR Coax. PE3W18807 is a QMA male to N male right angle cable using LMR-240-FR coax. This Pasternack QMA male to N male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm N for connector 2. QMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18807 QMA male to N male right angle cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18805

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Right Angle Cable Using LMR-100-FR Coax. PE3W18805 is a SMA male right angle to TNC male right angle cable using LMR-100A-FR coax. This Pasternack SMA male right angle to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18805 SMA male right angle to TNC male right angle cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W24880

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female to White FAKRA Jack Right Angle Cable Using RG316 Coax. PE3W24880 is a SMA female to FAKRA jack right angle cable using RG316 coax. This Pasternack SMA female to FAKRA jack right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. SMA to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24880 SMA female to FAKRA jack right angle cable assembly is constructed with RG316 coax.

PE38804/HS

Pasternack Enterprises

PE3W21880

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMA Female 2 Hole Flange Cable Using PE-P086HF Coax. PE3W21880 is a Mini SMP female to SMA female 2 hole flange cable using PE-P086HF coax. This Pasternack Mini SMP female to SMA female 2 hole flange cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female Mini SMP to female SMA 2 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21880 Mini SMP female to SMA female 2 hole flange cable assembly is constructed with PE-P086HF coax.

Teledyne HiRel

5962-9318801MSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8968801EA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9318801Q2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8968801FA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9318801QSA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9318801MRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9218801MRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9318801M2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9218801MSA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9318801QRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89688012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9218801M2A

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

FBC1808-800E

VENKEL LTD

High Current Ferrite Bead;1808;80R
RoHS : Compliant

TFCR0402-16W-E-9880CT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;988R;�0.25%
RoHS : Compliant

TFCR0402-16W-K-3880BT

VENKEL LTD

Thin Film CR;0402;1/16W;�100PPM;388R;�0.1%
RoHS : Compliant

TFCR0603-10W-C-9880DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;988R;�0.5%
RoHS : Compliant

TFCR0603-10W-E-9880CT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;988R;�0.25%
RoHS : Compliant

TFCR0603-16W-K-3880CT

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;388R;�0.25%
RoHS : Compliant

TFCR0603-16W-K-3880DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�100PPM;388R;�0.5%
RoHS : Compliant

TFCR0805-8W-C-9880FT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;988R;�1%
RoHS : Compliant

UPTF0402-16W-E-9880AT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�25PPM;988R;�0.05%
RoHS : Compliant

UPTF0603-16W-N-3880BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;388R;�0.1%
RoHS : Compliant

UPTF0603-16W-N-9880AT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;988R;�0.05%
RoHS : Compliant

UPTF0805-10W-P-9880UT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;988R;�0.01%
RoHS : Compliant

TFCR0805-10W-K-3880CT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;388R;�0.25%
RoHS : Compliant

TFCR1206-4W-K-3880BT

VENKEL LTD

Thin Film CR;1206;1/4W;�100PPM;388R;�0.1%
RoHS : Compliant

TFCR1206-8W-C-9880CT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;988R;�0.25%
RoHS : Compliant

Waytek, Inc.

35138800

Aptiv PLC

Aptiv OCS 1.5 Series Female Terminal 20-22 Ga, Reel (2,800 pcs = 1 Reel)

2,800 : $0.0358
14,000 : $0.0348

16,800

35138800

Aptiv PLC

Aptiv OCS 1.5 Series Female Termianl 20-22 Ga, Loose

100 : $0.1223
200 : $0.0944
500 : $0.0864
1,000 : $0.0793
5,000 : $0.0731

3,800

880014

Cole Hersee

MEGA AMG Sealed SN Fuse Block 500A 60V DC SAE J1171 ISO 8846 LIKE BLUE SEA 7721 78162

1 : $52.02
5 : $46.9
10 : $44.08
50 : $41.77
100 : $39.97
200 : $38.18

1,073

0888060.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 60A
RoHS : Compliant

1 : $6.52
50 : $5.46
100 : $5.14

277

880027

Littelfuse Inc

ST Series Fuse Block, 6 Way w/Common Ground Bussed

1 : $58.81
5 : $54.95
10 : $51.36
25 : $48.87
50 : $47.22

156

880089

Littelfuse Inc

2DM 4MIDI 6ATC w/ Ground Fuse Block w/ Power Input Stud
RoHS : Compliant

1 : $181.33
5 : $167.22
10 : $155.27
25 : $148.77

880175-0002

Littelfuse Inc

TR Series Dual Pole Master Disconnect Switch, Ylw Handle, 500A, 48VDC Max
RoHS : Compliant

1 : $124.7399
5 : $108.2378
10 : $101.643
20 : $97.0212
25 : $93.0572
50 : $89.0991

880118

Cole Hersee

250A 4 X 5/16 Stud Busbar 48V LIKE BLUESEA BUS BAR BUSSBAR

1 : $108.63
5 : $104.82
10 : $101.5
20 : $96.78
50 : $93.59
100 : $90.61

880094

Littelfuse Inc

PDM Power Dist Mod W/O Bat Main (Vendor DISCO'd)

1 : $164.83
5 : $157.91
10 : $151.87
25 : $142.39

880076

Littelfuse Inc

Littelfuse 880076-SL PDM Fuse Block with Control Knob Switch (Supplier DISCO)

1 : $258.8
5 : $248.48
10 : $238.19
25 : $224.02

880088

Cole Hersee

High-Amp SPST Remote HD Relay 24V 300A Continuous Duty DTM6 Battery Switch

1 : $327.9
5 : $314.49
10 : $302.56
25 : $280.21

880092

Littelfuse Inc

Contura Remote Switch SPDT On-Off-On Use w/ 45955 (MFG#880075)

1 : $54.71
5 : $51.55
10 : $49.7
20 : $48.39
50 : $47.86
100 : $44.45

110-88004

HellermannTyton

The HellermannTyton 110-80000 EVO 9 is a heavy-duty cable tie installation tool designed for precise tensioning and flush cutting of larger nylon cable ties. Compatible with 50250 lb. ties and widths up to 13.5 mm (0.53"), it features 33 adjustable tension settings and a quick-adjust override for consistent, repeatable performance. Engineered with ergonomic Tension-Lock-Cut (TLC) technology, it minimizes kickback and operator fatigue while ensuring clean, flush cuts at the selected tension. Built with durable materials and a lightweight, glass fiberreinforced housing, it is ideal for automotive, industrial, and heavy-duty cable management applications.

1 : $572.23
10 : $536.94

880075

Littelfuse Inc

SL Series 300A 12V Power Distribution Module w/Bi-Stable Switching Relay

1 : $237.92
5 : $228.44
10 : $218.98
25 : $205.96

880064

Cole Hersee

Cole Hersee 880064 Terra SR Series battery disconnect switch is a 300A mechanical disconnect with lockout for heavy-duty battery isolation. The SR Series design supports surface, panel, or floor trim mounting with a rugged case for vehicle power control.

1 : $49.78
5 : $48.17
10 : $45.47
20 : $43.32
50 : $41.44
100 : $39.02

880-SH2-R Revenda

Ligação URL