| Os motores de busca de Datasheet de Componentes eletrônicos |
|
853-R5K- Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Braemac Americas-Symmetry | AB308-53.125MHZ![]() | Abracon Corporation | CRYSTAL 53.1250MHZ 16PF T/H RoHS : Compliant |
| 0 | |
| AA.185.301111 | Taoglas Antenna Solutions | Adhesive Mount, Low Profile, Single Stage LNA GNSS Antenna 3m RG-174 with SMA(M) |
| 0 | ||
| MA853.K.BIC.001 | Taoglas Antenna Solutions | Colosseum 3in1 3048mm TGC-200 LTE(1&2)-SMA(M):TGC-200 WiFi RP-SMA(M) |
| 0 | ||
![]() Pasternack Enterprises US | PE39285-3 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 3 inches. SMA Male to Mini SMP Female Cable 3 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA male to mini SMP female cable 3 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to mini SMP female cable 3 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to mini SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and mini SMP cable connection on the other. Our SMA to mini SMP cable assemblies have a male gender on end 1 and female on end 2. PE39285-3 can also be known as a SMA plug to mini SMP jack cable assembly and will be shipped same-day as it is purchased. SMA plug to mini SMP jack cable assembly PE39285-3 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to mini SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA male to mini SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39285-3 can also be used in the other direction and will be mini SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to mini SMP female cable 3 inch length using PE-047SR coax. |
| 382 | |
| PE9853B-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Standard Gain Horn Antenna, 15 GHz to 22 GHz Frequency Range, 20 dBi Gain, Flange. Pasternack’s PE9853B-20 WR-51 waveguide horn is also known as a waveguide horn antenna. This WR-51 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 15 to 22 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.83 inches, a width of 2.37 inches, and a weight of 0.05 lbs. Our antenna comes with a square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-51 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-51 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 6 | ||
| PE9853B/SF-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 20, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Standard Gain Horn Antenna Operating From 15 GHz to 22 GHz, 20 dBi Nominal Gain, SMA Female Input Connector, ProLine. The PE9853B/SF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. Our WR-51 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-51 standard gain horn antenna with an SMA female input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE9853B/SF-20 waveguide horn antenna has a typical gain of 20 dB. This WR-51 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 6 | ||
| PE3W13853/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-240-FR Coax with HeatShrink. PE3W13853/HS is a TNC male to TNC male cable using LMR-240-FR coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13853/HS TNC male to TNC male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18531-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SHV Plug to HN Male Cable 72 Inch Length Using RG223 Coax., Radio frequency assembly SHV plug to HN male cable 72 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to HN male cable 72 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SHV to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SHV cable connection on one end and a HN cable connection on the other. Our SHV to HN cable assembly has a plug gender on end 1 and a male on end 2. PE3W18531-72 can also be known as a SHV male to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18531-72 RF cable has a PVC jacket of 0.209-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our SHV plug to HN male cable has a maximum VSWR of 1.4:1. SHV male to HN plug cable assembly PE3W18531-72 is built with RG223 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W18531-72 can also be used in the other direction and will be a HN male to SHV plug cable assembly if the opposite connectivity is required. SHV male to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SHV to HN cable assembly for quick shipment worldwide. Variations of SHV and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SHV to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15085-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Female Cable 36 Inch Length Using RG196 Coax., Radio frequency assembly BNC male to BNC female cable 36 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female cable 36 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W15085-36 can also be known as a BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W15085-36 RF cable has a PTFE jacket of 0.080-inch diameter. The flexible RF cable has an in-series connection. BNC plug to BNC jack cable assembly PE3W15085-36 is built with RG196 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15085-36 can also be used in the other direction and will be a BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18538 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. TNC Male to N Male Right Angle Cable Using LMR-195-UF Coax. PE3W18538 is a TNC male to N male right angle cable using LMR-195-UF coax. This Pasternack TNC male to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18538 TNC male to N male right angle cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3FCA085-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual LC UPC to ST UPC, SM OS2, 2.0mm Plenum, Yellow - 3 meter. Pasternack’s PE3FCA085-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long patch cable assembly is equipped with duplex LC/UPC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA085-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W03853 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. UHF Male to N Female Bulkhead Cable Using LMR-400 Coax. PE3W03853 is a UHF male to N female bulkhead cable using LMR-400 coax. This Pasternack UHF male to N female bulkhead cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03853 UHF male to N female bulkhead cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17853-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17853-60 can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17853-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17853-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11853 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to SMA Male Cable Using RG141 Coax. PE3W11853 is a BNC female bulkhead to SMA male cable using RG141 coax. This Pasternack BNC female bulkhead to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11853 BNC female bulkhead to SMA male cable assembly is constructed with RG141 coax. | 0 | |||
| PE33185-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Male to TNC Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly TNC male to TNC male cable 36 inch length using RG393 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE33185-36, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE33185-36 is built with RG393 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 36 inch length using RG393 coax. |
| 0 | ||
| PE3C10853-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-6 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-6 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-6 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-6 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2853 | Pasternack Enterprises | Key Specifications, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using RG8X Coax. PE3C2853 is a to cable using RG8X coax. This Pasternack to cable assembly uses a for connector 1 and a for connector 2. Our to cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2853 to cable assembly is constructed with RG8X coax. | 0 | |||
| PE3C8532 | Pasternack Enterprises | 0 | ||||
![]() Teledyne HiRel | 5962-8853401EA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
5962-8853201YA![]() | Teledyne HiRel | A/D CONVERTER, 9-BIT RoHS : Not Compliant | 0 | |||
5962-8853201XA![]() | Teledyne HiRel | A/D CONVERTER, 9-BIT RoHS : Not Compliant | 0 | |||
| 5962-8853401FA | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-88534012A | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8853201UA![]() | Teledyne HiRel | A/D CONVERTER, 9-BIT RoHS : Not Compliant | 0 | |||
5962-8853201TC![]() | Teledyne HiRel | A/D CONVERTER, 9-BIT | 0 | |||
5962-8853201ZA![]() | Teledyne HiRel | A/D CONVERTER, 9-BIT RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | CR1206-8W-1853FT | VENKEL LTD | Chip Resistor;1206;1/8W;185K;�1% RoHS : Compliant | 0 | ||
| CR1206-4W-1853FT | VENKEL LTD | Chip Resistor;1206;1/4W;185K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | UPD46185364BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 11,719 | ||
| UPD46185364BF1-E40Y-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 10,509 | |||
Z8536AB1V![]() | STMicroelectronics | RoHS : Not Compliant | 6,882 | |||
| XC5VLX85-3FF1153C | AMD Xilinx | Field Programmable Gate Array, 6480 CLBs, 82944-Cell, PBGA1153 RoHS : Not Compliant | 4,198 | |||
| UPD46185362BF1-E33-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 512KX36, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 4,142 | |||
| XC5VLX85-3FFG1153I | AMD Xilinx | Field Programmable Gate Array, 710MHz, 6480-Cell, CMOS, PBGA1153 RoHS : Compliant | 3,548 | |||
| XC5VLX85-3FFG676I | AMD Xilinx | Field Programmable Gate Array, 710MHz, 6480-Cell, CMOS, PBGA676 RoHS : Compliant | 2,917 | |||
| XC5VLX85-3FFV1153C | AMD Xilinx | Field Programmable Gate Array, 6480 CLBs, 82944-Cell, PBGA1153 RoHS : Compliant | 2,772 | |||
XC5VLX85-3FFG676C![]() | AMD Xilinx | Field Programmable Gate Array, 6480 CLBs, 82944-Cell, PBGA676 RoHS : Compliant | 2,593 | |||
| VXM9-9008-53M7109370 | Microchip Technology Inc | Parallel - Fundamental Quartz Crystal, 53.710937MHz Nom RoHS : Compliant | 2,569 | |||
| XC5VLX85-3FF676I | AMD Xilinx | Field Programmable Gate Array, 710MHz, 6480-Cell, CMOS, PBGA676 RoHS : Not Compliant | 1,973 | |||
| XC5VLX85-3FF1153I | AMD Xilinx | Field Programmable Gate Array, 710MHz, 6480-Cell, CMOS, PBGA1153 RoHS : Not Compliant | 1,624 | |||
XC5VLX85-3FF676C![]() | AMD Xilinx | Field Programmable Gate Array, 6480 CLBs, 82944-Cell, PBGA676 RoHS : Not Compliant | 1,549 | |||
| XC5VLX85-3FFG1153C | AMD Xilinx | Field Programmable Gate Array, 6480 CLBs, 82944-Cell, PBGA1153 RoHS : Compliant | 1,242 | |||
| VSC8531XMW-04 | Microchip Technology Inc | Ethernet Transceiver, 1-Trnsvr, PQCC48 RoHS : Compliant | 637 | |||
![]() Waytek, Inc. | 131853-91IE | General Cable Technologies Corporation | 20GA GXL Tan Cross-Link Automotive Wire XLPE -51C to 125C |
| 32,500 | |
| 148530-91W | General Cable Technologies Corporation | 18GA SXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 17,000 | ||
| 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 5,423 | ||
| 48530 | Cole Hersee | 200A Smart Battery Isolator SAE J1455 and J1113 9V to 16V -40C TO 85C COLE HERSEE 48530 |
| 478 | ||
| 882-853 | Littelfuse Inc | ZCase 3 Way Bus Bar & Studs M8 Nuts Not Included |
| 93 | ||
| 14100853 | Sargent Quality Tools | Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT |
| 25 | ||
| 8530-1535B | Egis Mobile Electric | XD Flex L Triple - (Relay/VSR/Relay)-Flying Wires |
| 6 | ||
| 9821-8530B | Egis Mobile Electric | XD NMEA 2000 Dual -(Relay/VSR) w/Knobs - 8P DT |
| 6 | ||
| 7010398853 | 3M | 3M EPS-300 heat shrink tubing is red polyolefin tubing with a 1" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 0 | ||
| 0FHZ00853-BX | Littelfuse Inc | 3 Position Battery Mount Z-Case Fuse Holder Kit |
| 0 | ||
![]() Win Source Electronics | AD8531ART-REEL7![]() | Analog Devices Inc | Low Cost, 250 mA Output, Single-Supply Amplifiers / Op Amp Single GP R-R I/O 6V Automotive 5-Pin SOT-23 T/R RoHS : Not Compliant |
| 49,500 | |
AD8531ART-REEL![]() | Analog Devices Inc | Low Cost, 250 mA Output, Single-Supply Amplifiers / Op Amp Single GP R-R I/O 6V Automotive 5-Pin SOT-23 T/R RoHS : Not Compliant |
| 48,000 | ||
853S111BYILFT![]() | Integrated Device Technology Inc | Low Skew, 1-to-10, Differential-to-2.5V, 3.3V LVPECL/ECL Fanout Buffer RoHS : Compliant |
| 23,787 | ||
LTC3853EUJ#PBF![]() | Linear Technology | IC REG CTRLR BUCK 40QFN RoHS : Compliant |
| 16,940 | ||
AD8534ARU![]() | Analog Devices Inc | IC OPAMP GP R-R CMOS 14TSSOP / General Purpose Amplifier 4 Circuit Rail-to-Rail 14-TSSOP RoHS : Not Compliant |
| 15,700 | ||
| AD8534ARU-RELL | Analog Devices Inc |
| 15,700 | |||
AD8532AR![]() | Analog Devices Inc | IC OPAMP GP 3MHZ RRO 8MSOP RoHS : Not Compliant |
| 12,000 | ||
| AD8532ARZREE7 | ADI Electronics Inc |
| 10,323 | |||
| 1-1318853-3 | TE Connectivity | CONN HEADER R/A 24POS 2.2MM RoHS : Compliant |
| 6,151 | ||
| ADM4853ARZ-REEL | Analog Devices Inc |
| 5,440 | |||
85314BGI-01LFT![]() | Integrated Device Technology Inc | Clock Multiplexer 5-OUT 2-IN 1:5 20-Pin TSSOP T/R / IC CLK BUFFER 2:5 700MHZ 20TSSOP RoHS : Compliant |
| 3,000 | ||
853S011BGILF![]() | Integrated Device Technology Inc | IC CLK BUFFER 1:2 2.5GHZ 8TSSOP RoHS : Compliant |
| 2,561 | ||
| 853S111BYILF | Renesas Electronics Corporation | IC CLK BUF 2:10 2.5GHZ 32PTQFP RoHS : Compliant |
| 2,000 | ||
| 782485/35C | Murata Power Solutions | XFRMR 1:2.2 T/H ADM2485 ANLG DEV / RoHS : Compliant |
| 1,284 | ||
AD8534AR-REEL![]() | Analog Devices Inc | Low Cost, 250 mA Output, Single-Supply Amplifiers / Op Amp Quad GP R-R I/O 6V Automotive 14-Pin SOIC N T/R RoHS : Not Compliant |
| 480 | ||
![]() Wuhan P&S | NCV8535MN500R2G![]() | onsemi | Ultra High Accuracy, Low Iq, 500 mA Low Dropout Regulator with Enable RoHS : Compliant |
| 3,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |