| Os motores de busca de Datasheet de Componentes eletrônicos |
|
836110012 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() DigiKey | A836-1A1T-91B | Bel Fuse | CONN JACK 1PORT PCB RoHS : Compliant |
| 660 | |
| 8361 | Elesa SPA | CT.476-P, WING KNOBS, ZINC-PLATE |
| 451 | ||
| GTC08-36-10S-023 | PEI-GENESIS | GT 48C 48#16 SKT PLUG |
| 174 | ||
| GTC08-36-10SZ-023 | PEI-GENESIS | GT 48C 48#16 SKT PLUG |
| 174 | ||
| GTC08-36-12S-023-LC | PEI-GENESIS | GT 48C 48#16 SKT PLUG |
| 174 | ||
| GTC08-36-10SZ-023-LC | PEI-GENESIS | GT 48C 48#16 SKT PLUG |
| 174 | ||
| 1836134 | Phoenix Contact | TERM BLOCK PLUG 8POS 5.08MM RoHS : Compliant |
| 97 | ||
| 8361 | JKL Components Corporation | LAMP INCAN RT-1.75 WIRE TERM 28V |
| 44 | ||
| CE.83613 | Elesa SPA | DD52R, MECHANICAL POSITION INDIC |
| 10 | ||
| ESDC-7836-1201 | Kendall Howard | PEGBOARD 21.287X23X1.066" GRAY |
| 4 | ||
| PHW483616 | Hammond Manufacturing | BOX FIBERGLASS 51.3"L X 36.61"W RoHS : Compliant |
| 1 | ||
| 8361 | Littelfuse Inc | NUT FACE 5/8-32 |
| 0 | ||
| 8361 | Visual Communications Company | LAMP INCAN RT-1.75 WIRE TERM 28V |
| 0 | ||
| 8361 | Abbatron | STDF 8361 AL RND |
| 0 | ||
| 8361 | Keystone Electronics Corp | TWO WAY CONNECT18AWG/18AWG 2 WIR |
| 0 | ||
![]() Avnet Americas | 316836-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip - Tape and Reel (Alt: 316836-1) RoHS : Compliant |
| 96,000 | |
| 83612-9020 | Molex | D-Sub Connector, Plug, 15 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83612 Series - Rail/Tube (Alt: 0836129020) RoHS : Compliant |
| 2,097 | ||
| 83611-9006 | Molex | Conn Micro D Subminiature Plug 9 POS 1.27mm Solder RA Through Hole Tube - Rail/Tube (Alt: 0836119006) RoHS : Compliant |
| 1,407 | ||
| 83614-9014 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83614 Series - Rail/Tube (Alt: 0836149014) RoHS : Compliant |
| 1,320 | ||
| 83614-9012 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83614 Series - Rail/Tube (Alt: 0836149012) RoHS : Compliant |
| 849 | ||
| 83614-9016 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Straight, 83614 Series - Rail/Tube (Alt: 0836149016) RoHS : Compliant |
| 204 | ||
| BFC238361223 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 0.022 uF, ? 5%, Through Hole, 700 V - Bulk (Alt: BFC238361223) RoHS : Compliant |
| 0 | ||
| MAL215836123E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 12000 uF, 25 V, ? 20%, Snap-In - Boxed Product (Development Kits) (Alt: MAL215836123E3) RoHS : Compliant |
| 0 | ||
| M83723/83610066 | Amphenol Corporation | - Bulk (Alt: M83723/83610066) RoHS : Not Compliant |
| 0 | ||
| M83723/83618086 | Amphenol Corporation | - Bulk (Alt: M83723/83618086) RoHS : Not Compliant | 0 | |||
| 83611-9208 | Molex | - Rail/Tube (Alt: 0836119208) RoHS : Compliant | 0 | |||
| 83619-9200 | Molex | - Rail/Tube (Alt: 0836199200) RoHS : Compliant | 0 | |||
| 7-2836121-7 | TE Connectivity | - Bulk (Alt: 7-2836121-7) RoHS : Not Compliant | 0 | |||
| 7-2836158-7 | TE Connectivity | - Bag (Alt: 7-2836158-7) RoHS : Not Compliant | 0 | |||
| KP1836122204W | Vishay Intertechnologies | - Tape and Reel (Alt: KP1836122204W) RoHS : Compliant | 0 | |||
![]() Newark | E48361-000 | TE Connectivity | TN-381191-5-9; RoHS : Compliant |
| 15,000 | |
| 8-36152-1 | TE Connectivity | RING TONGUE, M3.5, #6, 16AWG; RoHS : Compliant |
| 3,742 | ||
| MP008361 | SPC Multicomp | SMD FUSE, MICRO, 60A, 80V, 7.3MM X 5.8MM; RoHS : Compliant |
| 3,532 | ||
| MP008361 | SPC Multicomp | SMD FUSE, MICRO, 60A, 80V, 7.3MM X 5.8MM; RoHS : Compliant |
| 3,532 | ||
| 316836-1 | TE Connectivity | CONTACT, SOCKET, 21-18AWG, CRIMP; RoHS : Compliant |
| 2,969 | ||
| 316836-1 | TE Connectivity | CONTACT, SOCKET, 21-18AWG, CRIMP; RoHS : Compliant |
| 2,969 | ||
| M39029/58-361 | Amphenol Aerospace | CIRCULAR CONTACT, SIZE 22M, PIN, CRIMP; Product Range:MIL-DTL-38999 Series II; Contact Gender:Pin; Contact Termination Type:Crimp; Wire Size AWG Max:22AWG; Wire Size AWG Min:28AWG; Contact Plating:Gold Plated Contacts RoHS Compliant: Yes RoHS : Compliant |
| 2,700 | ||
| 83611-9006 | Molex | CONN, D-SUB, MOLEX 83611-9006; (Alternate Part Number: 800754026239 RoHS : Compliant |
| 480 | ||
| 83614-9016 | Molex | D-SUB CONN, PLUG, 25POS, PANEL; (Alternate Part Number: 800756436319 RoHS : Compliant |
| 299 | ||
| 2008361 | Laser Components USA Inc | LASER DIODE, 655NM; RoHS : Compliant |
| 163 | ||
| 0836129020 | Molex | D-SUB CONN, PLUG, 15POS, PANEL; (Alternate Part Number: 800755952933 RoHS : Compliant |
| 55 | ||
| 7TCA083610R0013 | ABB Low Voltage Products and Systems | 25X3 COPPER SQUARE CLAMP (UN-NAMED); RoHS : Compliant |
| 19 | ||
| 8-36151-1 | TE Connectivity | TERMINAL, RING TONGUE, #6, CRIMP, RED; Stud Size - Metric:M3.5; Stud Size - Imperial:#6; Wire Size AWG Max:16AWG; Conductor Area CSA:1.42mm²; Product Range:PIDG Series; Insulator Colour:Red; Insulator Material:Nylon (Polyamide) RoHS Compliant: Yes RoHS : Compliant |
| 8 | ||
| MAX98361AEVSYS#WLP | Analog Devices Inc | EVAL SYSTEM, MONO CLASS D AUDIO AMP; RoHS : Compliant |
| 1 | ||
| 8361 | Abbatron | STANDOFF; RoHS : Not Compliant |
| 0 | ||
![]() RS | AP836 100R J | Arcol | 35 WATTS TO-220 THICK FILM100 OHMS 5%100PPM |
| 98 | |
| M39029/58-361 | Amphenol Aerospace | CONTACT PIN CRIMP 22-28AWG |
| 22 | ||
| 5418361 | RS Pro | DC AXIAL FAN, 120X120X38.5MM, 178.5M3/H,6W, 12 VDC (OD1238 SERIES) |
| 12 | ||
| 8361 | ELESA USA | CT.476/30 P-M6X10, WING KNOBS, ZINC-PLATED STEEL THREADED STUD |
| 10 | ||
| 24568-361 | nVent Schroff | GUIDE RAIL |
| 10 | ||
| 3883612 | RS Pro | PRY BAR STEEL 4 PC 7.87" (200MM) 11.81" (300MM) 17.72" (450MM) 23.62" (600MM) |
| 9 | ||
| 1368361 | RS Pro | HIGH PERFORMANCE DRIVE BELT, SPA SECTION WRAPPED WEDGE, 54.4 IN (1382 MM) |
| 5 | ||
| 2483619 | RS Pro | HOOK-UP WIRE, BLACK SILICONE RUBBER STRANDED 20AWG, 0.5MM2 16 0.2MM 82FT (25M) |
| 2 | ||
| BSM BKWM 14-836-1 (U-10528) | TURCK Inc | BSM BKWM 14-836-1, U-10528 |
| 2 | ||
| LAT-18-361-2.5 | Brady Worldwide Inc | 1.000 IN X 1.330 IN (25.40 MM X 33.78 MM) RoHS : Compliant |
| 1 | ||
| 108361A (108361A CX100) | Amphenol Lutze | MULT-CONDUCTOR CONTROL CABLE, 18 AWG, 12 CONDUCTOR, PVC, GREY, 600V, UNSHIELDED |
| 1 | ||
| BKWM 14-836-10 (U0969-31) | TURCK Inc | BKWM 14-836-10, U0969-31 |
| 1 | ||
| 8361 | HH Smith | STANDOFF; ROUND; ALUMINUM; 8-32 THREAD; 1/4" OD; 1/4" LENGTH; FULL THREAD |
| 0 | ||
| 8361 | Littelfuse Inc | NUT FACE 5/8-32 |
| 0 | ||
| 8361 | Burkert Fluid Control Systems | CABLE PLUG, 2508-01-B-00-3-1-BBJ |
| 0 | ||
![]() Microchip Technology Inc | AT28C256-15UM/883-610![]() | Microchip Technology Inc | 150NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 - Contact for Pricing RoHS : Compliant | 0 | ||
![]() Rochester Electronics | TEA18361LT/1J | NXP Semiconductors | Power Supply Power Supply Controller 14-SOIC T/R RoHS : Compliant |
| 17,500 | |
AD8361ARTZ-RL7![]() | Analog Devices Inc | RF Detectors Cellular, CDMA, W-CDMA SOT-23-6 T/R RoHS : Compliant |
| 1 | ||
AD8361ART-REEL![]() | Analog Devices Inc | Analog Circuit, 1 Func, BIPolar, PDSO6 RoHS : Not Compliant |
| 92,061 | ||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | RF Detectors Cellular, CDMA, W-CDMA 8-SOP T/R RoHS : Compliant |
| 12 | ||
AD8361ART-REEL7![]() | Analog Devices Inc | Analog Circuit, 1 Func, BIPolar, PDSO6 RoHS : Not Compliant |
| 11,593 | ||
ADS8361IDBQG4![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 24-SOP Tube RoHS : Compliant |
| 3 | ||
ADS8361IDBQ![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 24-SOP Tube RoHS : Compliant |
| 18 | ||
ADS8361IRHBT![]() | Texas Instruments | IC ADC 2 CONV 16Bits SAR Serial 32-QFN T/R RoHS : Compliant |
| 164 | ||
![]() Sager | 8361 | Keystone Electronics Corp | Terminals 18 AWG BLUE 10A 2 WIRES | 0 | ||
| AAB8361-00 | TE Connectivity | TE Connectivity | 0 | |||
| P8-361311A | OTTO Engineering Inc | SUBMINIATURE MOMENTARY ACTION SEALED PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 7-2836121-7 | TE Connectivity | Crimpers / Crimping Tools OC-055F055O-CRIMPTOO LINGKIT | 0 | |||
| 7-2836158-7 | TE Connectivity | Crimpers / Crimping Tools OC-196F230F-CRIMPTOO LINGKIT | 0 | |||
| IEGH1111-23836-1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 3 836 160 | Lumasense Technologies Inc | REPLACEMENT OPTICAL FIBER FOR IS 50-LO/GL, 5M |
| 0 | ||
| 2836109-1 | TE Connectivity | Bench Top Tools OC-AT-S-FM-076F144F-112-1457 | 0 | |||
| 2836126-2 | TE Connectivity | Bench Top Tools OC-AT-S-FA-050F062F-752-0952 | 0 | |||
| 0836110110 | Molex | D-Sub Standard Connectors | 0 | |||
| 0836199005 | Molex | Molex | 0 | |||
| 1200868361 | Molex | Sensor Cables / Actuator Cables | 0 | |||
| 0836119202 | Molex | D-Sub Standard Connectors | 0 | |||
| 0836131712 | Molex | Molex | 0 | |||
| 0836161610 | Molex | Molex | 0 | |||
![]() TME | 1183613 | Bossard Group | Screw; 4x6; Head: cheese head; Pozidriv; PZ2; A2 stainless steel |
| 1,900 | |
| 183611S | KING TONY | Screwdriver bit; slot; 11x2mm; 5/16"; Overall len: 36mm |
| 3 | ||
| 8361 | PROLINK | Cable; HDMI plug,both sides; HDMI 1.4,High Speed; 3m |
| 1 | ||
| 8361 | Elesa+Ganter | Knob wing; Ext.thread: M6; 10mm; H: 15mm; polyamide; W: 30mm |
| 0 | ||
| 00836 180000 100 | RECA | Screw; M6; M6x180; Head: cheese head; hex key; 5mm; steel; none |
| 0 | ||
| 02836 12 000 200 | RECA | Screw; M6; M6x12; Head: button; Phillips; PH3; A2 stainless steel |
| 0 | ||
| 12836 16 000 1000 | RECA | Screw; M6; M6x16; Head: button; Phillips; PH3; A4 stainless steel |
| 0 | ||
| 1836118 | Phoenix Contact | Connector: pluggable terminal block; plug; female; 8A; 160V; green RoHS : Compliant |
| 0 | ||
| 1836163 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 630V RoHS : Compliant |
| 0 | ||
| 20836 140000 200 | RECA | Screw; M6; M6x140; Head: cheese head; hex key; HEX 5mm; steel; none |
| 0 | ||
| 8683610 | Gedore Torque Ltd | Interchangeable blade; 900mm; wood (hickory) |
| 0 | ||
| 00836 12 000 1000 | RECA | Screw; M6; M6x12; Head: cheese head; hex key; HEX 5mm; steel; none |
| 0 | ||
| 10048361 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 30; THT; 3A; 250V; 1x30 |
| 0 | ||
| 20836 145000 200 | RECA | Screw; M6; M6x145; Head: cheese head; hex key; HEX 5mm; steel; none |
| 0 | ||
| 3668361 | Bossard Group | Screw; for wood; 10x180; Head: countersunk; Torx®; TX40; zinc |
| 0 | ||
![]() ComSIT USA | 836199003 | MOLEX INC | AVAILABLE EU | 248 | ||
![]() ComSIT USA | 9278361 | TE Connectivity | Connector Accessory RoHS : Not Compliant | 7,500 | ||
| AD8361ARTZRL7 | Analog Devices Inc | LF TO 2.5 GIGA HZ POWER DETECTOR Analog Circuit, 1 Func, PDSO6 RoHS : Compliant | 3,315 | |||
| KP1836133135W | Vishay Intertechnologies | Cap Film 330pF 1600V PP 10% Radial Plastic Rectangular Can 100�C T/R RoHS : Compliant | 1,500 | |||
| MAL204836102E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount RoHS : Compliant | 500 | |||
AD8361ARMZ![]() | Analog Devices Inc | LF TO 2.5 GIGA HZ POWER DETECTOR Analog Circuit, 1 Func, PDSO8 RoHS : Compliant | 52 | |||
| 1AB08361AAAATBDAOAA | Alcatel-Lucent | Electronic Component RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | 21-033836-111 | Amphenol Aerospace | 0 | |||
| 2050836-1 | TE Connectivity | PACKAGE COMPONENT FOR 65P MIXE RoHS : Compliant | 0 | |||
| 41836101700A02 | Amphenol PCD | RHINO | 0 | |||
| 41836102300C03 | Amphenol PCD | RHINO | 0 | |||
| 41836111700002 | Amphenol PCD | RHINO | 0 | |||
| 41836112500D03 | Amphenol PCD | RHINO | 0 | |||
| 41836122100A03 | Amphenol PCD | RHINO | 0 | |||
| 41836122100C10 | Amphenol PCD | RHINO | 0 | |||
| 4183612250000 | Amphenol PCD | RHINO | 0 | |||
| 41836132100003 | Amphenol PCD | RHINO | 0 | |||
| 41836132300B03 | Amphenol PCD | RHINO | 0 | |||
| 41836132300D10 | Amphenol PCD | RHINO | 0 | |||
| 10208361-00 | TE Connectivity | FN5273-B2-A1-100N | 0 | |||
| 1-583616-0 | TE Connectivity | CONT.CRP.SNAP TW.LF. STRIP RoHS : Compliant |
| 0 | ||
| 2326836-1 | TE Connectivity | 5 CAE 84 M320/M425 E200 RoHS : Compliant | 0 | |||
![]() PEI Genesis | GTC08-36-10PW-023 | Amphenol Corporation |
| 0 | ||
| GTC08-36-10PW-023-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-10SX-B30 | Amphenol Corporation |
| 0 | |||
| 21-033836-111 | Amphenol Corporation |
| 0 | |||
| GTS08-36-10P-023-116 | Amphenol Corporation |
| 0 | |||
| GTS08-36-10PW-023 | Amphenol Corporation |
| 0 | |||
| GTS08-36-10SZ | Amphenol Corporation |
| 0 | |||
| GTS08-36-11S-023-116 | Amphenol Corporation |
| 0 | |||
| GTC08-36-10PW-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-11P-023-B30 | Amphenol Corporation |
| 0 | |||
| 159836-144 | SOURIAU-SUNBANK |
| 0 | |||
| 836149054 | Ulti-Mate Connector Inc |
| 0 | |||
| GTC08-36-10PW-LC | Amphenol Corporation |
| 0 | |||
| GTC08-36-10SX-B30-LC | Amphenol Corporation |
| 0 | |||
| GTS08-36-10PY-023 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 100836-1 | TE Connectivity | Connectors |
| 17,119 | |
| 8-36158-1 | TE Connectivity | Terminals RoHS : Compliant |
| 601 | ||
| 68683-613 | Amphenol FCi | Cable Assembly RoHS : Not Compliant |
| 182 | ||
| GTC08-36-10S-023 | Amphenol Corporation | CONNECTOR |
| 115 | ||
| GTC08-36-12S-023-LC | Amphenol Corporation | CONNECTOR |
| 115 | ||
| GTC08-36-10SZ-023 | Amphenol Corporation | CONNECTOR |
| 115 | ||
| GTC08-36-10SZ-023-LC | Amphenol Corporation | CONNECTOR |
| 115 | ||
| 618361-000 | TE Connectivity | Tinel-Lock RoHS : Compliant |
| 18 | ||
| HW483612S16HK | Hammond Manufacturing | N4X-316 48X36X12 W/HDL |
| 5 | ||
| 538361-5 | TE Connectivity | Connectors |
| 3 | ||
| ST483616SS | Hammond Manufacturing | SLOPE TOP 48X36X16 304SS RoHS : Compliant |
| 3 | ||
| PHW483616 | Hammond Manufacturing | 48X36X16 FRP TYPE 4X WLMNT RoHS : Compliant |
| 1 | ||
| 91-542836-11P | Amphenol Corporation | RECEPT |
| 1 | ||
| 91-542836-11Y | Amphenol Corporation | RECEPT |
| 1 | ||
| PJW483614L3PT | Hammond Manufacturing | NON MET WALLMT 48X36X14 3PT |
| 1 | ||
![]() Richardson RFPD | 935285836118 | NXP Semiconductors | Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin TSS RoHS : Compliant |
| 0 | |
| AP836 10R J | Ohmite Mfg Co | Res 10 Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 1K J | Ohmite Mfg Co | Res 1K Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| RP428-36-100-S | Astrodyne TDI Power Supplies & EMI Filters | EMI PWR LINE FILTER RoHS : Compliant | 0 | |||
| SI5341D-D08361-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| AP836 150R F | Ohmite Mfg Co | AP836 150R F RoHS : Compliant |
| 0 | ||
| AP836 100R J | Ohmite Mfg Co | Res 100 Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 1K F | Ohmite Mfg Co | AP836 1K F RoHS : Compliant |
| 0 | ||
| AP836 10K J | Ohmite Mfg Co | Res Thick Film 10K Ohm 5% 35W ±100ppm/C Molded TO- RoHS : Compliant |
| 0 | ||
| R574J83615 | Radiall | SP6Z R 2,4 LSA 28 C+D DS |
| 0 | ||
| AP836 1K5 F | Ohmite Mfg Co | AP836 1K5 F RoHS : Compliant |
| 0 | ||
| AP836 1R J | Ohmite Mfg Co | Res 1 Ohm 5% 35/2.5W Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 10R F | Ohmite Mfg Co | AP836 10R F RoHS : Compliant |
| 0 | ||
| AP836 150R J | Ohmite Mfg Co | Res 150 Ohm 5% 35/2.5W ±100ppm/C Molded TO-220 RDL RoHS : Compliant |
| 0 | ||
| AP836 15R F | Ohmite Mfg Co | AP836 15R F RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 100836-1 | TE Connectivity | INSTOCK | 21,239 | ||
| KP1836-110/135 | Vishay Intertechnologies | INSTOCK | 7,640 | |||
| 7183-6154 | Yazaki Corp | INSTOCK | 6,240 | |||
| 316836-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,000 | |||
| 7183-6153 | INSTOCK | 3,641 | ||||
| KP1836-110/135 | ASIX Electronics Corporation | INSTOCK | 1,500 | |||
| 4782836104440 | TE Connectivity | INSTOCK | 1,420 | |||
AD8361ARM-REEL7![]() | Analog Devices Inc | INSTOCK RoHS : Not Compliant | 828 | |||
| 7283-6175-30 | Yazaki Corp | INSTOCK | 300 | |||
| LM8361 | INSTOCK | 120 | ||||
| 5003836-1 | INSTOCK | 7 | ||||
![]() Avnet Abacus | 836119006 | Molex | Conn Micro D Subminiature Plug 9 POS 127mm Solder RA Through Hole Tube (Alt: 836119006) RoHS : Compliant | 1,664 | ||
| KP1836147135 | Vishay Intertechnologies | KP 1836 470pF 10 1600V (Alt: KP1836147135) RoHS : Compliant | 1,500 | |||
| 836199010 | Molex | (Alt: 836199010) RoHS : Compliant | 220 | |||
| 1836133 | Phoenix Contact | MVSTBR 2517ST508 GY H1L MVSTBR2517ST508GYH1L (Alt: 1836133) RoHS : Compliant | 0 | |||
| 1836134 | Phoenix Contact | (Alt: 1836134) RoHS : Compliant | 0 | |||
| 1783610 | Phoenix Contact | PC 5 4ST1762 BDR1R2UU PC54ST1762BDR1R2UU (Alt: 1783610) RoHS : Compliant | 0 | |||
| 68361-1 | TE Connectivity | (Alt: 68361-1) RoHS : Not Compliant | 0 | |||
| 167836-1 | TE Connectivity | Conn RJ11 F 4 POS Panel Mount 1Port Box (Alt: 167836-1) RoHS : Compliant | 0 | |||
| 836129020 | Molex | Conn Micro D Subminiature Plug 15 POS 127mm Solder Right Angle Through Hole (Alt: 836129020) RoHS : Compliant | 0 | |||
| 836129020 | Molex | Conn Micro D Subminiature Plug 15 POS 127mm Solder Right Angle Through Hole (Alt: 836129020) RoHS : Compliant | 0 | |||
| 1551836-1 | TE Connectivity | (Alt: 1551836-1) RoHS : Compliant | 0 | |||
| 1-583616-0 | TE Connectivity | (Alt: 1-583616-0) RoHS : Compliant | 0 | |||
| 5-583616-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 5-583616-2) RoHS : Compliant | 0 | |||
| A836-1A1T-91B | Bel Fuse | (Alt: A836-1A1T-91B) RoHS : Compliant | 0 | |||
| MAL215836123E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 12000 uF 25 V 20 SnapIn (Alt: MAL215836123E3) RoHS : Compliant | 0 | |||
![]() Avnet Asia | A836-1A1T-91B | Bel Fuse | (Alt: A836-1A1T-91B) RoHS : Compliant | 0 | ||
| 2523836-1 | TE Connectivity | TYPE-C-FEMALE_CONNECTOR_WITH LATCH (Alt: 2523836-1) RoHS : Compliant | 0 | |||
| MAL213836109E3 | Vishay Intertechnologies | Electrolytic Capacitor, 10 uF, 25 V, ? 20%, Axial Leaded, 1000 hours @ 105?C, Polar, Axial Leaded (Alt: MAL213836109E3) RoHS : Compliant | 0 | |||
| 2301836-1 | TE Connectivity | (Alt: 2301836-1) RoHS : Compliant | 0 | |||
| 0836149014 | Molex | (Alt: 0836149014) RoHS : Compliant | 0 | |||
| 0836149016 | Molex | D-Sub Connector, Plug, 25 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Straight, 83614 Series (Alt: 0836149016) RoHS : Compliant | 0 | |||
| 0836119006 | Molex | Conn Micro D Subminiature Plug 9 POS 1.27mm Solder RA Through Hole Tube (Alt: 0836119006) RoHS : Compliant | 0 | |||
| 5188836-1 | TE Connectivity | Conn Daughter Card F 110 POS 2mm Press Fit RA Thru-Hole (Alt: 5188836-1) RoHS : Compliant | 0 | |||
| 0836119016 | Molex | D-Sub Connector, Plug, 9 Contacts, 1.27 mm, Gold, Panel Mount, Right Angle, 83611 Series (Alt: 0836119016) RoHS : Compliant | 0 | |||
| 0836119023 | Molex | D-Sub Connector, Plug, 9 Contacts, 1.27 mm, Gold, Panel Mount, Straight, 83611 Series, -40 to 125 ?C (Alt: 0836119023) RoHS : Compliant | 0 | |||
| 0836129020 | Molex | D-Sub Connector, Plug, 15 Contacts, 2 Rows, 1.27 mm, Gold, Panel Mount, Right Angle, 83612 Series (Alt: 0836129020) RoHS : Compliant | 0 | |||
![]() Avnet Silica | IS61SP12836-166B![]() | Integrated Silicon Solution Inc | (Alt: IS61SP12836-166B) RoHS : Compliant | 0 | ||
| BRKOUT-FXLN8361Q | NXP Semiconductors | Breakout Board for FXLN8361Q NXP Accelerometer (Alt: BRKOUT-FXLN8361Q) RoHS : Compliant | 0 | |||
![]() DB Roberts | 1836-1032-AL-24 | RAF Electronic Hardware | 0 | |||
| TN8-36-1024-2 | Essentra Components | StandoffThrd Fem/MLWht2-1/4 inSpc Standoff Thrd Fem/ML White | 0 | |||
| SOS-83.6-10 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| 2836135-16.D | RAF Electronic Hardware | DFARS Compliant Required | 0 | |||
| SO-83.6-14ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| TN8-36-1024-3 | Essentra Components | StandoffThrd ML/MLWht2-1/4 inSpc Standoff Thrd ML/ML White | 0 | |||
| 1836-1032-A | RAF Electronic Hardware | 0 | ||||
| SOA-83.6-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SO-83.6-12ZI | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOS-83.6-16 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| SOS-83.6-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| RP-348-361 | SHEREX FASTENING SO | 0 | ||||
| SOA-83.6-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
| TN8-36-1024-1 | Essentra Components | StandoffThrd Fem/FemWht2-1/4 inSpc Standoff Thrd Fem/Fem White | 0 | |||
| SOS-83.6-18 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | 0 | |||
![]() EBV Elektronik | TEA18361T/1J![]() | NXP Semiconductors | SMPS Controller IC 14Pin SOIC TR (Alt: TEA18361T/1J) RoHS : Compliant | 0 | ||
| SGM836-1.8XN6G/TR | SG Micro Corp | (Alt: SGM836-1.8XN6G/TR) RoHS : Compliant | 0 | |||
| SGM836-1.2XN6G/TR | SG Micro Corp | (Alt: SGM836-1.2XN6G/TR) RoHS : Compliant | 0 | |||
| SGM836-1.8XTDI6G/TR | SG Micro Corp | (Alt: SGM836-1.8XTDI6G/TR) RoHS : Compliant | 0 | |||
![]() Master Electronics | 1-583616-0 | TE Connectivity | CONT.CRP.SNAP TW.LF. STRIP RoHS : Compliant |
| 12,100 | |
| 8361 | JKL Components Corporation | T-1 3/4 Wire Lead Lamp RoHS : Compliant |
| 60 | ||
| AP836-1K5-F | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| RCV-00108361 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| PHW483616 | Hammond Manufacturing | enclosure - NEMA 4X polyester wallmount RoHS : Compliant |
| 0 | ||
| 7-2836121-7 | TE Connectivity | OC-055F055O-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 7-2836158-7 | TE Connectivity | OC-196F230F-CRIMPTOOLINGKIT RoHS : Not Compliant |
| 0 | ||
| 2836109-1 | TE Connectivity | OC-AT-S-FM-076F144F-112-1457 RoHS : Compliant |
| 0 | ||
| 1836134 | Phoenix Contact | PCB connector - nominal current: 8 A - rated voltage (III/2): 320 V - nominal cross section: 1.5 mm² - number of positions: 8 - pitch: 5.08 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 10208361-00 | TE Connectivity | FN5273-B2-A1-100N RoHS : Compliant |
| 0 | ||
| 538361-5 | TE Connectivity | NETZKABEL RoHS : Compliant |
| 0 | ||
| 68361-1 | TE Connectivity | HYP10 AMPOWER 1/0AWG W/LOCATOR DIE SET MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 7-2836155-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-062F072O RoHS : Not Compliant |
| 0 | ||
| 5-583616-2 | TE Connectivity | CONT.CRP.SNAP TW.LF. STRIP MOQ Reduction RoHS : Compliant |
| 0 | ||
| AP836-10K-J | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 83619-9011 | Molex | D-Sub Micro-D Connectors CMD RA DUAL STACK 25 K 25/30 CIR W/JKPOST RoHS : Compliant |
| 50 | |
| 2583610000 | Weidmüller Interface GmbH & Co. KG | Grommets & Bushings CABTITE SE 2/5-6 SML BK RoHS : Compliant |
| 50 | ||
| P8-361312A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-D RoHS : Compliant |
| 50 | ||
| AP836 1K F | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35 Watts TO-220 Thick Film100 Ohms 5%100PPM |
| 50 | ||
| P8-361212A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-DB RoHS : Compliant |
| 50 | ||
| AP836 150R J | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35W 150 Ohm TO-220 5% tol. |
| 50 | ||
| AP836 1R5 J | Ohmite Mfg Co | Thick Film Resistors - Through Hole 35W 1.5 ohm 5% TO-220 NON INDUCTIVE |
| 50 | ||
| 1836105 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5.08mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 50 | ||
| 2908361 | Phoenix Contact | Industrial & Electrical Fuses FUSE 15A/32V FKS ATO RoHS : Compliant |
| 44 | ||
| FN3298-36-105-C25-R65 | TE Connectivity | Power Line Filters Three Phase (Wye) EMC/EMI Line Filter 36 A 50/60Hz Two Stage Terminal Block |
| 21 | ||
| P8-361211A | OTTO Engineering Inc | Pushbutton Switches Faston/ Black Momtry 10A SPST-DB, SPDT-DB RoHS : Compliant |
| 10 | ||
| 108361A | Amphenol Lutze | Mult-Conductor Control Cable, 18 AWG, 12 Conductor, PVC, Grey, 600V, Unshielded |
| 1 | ||
| 27458.36115 | ebm-papst | Fan Accessories Valve Harness, 24VAC |
| 0 | ||
| AXG98361 | Axiom Manufacturing | AXIOM 50FT CAT6 SHIELDED CABLE - BLUE |
| 0 | ||
| 08361841150 | Altech Corporation | Photoelectric Sensors Opto Sensor KORH120-M18MB63-DPS-V2-RT |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17836-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to TNC Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to TNC male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to TNC male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a TNC cable connection on the other. Our a 2.92mm to a TNC cable assembly has male gender on end 1 and male on end 2. PE3W17836-12 can also be known as a 2.92mm plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17836-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to TNC plug cable assembly PE3W17836-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17836-12 can also be used in the other direction and will be TNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to TNC cable assembly for quick shipment worldwide. Variations of 2.92mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to TNC RF cable assembly as per your requirements. |
| 69 | |
| PE3W17836-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to TNC Male Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to TNC male cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to TNC male cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a TNC cable connection on the other. Our a 2.92mm to a TNC cable assembly has male gender on end 1 and male on end 2. PE3W17836-18 can also be known as a 2.92mm plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17836-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to TNC plug cable assembly PE3W17836-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17836-18 can also be used in the other direction and will be TNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to TNC cable assembly for quick shipment worldwide. Variations of 2.92mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to TNC RF cable assembly as per your requirements. |
| 69 | ||
| PE3C9836-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to Reverse Polarity SMA Plug Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to reverse polarity SMA plug low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to reverse polarity SMA plug low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and reverse polarity SMA cable connection on the other. Our low loss type N to reverse polarity SMA cable assemblies have a female gender on end 1 and plug on end 2. PE3C9836-12 can also be known as a low loss N type jack to reverse polarity SMA male cable assembly and will be shipped same-day as it is purchased. Type N jack to reverse polarity SMA male cable assembly PE3C9836-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2.5 GHz maximum frequency type N female bulkhead to reverse polarity SMA plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9836-12 can also be used in the other direction and will be reverse polarity SMA plug to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to reverse polarity SMA plug low loss cable 12 inch length using TCOM-240 coax with Times Microwave components. |
| 45 | ||
| PE3W12836-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to 2.92mm Male Cable 18 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to 2.92mm male cable 18 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to 2.92mm male cable 18 inch length using PE-047SR coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and 2.92mm cable connection on the other. Our right angle SMP to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. PE3W12836-18 can also be known as a right angle SMP jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP jack to 2.92mm plug cable assembly PE3W12836-18 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12836-18 can also be used in the other direction and will be 2.92mm male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to 2.92mm male cable 18 inch length using PE-047SR coax. |
| 41 | ||
| PE3W12836-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to 2.92mm Male Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and 2.92mm cable connection on the other. Our right angle SMP to 2.92mm cable assemblies have a female gender on end 1 and male on end 2. PE3W12836-12 can also be known as a right angle SMP jack to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP jack to 2.92mm plug cable assembly PE3W12836-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12836-12 can also be used in the other direction and will be 2.92mm male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to 2.92mm male cable 12 inch length using PE-047SR coax. |
| 41 | ||
| PE3C5836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a female to male coax assembly, PE3C5836-12, can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C5836-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5836-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 5 | ||
| PE3C8361 | Pasternack Enterprises | 0 | ||||
| PE3C7836-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7836-150CM, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7836-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7836-150CM can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7836-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7836-100CM, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7836-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7836-100CM can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3836-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3836-18, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3836-18 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3836-18 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 18 inch length using RG316 coax. |
| 0 | ||
| PE3W08361/HS/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Male Right Angle Cable Using RG405 Coax with HeatShrink and 180 Deg. Clock. PE3W08361/HS/PH180 is a Mini SMP female right angle to SMA male right angle cable using RG405 coax. This Pasternack Mini SMP female right angle to SMA male right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Mini SMP right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08361/HS/PH180 Mini SMP female right angle to SMA male right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W08361/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Male Right Angle Cable Using RG405 Coax with HeatShrink. PE3W08361/HS is a Mini SMP female right angle to SMA male right angle cable using RG405 coax. This Pasternack Mini SMP female right angle to SMA male right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Mini SMP right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08361/HS Mini SMP female right angle to SMA male right angle cable assembly is constructed with RG405 coax. | 0 | |||
| PE3C7836-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Male Right Angle Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3C7836-12, can also be known as a low PIM 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C7836-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7836-12 can also be used in the other direction and will be right angle 7/16 DIN male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male right angle low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W18361 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. HN Male Right Angle to N Male Right Angle Cable Using RG223 Coax. PE3W18361 is a HN male right angle to N male right angle cable using RG223 coax. This Pasternack HN male right angle to N male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18361 HN male right angle to N male right angle cable assembly is constructed with RG223 coax. | 0 | |||
| PE34836-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female to SMA Female Cable 18 Inch Length Using PE-SR402AL Coax., Radio frequency assembly SMA female to SMA female cable 18 inch length using PE-SR402AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 18 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE34836-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE34836-18 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 18 inch length using PE-SR402AL coax. |
| 0 | ||
![]() TE Connectivity | 8-36152-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: M3.5 #6 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36152-1 | Internal Number: 8-36152-1 | Alias Number: AMPS-8-0036152-1 | TE Connectivity RoHS : Compliant |
| 5,059 | |
| 8-36160-1 | TE Connectivity | TERMINAL,PIDG R 16-14 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36160-1 | Internal Number: 8-36160-1 | Alias Number: AMPS-8-0036160-1 | TE Connectivity RoHS : Compliant |
| 3,537 | ||
| 2301836-1 | TE Connectivity | AMPL PLUG HD20, VERT, 37P, B/L,4-40 S/LO Number of Positions: 37 Connector & Housing Type: Plug Connector System: Wire-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 4 D-Shaped Connector | 37 Plug Wire-to-Board Board Mount | Part Number: 2301836-1 | Internal Number: 2301836-1 | 4 | TE Connectivity RoHS : Compliant |
| 2,421 | ||
| 8-36154-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36154-1 | Internal Number: 8-36154-1 | Alias Number: AMPS-8-0036154-1 | TE Connectivity RoHS : Compliant |
| 2,176 | ||
| 8-36195-1 | TE Connectivity | SOLIS SPD 22-16COMM 22-18MIL 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Spade Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Spade Terminal | Part Number: 8-36195-1 | Internal Number: 8-36195-1 | Alias Number: AMPS-8-0036195-1 | TE Connectivity RoHS : Compliant |
| 2,150 | ||
| 282836-1 | TE Connectivity | TERMI-BLOK PCB MOUNT 5,0MM PEG Number of Positions: 2 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 2 Header Wire-to-Board .197" | Part Number: 282836-1 | Internal Number: 282836-1 | .197" | TE Connectivity RoHS : Compliant |
| 1,272 | ||
| 8-36149-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .3 – 1.42 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36149-1 | Internal Number: 8-36149-1 | TE Connectivity RoHS : Compliant |
| 983 | ||
| 8-36150-1 | TE Connectivity | PIDG R 22-16 COMM 22-18 MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36150-1 | Internal Number: 8-36150-1 | TE Connectivity RoHS : Compliant |
| 943 | ||
| 8-36151-1 | TE Connectivity | PIDG R 22-16COMM 22-18MIL 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36151-1 | Internal Number: 8-36151-1 | TE Connectivity RoHS : Compliant |
| 413 | ||
| 8-36158-1 | TE Connectivity | TERMINAL,PIDG R 16-14 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: #6 M3.5 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36158-1 | Internal Number: 8-36158-1 | TE Connectivity RoHS : Compliant |
| 296 | ||
| 1757836-1 | TE Connectivity | AMPLIMITE,R/A RCPT ASY,109,ZN,1 Number of Positions: 9 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 D-Shaped Connector | 9 Receptacle Cable-to-Board Board Mount | Part Number: 1757836-1 | Internal Number: 1757836-1 | TE Connectivity RoHS : Compliant |
| 224 | ||
| 2-282836-1 | TE Connectivity | TERMI-BLOK PCB MOUNT 90 20P. Number of Positions: 20 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 20 Header Wire-to-Board .197" | Part Number: 2-282836-1 | Internal Number: 2-282836-1 | .197" | TE Connectivity RoHS : Compliant |
| 203 | ||
| 8-36161-2 | TE Connectivity | TERMINAL,PIDG R 12-10 10 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 2.62 – 6.64 mm² Wire Size: 5180 – 13100 CMA Stud Size: #10 Closed Ring Tongue Terminal 12 – 10 AWG 2.62 – 6.64 mm² 5180 – 13100 CMA | Pidg Ring Tongue Terminal | Part Number: 8-36161-2 | Internal Number: 8-36161-2 | TE Connectivity RoHS : Compliant |
| 163 | ||
![]() Vyrian | 1836134 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,636 | ||
| MAX98361CEWL+ | Analog Devices Inc | CLASS D AUDIO AMPLIFIER RoHS : Compliant | 11,148 | |||
| LT8361HMSE-PBF | Analog Devices Inc | 11,043 | ||||
| 46114-8361 | Molex | Board Connector, 2 Row(s), Female, Straight, Press Fit Terminal, Locking, Black Insulator, Receptacle RoHS : Compliant | 9,980 | |||
AD8361ARTZ-RL7![]() | Analog Devices Inc | Analog Circuit, 1 Func, PDSO6 RoHS : Compliant | 8,391 | |||
| MAL213836109E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 10uF, Through Hole Mount RoHS : Compliant | 7,995 | |||
CS8361YDWFR16G![]() | onsemi | Fixed Positive LDO Regulator, 2 Output, 5V1, 5V2, BIPolar, PDSO16 RoHS : Compliant | 7,558 | |||
| MAX98361AEWL+ | Analog Devices Inc | CLASS D AUDIO AMPLIFIER RoHS : Compliant | 7,367 | |||
| MAX98361AEVSYS#WLP | Analog Devices (Maxim Integrated) | 6,941 | ||||
ADS8361IRHBR![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 2 Func, 4 Channel, Serial Access, CMOS, PQCC32 RoHS : Compliant | 6,395 | |||
| MAX98361CEWL+T | Analog Devices Inc | CLASS D AUDIO AMPLIFIER RoHS : Compliant | 6,363 | |||
AD8361ARM-REEL7![]() | Analog Devices Inc | Analog Circuit, 1 Func, PDSO8 RoHS : Not Compliant | 5,795 | |||
| LT8361EMSE-TRPBF | Analog Devices Inc | 5,546 | ||||
| 55836-1203 | Molex | Telecom and Datacom Connector, 12 Contact(s), Male, Plug RoHS : Compliant | 674 | |||
| 2-282836-1 | Tyco Electronics Amp | Modular Terminal Block, 13.5A, 1.3mm2, 1 Row(s), 1 Deck(s) | 313 | |||
![]() Win Source Electronics | AD8361ART-REEL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ SOT23-6 RoHS : Not Compliant |
| 39,600 | |
| AD8361ARTZ | Analog Devices Inc |
| 32,000 | |||
AD8361ARTZ-RL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ SOT23-6 / RF Detector 2500MHz 6-Pin SOT-23 T/R RoHS : Compliant |
| 29,510 | ||
| LT8361IMSE#PBF | Analog Devices Inc | IC REG BST SEPIC 2A 16MSOP RoHS : Compliant |
| 5,710 | ||
| LT8361IMSE#TRPBF | Analog Devices Inc | IC REG BST SEPIC 2A 16MSOP / Boost, SEPIC Switching Regulator IC Positive Adjustable 1 Output 2A (Switch) 16-TFSOP (0.118", 3.00mm Width), 12 Leads, Exposed Pad RoHS : Compliant |
| 5,540 | ||
AD8361ARMZ![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Compliant |
| 5,000 | ||
AD8361ARM![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Not Compliant |
| 5,000 | ||
AD8361ARMZ-REEL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8MSOP RoHS : Compliant |
| 4,650 | ||
AD8361ARMZ-REEL![]() | Analog Devices Inc | IC RF DETECT 2.5GHZ 8MSOP / RF Detector IC Cellular, CDMA, W-CDMA 2.5GHz 0 ~ 700mV ±0.25dB 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) RoHS : Compliant |
| 4,640 | ||
AD8361ARM-REEL7![]() | Analog Devices Inc | IC PWR DETECTOR 2.5GHZ 8-MSOP RoHS : Not Compliant |
| 4,560 | ||
| LT8361HMSE#TRPBF | Analog Devices Inc | IC REG BST SEPIC ADJ 2A 16MSOP RoHS : Compliant |
| 3,000 | ||
ADS8361IDBQ![]() | Texas Instruments | IC ADC DUAL 16BIT 500KSPS 24QSOP / 4-Channel Dual ADC SAR 500ksps 16-bit Serial 24-Pin SSOP Tube RoHS : Compliant |
| 2,589 | ||
ADS8361IDBQR![]() | Texas Instruments | IC ADC DUAL 16BIT 500KSPS 24QSOP RoHS : Compliant |
| 2,380 | ||
ADS8361IDBQRG4![]() | Texas Instruments | IC ADC DUAL 16BIT 500KSPS 24QSOP RoHS : Compliant |
| 2,340 | ||
| FXLN8361QR1 | Freescale Semiconductor | ACCELEROMETER 2-8G ANALOG 12QFN RoHS : Compliant |
| 2,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |