| Os motores de busca de Datasheet de Componentes eletrônicos |
|
7527G-AF5-R Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() TME | 2675270000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 6.3A; 70V; push-in; wemid; 26AWG÷12AWG; TS35 RoHS : Compliant |
| 15 | |
| 67527 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 3m; stranded; Cu |
| 2 | ||
| NSP-75-27 | Mean Well | Power supply: switching; for building in,modular; 75W; 27VDC RoHS : Compliant |
| 1 | ||
| PFS7527H | Power Integrations | IC: PMIC; PFC controller; 15.8A; 12VDC; eSIP-16D; SMPS RoHS : Compliant |
| 0 | ||
| 21175270000 | HARTING Technology Group | Connector: M17; contact insert; PIN: 8; male; industrial; M17 RoHS : Compliant |
| 0 | ||
| 64.1031-07527 | Stäubli Electrical Connectors | Test lead: single; 60VDC; 30VAC; 19A; banana plug 4mm,both sides |
| 0 | ||
| 75270003 | Stahlwille Tools | Cutters; 150mm; Application: for cutting wire |
| 0 | ||
| 00175270 | GSR | Tap: inch-set; UNF 1 1/8"; fine thread,right hand thread; 12 |
| 0 | ||
| 1875270000 | Weidmüller Interface GmbH & Co. KG | Connector: terminal block; power supply; OMNIMATE; 16A; 320V; LCP RoHS : Compliant |
| 0 | ||
| 66.2017-07527 | Stäubli Electrical Connectors | Test lead: single; 32A; banana plug 4mm,both sides; Urated: 1000V |
| 0 | ||
| 75270002 | Stahlwille Tools | Scissors; for cutting copper and aluminium cables |
| 0 | ||
| 427527 | BBC Cellpack Technology AG | Heat shrink sleeve; glueless,thin walled; 2: 1; 3.2mm; L: 1000mm |
| 0 | ||
| 64.1035-07527 | Stäubli Electrical Connectors | Test lead: single; 60VDC; 30VAC; 32A; banana plug 4mm,both sides |
| 0 | ||
| 66.2010-07527 | Stäubli Electrical Connectors | Test lead: single; 19A; banana plug 4mm,both sides; Urated: 1kV |
| 0 | ||
| GKS-075 277 064 A 0600 | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 3A; Ø: 0.64mm; GKS-075; steel; 0.6N; push-in |
| 0 | ||
![]() Avnet Americas | 2317527-1 | TE Connectivity | Automotive Connector, Wire-to-Board, Nano MQS Series, Straight Header, 12 Contacts, PCB Pin - Tape and Reel (Alt: 2317527-1) RoHS : Not Compliant |
| 2,700 | |
| 644752-7 | TE Connectivity | - Bag (Alt: 644752-7) RoHS : Compliant |
| 119 | ||
| BFC237527472 | Vishay Intertechnologies | - Tape and Reel (Alt: BFC237527472) RoHS : Compliant |
| 0 | ||
| Y0007527R300A0L | VPG Foil Resistors | High Precision Resistor Metal Foil 527.3Ohm 0.05% Bulk - Bulk (Alt: Y0007527R300A0L) RoHS : Not Compliant |
| 0 | ||
| RMK55N2K7527L | Vishay Intertechnologies | - Waffle Pack (Alt: RMK55N2K7527L) RoHS : Not Compliant |
| 0 | ||
| RCWP0575270KFNWB | Vishay Intertechnologies | RCWP-575 270K 1% N T03 - Waffle Pack (Alt: RCWP0575270KFNWB) RoHS : Not Compliant |
| 0 | ||
| RCWP0575274RFMS2 | Vishay Intertechnologies | RCWP-575 274 1% M S83 - Tape and Reel (Alt: RCWP0575274RFMS2) RoHS : Not Compliant |
| 0 | ||
| RCWP057527R0JKWB | Vishay Intertechnologies | RCWP-575 27 5% K T03 - Waffle Pack (Alt: RCWP057527R0JKWB) RoHS : Not Compliant |
| 0 | ||
| RCWP0575270RGKWB | Vishay Intertechnologies | RCWP-575 270 2% K T03 - Waffle Pack (Alt: RCWP0575270RGKWB) RoHS : Not Compliant |
| 0 | ||
| BFC237527153 | Vishay Intertechnologies | - Tape and Reel (Alt: BFC237527153) RoHS : Compliant |
| 0 | ||
| RMB07527R00JA20 | Vishay Intertechnologies | - Ammo Pack (Alt: RMB07527R00JA20) RoHS : Not Compliant |
| 0 | ||
| BFC237527622 | Vishay Intertechnologies | - Tape and Reel (Alt: BFC237527622) RoHS : Compliant |
| 0 | ||
| AISR-875-270M | Abracon Corporation | - Trays (Alt: AISR-875-270M) RoHS : Compliant | 0 | |||
| RMB07527R00JR15 | Vishay Intertechnologies | - Tape and Reel (Alt: RMB07527R00JR15) RoHS : Not Compliant |
| 0 | ||
| RCWP0575274RFMEA | Vishay Intertechnologies | RCWP-575 274 1% M EA e3 - Tape and Reel (Alt: RCWP0575274RFMEA) RoHS : Compliant |
| 0 | ||
![]() Newark | 87527-2 | TE Connectivity | Btb Connector, 2Pos, Header, 1Row; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:2Contacts; Contact Termination Type:Through Hole; Product Range:Ampmodu Mod Ii Series Rohs Compliant: Yes RoHS : Compliant |
| 2,508 | |
| TW-04-08-G-S-175-270 | Samtec Inc | Conn Stack Brd, 2Mm, 4Pos, Hdr; |Samtec, Inc. TW-04-08-G-S-175-270 RoHS : Compliant |
| 864 | ||
| TW-05-08-G-S-175-270 | Samtec Inc | Conn Stack Brd, 2Mm, 5Pos, Hdr; |Samtec, Inc. TW-05-08-G-S-175-270 RoHS : Compliant |
| 734 | ||
| ZW-12-09-G-D-275-275 | Samtec Inc | Conn Stack Brd, 2.54Mm, 24Pos, Hdr; |Samtec, Inc. ZW-12-09-G-D-275-275 RoHS : Compliant |
| 572 | ||
| 2317527-1 | TE Connectivity | Automotive Conn, Hdr, 12Pos, 3A; |Te Connectivity 2317527-1 RoHS : Compliant |
| 540 | ||
| TW-10-10-G-D-175-275 | Samtec Inc | Conn Stack Brd, 2Mm, 20Pos, Hdr; |Samtec, Inc. TW-10-10-G-D-175-275 RoHS : Compliant |
| 201 | ||
| TW-16-10-G-D-175-275 | Samtec Inc | Conn Stack Brd, 2Mm, 32Pos, Hdr; |Samtec, Inc. TW-16-10-G-D-175-275 RoHS : Compliant |
| 144 | ||
| ZW-20-11-T-S-375-275 | Samtec Inc | Conn Stack Brd, 2.54Mm, 20Pos, Hdr; |Samtec, Inc. ZW-20-11-T-S-375-275 RoHS : Compliant |
| 120 | ||
| ZW-50-13-G-S-575-275 | Samtec Inc | Conn Stack Brd, 2.54Mm, 50Pos, Hdr; |Samtec, Inc. ZW-50-13-G-S-575-275 RoHS : Compliant |
| 91 | ||
| TW-20-12-S-D-275-275 | Samtec Inc | Conn Stack Brd, 2Mm, 40Pos, Hdr; |Samtec, Inc. TW-20-12-S-D-275-275 RoHS : Compliant |
| 88 | ||
| ZW-17-14-T-D-875-275 | Samtec Inc | Conn Stack Brd, 2.54Mm, 34Pos, Hdr; |Samtec, Inc. ZW-17-14-T-D-875-275 RoHS : Compliant |
| 84 | ||
| 1757527 | Phoenix Contact | Terminal Block, Header, 8Pos, Tht; |Phoenix Contact 1757527 RoHS : Compliant |
| 11 | ||
| 577527 | Festo | Pneumatic Valve, 500L/Min, G1/8; |Festo 577527 RoHS : Compliant |
| 1 | ||
| FLK-TIS75+ 27HZ | Fluke Corporation | Therm Imager, -20°C, 550°C, 384 X 288; |Fluke Electronics FLK-TIS75+ 27HZ RoHS : Not Compliant |
| 1 | ||
| 7527 | CEC Industries Ltd | S8 12V 1.5A 20Cp Ba15S |Cec Industries 7527 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX17527AATP+ | Analog Devices Inc | 5.5V to 60V, 6A Current-Limite RoHS : Compliant |
| 0 | |
| MAX17527AATP+T | Analog Devices Inc | 5.5V to 60V, 6A Current-Limite RoHS : Compliant |
| 0 | ||
![]() RS | 8207527 | RS Pro | PUSH BUTTON SWITCH 8MM SPST MOMENTARY 30VDC 100MA WHITE ILLUMINATED PCB PINS |
| 74 | |
| 175975-2 (7121286) | TE Connectivity | MULTILOCK 040 II SERIES 20 WAY 2 ROW FEMALE RIGHT ANGLE PCB HOUSING |
| 74 | ||
| 752703000 | C&K Switches | ACCESSORY, CAP, P/B, RND, RED, 8020, 8060, E010, E020, L, TP SERIES |
| 29 | ||
| 7637527 | RS Pro | TERMINAL BLOCK DIN RAIL 2 POSITION FEED-THROUGH 16-6AWG SPRING CLAMP BEIGE |
| 20 | ||
| 66.9575-27 | Stäubli Electrical Connectors | DOLPHIN CLIP, BRASS CONTACT, 32A, BROWN RoHS : Compliant |
| 15 | ||
| QS30EXQ-17527 (17527) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, HP EMITTER, 213M, 10-30VDC, QD, QS30 |
| 9 | ||
| DT50-2B215552 (1075271) | SICK AG | DISTANCE SENSOR, MID-RANGE, 200-30,000 MM, 0.1 RES., 500 HZ, CLASS 1 |
| 8 | ||
| NSP-75-27 | Mean Well | POWER SUPPLY, AC-DC, ENCLOSED, 75W, 85-305VIN, 27VOUT, 2.8A, NSP-75 SERIES RoHS : Compliant |
| 2 | ||
| VM107527AB313B | Norgren | VALVE, NHZU 5/2 SOL/SPR EF PBMO |
| 2 | ||
| FL300-NW-G1-S-FL-8-BZ (912401475274) | Stonco by Signify | FLOODLIGHT, LED, 300W, 80CRI, 4000K, SM, 120-277V, BZ FINISH, STONCO |
| 2 | ||
| 1752783 | RS Pro | DESK TOP POWER ADAPTER C14 15VDC 2A 30W |
| 1 | ||
| 1752795 | RS Pro | DESK TOP POWER ADAPTER C14 15VDC 6A 90W |
| 1 | ||
| XT4LU3175BFF000XXX (1SDA075270R1) | ABB Low Voltage Products and Systems | XT4 250A FRAME 3P THERMAL/MAGNETIC ADJUSTABLE 100K -480V W/O LUGS 175 AMP |
| 1 | ||
| FL150-NW-G1-S-FL-8-BZ (912401475271) | Stonco by Signify | FLOODLIGHT, LED, 150W, 80CRI, 4000K, SM, 120-277V, BZ FINISH, STONCO |
| 1 | ||
| FL200-NW-G1-S-FL-8-BZ (912401475272) | Stonco by Signify | FLOODLIGHT, LED, 200W, 80CRI, 4000K, SM, 120-277V, BZ FINISH, STONCO |
| 1 | ||
![]() Microchip Technology Inc | PIC7527 | Microchip Technology Inc | Power Integrated Circuit _ TO-66, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Bisco Industries | 17W07527 | Micro Plastics Inc | 1,000 | |||
| 545-7527-003 | WASHERS | 23 | ||||
| 67-52-7550 | HEX HEAD CAP SCREWS | 18 | ||||
| MS51575-27 | Richard Manno & Co | 7 | ||||
| 7527645 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
| 19598-75-275 | MISC. INDUSTRIAL HRD | 1 | ||||
| PL75-27 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
![]() Rochester Electronics | FAN7527BMX | onsemi | Power Factor Correction Discontinuous (Transition) 30V 8-SOIC T/R RoHS : Compliant |
| 2,587 | |
UCC27527DSDR![]() | Texas Instruments | Gate Driver IGBT, N-Channel MOSFET 2 Driver Low-Side 8-SON T/R RoHS : Compliant |
| 2,694 | ||
| SN75276P | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 4.75V - 5.25V 8-DIP Tube RoHS : Not Compliant |
| 10,434 | ||
| SN75276D | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant |
| 17,200 | ||
UCC27527DSDT![]() | Texas Instruments | Gate Driver IGBT, N-Channel MOSFET 2 Driver Low-Side 8-SON T/R RoHS : Compliant |
| 1,000 | ||
| SN75276DR | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 4.75V - 5.25V 8-SOIC T/R RoHS : Not Compliant |
| 2,500 | ||
FAN7527BN![]() | Fairchild Semiconductor Corporation | Power Factor Correction Discontinuous (Transition) 30V 8-DIP Tube RoHS : Compliant |
| 100 | ||
KA75270ZTA![]() | Fairchild Semiconductor Corporation | Supervisory Circuit 2.7V TO-226-3 Ammo RoHS : Compliant |
| 69,900 | ||
| LC7527E-E | SANYO Semiconductor Co Ltd | Graphic Equalizer System RoHS : Compliant |
| 6,238 | ||
![]() Sager | 203-11-7527-11 | Sensata Circuit Breakers | Circuit Breakers | 0 | ||
| 229-2-1REC4-37527-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 752704000 | C&K Switches | Switch Bezels / Switch Caps CAP SWITCH .122 PB PLUNGER ORN | 0 | |||
| TW-20-10-F-D-175-275 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 752709000 | C&K Switches | Switch Bezels / Switch Caps CAP SWITCH .122 PB PLUNGER GRAY | 0 | |||
| 9752702017 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752702062 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752717020 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752717057 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752717101 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752717138 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752702036 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752702081 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752702117 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9752717076 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() Coilcraft Direct | SLR1075-271KEC | Coilcraft Inc | Power inductor, shielded, 10% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 112 | |
| SLC1175-271MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MAX17527AATP+T | Analog Devices Inc | RoHS : Compliant | 83 | ||
![]() ComSIT USA | 23175271 | TE Connectivity | AVAILABLE EU | 53,975 | ||
![]() ComSIT USA | MFRX375270 | Bourns Inc | PTC RESETTABLE FUSE PTC Resettable Fuse, 60V, 0.03ohm, Through Hole Mount RoHS : Compliant | 406 | ||
| 621775273 | TE Connectivity | RECT CONN HSNG Housing for Female Insert Female Socket Free Hanging (In-Line) 48 POS 2.54mm RoHS : Not Compliant | 243 | |||
| UPD7527ACU222 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 106 | |||
| HS7527KJ | ineltro | Fixed Resistor, Wire Wound, 75W, 27000ohm, 1400V, 5% +/-Tol, 25ppm/Cel RoHS : Compliant | 81 | |||
![]() Interstate Connecting Components | EE7527-000 | TE Connectivity | BAH-036010083 | 0 | ||
| 767527-1 | TE Connectivity | SLITTING TOOL STANDARD RoHS : Compliant |
| 0 | ||
| 7-2151752-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-083F0 |
| 0 | ||
| 1-1617752-7 | TE Connectivity | FCA-210-EY6 RoHS : Compliant |
| 0 | ||
| 7527645 | Amphenol Industrial Operations | 0 | ||||
| 9-1372752-7 | TE Connectivity | TOOL BASE |
| 0 | ||
| 6-1617527-6 | TE Connectivity | B07D034BD2-0130=M5757/23-020 RoHS : Not Compliant |
| 0 | ||
| 1752763-1 | TE Connectivity | GUIDE, REAR STRIP |
| 0 | ||
| 237-527-H7ZL15-19DD-V | Glenair Inc | 237-527-H7ZL15-19DD-V | 0 | |||
| 237-527-H7ZL15-35DB-C | Glenair Inc | 237-527-H7ZL15-35DB-C | 0 | |||
| 121617-5274 X | ITT Interconnect Solutions | VG95328J12-10PXJ | 0 | |||
| 1-1372752-7 | TE Connectivity | TOOL BASE | 0 | |||
| 1752745-1 | TE Connectivity | INSERTER,SIAMEZE |
| 0 | ||
| 237-527-H7ZL17-35DA-C | Glenair Inc | 237-527-H7ZL17-35DA-C | 0 | |||
| 121617-5278 | ITT Interconnect Solutions | VG95328C16-8SNJ | 0 | |||
![]() PEI Genesis | 806752-79 | SOURIAU-SUNBANK |
| 0 | ||
| 7527645 | SOURIAU-SUNBANK |
| 0 | |||
| X22217527 | E-T-A |
| 0 | |||
| 806752-76 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-75 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-70 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-71 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-77 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-7 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-74 | SOURIAU-SUNBANK |
| 0 | |||
| 7032-7527 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 806752-78 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-73 | SOURIAU-SUNBANK |
| 0 | |||
| 806752-72 | SOURIAU-SUNBANK |
| 0 | |||
| 00175270002 | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | 175271-1 | TE Connectivity | Connectors RoHS : Compliant |
| 18,480 | |
| 2298752-7 | TE Connectivity | Connectors RoHS : Compliant |
| 4,805 | ||
| 4-2177527-6 | TE Connectivity | Connectors |
| 925 | ||
| TW-04-08-G-S-175-270 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 570 | ||
| TW-05-08-G-S-175-270 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 484 | ||
| 1752750001 | TE Connectivity | System 6 |
| 250 | ||
| TW-10-10-G-D-175-275 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 133 | ||
| ZW-20-11-T-S-375-275 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 79 | ||
| TW-20-12-S-D-275-275 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 58 | ||
| ZW-17-14-T-D-875-275 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 55 | ||
| 2-1617527-3 | TE Connectivity | Relays RoHS : Not Compliant |
| 6 | ||
| 7-1617527-0 | TE Connectivity | Connectors |
| 1 | ||
| 7-1617527-8 | TE Connectivity | Connectors RoHS : Not Compliant |
| 1 | ||
| 1752766-4 | TE Connectivity | Tools |
| 1 | ||
| 1752766-6 | TE Connectivity | Tools |
| 1 | ||
![]() Chip 1 Exchange | 2238-869-75279 | INSTOCK | 8,000 | |||
| FAN7527BMX | INSTOCK | 2,526 | ||||
| FAN75278N | INSTOCK | 10 | ||||
![]() Avnet Abacus | 1757527 | Phoenix Contact | Terminal Block Header 5 mm 8 Ways 15 A 300 V Through Hole Right Angle (Alt: 1757527) RoHS : Compliant | 100 | ||
| 10717527 | Aptiv PLC | (Alt: 10717527) RoHS : Compliant | 0 | |||
| 1897527-1 | TE Connectivity | (Alt: 1897527-1) RoHS : Compliant | 0 | |||
| 1752750001 | TE Connectivity | (Alt: 1752750001) RoHS : Compliant | 0 | |||
| 1-530752-7 | TE Connectivity | (Alt: 1-530752-7) RoHS : Compliant | 0 | |||
| 752743-000 | TE Connectivity | (Alt: 752743-000) RoHS : Compliant | 0 | |||
| 7-2151752-7 | TE Connectivity | (Alt: 7-2151752-7) RoHS : Not Compliant | 0 | |||
| 1-1617752-7 | TE Connectivity | (Alt: 1-1617752-7) RoHS : Not Compliant | 0 | |||
| 5-1617527-0 | TE Connectivity | (Alt: 5-1617527-0) RoHS : Not Compliant | 0 | |||
| 1-1617527-3 | TE Connectivity | (Alt: 1-1617527-3) RoHS : Not Compliant | 0 | |||
| 6-1617527-6 | TE Connectivity | (Alt: 6-1617527-6) RoHS : Not Compliant | 0 | |||
| 2-1617527-4 | TE Connectivity | (Alt: 2-1617527-4) RoHS : Not Compliant | 0 | |||
| B40921A7527M | TDK Corporation | 520uF35V10x125mm SE SMD HP (Alt: B40921A7527M000) RoHS : Not Compliant | 0 | |||
| RCWP0575270KFNWB | Vishay Intertechnologies | (Alt: RCWP0575270KFNWB) RoHS : Compliant | 0 | |||
| TW-10-10-G-D-175-275 | Samtec Inc | (Alt: TW-10-10-G-D-175-275) RoHS : Compliant | 0 | |||
![]() Avnet Asia | C10-752785-130 | Amphenol Corporation | SLPIPA16BSB (Alt: C10-752785-130) RoHS : Compliant | 0 | ||
| C10-752785-030 | Amphenol Corporation | SLPIPA16BSO (Alt: C10-752785-030) RoHS : Compliant | 0 | |||
| 10197527-J0020YYLF | Amphenol Corporation | (Alt: 10197527-J0020YYLF) RoHS : Compliant | 0 | |||
| 10170775-27A401 | Amphenol Corporation | ORV3 AC INPUT ASM RIGHT-EU 10AWG 215MM (Alt: 10170775-27A401) RoHS : Compliant | 0 | |||
| 675273-000 | TE Connectivity | (Alt: 675273-000) RoHS : Compliant | 0 | |||
![]() Avnet Silica | C17527_DAISY-28X1-SHD-MET | LEDIL | Linear LED Lens Shade Rectangular 28 Position 1140mm x 40mm (Alt: C17527_DAISY-28X1-SHD-MET) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | ELM7527CBB-S | ELM Technology Corp | IN STOCK SHIP TODAY | 3,000 | ||
| 3-1437527-4 | TE Connectivity | IN STOCK SHIP TODAY | 1,500 | |||
| 175-272-JB | RCD Components Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 78 | ||
| 752702000 | C&K Switches | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
![]() DB Roberts | 17W07527 | Essentra Components |
| 3 | ||
| SPL17527ST08 | Spiralock | 7/16-20 SPL 4STFL GP B TIN | 0 | |||
| 7527-D-1032-B | RAF Electronic Hardware | 0 | ||||
| SPL17527 | Spiralock | 7/16-20SPL 4StFl GP B Nit | 0 | |||
| 497527 | Essentra Components | 0 | ||||
| F7-527 | Southco | 0 | ||||
| 7527-B-632-B | RAF Electronic Hardware | 0 | ||||
| 17W07527B | Essentra Components | FLAT WASHER, .375 ID, .750 OD, | 0 | |||
| 1347527 | Essentra Components | 0 | ||||
![]() EBV Elektronik | PFS7527H | Power Integrations | (Alt: PFS7527H) RoHS : Compliant | 0 | ||
| C17527_DAISY-28X1-SHD-MET | LEDIL | Linear LED Lens Shade Rectangular 28 Position 1140mm x 40mm (Alt: C17527_DAISY-28X1-SHD-MET) RoHS : Compliant | 0 | |||
![]() FDH Electronics | PL75-27 | Cinch Connectivity Solutions | RF / Coaxial |
| 1 | |
| 7032-7527 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
![]() Master Electronics | 10-752785-200 | Amphenol Commercial | SurLok Plus® 8.0mm RADSOK power connector receptacle with screw and busbar termination options for high-voltage DC applications. RoHS : Compliant |
| 100 | |
| SP-75-27 | Mean Well | AC/DC Power Supply - 1 Output - 27V@2.8A - 75.6W RoHS : Compliant |
| 4 | ||
| 7527 | Simpson Electric | RoHS : Not Compliant |
| 1 | ||
| 1752727-1 | TE Connectivity | SHEAR PUNCH UPPER LEFT RoHS : Compliant |
| 0 | ||
| 121575-2748 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 24-9 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121575-2793 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-3 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 752704000 | C&K Switches | Switch Access Push Button Switch Round Cap RoHS : Compliant |
| 0 | ||
| TW-20-10-F-D-175-275 | Samtec Inc | Conn Board Stacker HDR 40 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 752709000 | C&K Switches | Switch Access Push Button Switch Round Cap RoHS : Compliant |
| 0 | ||
| 767527-1 | TE Connectivity | SLITTING TOOL STANDARD RoHS : Compliant |
| 0 | ||
| 121575-2735 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 14S-4 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 023307527 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| LMLB1-1RLS4R-40752-70-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| 121575-2779 | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 18-3 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 097527-0006 | ITT Interconnect Solutions | Cable Assembly RG178/U 0.012m 25AWG 37 POS Micro D-Sub PIN Crimp RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 4752.7200 | Schurter Electronic Components | Heavy Duty Power Connectors 4752 QUADBLOC 10A 70 RoHS : Compliant |
| 50 | |
| NSP-75-27 | Mean Well | Switching Power Supplies 75.6W 27V 2.8A 85-305Vac W/PFC ITE 62368-1, Medical 60601-1, Industrial 61558-1/2-16/61010-1 RoHS : Compliant |
| 15 | ||
| QS30EXQ-17527 | Banner Engineering Corp | High-Powered Emitter, R: 213 m, 10-30Vdc, QDM12, 17527 |
| 10 | ||
| RSP-75-27 | Mean Well | Switching Power Supplies 75.6W 27V 2.8A, PFC, Free air, Adj Output, Enclosed, Input: 85 ~ 264 VAC, 120 ~ 370 VDC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE37527 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable Using 75 Ohm RG179 Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE37527 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE37527 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37527 RF cable are available on our downloadable PDF datasheet.PE37527 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. | 1,225 | ||
| PE37527-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. BNC Male Right Angle to BNC Female Bulkhead Cable 36 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable 36 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable 36 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE37527-36 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE37527-36 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37527-36 RF cable are available on our downloadable PDF datasheet.PE37527-36 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 245 | ||
| PE37527-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. BNC Male Right Angle to BNC Female Bulkhead Cable 24 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable 24 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable 24 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE37527-24 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE37527-24 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37527-24 RF cable are available on our downloadable PDF datasheet.PE37527-24 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 245 | ||
| PE37527-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. BNC Male Right Angle to BNC Female Bulkhead Cable 72 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE37527-72 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE37527-72 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37527-72 RF cable are available on our downloadable PDF datasheet.PE37527-72 can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 245 | ||
| PE3C7527-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 48 Inch Length Using PE-P086 Coax., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 48 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA female bulkhead cable 48 inch length using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C7527-48 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C7527-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7527-48 can also be used in the other direction and will be SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA female bulkhead cable 48 inch length using PE-P086 coax. |
| 0 | ||
| PE3C7527-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using PE-P086 Coax., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C7527-6 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C7527-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7527-6 can also be used in the other direction and will be SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax. |
| 0 | ||
| PE3C7527/HS2-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-24 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-24 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-24 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-6 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-6 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-6 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7527-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C7527-24 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C7527-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7527-24 can also be used in the other direction and will be SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA female bulkhead cable 24 inch length using PE-P086 coax. |
| 0 | ||
| PE3C7527 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Female Bulkhead Cable Using PE-P086 Coax., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA female bulkhead cable using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C7527 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C7527 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7527 can also be used in the other direction and will be SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA female bulkhead cable using PE-P086 coax. | 0 | |||
| PE3C7527/HS | Pasternack Enterprises | 0 | ||||
| PE3C7527/HS2-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 48 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 48 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 48 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-48 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-48 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-48 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17527 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to N Female 4 Hole Flange Cable Using LMR-195 Coax. PE3W17527 is a reverse polarity TNC male right angle to N female 4 hole flange cable using LMR-195 coax. This Pasternack reverse polarity TNC male right angle to N female 4 hole flange cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17527 TNC reverse polarity male right angle to N female 4 hole flange cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33752-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male Right Angle to BNC Male Right Angle Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to BNC male right angle cable 72 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to BNC male right angle cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our right angle SMA to right angle BNC cable assembly has male gender on end 1 and male on end 2. PE33752-72 can also be known as a right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. SMA plug to BNC plug cable assembly PE33752-72 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33752-72 RF cable are available on our downloadable PDF datasheet.PE33752-72 can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7527-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using PE-P086 Coax., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 12 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA female bulkhead cable 12 inch length using PE-P086 coax, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3C7527-12 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA jack cable assembly PE3C7527-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7527-12 can also be used in the other direction and will be SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA female bulkhead cable 12 inch length using PE-P086 coax. |
| 0 | ||
![]() TE Connectivity | 644752-7 | TE Connectivity | 07P MTA156 HDR ASSY SQ STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 1,063 | |
| 1-644752-7 | TE Connectivity | 17P MTA156 HDR ASSY SQ STR F/L PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 17 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 17 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 487 | ||
![]() Vyrian | 1975273 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 3,700 | ||
| 1775275 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 3,150 | |||
| SN75276CD | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8 | 710 | |||
| PIC7527 | Microchip Technology Inc | RoHS : Not Compliant | 500 | |||
| AD7527GLN | Analog Devices Inc | D/A Converter, 1 Func, PDIP28 RoHS : Not Compliant | 330 | |||
| AD7527BD/883B | Analog Devices Inc | D/A Converter, 1 Func, CDIP28 RoHS : Not Compliant | 320 | |||
| AD7527TD/883B | Analog Devices Inc | D/A Converter, 1 Func, CDIP28 RoHS : Not Compliant | 280 | |||
| AD7527KN | Analog Devices Inc | D/A Converter, 1 Func, PDIP28 RoHS : Not Compliant | 260 | |||
| AD7527UD | Analog Devices Inc | D/A Converter, 1 Func, CDIP28 RoHS : Not Compliant | 210 | |||
| AD7527TD | Analog Devices Inc | D/A Converter, 1 Func, CDIP28 RoHS : Not Compliant | 210 | |||
| AD7527LN | Analog Devices Inc | D/A Converter, 1 Func, PDIP28 RoHS : Not Compliant | 210 | |||
| AD7527GCD/883B | Analog Devices Inc | D/A Converter, 1 Func, CDIP28 RoHS : Not Compliant | 180 | |||
| 5962-9752701QKX | Texas Instruments | Bus Driver, CBT/FST/QS/5C/B Series, 2-Func, 5-Bit, True Output, CMOS, CDFP24 | 95 | |||
| 5962-9752701QKA | Texas Instruments | Bus Driver, CBT/FST/QS/5C/B Series, 2-Func, 5-Bit, True Output, CMOS, CDFP24 RoHS : Not Compliant | 76 | |||
| 7C1-675272000302943 | Intel Corporation | 44 | ||||
![]() Win Source Electronics | CSD17527Q5A![]() | Texas Instruments | MOSFET N-CH 30V 65A 8SON RoHS : Compliant |
| 27,400 | |
FAN7527BMX![]() | Fairchild Semiconductor Corporation | IC PFC CTRLR TRANSITION 8SOIC RoHS : Compliant |
| 19,305 | ||
FAN7527BN![]() | Fairchild Semiconductor Corporation | IC PFC CTRLR TRANSITION 8DIP RoHS : Compliant |
| 2,400 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |