75185-P20-R Price, Revenda, Stock

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

8751-8-15

HeliCoil

5677-PH-312-075-187

RAF Electronic Hardware

EBV Elektronik

ST75185CTR

STMicroelectronics

RS232 Transceiver 3 Drivers 5 Receivers 75V to 15V Supply TSSOP20 (Alt: ST75185CTR)
RoHS : Compliant

BMA7518SAIAE

NXP Semiconductors

LQFP64 A Advanced battery cell controller (Alt: BMA7518SAIAE)
RoHS : Compliant

NCV7518MWATXG

onsemi

FLEXMOS Hex Lowside MOSFET Predriver (Alt: NCV7518MWATXG)
RoHS : Compliant

MIC3975-1.8YMM

Microchip Technology Inc

(Alt: MIC3975-1.8YMM)
RoHS : Compliant

MBMA7518SAIAER2

NXP Semiconductors

BMS2BCC18LIGHT (Alt: MBMA7518SAIAER2)
RoHS : Compliant

GP.1575.18.4.A.02

Taoglas Antenna Solutions

Patch Antenna Single Band Right Hand Circular 1575 GHz Adhesive Pin (Alt: GP.1575.18.4.A.02)
RoHS : Compliant

GP.1575.18.2.A.02

Taoglas Antenna Solutions

Patch Antenna Single Band Right Hand Circular 1575 GHz Adhesive Pin (Alt: GP.1575.18.2.A.02)
RoHS : Compliant

SGP.1575.18.4.C.02

Taoglas Antenna Solutions

Patch Antenna Single Band Right Hand Circular 1575 GHz Surface Mount (Alt: SGP.1575.18.4.C.02)
RoHS : Compliant

DSGP.1575.18.2.A.02

Taoglas Antenna Solutions

(Alt: DSGP.1575.18.2.A.02)
RoHS : Compliant

DSGP.1575.18.4.A.02

Taoglas Antenna Solutions

RF Antenna 15743 to 15764GHz GPS Galileo 42dBi 50 ohm (Alt: DSGP.1575.18.4.A.02)
RoHS : Compliant

Master Electronics

AP7-1R-37518-13

Sensata Circuit Breakers

Hydraulic Magnetic Circuit Breaker 1 Pole AP7 Series | Sensata - Airpax AP7-1R-37518-13
RoHS : Not Compliant

3 : $662.04
1 : $680.69

121575-1807

ITT Interconnect Solutions

Circular Connector - Straight Plug - Contact Arrangement: 14SA7 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing
RoHS : Compliant

100 : $44.01
75 : $44.9
50 : $63.81
25 : $120.53

121575-1865-A

ITT Interconnect Solutions

CA06PG24A24S-B-01-F0; CA Bayonet; Circular
RoHS : Not Compliant

100 : $73.82
75 : $75.33
50 : $109.53
25 : $207.54

7518A3811-0

TE Connectivity

7518A3811-0 MOQ Reduction
RoHS : Compliant

5,000 : $6.37
3,750 : $6.5
2,500 : $9.54
1,250 : $18.69

775180-001

TE Connectivity

22759/32-24-8 MOQ Reduction
RoHS : Compliant

5,000 : $0.3223
3,750 : $0.3289
2,500 : $0.4155
1,250 : $0.6751

FW-19-05-F-D-375-188

Samtec Inc

RoHS : Compliant

5,000 : $2.27
2,500 : $2.78
1,000 : $3.35
500 : $3.64
250 : $4.66
100 : $4.87
25 : $5.26
5 : $6.27

FW-21-05-F-D-475-188

Samtec Inc

RoHS : Compliant

5,000 : $1.97
2,500 : $2.69
1,000 : $3.44
500 : $3.82
250 : $5.14
100 : $5.37
25 : $5.81
5 : $6.92

FW-37-05-F-D-375-188

Samtec Inc

RoHS : Compliant

1,000 : $4.41
500 : $5.67
250 : $6.12
100 : $6.67
50 : $8.61
25 : $9.02
5 : $9.95

FFSD-05-S-75.18-01-N

Samtec Inc

RoHS : Compliant

250 : $13.11
100 : $13.95
50 : $19.75
25 : $20.34
10 : $20.97
5 : $21.98
1 : $23.5

FW-02-03-S-D-175-183

Samtec Inc

RoHS : Compliant

10,000 : $0.572
7,500 : $0.573
5,000 : $0.589
2,500 : $0.726
1,000 : $0.814
500 : $1.104
250 : $1.156
25 : $1.423

7518A0811-0

TE Connectivity

Triaxial Cable Tape/Braid Rayfoam 18AWG 12.06mm Black MOQ Reduction
RoHS : Compliant

2,500 : $11.0
1,875 : $11.23
1,250 : $16.49
625 : $32.29

675187-000

TE Connectivity

D-621-0455-L
RoHS : Not Compliant

5 : $304.79
3 : $306.81
1 : $308.89

121575-1826-A

ITT Interconnect Solutions

Circular Connector - Straight Plug - Contact Arrangement: 36A46 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing
RoHS : Not Compliant

100 : $182.64
75 : $186.37
50 : $273.79
25 : $536.05

ZW-02-12-T-S-675-180

Samtec Inc

FLEXIBLE BOARD STACKING H
RoHS : Compliant

100,000 : $0.08
50,000 : $0.0821
25,000 : $0.0842
10,000 : $0.0869
5,000 : $0.089
2,500 : $0.1053
1,000 : $0.123
250 : $0.1452

7-51863-0

TE Connectivity

RoHS : Compliant

25,000 : $0.2161
10,000 : $0.2354
5,000 : $0.2472
1,000 : $0.265
500 : $0.619
100 : $0.651
50 : $0.692
40 : $0.729

Pasternack Enterprises US

PE39475-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to TNC Female Bulkhead Semi-Flexible Precision Cable 18 Inch Length Using PE-SR405FL Coax, LF Solder, RoHS., Radio frequency assembly SMA male to TNC female bulkhead semi-flexible precision cable 18 inch length using PE-SR405FL coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC female bulkhead semi-flexible precision cable 18 inch length using PE-SR405FL coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and TNC bulkhead cable connection on the other. Our precision SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to TNC cable is a male to female coax assembly, PE39475-18, can also be known as a precision SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE39475-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39475-18 can also be used in the other direction and will be TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. Precision SMA plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC female bulkhead semi-flexible precision cable 18 inch length using PE-SR405FL coax, LF solder, RoHS.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

821

PE3075-18

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly BNC male to BNC male cable 18 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 18 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3075-18, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3075-18 is built with RG59 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch length using 75 Ohm RG59 coax.

1 : $43.69
25 : $41.51
50 : $39.32
100 : $37.57

646

PE3W12875-180

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-FR Coax., Radio frequency assembly fire rated N male to N male low loss cable 180 inch length using LMR-600-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 180 inch length using LMR-600-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12875-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12875-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12875-180 is built with LMR-600-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $252.99
10 : $242.87
25 : $232.75
100 : $222.63

162

PE3C3675-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly N male to N male cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C3675-18 can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C3675-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 18 inch length using PE-SR402FLJ coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3W03175-18

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 18 inches. TNC Female Bulkhead to SMA Male Right Angle Cable 18 Inch Using PE-SR405FLJ Coax., Radio frequency assembly TNC female bulkhead to SMA male right angle cable 18 inch using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMA male right angle cable 18 inch using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle SMA cable connection on the other. Our TNC to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This TNC to SMA cable is a female to male coax assembly, PE3W03175-18, can also be known as a TNC jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC jack to SMA plug cable assembly PE3W03175-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03175-18 can also be used in the other direction and will be right angle SMA male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMA male right angle cable 18 inch using PE-SR405FLJ coax.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

PE3M0075-18

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 N Female to TNC Male Cable 18 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N female to TNC male cable 18 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to TNC male cable 18 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 N type to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 type N cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/02-0503 type N to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 N type to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0075-18, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly PE3M0075-18 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 N type to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 type N female to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0075-18 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 N type jack to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to TNC male cable 18 inch length using M17/128-RG400 coax.

1 : $192.99
25 : $183.34
50 : $173.69

PE3775-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Male Right Angle Cable 18 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3775-18, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3775-18 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 18 inch length using RG174 coax.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE34175-18

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Length Using PE-SR401AL Coax., Radio frequency assembly BNC male to BNC male cable 18 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 18 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34175-18, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34175-18 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch length using PE-SR401AL coax.

1 : $231.99
25 : $220.39
50 : $208.79

PE3W17518

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Right Angle Cable Using TCOM-240 Coax. PE3W17518 is a N male right angle to SMA male right angle cable using TCOM-240 coax. This Pasternack N male right angle to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17518 N male right angle to SMA male right angle cable assembly is constructed with TCOM-240 coax.

PE3C10075-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Female Bulkhead to TNC Male Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female bulkhead to TNC male cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female bulkhead to TNC male cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm bulkhead cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has female gender on end 1 and male on end 2. PE3C10075-18 can also be known as a 3.5mm jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to TNC plug cable assembly PE3C10075-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10075-18 can also be used in the other direction and will be TNC male to 3.5mm female bulkhead cable assembly if the opposite connectivity is required. 3.5mm jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $515.99
25 : $490.19
50 : $464.39
100 : $443.75

PE34275-18

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 18 inches. TNC Male to TNC Male Cable 18 Inch Length Using PE-SR401AL Coax., Radio frequency assembly TNC male to TNC male cable 18 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 18 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE34275-18, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE34275-18 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 18 inch length using PE-SR401AL coax.

1 : $216.99
25 : $206.14
50 : $195.29

PE3C7518

Pasternack Enterprises

PE3W07518

Pasternack Enterprises

PE3W07518LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Push-On SMP Female to SMA Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This SMP to SMA cable is a female to male coax assembly, PE3W07518LF/HS, can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W07518LF/HS is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07518LF/HS can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder.

PE3M0175-18

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 18 inches. Temperature Conditioned N Male to N Female Bulkhead Low Loss Cable 18 Inch Length Using PE-P142LL Coax., Pasternack temperature conditioned N male to N female bulkhead low loss cable 18 inch length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0175-18 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with N type connection on one end and type N connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly. PE3M0175-18 can also be known as a temperature conditioned low loss N type plug to type N jack cable assembly and will be shipped the same day after it is purchased. N type plug to type N jack cable assembly PE3M0175-18 is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency N type male to type N female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0175-18 can be used in the other direction and will be N type female to type N male cable assembly. Pasternack high reliability low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for same-day shipment worldwide. Variations of PE44825 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male to N female bulkhead low loss cable 18 inch length using PE-P142LL coax.

1 : $781.99
25 : $742.89
50 : $703.79
100 : $672.51

Vyrian

SN75183NP3

Texas Instruments

Line Driver/Receiver, 2 Driver, BIPolar, PDIP14
RoHS : Not Compliant

9,519

SN75188D-00

Texas Instruments

Line Driver, 1 Func, 4 Driver, BIPolar, PDSO14

8,212

NMUX27518EPWJ

Nexperia

RoHS : Compliant

7,773

SN75182JP4

Texas Instruments

Line Driver/Receiver, BIPolar, CDIP14
RoHS : Not Compliant

7,578

SN75183DE4

Texas Instruments

Line Driver, 2 Func, 2 Driver, BIPolar, PDSO14
RoHS : Compliant

7,554

SN75183NSRG4

Texas Instruments

Line Driver, 2 Func, 2 Driver, BIPolar, PDSO14
RoHS : Compliant

6,344

UCC27518DBV

Texas Instruments

Buffer/Inverter Based MOSFET Driver, 4A, PDSO5

5,729

2775184

Phoenix Contact

Modular Terminal Block, 6mm2, 2 Row(s), 2 Deck(s)
RoHS : Compliant

5,245

SN75188DG4

Texas Instruments

Line Driver, 4 Func, 4 Driver, BIPolar, PDSO14
RoHS : Compliant

4,902

SN75182N-00

Texas Instruments

Line Receiver, 2 Func, 1 Rcvr, BIPolar, PDIP14

4,744

SN75185NE4

Texas Instruments

Line Transceiver, 3 Func, 3 Driver, 5 Rcvr, BIPolar, PDIP20
RoHS : Compliant

3,791

SN75189AJP4

Texas Instruments

Line Driver/Receiver, BIPolar, CDIP14
RoHS : Not Compliant

3,769

SN75189ANSE4

Texas Instruments

Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDSO14
RoHS : Compliant

3,596

SN75189JP4

Texas Instruments

Line Driver/Receiver, BIPolar, CDIP14
RoHS : Not Compliant

3,494

SN75188NSRG4

Texas Instruments

Line Driver, 4 Func, 4 Driver, BIPolar, PDSO14
RoHS : Compliant

3,115

Win Source Electronics

TS3A27518ERTWR

Texas Instruments

IC MUX/DEMUX 6X1 24WQFN
RoHS : Compliant

270 : $1.1182
215 : $1.1637
170 : $1.2091
120 : $1.3
75 : $1.3455
35 : $1.4364

54,000

TS3A27518EPW

Texas Instruments

Analog multiplexe with 1.8-V compatible control

545 : $0.5549
435 : $0.5775
335 : $0.6
235 : $0.6452
150 : $0.6677
75 : $0.7128

49,990

TS3A27518EPWR

Texas Instruments

IC MUX/DEMUX HEX 1X2 24TSSOP
RoHS : Compliant

575 : $0.5229
430 : $0.5832
335 : $0.6033
245 : $0.6235
160 : $0.6436
65 : $0.7843

45,930

UCC27518DBVT

Texas Instruments

IC GATE DVR LOW SIDE 1CH SOT23-5
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

40,850

UCC27518DBVR

Texas Instruments

Single Channel High-Speed, Low-Side Gate Driver | IC GATE DVR LOW SIDE 1CH SOT23-5
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

40,620

TS3A27518ETRTWRQ1

Texas Instruments

IC MUX/DEMUX 1X2 24WQFN
RoHS : Compliant

460 : $0.6523
370 : $0.6788
285 : $0.7054
200 : $0.7584
130 : $0.7849
60 : $0.8379

33,000

TS3A27518EIRTWRQ1

Texas Instruments

IC MUX/DEMUX 1X2 24WQFN
RoHS : Compliant

235 : $1.2833
175 : $1.4313
140 : $1.4807
100 : $1.53
65 : $1.5794
30 : $1.9249

28,941

SN75189AD

Texas Instruments

IC QUAD LINE RECEIVER 14-SOIC
RoHS : Compliant

1,045 : $0.3223
780 : $0.3596
605 : $0.372
440 : $0.3844
285 : $0.3968
120 : $0.4835

21,790

ST75185CTR

STMicroelectronics

IC DRVR/RCVR MULT RS-232 20TSSOP
RoHS : Compliant

440 : $0.6824
330 : $0.7611
255 : $0.7873
185 : $0.8136
120 : $0.8398
50 : $1.0235

15,000

SN75189ADR

Texas Instruments

IC QUAD LINE RECEIVER 14-SOIC
RoHS : Compliant

990 : $0.3037
740 : $0.3387
575 : $0.3504
415 : $0.362
270 : $0.3737
110 : $0.4555

10,000

SN75189ADRG4

Texas Instruments

IC QUAD LINE RECEIVER 14-SOIC
RoHS : Compliant

830 : $0.4069
620 : $0.4538
480 : $0.4695
350 : $0.4851
225 : $0.5008
95 : $0.6103

10,000

SN75189AN

Texas Instruments

IC QUAD LINE RECEIVER 14SO
RoHS : Compliant

480 : $0.6304
360 : $0.7031
275 : $0.7274
200 : $0.7516
130 : $0.7759
55 : $0.9456

9,000

SN75189N

Texas Instruments

IC QUAD LINE RECEIVER 14-DIP
RoHS : Compliant

955 : $0.3153
715 : $0.3516
550 : $0.3638
400 : $0.3759
260 : $0.388
110 : $0.4729

3,523

75185-P20-R Revenda

Ligação URL