705-2R2M-R Price, Revenda, Stock

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. BNC Male to SMA Male Cable 50 cm Length Using RG188 Coax., Radio frequency assembly BNC male to SMA male cable 50 cm length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to SMA male cable 50 cm length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. This BNC to SMA cable is a male to male coax assembly, PE3W03670-50CM, can also be known as a BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W03670-50CM is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03670-50CM can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male cable 50 cm length using RG188 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

1,021

PE9705

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Mini UHF Male to FME Plug Adapter. Mini UHF adapter PE9705 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our Mini UHF to FME adapter is a between series coaxial adapter design. This 50 Ohm Mini UHF adapter is precision manufactured to RF components industry specifications. Mini UHF male to FME plug adapter is one of the many RF components that ship same day as they are ordered. PE9705 male Mini UHF to plug FME adapter has a straight body. This Pasternack straight Mini UHF coax adapter is a in-line RF adapter. Our male Mini UHF to plug FME adapter PE9705 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This Mini UHF to FME radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $2.55
25 : $2.42
50 : $2.3
100 : $2.19

1,003

PE37057-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm MCX Plug to 75 Ohm BNC Female Bulkhead Cable 72 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm MCX plug to 75 Ohm BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm MCX plug to 75 Ohm BNC female bulkhead cable 72 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and BNC bulkhead cable connection on the other. Our MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE37057-72 can also be known as a MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MCX male to BNC jack cable assembly PE37057-72 is built with RG179 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to BNC cable connectors, has a 75 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE37057-72 RF cable are available on our downloadable PDF datasheet.PE37057-72 can also be used in the other direction and will be BNC female bulkhead to MCX plug cable assembly if the opposite connectivity is required. MCX male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

190

PE34705-48

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm Mini SMB Plug to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMB cable connection on one end and BNC cable connection on the other. Our mini SMB to BNC cable assemblies have a plug gender on end 1 and male on end 2. This mini SMB to BNC cable is a plug to male coax assembly, PE34705-48, can also be known as a mini SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. Mini SMB male to BNC plug cable assembly PE34705-48 is built with RG187 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency mini SMB plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34705-48 can also be used in the other direction and will be BNC male to mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to BNC cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax.

1 : $69.59
25 : $66.11
50 : $62.63
100 : $59.85

PE3C4705-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P141HF, RF Cable Type: PE-P141HF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-P141HF Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-P141HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using PE-P141HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C4705-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.82 inches, allowing for a single bend without damaging the cable. Our PE3C4705-36 RF cable has a FEP jacket of 0.163-inch diameter. The flexible RF cable has an in-series connection. SMA plug to SMA plug cable assembly PE3C4705-36 is built with PE-P141HF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $175.99
10 : $168.95
25 : $161.91
100 : $154.87

PE7056-30

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 1.5 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.15:1, Attenuation: 30 dB, Connector Series 1: TNC, Connector Gender 1: Male, Connector Series 2: TNC, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, TNC Male To TNC Female Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 1.5 GHz. PE7056-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. The Pasternack PE7056-30 30 dB attenuator is rated for up to 1.5 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7056-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $829.99
5 : $796.79
10 : $763.59

PE3705LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using 75 Ohm RG179 Coax, LF Solder., Radio frequency assembly BNC male to BNC male cable 48 inch length using 75 Ohm RG179 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 48 inch length using 75 Ohm RG179 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3705LF-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3705LF-48 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using 75 Ohm RG179 coax, LF solder.

1 : $67.49
25 : $64.12
50 : $60.74
100 : $58.04

PE3C0705

Pasternack Enterprises

PE3C7052

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm.

PE3W01705-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to BNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to BNC male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assembly has male gender on end 1 and male on end 2. PE3W01705-24 can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to BNC plug cable assembly PE3W01705-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W01705-24 RF cable are available on our downloadable PDF datasheet.PE3W01705-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $83.49
25 : $79.32
50 : $75.14
100 : $71.8

PE3W07056

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Female to Reverse Polarity SMA Male Right Angle Cable Using RG142 Coax. PE3W07056 is a SMA female to reverse polarity SMA male right angle cable using RG142 coax. This Pasternack SMA female to reverse polarity SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07056 SMA female to SMA reverse polarity male right angle cable assembly is constructed with RG142 coax.

PE3W08705/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MMCX Plug to N Female Bulkhead Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MMCX plug to N female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to N female bulkhead low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a MMCX cable connection on one end and a type N bulkhead cable connection on the other. Our low loss MMCX to type N cable assembly has a plug gender on end 1 and a female on end 2. PE3W08705/HS-100CM can also be known as a low loss MMCX male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08705/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our MMCX plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. MMCX male to type N jack cable assembly PE3W08705/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W08705/HS-100CM can also be used in the other direction and will be a type N female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to type N cable assembly for quick shipment worldwide. Variations of MMCX and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $71.69
25 : $68.11
50 : $64.52
100 : $61.65

PE3W23705

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Male to TNC Female Bulkhead Cable Using 53 Ohm RG55 Coax. PE3W23705 is a N male to TNC female bulkhead cable using RG55 coax. This Pasternack N male to TNC female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC bulkhead cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W23705 N male to TNC female bulkhead cable assembly is constructed with RG55 coax.

PE3705LF

Pasternack Enterprises

PE3C7051

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm.

Relay Specialties

5705H5

Visual Communications Company

CML

1 : $0.65
10 : $0.63
25 : $0.61
50 : $0.59
100 : $0.57

3,957

HD-817-05PH

BlockMaster Blocks

Term Blk; 5-pos; 0.325"; PCB Pin; Ni; M3; Ends; 20A; 300VAC PA66; 14.00mm Pin; 13.00 mm

1 : $3.37
10 : $3.27
25 : $3.18
50 : $3.09
100 : $3.0

507

HD-705-02PH

BlockMaster Blocks

Barrier Terminal Block; 2-pos 0.300"; Mtg Ends

1 : $1.31
10 : $1.27
25 : $1.23
50 : $1.2
100 : $1.17

225

FTB-705-03PH-C

BlockMaster Blocks

Term Blk; 3-pos; 0.300"; PCB Pin; Ni; M3; Ends; 10A; 250VAC PA66; 9.4mm Pin; Black
RoHS : Compliant

1 : $2.97
10 : $2.89
25 : $2.8
50 : $2.73
100 : $2.65

100

FTB-705-03PH-CS-M30

BlockMaster Blocks

Barrier Terminal Block; 3-pos 0.300"; PCB; M3; Mtg Ends; 10A 250VAC; PA66; Black

1 : $1.55
10 : $1.5
25 : $1.46
50 : $1.42
100 : $1.38

HD-705-06PH

BlockMaster Blocks

Barrier Terminal Block; 6-pos 0.300"; Mtg Ends

1 : $3.69
10 : $3.58
25 : $3.48
50 : $3.38
100 : $3.29

Venkel Ltd.

PCPI787050-221KU

VENKEL LTD

PC Power Inductor;787050;220uH;�10%
RoHS : Not Compliant

UPTF0805-10W-N-7050BT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;705R;�0.1%
RoHS : Compliant

Win Source Electronics

770520-1

TE Connectivity

CONN SOCKET 16-20AWG CRIMP TIN / Socket Contact Tin 16-20 AWG Crimp
RoHS : Compliant

3,600 : $0.0834
2,690 : $0.0931
2,080 : $0.0963
1,510 : $0.0995
975 : $0.1027
400 : $0.1251

100,000

NCP705MTADJTCG

onsemi

IC REG LIN POS ADJ 500MA 6WDFN / 500 mA, Ultra-Low Quiescent Current, IQ 13 A, Ultra-Low Noise, LDO Voltage Regulator
RoHS : Compliant

860 : $0.3499
645 : $0.3902
500 : $0.4037
360 : $0.4171
235 : $0.4306
100 : $0.5248

37,560

TLV70533YFPT

Texas Instruments

IC REG LINEAR 3.3V 200MA 4DSBGA
RoHS : Compliant

910 : $0.3702
730 : $0.3852
560 : $0.4003
395 : $0.4303
255 : $0.4454
120 : $0.4754

33,490

TPS3802K33DCKR SC70-5

Texas Instruments

430 : $0.7902
345 : $0.8223
265 : $0.8543
185 : $0.9186
120 : $0.9508
60 : $1.0149

26,620

BQ294705DSGR/BQ294705DSGT

Texas Instruments

305 : $0.9924
230 : $1.1069
175 : $1.1451
130 : $1.1833
85 : $1.2214
35 : $1.4886

22,380

MAX17055EWL+T

Maxim Integrated Products

Industry's Lowest IQ Fuel Gauge with ModelGauge m5 EZ Eliminates Battery Characterization
RoHS : Compliant

295 : $1.0285
220 : $1.1471
170 : $1.1867
125 : $1.2262
80 : $1.2658
35 : $1.5427

20,790

ADM705AR-REEL7

Analog Devices Inc

IC SUPERVISOR MPU 4.65V WD 8SOIC
RoHS : Not Compliant

275 : $1.243
220 : $1.2935
170 : $1.344
120 : $1.4451
75 : $1.4956
40 : $1.5967

18,590

ADS7056IRUGR

Texas Instruments

IC ADC 14BIT SAR 8X2QFN
RoHS : Compliant

34 : $8.8637
26 : $9.8864
20 : $10.2273
15 : $10.5682
10 : $10.9091
4 : $13.2955

18,517

AUR9705AGH

Diodes Incorporated

IC REG BUCK ADJ 1A SYNC TSOT25
RoHS : Compliant

1,550 : $0.2174
1,155 : $0.2425
895 : $0.2508
650 : $0.2592
420 : $0.2676
175 : $0.326

17,000

VN7050AS

STMicroelectronics

High-side driver with MultiSense analog feedback for automotive applications

355 : $0.8451
285 : $0.8794
220 : $0.9138
155 : $0.9825
100 : $1.0168
50 : $1.0855

15,094

MAX17058X+T10

Maxim Integrated Products

IC BAT FUEL GAUGE LI-ION 1C 8WLP
RoHS : Compliant

167 : $1.7998
125 : $2.0075
97 : $2.0767
70 : $2.1459
46 : $2.2151
19 : $2.6997

6,500

ADS7056IRUG

Texas Instruments

14-Bit 2.5MSPS Analog-to-Digital Converter

69 : $4.3665
52 : $4.8703
40 : $5.0382
29 : $5.2062
19 : $5.3741
8 : $6.5497

4,591

SI7055-A20-IM

Silicon Laboratories Inc

SENSOR DIGITAL -40C-125C 6DFN / Temperature Sensor Digital, Local -40°C ~ 125°C 14 b 6-DFN (3x3)
RoHS : Compliant

120 : $2.5167
90 : $2.8071
69 : $2.9039
50 : $3.0007
33 : $3.0975
14 : $3.775

3,000

BQ24705RGERG4

Texas Instruments

IC LI-ION BATT CHARGER 24-VQFN
RoHS : Compliant

455 : $0.7439
365 : $0.7741
280 : $0.8044
195 : $0.8649
130 : $0.8951
60 : $0.9555

2,460

MAX1705EEE+T

Maxim Integrated Products

IC REG BOOST ADJ 1A 16QSOP
RoHS : Compliant

31 : $9.7745
23 : $10.9023
18 : $11.2782
13 : $11.6542
9 : $12.0301
4 : $14.6617

270

Wuhan P&S

NCV8705MTADJTCG

onsemi

Adj. Output,500mA,LDO Voltage Regulator
RoHS : Compliant

1 : $1.16
100 : $0.74
500 : $0.61
1,000 : $0.56

60,000

705-2R2M-R Revenda

Ligação URL