| Os motores de busca de Datasheet de Componentes eletrônicos |
|
613-R33K Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() GLYN GmbH & Co. KG | P0840VGF1MA00-CS-26134 | Tianma Micro-electronics Co | TFT 8.40", 640x480, IPS, 900cd, RGB (TTL) | 100 | ||
![]() PUI | 12.95613 | 2,733 | ||||
| 16-1351 | 60 | |||||
| 16-1342 | 13 | |||||
| 15613 | 8 | |||||
| 16-1332 | 7 | |||||
![]() Richardson RFPD | R161341007W | Radiall | Conn Type N 0Hz to 11GHz 50Ohm ST Panel Mount RCP RoHS : Not Compliant | 0 | ||
| R417006130 | Radiall | Attenuator 3GHz RoHS : Not Compliant |
| 0 | ||
| PKM4613NHPIHSSPLA | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| ATS-61350W-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Clip Stainless Steel 1. RoHS : Compliant | 0 | |||
| ATS-61375D-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Clip Stainless Steel 2. RoHS : Compliant |
| 0 | ||
| LFPTXO061382BULK | IQD Frequency Products | Temperature Compensated Crystal Oscillator 10MHz RoHS : Compliant | 0 | |||
| R161332000W | Radiall | Conn Type N F 0Hz to 11GHz 50Ohm ST Panel Mount Go RoHS : Compliant |
| 0 | ||
| R417306130 | Radiall | Attenuator 4GHz RoHS : Not Compliant |
| 0 | ||
| ATS-61310D-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Clip Stainless Steel 2. RoHS : Compliant |
| 0 | ||
| ATS-61375W-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive Straight Clip Stainless Steel 1. RoHS : Compliant | 0 | |||
ADG613YRUZ-REEL7![]() | Analog Devices Inc | Analog Switch Quad SPST 16-Pin TSSOP T/R RoHS : Compliant |
| 0 | ||
| 534DC000613DG | Skyworks Solutions Inc | Oscillator XO 1.213GHz/ 1.29GHz/ 1.315GHz/ 1.3625G RoHS : Compliant |
| 0 | ||
| R161323000 | Radiall | Conn Type N 0Hz to 11GHz 50Ohm Clamp ST Panel Moun RoHS : Compliant |
| 0 | ||
| R161329130 | Radiall | Conn Type N 0Hz to 11GHz 50Ohm Crimp ST Panel Moun RoHS : Compliant | 0 | |||
| R161338220W | Radiall | RF COAX CABLE MT CON |
| 0 | ||
![]() Rutronik | CR16-1301-FY | ASJ Holdings Limited | RC0603 1,3K 1% 0,1W TK100 RoHS : Compliant |
| 1,060,000 | |
| CR16-1300-FY | ASJ Holdings Limited | RC0603 130R 1% 0,1W TK100 RoHS : Compliant |
| 220,000 | ||
| CR16-1302-FY | ASJ Holdings Limited | RC0603 13K 1% 0,1W TK100 RoHS : Compliant |
| 120,000 | ||
| AR16-13R0-FL | ASJ Holdings Limited | RC0603 13R 1% 0,1W TK100 AUTOMOTIVE RoHS : Compliant |
| 95,000 | ||
| 430450613 | Molex | 06P Micro-Fit Header 2 ROW RoHS : Compliant |
| 50,112 | ||
| 0034.6613 | Schurter Electronic Components | MST250 0.63A 250V SUBM SLOW RoHS : Compliant |
| 23,800 | ||
| Q65111A6136 | ams OSRAM Group | IR-EMITTER 3MM 850NM 90mW/sr RoHS : Compliant |
| 20,000 | ||
| SIM2070-6-1-30-00-A | Global Connector Technology | 06P mini_SIM_Card Holder w/SWITCH RoHS : Compliant |
| 13,300 | ||
| 1613 30 VP3 | Lumberg Connect GmbH | 02P DC Power Supp. PCB Jack 90° RoHS : Compliant |
| 4,000 | ||
| 0031.1613 | Schurter Electronic Components | FEC Cap IP40 Holder 6,3x32 slot RoHS : Compliant |
| 2,800 | ||
| 1613 32 | Lumberg Connect GmbH | 02P DC Power Supp. PCB Jack 90° RoHS : Compliant |
| 2,000 | ||
| TLE49613LHALA1 | Infineon Technologies AG | HallSwitch Latch TO92 RoHS : Compliant |
| 2,000 | ||
| SFH6136-X001 | Vishay Intertechnologies | HIGHSPEED COUPLER 1MBD, VDE,THT RoHS : Compliant |
| 20 | ||
| CY96F613RBPMC-GS-UJE2 | Infineon Technologies AG | F²MC-16FX 96.5K LQFP-48 125°C RoHS : Compliant |
| 4 | ||
![]() Chip 1 Exchange | BCX55-16,135![]() | Nexperia | INSTOCK RoHS : Compliant | 8,000 | ||
| ISL6613ACRZ-T | Intersil Corporation | INSTOCK RoHS : Compliant | 5,430 | |||
| CRCW12061300FT | INSTOCK | 4,990 | ||||
| CR16-1302-F# | ASJ Holdings Limited | INSTOCK | 3,080 | |||
| 26133019- | Richco | INSTOCK | 2,790 | |||
| BSP613P H6327 | Infineon Technologies AG | INSTOCK | 1,999 | |||
| CRCW1206130K1%RT1 | INSTOCK | 1,513 | ||||
| 861304020243450000- | INSTOCK | 468 | ||||
| 61-3589 | INSTOCK | 350 | ||||
| M83421/06-1303M | INSTOCK | 328 | ||||
| 101613 A1F 21.06.2010 | HARTING Technology Group | INSTOCK | 65 | |||
| 61302021121 | Wurth Elektronik | INSTOCK RoHS : Compliant | 32 | |||
| PL5.0-16-130B | Tamura Corporation of America | INSTOCK RoHS : Compliant | 30 | |||
| 13216E6138-2 | INSTOCK | 12 | ||||
| MS-7613 | Hewlett Packard Co | INSTOCK | 10 | |||
![]() Braemac Americas-Symmetry | EVALAG6130 | Silver Telecom Ltd | Eval Board for Ag6130 Single Channel PSE Module |
| 1 | |
| GW16130 | Gateworks Corporation | Iridium Satellite Modem |
| 1 | ||
| TMC6130-EVAL | Analog Devices Inc | TMC6130 Eval Board |
| 1 | ||
| GW16132 | Gateworks Corporation | u-blox CAT M1 Cellular & BLE Radio Card |
| 1 | ||
ATCA-06-132M-V![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| LMO6138-WB-D10M195-SM | embedded antenna design (ead) | LMO6138 antenna With Brackets 2 x 10M BWL195s and SMA-Male |
| 0 | ||
| LMO6138-WB-D5M195-SM | embedded antenna design (ead) | LMO6138 antenna With Brackets 2 x 5M BWL195s and SMA-Male |
| 0 | ||
| 3990252613 | Telit | LE910Q1-SF w/o GNSS INTERFACE TLB |
| 0 | ||
| AG6130 | Silver Telecom Ltd | Single port IEEE 802.3af, 802.3at & 802.3bt PSE Module |
| 0 | ||
| LMO6138-NB-SMSM | embedded antenna design (ead) | LMO6138 antenna no bracket with 2 x 15cm RG316 SMA-Male |
| 0 | ||
| LMO6138-WB-SMSM | embedded antenna design (ead) | LMO6138 antenna w.bracket and 2 x 15cm RG316 SMA-Male |
| 0 | ||
ATCA-06-131M-H![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| LMO6138-WB-10M240-SM | embedded antenna design (ead) | 5G/4G/LTE Multiband MIMO Outdoor Omni antenna using 240 cable |
| 0 | ||
| C8051T613-GMR | Silicon Laboratories Inc |
| 0 | |||
| C8051T613-GMR | Silicon Laboratories Inc |
| 0 | |||
![]() Chip-Germany GmbH | BS0613SPVGXUMA1 | 7,448 | ||||
| TPS613785QWRTERQ1 | Texas Instruments | RoHS : Compliant | 3,000 | |||
![]() DB Roberts | M2161-3005-AL | RAF Electronic Hardware |
| 36 | ||
| MS51861-34C | Military Specifications |
| 10 | |||
| A5-61-360-10 | Southco | 0 | ||||
| 47-61-354-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 3BT-P8613-00 | Acumnet / Camcar | DELTA-PT 12-0.51 X 5 TXP | 0 | |||
| AC-30-361-31-KD10 | Southco | AC-30-361-31-KD10 | 0 | |||
| AC-CAD0-6-1370-046 | Southco | 0 | ||||
| D3-316-132-190 | Southco | 0 | ||||
| E3-126-131 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E5-6-1324-UU1 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| MP-06-130-60 | Southco | The sleek and stylish MP Pulls feature a flush-mount design with flange shape flexibility and polished knobs. Easily installed the pulls are fully surface mounted to accommodate multiple panel thicknesses. | 0 | |||
| R4-0-61352 | Southco | WIRE KEEPER | 0 | |||
| 47-61-394-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| D8-316-133-190 | Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | 0 | |||
| FAE-Z56133 | Avdel | O-RING OR11X3NI70 | 0 | |||
![]() Maritex | RCA0613RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA0613RFLF; HKR |
| 120,000 | |
| RCA06130RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06130RFLF; HKR |
| 30,000 | ||
TMP6131DECR![]() | Texas Instruments | Temperature Sensors; TMP6131DECR; TEXAS INSTRUMENTS; 2; 500 �m; 1 mm RoHS : Compliant |
| 9,074 | ||
TPS76133DBVR![]() | Texas Instruments | LDO Regulators; TPS76133DBVR; TEXAS INSTRUMENTS; 5; 1; 100 mA; 3.3 V RoHS : Compliant |
| 8,499 | ||
TMP6131QDECRQ1![]() | Texas Instruments | PTC Thermistors; TMP6131QDECRQ1; TEXAS INSTRUMENTS; 0402; 2 RoHS : Compliant |
| 3,965 | ||
| ULN2003AS16-13 | Diodes Incorporated | Specialty Drivers; ULN2003AS16-13; DIODES; 16; 13 V; 7 RoHS : Compliant |
| 3,833 | ||
TPA6138A2PWR![]() | Texas Instruments | Multimedia Amplifiers; TPA6138A2PWR; TEXAS INSTRUMENTS; 14; 0 m; 2; 4.4 mm RoHS : Compliant |
| 3,425 | ||
AD8613AUJZ-REEL7![]() | Analog Devices Inc | Instrumentation Amplifiers; AD8613AUJZ-REEL7; ANALOG DEVICES; 2.2 mV; 95 dB; 2.5 V; 38 �A RoHS : Compliant |
| 3,338 | ||
ADP1613ARMZ-R7![]() | Analog Devices Inc | DC DC Converters; ADP1613ARMZ-R7; ANALOG DEVICES; 8; Boost, SEPIC; 1; 3.2 mm RoHS : Compliant |
| 1,330 | ||
| RC1608F2613CS | Samsung Electro-Mechanics | Chip Resistor; SMD; 0603; 261K; 1%; 1/10W RoHS : Compliant |
| 860 | ||
| 936613-1 | TE Connectivity | Rectangular Connector Contacts; 936613-1; TE CONNECTIVITY; Tin; Crimp; Cable RoHS : Compliant |
| 801 | ||
TPA6130A2RTJR![]() | Texas Instruments | Multimedia Amplifiers; TPA6130A2RTJR; TEXAS INSTRUMENTS; 20; 0 m; 2; 4 mm RoHS : Compliant |
| 555 | ||
| P1613-GR-LN-CT | CONNTHERM | Cabel gland P16; nylon; PG16 10-13mm; grey; with lock nut |
| 55 | ||
| FDMC86139P | onsemi | MOSFETs; FDMC86139P; ON SEMICONDUCTOR; 4.4 A; 67 m?; -100 V; 25 V RoHS : Compliant |
| 5 | ||
TPS613221ADBVR![]() | Texas Instruments | DC DC Converters; TPS613221ADBVR; TEXAS INSTRUMENTS; 5; Boost; 1; 1.6 mm RoHS : Compliant |
| 1 | ||
![]() Pasternack Enterprises US | PE36137LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm F Male to 75 Ohm F Male Cable 60 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our type F to F type cable assemblies have a male gender on end 1 and male on end 2. This F type to type F cable is a male to male coax assembly, PE36137LF-60, can also be known as a type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE36137LF-60 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG179 coax, RoHS. |
| 2 | |
| PE36137-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm F Male to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our F type to type F cable assemblies have a male gender on end 1 and male on end 2. This F type to type F cable is a male to male coax assembly, PE36137-12, can also be known as a type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE36137-12 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG179 coax. |
| 2 | ||
| PE36137LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm F Male to 75 Ohm F Male Cable 72 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 72 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 72 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our type F to F type cable assemblies have a male gender on end 1 and male on end 2. This F type to type F cable is a male to male coax assembly, PE36137LF-72, can also be known as a type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. F type plug to type F plug cable assembly PE36137LF-72 is built with RG179 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency F type male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 72 inch length using 75 Ohm RG179 coax, RoHS. |
| 2 | ||
| PE3W07613 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to MMCX Plug Cable Using LMR-100 Coax. PE3W07613 is a MCX jack to MMCX plug cable using LMR-100A coax. This Pasternack MCX jack to MMCX plug cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MMCX for connector 2. Our jack MCX to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07613 MCX jack to MMCX plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C10361-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated 7/16 DIN Male to N Male Low PIM Cable 36 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to N male low PIM cable 36 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to N male low PIM cable 36 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10361-36 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10361-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10361-36 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10361-36 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE36613/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to TNC Female Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to TNC female cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC female cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assembly has male gender on end 1 and female on end 2. PE36613/HS-48 can also be known as a SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to TNC jack cable assembly PE36613/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE36613/HS-48 RF cable are available on our downloadable PDF datasheet.PE36613/HS-48 can also be used in the other direction and will be TNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01661-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low Loss Cable 36 Inch Length Using LMR-200 Coax., Radio frequency assembly SMA male to N male low loss cable 36 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 36 inch length using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W01661-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W01661-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01661-36 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 36 inch length using LMR-200 coax. |
| 0 | ||
| PE3W06130/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SSMC Plug to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SSMC plug to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMC plug to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMC cable connection on one end and SMA cable connection on the other. Our low loss SSMC to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3W06130/HS-100CM can also be known as a low loss SSMC male to SMA plug cable assembly and will be shipped same-day as it is purchased. SSMC male to SMA plug cable assembly PE3W06130/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SSMC plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06130/HS-100CM can also be used in the other direction and will be SMA male to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMA cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W15613LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm. SSMA Female to SSMA Female Cable Using PE-034SR Coax, LF Solder. PE3W15613LF is a SSMA female to SSMA female cable using PE-034SR coax. This Pasternack SSMA female to SSMA female cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our female SSMA to female SSMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15613LF SSMA female to SSMA female cable assembly is constructed with PE-034SR coax. | 0 | |||
| PE3W16135LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-400 Coax, LF Solder. PE3W16135LF is a N male to TNC male cable using LMR-400 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16135LF N male to TNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W19613 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SSMA Female Bulkhead Cable Using RG178 Coax. PE3W19613 is a MMCX plug right angle to SSMA female bulkhead cable using RG178 coax. This Pasternack MMCX plug right angle to SSMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SSMA for connector 2. MMCX right angle to SSMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SSMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19613 MMCX plug right angle to SSMA female bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE36134-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 60 inches. 7/16 DIN Male to 7/16 DIN Male Cable 60 Inch Length Using RG217 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG217 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36134-60, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36134-60 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 60 inch length using RG217 coax. |
| 0 | ||
| PE3FCA761-3M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Connector 1 Series: MPO (w/o pins), Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 3 mm, Max Crush Resistance, Short Term (N/100mm): 500, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Type B MPO Female (w/o pins) to LC/UPC Clipped fan-out, 2.0mm Diameter, 16 Fiber, Multimode OM4 40/100G, 50/125, LSZH Jacket-3M. Pasternack’s PE3FCA761-3M fiber optic fan-out cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long fan-out cable assembly is equipped with MPO (w/o pins)/UPC to LC/UPC duplex clip connectors. Our fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. The fiber optic jumper from Pasternack is suitable for applications such as 100G/400G parallel optics network applications, high-density fiber breakout connectivity, spine-leaf data center architectures, MPO backbone to LC duplex distribution and aggregation switch and transceiver connectivity. This fan-out cable has a multimode OM4 fiber and comes with a breakout diameter of 2 mm. With the flexibility of custom lengths, the PE3FCA761-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this 16-strand fiber optic fan-out cord can be found on its downloadable PDF datasheet. This PE3FCA761-3M fiber optic cable with a 3 mm cable diameter and 23 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of MPO (w/o pins)/UPC to LC/UPC fiber optic fan-out cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W13613/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female Bulkhead to Reverse Thread SMA Female Bulkhead Cable Using RG178 Coax with HeatShrink. PE3W13613/HS is a reverse polarity SMA female bulkhead to reverse thread SMA female bulkhead cable using RG178 coax. This Pasternack reverse polarity SMA female bulkhead to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA bulkhead to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13613/HS SMA reverse polarity female bulkhead to SMA reverse thread female bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W16131/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-LLPX Coax with HeatShrink. PE3W16131/HS is a N male to N male cable using LMR-400-LLPX coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16131/HS N male to N male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Relay Specialties | 16-1325 | Schneider Electric Relays | MAGNECRAFT METAL CLIP FOR 788 |
| 865 | |
| 16-1342 | Schneider Electric Relays | MAGNECRAFT METAL CLIP FOR 782 |
| 295 | ||
| 16-1332 | Schneider Electric Relays | Relay Accessory Metal Spring Clip |
| 283 | ||
| 461322 | Johnson Electric Group | T-H BLUE LENS (TH31-904B) (TH4 |
| 200 | ||
| HD-613-03PHG | BlockMaster Blocks | Barrier Terminal Block; 3-pos 0.248"; Tri Wall |
| 64 | ||
| HD-613-05PH | BlockMaster Blocks | Term Blk; 5-pos; 0.250"; Lug Ni; M3; Ends; 13A; 250VAC PA66; 12.8 mm; Black; Closed RoHS : Compliant |
| 50 | ||
| 6S6/130V | Visual Communications Company | CML S-6 LAMP, 130 VOLT, 6 WATT |
| 47 | ||
| 6131 | Crydom Inc | Buffered I/O Module |
| 12 | ||
| 179613.01 | ABB Low Voltage Products and Systems | ABB/ENTRELEC |
| 10 | ||
![]() Teledyne HiRel | 5962-8761301CA | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | ||
| 5962-87613012A | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761301DA | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | PWCR0805-RK-2613DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;261K;�0.5% RoHS : Compliant | 0 | ||
| AGCR0805-RK-2613FT | VENKEL LTD | Auto Grade Resistor;0805;1/8W;�100PPM;261K;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QN-2613BT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;261K ;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-UC-2613FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;261K;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RN-2613BT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;261K ;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-TC-2613CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;261K ;�0.25% RoHS : Compliant | 0 | |||
| PWCR0603-UK-2613FT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�100PPM;261K;�1% RoHS : Compliant | 0 | |||
| PWCR1210-XK-2613DT | VENKEL LTD | Pulse Withstanding CR;1210;1W;�100PPM;261K;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-2613DT | VENKEL LTD | Chip Resistor;0805;1/10W;261K ;�0.5% RoHS : Compliant | 0 | |||
| CRS0201-20W-2613FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;261K ;�1% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-2613CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;261K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VC-2613CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;261K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-3613CT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;361K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-3613FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;361K ;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2613FT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;261K ;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | DCX55-16-13 | Diodes Incorporated | Small Signal Bipolar Transistor, 0.001A I(C), 60V V(BR)CEO, 1-Element, NPN, Silicon | 13,775 | ||
| ADC1613D105HN/C1,5 | NXP Semiconductors | A/D Converter, 16-Bit, 2 Func, 1 Channel, PQCC56 RoHS : Compliant | 12,364 | |||
ADG1613BCPZ-REEL7![]() | Analog Devices Inc | SPST, 4 Func, CMOS RoHS : Compliant | 11,994 | |||
| MAX6133A30+ | Analog Devices Inc | Three Terminal Voltage Reference, 1 Output, 3V, BICMOS, PDSO8 RoHS : Compliant | 9,756 | |||
| MAX25613ATP-VY | Analog Devices (Maxim Integrated) | 9,650 | ||||
| 81036132X | Texas Instruments | OT PLD, 40ns, TTL, CQCC20 | 8,728 | |||
| MFS2613AMDA2AD | NXP Semiconductors | RoHS : Compliant | 8,596 | |||
| BZV55-C56,135 | Nexperia | Zener Diode, 56V V(Z), 5%, 0.4W, Silicon, Unidirectional RoHS : Compliant | 8,328 | |||
| MAX6138CEXR30+ | Analog Devices Inc | Two Terminal Voltage Reference RoHS : Compliant | 8,318 | |||
| PTMP6131DYAT | Texas Instruments | Analog Circuit, 1 Func, PDSO2 | 7,777 | |||
| MAXQ613J-2562+T | Analog Devices Inc | RISC Microcontroller, 16-Bit, 12MHz, CMOS RoHS : Compliant | 7,081 | |||
| 8103613SA | Texas Instruments | OT PLD, 40ns, PAL-Type, TTL, CDFP20 RoHS : Not Compliant | 6,715 | |||
| MAX4613ESE+ | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 6,045 | |||
| 787613-1 | TE Connectivity | Board Connector, 5 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Receptacle RoHS : Compliant | 5,994 | |||
LM6134AIMX![]() | Texas Instruments | Operational Amplifier, 4 Func, 4000uV Offset-Max, BIPolar, PDSO14 RoHS : Not Compliant | 4,183 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |