 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
5414-R2 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
 Ameya Holding Limited | TAS5414CTPHDRQ1 | Texas Instruments | IC AMP AUDIO DGTL 4CH 64HTQFP RoHS : Compliant | 123,638 | ||
TPS54140ADGQR | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant | 2,500 | |||
 ComSIT USA | 835414A | MERITAC PLASTIC TOOLING | AVAILABLE EU | 746 | ||
ComSIT USA | TAS5414CTPHDRQ1 | Texas Instruments | Audio Amplifier, 25W, 4 Channel(s), 1 Func, PQFP64 RoHS : Compliant | 2,000 | ||
| 5414J | Texas Instruments | HEX 1-INPUT INVERT GATE Inverter, TTL/H/L Series, 6-Func, 1-Input, TTL, CDIP14 RoHS : Not Compliant | 30 | |||
 NexGen Digital | 284541-4 | TE Connectivity | RoHS : Compliant | 14,930 | ||
TPS54140DGQR | Texas Instruments | RoHS : Compliant | 9 | |||
| TPS54140DGQ | Texas Instruments | RoHS : Compliant | 8 | |||
 Braemac Americas-Symmetry | FXUB06.54.145AQ.EN9.C0.IT | Taoglas Antenna Solutions | Wideband Cellular 90x15mm Flexible PCB Antenna (617-8000MHz) with end feed, IPEX MHF4L 145mm 1.37 Micro Coax with custom heatshrink White, connector facing up , special tolerance |
| 0 | |
| FXUB06.54.145AQ.EN5 | Taoglas Antenna Solutions | Wideband Cellular 90x15mm Flexible PCB Antenna (617-8000MHz) with end feed, IPEX MHF4L 145mm 1.37 Micro Coax with custom heatshrink Blue |
| 0 | ||
| FXUB06.54.145AQ.EN9 | Taoglas Antenna Solutions | Wideband Cellular 90x15mm Flexible PCB Antenna (617-8000MHz) with end feed, IPEX MHF4L 145mm 1.37 Micro Coax with custom heatshrink White |
| 0 | ||
 Chip-Germany GmbH | 74454147 | Wurth Elektronik | RoHS : Compliant | 15 | ||
| 354142 | ERNI | RoHS : Compliant | 7 | |||
| 354148 | ERNI | RoHS : Compliant | 5 | |||
 EBV Elektronik | BCM54140B0KFBG | Broadcom Limited | QuadPort Gigabit Ethernet Transceiver 256 Pins FBGA (Alt: BCM54140B0KFBG) RoHS : Compliant | 0 | ||
| BCM54140B0IFBG | Broadcom Limited | (Alt: BCM54140B0IFBG) RoHS : Compliant | 0 | |||
| BCM65414B1IFSBG | Broadcom Limited | BCM65414B1IFSBG (Alt: BCM65414B1IFSBG) RoHS : Compliant | 0 | |||
 Flip Electronics | 954141CFLFT | Integrated Device Technology Inc | Stock RoHS : Compliant | 37,698 | ||
| ICS954141CFLF | Integrated Device Technology Inc | Stock | 37,698 | |||
| 954141CFLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant | 37,698 | |||
| IDT954141CFLF | Integrated Device Technology Inc | Stock | 37,698 | |||
| NVD5414NT4G | onsemi | Stock RoHS : Compliant | 10,000 | |||
| NVD5414NT4G-VF01 | onsemi | Stock, Ship Today RoHS : Compliant | 10,000 | |||
 Maritex | TPS54140DGQR | Texas Instruments | DC DC Converters; TPS54140DGQR; TEXAS INSTRUMENTS; 10; Buck; 1; 3 mm RoHS : Compliant |
| 2,850 | |
| 354146 | TE Connectivity | Hard Metric Backplane Connectors; 354146; TE CONNECTIVITY |
| 68 | ||
 Pasternack Enterprises US | PE45414 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: 2.4mm, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Interface Type 1: PE-SR405AL, Interface Type 2: RG405, Interface Type 3: PE-SR405FLJ. 2.4mm Male Connector Solder Attachment for PE-SR405AL, RG405, PE-SR405FLJ. PE45414 2.4mm male coaxial connector has an interface type of PE-SR405AL, RG405, PE-SR405FLJ and a 50 Ohm impedance. Pasternack 2.4mm male connector uses shield/contact solder as an attachment method. Our male 2.4mm coaxial connector provides a minimum frequency of DC and a maximum frequency of 50 GHz. The Pasternack 2.4mm male coaxial connector has a PEI dielectric type and a VSWR of 1.16. The Pasternack 2.4mm coaxial connector has a beryllium copper body with gold over nickel plating. Our PE45414 2.4mm connector uses beryllium copper contact. This 2.4mm male coaxial RF connector is RoHS and REACH compliant. This Pasternack male 2.4mm connector will ship the same day as purchased. Our 2.4mm male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom 2.4mm connector cable assemblies that will ship the same day as well. |
| 70 | |
| PE3MSA00541-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 78 Ohm 3-Slot TRB Solder/Clamp Plug with Blunt Cut for PE-30-02001 Twinax (.242 O.D.) 48" Cable., Radio frequency assembly lead free 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02001 twinax (.242 O.D.) 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02001 twinax (.242 O.D.) 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a plug gender on end 1 and sexless on end 2. PE3MSA00541-48 can also be known as a 1553 TRB male to blunt cut sexless cable assembly and will be shipped same-day as it is purchased. TRB male to blunt cut sexless cable assembly PE3MSA00541-48 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to blunt cut sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00541-48 can also be used in the other direction and will be blunt cut sexless to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to blunt cut sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm 3-Slot TRB solder/clamp plug with blunt cut for PE-30-02001 twinax (.242 O.D.) 48" cable. |
| 10 | ||
| PE3W25414/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Thread SMA Male Cable Using RG178 Coax with HeatShrink. PE3W25414/HS is a SMA male right angle to reverse thread SMA male cable using RG178 coax. This Pasternack SMA male right angle to reverse thread SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse thread male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25414/HS SMA male right angle to SMA reverse thread male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W05414/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Right Angle Cable Using RG316-DS Coax with HeatShrink. PE3W05414/HS is a N female bulkhead to SMA male right angle cable using RG316-DS coax. This Pasternack N female bulkhead to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05414/HS N female bulkhead to SMA male right angle cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W15414 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Female to Reverse Polarity Push-On MCX Plug Right Angle Cable Using LMR-100 Coax. PE3W15414 is a BNC female to reverse polarity MCX plug right angle cable using LMR-100A coax. This Pasternack BNC female to reverse polarity MCX plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MCX for connector 2. BNC to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC to reverse polarity plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15414 BNC female to MCX reverse polarity plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36541-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to 1.85mm Male Cable 48 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to 1.85mm male cable 48 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to 1.85mm male cable 48 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 1.85mm cable connection on the other. Our SMA to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This SMA to 1.85mm cable is a male to male coax assembly, PE36541-48, can also be known as a SMA plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 1.85mm plug cable assembly PE36541-48 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36541-48 can also be used in the other direction and will be 1.85mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 1.85mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 1.85mm male cable 48 inch length using PE-SR405FL coax. |
| 0 | ||
| PE3W10541-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to TNC Male Cable Using RG316 Coax In 48 Inch Length., Radio frequency assembly TNC male right angle to TNC male cable using RG316 coax in 48 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to TNC male cable using RG316 coax in 48 inch length, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and TNC cable connection on the other. Our right angle TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W10541-48, can also be known as a right angle TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W10541-48 is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10541-48 can also be used in the other direction and will be TNC male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male cable using RG316 coax in 48 inch length. |
| 0 | ||
| PE3W05541-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Female Bulkhead to SMP Female Right Angle Cable 48 Inch Length Using PE-SR405FL Coax., Radio frequency assembly TNC female bulkhead to SMP female right angle cable 48 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to SMP female right angle cable 48 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle SMP cable connection on the other. Our TNC to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This TNC to SMP cable is a female to female coax assembly, PE3W05541-48, can also be known as a TNC jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. TNC jack to SMP jack cable assembly PE3W05541-48 is built with PE-SR405FL which is a formable coax type. The Pasternack formable TNC cable assembly is manufactured with TNC to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency TNC female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05541-48 can also be used in the other direction and will be right angle SMP female to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMP cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to SMP female right angle cable 48 inch length using PE-SR405FL coax. |
| 0 | ||
 Teledyne HiRel | DM5414J/883 | Teledyne HiRel | HEX INVERTER WITH SCHMITT TRIGGER INPUTS | 0 | ||
 Win Source Electronics | TPS54140ADRCT | Texas Instruments | IC REG BUCK ADJ 1.5A 10SON RoHS : Compliant |
| 60,000 | |
| TPS54140ADRCR | Texas Instruments | IC REG BUCK ADJ 1.5A 10VSON RoHS : Compliant |
| 54,510 | ||
| TPS54140DGQ | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant |
| 50,000 | ||
| TPS54140DGQRG4 | Texas Instruments | Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 1.5A 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad RoHS : Compliant |
| 46,130 | ||
| ATF-54143-TR2G | Broadcom Limited | RF MOSFET PHEMT FET 3V SOT343 RoHS : Compliant |
| 30,710 | ||
| ATF-54143-TR1G | Broadcom Limited | FET RF 5V 2GHZ SOT-343 RoHS : Compliant |
| 30,660 | ||
| TPS54140DGQR | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant |
| 30,000 | ||
| ATF-54143-BLKG | Broadcom Limited | FET RF 5V 2GHZ SOT-343 RoHS : Compliant |
| 25,160 | ||
| ATF-54143-TR1 | Broadcom Limited | FET RF 5V 2GHZ SOT-343 / RF Mosfet 3 V 60 mA 2GHz 16.6dB 20.4dBm SOT-343 RoHS : Not Compliant |
| 25,040 | ||
ATF-54143-BLK | Agilent Technologies Inc | Low Noise Enhancement Mode Pseudomorphic HEMT in a Surface Mount Plastic Package RoHS : Not Compliant |
| 24,950 | ||
| TPS54140ADGQ | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant |
| 14,832 | ||
| TPS54140ADGQR | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant |
| 14,040 | ||
| 354142 | TE Connectivity | 2MM HM A 110POS F SHLD / 110 Position Receptacle, Female Sockets Connector 0.079" (2.00mm) Through Hole, Right Angle |
| 8,120 | ||
TPS54140QDGQRQ1 | Texas Instruments | IC REG BUCK ADJ 1.5A 10MSOP RoHS : Compliant |
| 4,370 | ||
| 354148 | TE Connectivity | 2MM HM B22 110POS F 3MM SHLD / 110 Position Receptacle, Female Sockets Connector 0.079" (2.00mm) Through Hole, Right Angle |
| 1,200 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand