533G-AF5-R Price, Revenda, Stock

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. UHF Male to UHF Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly UHF male to UHF male cable 36 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to UHF male cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and UHF cable connection on the other. Our UHF to UHF cable assemblies have a male gender on end 1 and male on end 2. This UHF to UHF cable is a male to male coax assembly, PE33053-36, can also be known as a UHF plug to UHF plug cable assembly and will be shipped same-day as it is purchased. UHF plug to UHF plug cable assembly PE33053-36 is built with RG142 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this UHF male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. UHF plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to UHF male cable 36 inch length using RG142 coax.

1 : $93.09
25 : $88.44
50 : $83.78
100 : $80.06

244

PE3C10353-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to N Male Low PIM Cable 36 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 36 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 36 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10353-36 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10353-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10353-36 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10353-36 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $192.99
25 : $185.27
50 : $179.48
100 : $175.62

PE35334LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Male Cable Using RG316 Coax with HeatShrink, LF Solder, RoHS. PE35334LF/HS is a reverse polarity SMA female to reverse polarity SMA male cable using RG316 coax. This Pasternack reverse polarity SMA female to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35334LF/HS SMA reverse polarity female to SMA reverse polarity male cable assembly is constructed with RG316 coax.

PE36533-18

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 18 inches. 2.92mm Male to 1.85mm Male Cable 18 Inch Length Using PE-SR405FL Coax., Radio frequency assembly 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 1.85mm cable connection on the other. Our 2.92mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 1.85mm cable is a male to male coax assembly, PE36533-18, can also be known as a 2.92mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 1.85mm plug cable assembly PE36533-18 is built with PE-SR405FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.92mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36533-18 can also be used in the other direction and will be 1.85mm male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 1.85mm male cable 18 inch length using PE-SR405FL coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE38533

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm MCX Plug to 75 Ohm BNC Male Cable Using 75 Ohm RG179 Coax. PE38533 is a MCX plug to BNC male cable using RG179 coax. This Pasternack MCX plug to BNC male cable assembly uses a 75 Ohm MCX for connector 1 and a 75 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE38533 MCX plug to BNC male cable assembly is constructed with RG179 coax.

PE3C3533/HS

Pasternack Enterprises

PE3C5331

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMA Female to Straight Cut Lead Cable Using PE-P086 Coax., Radio frequency assembly SMA female to straight cut lead cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to straight cut lead cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C5331, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C5331 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5331 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to straight cut lead cable using PE-P086 coax.

PE3W03533LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SSMA Female Bulkhead Cable Using PE-SR047FL Coax with HeatShrink, LF Solder, RoHS. PE3W03533LF/HS is a Mini SMP female right angle to SSMA female bulkhead cable using PE-SR047FL coax. This Pasternack Mini SMP female right angle to SSMA female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SSMA for connector 2. Mini SMP right angle to SSMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female SSMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03533LF/HS Mini SMP female right angle to SSMA female bulkhead cable assembly is constructed with PE-SR047FL coax.

PE3W05333/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to QMA Male Right Angle Cable Using LMR-240-DB Coax with HeatShrink. PE3W05333/HS is a QMA male right angle to QMA male right angle cable using LMR-240-DB coax. This Pasternack QMA male right angle to QMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. QMA right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05333/HS QMA male right angle to QMA male right angle cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W05335

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Cable Using PE-SR402AL Coax. PE3W05335 is a TNC male right angle to TNC male cable using PE-SR402AL coax. This Pasternack TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05335 TNC male right angle to TNC male cable assembly is constructed with PE-SR402AL coax.

PE3W14533

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Male Cable Using LMR-100A-UF Coax. PE3W14533 is a BNC male right angle to SMA male cable using LMR-100A-UF coax. This Pasternack BNC male right angle to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14533 BNC male right angle to SMA male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25533

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. MCX Plug to TNC Male Cable Using LMR-195-FR Coax. PE3W25533 is a MCX plug to TNC male cable using LMR-195-FR coax. This Pasternack MCX plug to TNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm TNC for connector 2. Our plug MCX to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25533 MCX plug to TNC male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE33953-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Jack to BNC Female Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMB jack to BNC female cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC female cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and female on end 2. PE33953-36 can also be known as a SMB female to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB female to BNC jack cable assembly PE33953-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33953-36 RF cable are available on our downloadable PDF datasheet.PE33953-36 can also be used in the other direction and will be BNC female to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements.

1 : $90.99
25 : $86.44
50 : $81.89
100 : $78.25

PE3535-33

Pasternack Enterprises

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

PE3C2953-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male Right Angle to N Female Bulkhead Low Loss Test Cable 36 Inch Length Using PE-P300LL Coax., Radio frequency assembly N male right angle to N female bulkhead low loss test cable 36 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low loss test cable 36 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and N type bulkhead cable connection on the other. Our low loss test right angle type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C2953-36, can also be known as a low loss test right angle type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C2953-36 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2953-36 can also be used in the other direction and will be type N female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss test cable 36 inch length using PE-P300LL coax.

1 : $679.99
25 : $645.99
50 : $611.99

Relay Specialties

5331H7

Visual Communications Company

LED YELLOW T1-3/4 0.72" VERTICAL
RoHS : Compliant

1 : $1.73
10 : $1.67
25 : $1.61
50 : $1.56
100 : $1.51

2,463

353300

OptiFuse

Automotive Circuit Breaker 300 A; 42 VDC / 48 VDC Type III - Manual Reset

1 : $132.61
10 : $117.88
25 : $106.09
50 : $96.45
100 : $92.25

1,710

R1812-075-33-R

OptiFuse

PTC Fuse; 0.75 A; 33 VDC; 1812 SMD; Castellated

1 : $0.26
10 : $0.24
25 : $0.22
50 : $0.21
100 : $0.19

1,500

5330H7

Visual Communications Company

CML CIRCUIT BOARD INDICATORS -
RoHS : Compliant

1 : $1.82
10 : $1.76
25 : $1.7
50 : $1.64
100 : $1.59

1,025

5338H7

Visual Communications Company

CML CIRCUIT BOARD INDICATORS -
RoHS : Compliant

1 : $1.55
10 : $1.49
25 : $1.44
50 : $1.39
100 : $1.35

100

HP-ATA-115-3-3P-CL1

BlockMaster Blocks

Power Distribution Block; 115A 600V; Panel; 3-Pole Stud to stud; 1 Out; Cover

1 : $24.35
10 : $24.03
25 : $23.72
50 : $23.42
100 : $23.12

5684F3;5;3;3

Visual Communications Company

CML LED

1 : $7.55
10 : $7.28
25 : $7.03
50 : $6.8

9853-3231

Kanson Electronics Inc

Inductive proximity sensor

1 : $178.29

9853-3031

Kanson Electronics Inc

Inductive proximity sensor

1 : $159.43

TE Connectivity

160533-1

TE Connectivity

110 FASTON,REC.,20-17 AWG,BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 17 AWG Wire Size: .5 – 1 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 20 – 17 AWG .5 – 1 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

1,000 : $0.17
100 : $0.22
25 : $0.33
10 : $0.37
1 : $0.41

24,089

1-84533-6

TE Connectivity

1.25MM FFC POST PLATED H 16P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity
RoHS : Compliant

1,000 : $0.52
500 : $0.55
250 : $0.58
50 : $0.65
25 : $0.68
10 : $0.73
1 : $0.86

17,120

1-5331677-8

TE Connectivity

SOCKET,MIN-SPR SN-AU SER-3 Socket Length: 3.51 mm Socket Length: .138 in PCB Hole Diameter: .062 in PCB Hole Diameter: 1.57 mm Socket Sleeve Style: Closed Bottom 3.51 mm .138" .062" 1.57 mm | TE Connectivity
RoHS : Compliant

1,000 : $0.91
500 : $0.94
250 : $0.97
100 : $1.0
50 : $1.03
1 : $1.13

16,508

2-1445053-3

TE Connectivity

MICRO MNL HDR ASSY S/ROW LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $1.13
100 : $1.51
10 : $1.86
1 : $2.36

11,644

1-5332095-9

TE Connectivity

SOCKET,MIN-SPR W/KO SN-AU S-1 TE Connectivity
RoHS : Compliant

1,000 : $0.56
500 : $0.57
250 : $0.59
100 : $0.61
50 : $0.63
1 : $0.69

7,550

1445336-2

TE Connectivity

LOOSE PC CONTACT 15 AU PLATED Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Flash Wire Size: 26 – 22 AWG Operating Voltage: 250 VAC Gold (Au) Socket Gold Flash 26 – 22 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.29
100 : $0.39
10 : $0.49
1 : $0.61

6,885

1-84533-0

TE Connectivity

1.25MM FFC POST PLATED H 10P Centerline (Pitch): .049 in Centerline (Pitch): 1.25 mm Insertion Force Type: Non ZIF PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.049" 1.25 mm Non ZIF Right Angle | .049" | TE Connectivity
RoHS : Compliant

1,000 : $0.44
500 : $0.45
250 : $0.47
100 : $0.48
50 : $0.5
1 : $0.55

3,971

1053354-1

TE Connectivity

2062 0000 00,SMA PCB VERT JACK RF Interface: SMA RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .25 in RF Connector Mated Outer Diameter (Approximate): 6.35 mm Impedance: 50 Ω SMA Jack .25" 6.35 mm | TE Connectivity
RoHS : Compliant

1,000 : $12.7
50 : $12.89
25 : $13.54
10 : $14.45
1 : $17.0

1,982

164533-4

TE Connectivity

25P.HDP20 REC.ASSY. Number of Positions: 25 Connector & Housing Type: Receptacle Connector System: Cable-to-Panel Connector Mounting Type: Panel Mount Connector Shell Size: 3 Ampseal Header | 25 Receptacle Cable-to-Panel Panel Mount | TE Connectivity
RoHS : Compliant

1,000 : $1.98
50 : $2.24
10 : $2.48
1 : $2.9

839

1-5102153-3

TE Connectivity

A/L UNIV HDR 44P VERT Connector System: Wire-to-Board Number of Positions: 44 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 44 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $4.57
500 : $4.7
250 : $4.84
100 : $5.0
50 : $5.15
1 : $5.65

495

102153-3

TE Connectivity

016 UNIV HDR SP 4S 15DP STD TE Connectivity
RoHS : Compliant

1,000 : $1.94
500 : $1.99
250 : $2.05
100 : $2.12
50 : $2.19
1 : $2.4

413

120953-3

TE Connectivity

UPM EXPANDED RCPT ASSEMBLY PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Mezzanine (Stacking) Number of Positions: 6 PCB Mount Receptacle Vertical Board-to-Board Perpendicular | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $7.01
500 : $7.21
250 : $7.43
100 : $7.68
50 : $7.9
1 : $8.67

330

5332225-5

TE Connectivity

PLUG, TWIN BNC, RF Interface: Twin BNC RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .572 in RF Connector Mated Outer Diameter (Approximate): 14.52 mm Compatible With RF Cable Type: RG 108A RG 108 Twin BNC Plug .572" 14.52 mm | TE Connectivity
RoHS : Compliant

250 : $30.56
50 : $35.0
25 : $35.95
10 : $38.62
1 : $45.44

185

1055331-1

TE Connectivity

2098 3251 94 RF Contact Style: Coax Contact Type: Pin Number of Positions: 1 Contact Orientation: Straight Contact Mating Area Plating Material: Gold (Au) Coax Pin 1 Straight | Gold (Au) | TE Connectivity
RoHS : Compliant

1,000 : $16.87
500 : $17.35
250 : $17.89
100 : $18.49
50 : $19.03
1 : $20.88

164

1-292253-3

TE Connectivity

CT CONN MT HDR ASSY H 13P NAT PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 13 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 13 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $1.09
500 : $1.15
10 : $1.52
1 : $1.78

Teledyne HiRel

54F533DMQB

Teledyne HiRel

OCTAL TRANSPARENT LATCH WITH TRI-STATE OUTPUTS

54ACTQ533DMQB

Teledyne HiRel

LATCH, 8-BIT, TRANSPARENT, WITH INVERTING 3-STATE OUTPUTS

54ACTQ533LMQB

Teledyne HiRel

LATCH, 8-BIT, TRANSPARENT, WITH INVERTING 3-STATE OUTPUTS

54ACTQ533FMQB

Teledyne HiRel

LATCH, 8-BIT, TRANSPARENT, WITH INVERTING 3-STATE OUTPUTS

54F533LMQB

Teledyne HiRel

OCTAL TRANSPARENT LATCH WITH TRI-STATE OUTPUTS

54F533FMQB

Teledyne HiRel

OCTAL TRANSPARENT LATCH WITH TRI-STATE OUTPUTS

Waytek, Inc.

53-3318-S

Eaton Electronics

Eaton Bussmann Series 53-3318 Euro SR panel plug is a black panel-mount filler for 8006 and 8007 Euro SR rocker switch openings. It fits the standard 37 mm x 21 mm opening and is RoHS compliant for clean switch-panel layouts.

4 : $1.8768
50 : $1.8105
100 : $1.7442
200 : $1.6559
500 : $1.6008

1,134

533-P0-070-22

Battery Disconnect w/Circuit Breaker, 70A, 32VDC

1 : $54.73
5 : $48.93
10 : $45.71
20 : $44.43
50 : $43.14
100 : $41.0

177

53253-3

Grote Industries Inc

Amber Stop-Tail-Turn LED Light 4" Round 10 LED 12V US 40 GROTE .15A

1 : $29.9
5 : $28.0
10 : $26.26
50 : $24.2
100 : $23.1
200 : $22.31

533-P0-060-22

Battery Disconnect w/ Circuit Breaker, 60A, 32VDC