| Os motores de busca de Datasheet de Componentes eletrônicos |
|
50250P-C2-R0 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Coilcraft Direct | MLC1550-252MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 540 | |
![]() NexGen Digital | 502598-2593 | Molex | RoHS : Compliant | 83,783 | ||
| 85502-5005 | Molex | RoHS : Compliant | 1,431 | |||
| MIC39150-2.5WU TR | Micrel Inc | 554 | ||||
DSC1001DL5-025.0000T![]() | Microchip Technology Inc | RoHS : Compliant | 78 | |||
| KC80526GY850256SL547 | Intel Corporation | RoHS : Not Compliant | 8 | |||
![]() PUI | 12.95025 | 2,080 | ||||
![]() Rutronik | 5025790000 | Molex | MALE CRIMP CLIKMATE AWG 24-28 REEL RoHS : Compliant |
| 120,000 | |
| 5025700893 | Molex | 08P micro_SD-Card Holder Push-Push RoHS : Compliant |
| 61,100 | ||
| 5025780400 | Molex | 04P CLIK-MATE Housing SR POS LOCK RoHS : Compliant |
| 32,000 | ||
| 5025790100 | Molex | CLIK-Mate Crimp AWG 24-28 TIN RoHS : Compliant |
| 14,870 | ||
| 021502.5MXP | Littelfuse Inc | 2.5A 250V slow 5x20 ceramic RoHS : Compliant |
| 12,000 | ||
| P/N5025 | Keystone Electronics Corp | THM TEST POINT JUMPER RoHS : Compliant |
| 2,100 | ||
![]() Braemac Americas-Symmetry | IP502512-1 | DB Unlimited | Piezo Indicator |
| 1 | |
| ACMP-5025-101-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACMP-5025-501-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| BS25A-H350/2.5L | Nipron Co |
| 0 | |||
| ACMP-5025-251-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACMP-5025-142-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
WLP.2450.25.4.A.02![]() | Taoglas Antenna Solutions | WLP.25 2.4GHz 25*25*4.5mm Ceramic Patch Antenna RoHS : Compliant |
| 0 | ||
| ACMP-5025-102-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | VN5025AJ-E 36V 40A | STMicroelectronics | 1,872 | |||
VN5025AJ-E![]() | STMicroelectronics | RoHS : Compliant | 1,872 | |||
| 85502-5008 | Molex | RoHS : Compliant | 8 | |||
![]() DB Roberts | E3-150-25 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic |
| 91 | |
| RS-5025-0250 | Heyco | RS 0500 OD X250 ID X250 LG NAT | 0 | |||
| 97-50-250-25 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. | 0 | |||
| 23CDC05025 | Essentra Components | 0 | ||||
| 17W05025 | Essentra Components | 0 | ||||
| 1250-25-B | RAF Electronic Hardware | 0 | ||||
| 055025500003 | Essentra Components | 0 | ||||
| RS-5025-0593 | Heyco | RS 0500 OD X250 ID X593 LG NAT | 0 | |||
| R4-0-50253-2 | Southco | 0 | ||||
| 78201-050254 | Avdel | BOWL MOUNTING ASSY. S.ZT. BEFE | 0 | |||
| A1-11-502-50 | Southco | 0 | ||||
| 5859-N-375-250-250 | RAF Electronic Hardware | 0 | ||||
| AES50-250CSI | PennEngineering (PEM) | 0 | ||||
| 17W05025B | Essentra Components | FLAT WASHER, .140 ID, .500 OD, | 0 | |||
| 47-83-502-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | HCNW4502-500E | Broadcom Limited | Optocoupler DCIN 1CH Transistor With Base DCOUT 8Pin CDIP W SMD TR (Alt: HCNW4502-500E) RoHS : Compliant | 73,500 | ||
| AFBR-395025RZ | Broadcom Limited | (Alt: AFBR-395025RZ) RoHS : Compliant | 59,400 | |||
| UJ3N065025K3S | onsemi | Silicon Carbide SiC JFET EliteSiC 25 mohm 650V TO2473L (Alt: UJ3N065025K3S) RoHS : Compliant | 600 | |||
DSC1001CI5-025.0000![]() | Microchip Technology Inc | MEMS Oscillator 25 MHz SMD 32mm x 25mm 10 ppm 33 V DSC1001 (Alt: DSC1001CI5-025.0000) RoHS : Compliant | 110 | |||
MJ15025G![]() | onsemi | Bipolar Transistor PNP 250 V 16 A ONSSPCTRNSTLT1T0R (Alt: MJ15025G) RoHS : Compliant | 100 | |||
NSI45025AT1G![]() | onsemi | LED Driver Constant Current Regulator 25 mA 45 V ONSSPCPRTCNZZ1J5W (Alt: NSI45025AT1G) RoHS : Compliant | 0 | |||
| IRSM505-025DA | Infineon Technologies AG | MicroIntegrated Power Module IGBTBased 500V 4Ohm 23Pin DIP Tube (Alt: SP001547112) RoHS : Compliant | 0 | |||
VND5025BKTR-E![]() | STMicroelectronics | MOSFET DRVR 2OUT Hi Side NonInv 24Pin PowerSSO TR (Alt: VND5025BKTR-E) RoHS : Compliant | 0 | |||
| HCPL-4502-500E | Broadcom Limited | Optocoupler DCIN 1CH Transistor With Base DCOUT 8Pin PDIP SMD TR (Alt: HCPL-4502-500E) RoHS : Compliant | 0 | |||
| MIC39150-2.5WU | Microchip Technology Inc | LDO Regulator Pos 25V 15A 3Pin TO263 Tube (Alt: MIC39150-2.5WU) RoHS : Compliant | 0 | |||
| MP-5050-250R-40-80 | Luminus Devices | (Alt: MP-5050-250R-40-80) RoHS : Compliant | 0 | |||
| MP-5050-250R-30-80 | Luminus Devices | (Alt: MP-5050-250R-30-80) RoHS : Compliant | 0 | |||
| DSC1123CL5-025.0000 | Microchip Technology Inc | (Alt: DSC1123CL5-025.0000) RoHS : Compliant | 0 | |||
| DSC1001CE5-025.0000T | Microchip Technology Inc | MEMS Oscillator 25 MHz SMD 32mm x 25mm 10 ppm 33 V DSC1001 (Alt: DSC1001CE5-025.0000T) RoHS : Compliant | 0 | |||
DSC1001CL5-025.0000T![]() | Microchip Technology Inc | MEMS Oscillator 25 MHz SMD 32mm x 25mm 10 ppm 33 V DSC1001 (Alt: DSC1001CL5-025.0000T) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 95150250 | Atkins & Pearce Inc | Wire Placehldr | 1,000 | ||
| J599EMC5025A11 | SOURIAU-SUNBANK | Circular Conn |
| 192 | ||
| 030-1995-025 | ITT Interconnect Solutions | Connector Acc | 79 | |||
| J599EMD5025A11 | SOURIAU-SUNBANK | Circular Conn |
| 53 | ||
| J599EMC5025A13 | SOURIAU-SUNBANK | Circular Conn |
| 50 | ||
| T5935-0251-002 | SOURIAU-SUNBANK | Backshells & Ac |
| 50 | ||
| 10-538750-25H | Amphenol Aerospace | Connector Acc |
| 20 | ||
| J1950-25-34N2 | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| 667-262-M-F1502-5 | Glenair Inc | Connector Acc RoHS : Compliant |
| 2 | ||
| 10-786350-258 | Amphenol Aerospace | Connector 38999 | 0 | |||
| S1422-16N-1.50-25 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| TDH-6050-2500 | Leach International Corporation | Relays | 0 | |||
| 10-538750-259 | Amphenol Aerospace | Connector Acc |
| 0 | ||
| M10-538675-025 | Amphenol Aerospace | Circular Conn | 0 | |||
| 5M2525-025 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
![]() Flip Electronics | NSV45025AT1G | onsemi | Stock, Ship Today RoHS : Compliant | 50,600 | ||
NSI45025T1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 30,000 | |||
| NSV45025T1G | onsemi | Stock, Ship Today RoHS : Compliant | 2,995 | |||
MJ15025G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,700 | ||
| FSB50250BS | onsemi | Stock RoHS : Compliant | 450 | |||
| FSB50250AS | onsemi | Stock, Ship Today RoHS : Compliant | 404 | |||
| FSB50250B | onsemi | Stock, Ship Today RoHS : Compliant |
| 270 | ||
| FSB50250A | onsemi | Stock, Ship Today RoHS : Compliant |
| 270 | ||
| FSB50250AT | onsemi | Stock, Ship Today RoHS : Compliant | 170 | |||
![]() Maritex | 5025780400 | Molex | Rectangular Connector Housings; 5025780400; MOLEX; 1; 4; Beige; Straight RoHS : Compliant |
| 22,657 | |
| 5025780800 | Molex | Rectangular Connector Housings; 5025780800; MOLEX; 1; 8; Beige; Straight RoHS : Compliant |
| 19,494 | ||
5025780300![]() | Molex | Rectangular Connector Housings; 5025780300; MOLEX; 1; 3; Beige; Straight RoHS : Compliant |
| 13,346 | ||
| MBI5025GP | Macroblock Inc | Integrated system, driver LED; housing: SSOP24L-150-0.64; number of channels: 16; output current: 1-45mA; supply voltage: 3.3-5V |
| 6,000 | ||
LM5025AMTCX/NOPB![]() | Texas Instruments | DC DC Converters; LM5025AMTCX/NOPB; TEXAS INSTRUMENTS; 16; 2; 4.4 mm RoHS : Compliant |
| 4,814 | ||
NSI45025AT1G![]() | onsemi | Power Management ICs (PMICs); NSI45025AT1G; ON SEMICONDUCTOR; 2; Surface Mount; 45 V RoHS : Compliant |
| 2,395 | ||
| 5025781000 | Molex | Rectangular Connector Housings; 5025781000; MOLEX; 1; 10; 10; Beige |
| 2,316 | ||
| DG250-2.5-03P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 2.5mm; 3-ways; oblique entry; range wire 0.5mm2 (AWG 24-20); spring-loaded; grey; UL 300V/2A TUV 250V/6A |
| 1,988 | ||
| WH06-1C 502 - 5K | Allconnect | Semi-fix SMD potentiometer; PRM6H502; 5k; 5x2.5mm |
| 1,208 | ||
MJ15025G![]() | onsemi | Bipolar Transistors (BJT); MJ15025G; ON SEMICONDUCTOR; PNP; 2; 250 V; 16 A RoHS : Compliant |
| 474 | ||
| 5025780600 | Molex | Rectangular Connector Housings; 5025780600; MOLEX; 1; 6; Beige; Straight RoHS : Compliant |
| 313 | ||
| DG250-2.5-04P-11-00A(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 2.5mm; 4-ways; oblique entry; range wire 0.5mm2 (AWG 24-20); spring-loaded; grey; UL 300V/2A TUV 250V/6A RoHS : Compliant |
| 180 | ||
| WH06-2C 502 - 5K | Allconnect | Semi-fix SMD potentiometer; PRM6V502; 5k; 5x5mm |
| 145 | ||
| WIBC1804(3314)G 502 - 5K ROHS | Allconnect | Semi-fix SMD potentiometer; SMD; 1804G501; 5k; 4.5x4.5mm |
| 119 | ||
| 5025780200 | Molex | Rectangular Connector Housings; 5025780200; MOLEX; 1; 2; Beige; Straight RoHS : Compliant |
| 1 | ||
![]() Neutron USA | 0505025.MXEP | Littelfuse Inc | Cartridge Fuses 500V 25A 3AB PT PB-FREE RoHS : Compliant |
| 50 | |
| 51-235.025D2 | EAO AG | Switch, Key Lock, Round Actuator, 2 Position, 1 NC/1 NO, 250V, 5A, 51 Series RoHS : Compliant |
| 50 | ||
| ATS-FPX025025025-76-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 25mm L, 25mm W, 25mm H, 11.57C/W at 100LFM RoHS : Compliant |
| 41 | ||
| 51-495.025D | EAO AG | Keylock Switches KYLK SQ MNT 2POS |
| 25 | ||
| ATS-CPX025025025-168-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Right-Tab, 25x25x25mm, 6.94C/W RoHS : Compliant |
| 19 | ||
| 15025PA-24K-AA-00 | NMB Technologies Corporation | DC Fans DC Tubeaxial Fan, 150x172x25mm, 24VDC, 183.5CFM, Rib Mount, Lead Wires RoHS : Compliant |
| 14 | ||
| 09457005025 | HARTING Technology Group | Ethernet Cables / Networking Cables RJI CAB 4XAWG 22/7 TRAIL 3.0M RoHS : Compliant |
| 10 | ||
| ATS-CPX025025025-140-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Left-Tab, 25x25x25mm, 7.21C/W RoHS : Compliant |
| 4 | ||
| UGB-18GM50-255-2E3 | PEPPERL + FUCHS AUTOMATION | Sensor, Ultrasonic, 193008 |
| 1 | ||
| DP3050-256 | SOCKET | DPC FOR POCKET PC- SPRINT TOUCHPOINT 2100 2200 HANDSETS |
| 1 | ||
| 51-195.025D | EAO AG | Keylock Switches KEYLOCK 2POS 1PST DB |
| 0 | ||
| HS250 250R F | Ohmite Mfg Co | Wirewound Resistors - Chassis Mount 250W 250 OHM1% |
| 0 | ||
| 51-255.025D | EAO AG | Keylock Switch,2Pos.,18x18mm,1NC+1NO,Rest/MAINT,Key Remove A,5A,250VAC,Solder |
| 0 | ||
| S450251 | Seiko Epson Corporation | DS TRANSFER PRODUCTION (63) 44X 650 |
| 0 | ||
| 055025 | NMB Technologies Corporation | Fan Accessories |
| 0 | ||
![]() Pasternack Enterprises US | PE3FCA550-25M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA550-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with SC/APC to SC/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA550-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 103 | |
| PE3C6502-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 50 cm Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716M-LP 7/16 DIN cable connection on one end and TC-SPP375-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6502-50CM, can also be known as a low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly PE3C6502-50CM is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716M-LP 7/16 DIN male to TC-SPP375-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 50 cm length using SPO-375 coax using Times Microwave parts. |
| 60 | ||
| PE3FCA250-25M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC APC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA250-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA250-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 51 | ||
| PE3FCA450-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber SC UPC to SC UPC, OM5 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Lime Green-25M. Pasternack’s PE3FCA450-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 12-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our lime green fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA450-25M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 46 | ||
| PE3FCA502-5M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-5M. Pasternack’s PE3FCA502-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA502-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA502-5M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 43 | ||
| PE3C8502-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. Outdoor Rated 7/16 DIN Male to N Female Low PIM Cable 50 CM Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to N female low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to N female low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low PIM 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a male to female coax assembly, PE3C8502-50CM, can also be known as a low PIM 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8502-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8502-50CM can also be used in the other direction and will be type N female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to N female low PIM cable 50 cm length using SPO-250 coax using Times Microwave parts. |
| 42 | ||
| PE3FCA350-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to ST UPC, OM4 Multimode Distribution Cable, 5.6mm Riser, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA350-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 8-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA350-25M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 35 | ||
| PE5025 | Pasternack Enterprises | Key Specifications. Design Crimper Connector Series D-Sub. D-Sub Contact Crimp Tool., Pasternack’s PE5025 is a professional-grade D-sub contact crimp tool that is used to crimp commercial D-subminiature pins and sockets for 20-30 AWG wires. The spring-loaded holding mechanism of this tool keeps contact in place until the crimp cycle is complete. This crimp tool has a durable construction that ensures years of use. The ratchet mechanism of this contact crimp tool provides consistent, quality crimps. This PE5025 crimp tool from Pasternack is suitable for cable assemblies, cable repair, and D-sub cable termination applications. Additional specifications for this D-sub contact crimp tool are in our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of crimp tools for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal D-sub contact crimp tool for your requirements. |
| 10 | ||
| PE71S5025 | Pasternack Enterprises | Key Specifications.. USB Ethernet Controlled High Isolation SPDT Absoptive Switch 100 MHz to 50 GHz, 2.4mm. The Pasternack’s PE71S5025 is a high isolation USB Controlled SPDT Switch. Our SPDT USB switch uses 2.4mm to 2.4mm connectors at 50 Ohm impedance. This 2.4mm high isolation USB SPDT switch has a minimum frequency of 100 MHz and a maximum frequency of 50 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This SPDT USB switch has a female to female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5025 high isolation USB switch has a nickel-plated female body. Our SPDT USB switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm USB Controlled switch has a 3:1 maximum VSWR (Voltage Standing Wave Ratio). Our PE71S5025 SPDT USB Controlled switch is a great option for test & measurement, 5G communication, military electronic systems, wireless infrastructure, fiber optics and research & development applications. Additional specifications for this high isolation SPDT switch can be found on its PDF specification datasheet and CAD drawings. The SPDT USB switch PE71S5025 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT 2.4mm high isolation USB switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect high isolation USB Controlled switch for your requirement. |
| 1 | ||
| PE3W05025 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to SMB Jack Cable Using PE-C100-LSZH Coax. PE3W05025 is a reverse polarity SMA male to SMB jack cable using PE-C100-LSZH coax. This Pasternack reverse polarity SMA male to SMB jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our reverse polarity male SMA to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05025 SMA reverse polarity male to SMB jack cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W25025 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Female Bulkhead Cable Using PE-C400 Coax. PE3W25025 is a reverse polarity SMA female to N female bulkhead cable using PE-C400 coax. This Pasternack reverse polarity SMA female to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25025 SMA reverse polarity female to N female bulkhead cable assembly is constructed with PE-C400 coax. | 0 | |||
| PE3W05025LF/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174NM, RF Cable Type: RG174NM, RF Cable Impedance: 50 Ohm. FME Plug to Bordeaux FAKRA Jack Right Angle Cable Using RG174 Non-Magnetic Coax with HeatShrink., Pasternack’s PE3W05025LF/BK/HS FME plug to right angle FAKRA jack RF cable assembly using RG174NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The FME plug to FAKRA jack cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a FME cable connection on one end and a right angle FAKRA cable connection on the other. Our FME to FAKRA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W05025LF/BK/HS can also be known as a FME male to right angle FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05025LF/BK/HS RF cable has a pvc jacket. The flexible RF cable has a between series connection. This PE3W05025LF/BK/HS FME male to FAKRA female cable assembly is built with RG174NM, which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle FAKRA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05025LF/BK/HS can also be used in the other direction and will be a right angle FAKRA jack to FME plug cable assembly if the opposite connectivity is required. This FME male to FAKRA right angle female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to FAKRA cable assembly for quick shipment worldwide. Variations of FME and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to FAKRA RF cable assembly as per your requirements. | 0 | |||
| PE3C5025 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. FME Plug to N Female Cable Using LMR-195 Coax., Radio frequency assembly FME plug to N female cable using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to N female cable using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and type N cable connection on the other. Our FME to N type cable assemblies have a plug gender on end 1 and female on end 2. This FME to type N cable is a plug to female coax assembly, PE3C5025, can also be known as a FME male to N type jack cable assembly and will be shipped same-day as it is purchased. FME male to type N jack cable assembly PE3C5025 is built with LMR-195 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this FME plug to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5025 can also be used in the other direction and will be type N female to FME plug cable assembly if the opposite connectivity is required. FME male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to type N cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to N female cable using LMR-195 coax. | 0 | |||
| PE3W15025 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Cable Using LMR-100-FR Coax. PE3W15025 is a SMA male to SMB jack cable using LMR-100A-FR coax. This Pasternack SMA male to SMB jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15025 SMA male to SMB jack cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 350256RJT | TE Connectivity | 3502 56R 5% Resistance Value: 56 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 56 Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 5,796 | |
| 3502560RJT | TE Connectivity | 3502 560R 5% Resistance Value: 560 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 560 Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 4,736 | ||
| 350256RFT | TE Connectivity | 3502 56R 1% Resistance Value: 56 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 56 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,836 | ||
| 35025M1FT | TE Connectivity | 3502 5M1 1% Resistance Value: 5.1M Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 5.1M Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,757 | ||
| 3502560RFT | TE Connectivity | 3502 560R 1% Resistance Value: 560 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 560 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,545 | ||
| 350251KFT | TE Connectivity | 3502 51K 1% Resistance Value: 51K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 51K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,377 | ||
| 350251RFT | TE Connectivity | 3502 51R 1% Resistance Value: 51 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 51 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 3,365 | ||
| 35025K6JT | TE Connectivity | 3502 5K6 5% Resistance Value: 5.6K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Through-Hole Resistor | 5.6K Ω Thick Metal Film Power Resistor 5 % | TE Connectivity RoHS : Compliant |
| 3,295 | ||
| 35025K1FT | TE Connectivity | 3502 5K1 1% Resistance Value: 5.1K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 5.1K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 2,895 | ||
| 350256KFT | TE Connectivity | 3502 56K 1% Resistance Value: 56K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 56K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 2,785 | ||
| 3502510KFT | TE Connectivity | 3502 510K 1% Resistance Value: 510K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 510K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 2,260 | ||
| 3502510RFT | TE Connectivity | 3502 510R 1% Resistance Value: 510 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 510 Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 1,028 | ||
| 3-647502-5 | TE Connectivity | 05P MTA100 HDR ASSY,SM,SN, LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 943 | ||
| 35025K6FT | TE Connectivity | 3502 5K6 1% Resistance Value: 5.6K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Through-Hole Resistor | 5.6K Ω Thick Metal Film Power Resistor 1 % | TE Connectivity RoHS : Compliant |
| 497 | ||
| 1SNK805025R0000 | TE Connectivity | ZDK2.5-11-BL Modular Terminal Block Product Type: Screw Clamp Terminal Block Block Function: Feed-Through Primary Product Color: Blue Product Spacing: .204 in Product Spacing: 5.2 mm Screw Clamp Terminal Block Feed-Through Blue .204" | TE Connectivity RoHS : Compliant |
| 35 | ||
![]() Vyrian | REF5025ADGK![]() | Texas Instruments | Three Terminal Voltage Reference, 1 Output, 2.5V, Trim/Adjustable, PDSO8 | 9,807 | ||
| PD85025STR-E | STMicroelectronics | RF Power Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 9,754 | |||
| MAX15025FATB-T | Analog Devices (Maxim Integrated) | 9,413 | ||||
| AD55/025Z-0 | Analog Devices Inc | 8,652 | ||||
| PT5025C | Texas Instruments | Switching Regulator, Voltage-mode, 0.3A, 800kHz Switching Freq-Max, Hybrid RoHS : Compliant | 8,444 | |||
| MAX15025CATB+T | Analog Devices Inc | Half Bridge Based MOSFET Driver, 4A, BICMOS RoHS : Compliant | 8,385 | |||
REF5025IDG4![]() | Texas Instruments | Three Terminal Voltage Reference, 1 Output, 2.5V, Trim/Adjustable, PDSO8 RoHS : Compliant | 8,032 | |||
| ADRF5025BCCZN-R7 | Analog Devices Inc | Diversity Switch, 0.009MHz Min, 44000MHz Max RoHS : Compliant | 6,852 | |||
| CTIH50/256 | Micron Technology, Inc | 6,804 | ||||
| TLC5502-5DW | Texas Instruments | ADC, Flash Method, 8-Bit, 1 Func, 1 Channel, Parallel, 8 Bits Access, CMOS, PDSO24 | 6,781 | |||
| FSB50250UTD | onsemi | AC Motor Controller, 2.8A RoHS : Compliant | 5,333 | |||
| KSY-F250/256 | Kingston Technology Company | 4,862 | ||||
REF5025SHKJ![]() | Texas Instruments | Three Terminal Voltage Reference, 1 Output, 2.5V, Trim/Adjustable, CDFP8 RoHS : Compliant | 3,025 | |||
| KTD-INSP5150/256 | Kingston Technology Company | 2,659 | ||||
| FH52E-50(25)SA-1SH(99) | Hirose Electric | FFC/FPC Connector | 288 | |||
![]() Waytek, Inc. | 0695025.PXPS | Littelfuse Inc | MCase+ 32VDC Slotted 25A RoHS : Compliant |
| 5,820 | |
| 50250 | Hillsdale Terminal & Tool Inc | Vinyl Ring Terminal 12-10 Gauge, 5/16" Stud |
| 3,140 | ||
| 0495025.ZXA | Littelfuse Inc | 25A Cartridge Style Fuse White JCase FMX 32V RoHS : Compliant |
| 2,841 | ||
| 50250N | Hillsdale Terminal & Tool Inc | Nylon Ring Terminal 12-10 Gauge 5/16" Stud |
| 1,730 | ||
| 0895025.Z | Littelfuse Inc | 25 Amp Low Profile JCase Fuse Cartridge Style Fuse 58V RoHS : Compliant |
| 1,321 | ||
| 0695025 | Littelfuse Inc | 25A MCase White Fuse 32V LIKE BUSSMANN FMM |
| 1,242 | ||
| 5550250RD00R4 | ShawCor Ltd | DSG-Canusa 5550250RD00R4 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .250" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 1,000 | ||
| 5550250BK00R3 | ShawCor Ltd | DSG-Canusa 5550250BK00R3 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .250" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 400 | ||
| 5025 | Blue Sea Systems | ST Blade Fuse Block ATO ATC 6 Circuits with Ground & Cover 100A PER BLOCK 30A PER CIRCUIT |
| 130 | ||
| 55025 | Cole Hersee | Cole Hersee 55025 sealed waterproof toggle switch is an SPST On-Off switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It is sealed to IP68 with O-ring and epoxy sealing, and includes wire leads for protected vehicle mounting. |
| 126 | ||
| 185025F-01-1 | Eaton Electronics | 25A Manual Reset Hi Amp Surface Mount Circuit Breaker Like CB185-25 |
| 71 | ||
![]() Win Source Electronics | NSI45025AT1G![]() | onsemi | LED DRVR 2-Pin SOD-123 T/R / IC LED DRIVER LINEAR SOD-123 RoHS : Compliant |
| 329,000 | |
REF5025AID![]() | Texas Instruments | IC VREF SERIES 0.1% 8SOIC / Series Voltage Reference IC Fixed 2.5V V ±0.1% 10 mA 8-SOIC RoHS : Compliant |
| 73,912 | ||
REF5025IDRG4![]() | Texas Instruments | IC VREF SERIES 2.5V 8SOIC RoHS : Compliant |
| 27,560 | ||
REF5025IDGKT![]() | Texas Instruments | IC VREF SERIES 2.5V 8VSSOP RoHS : Compliant |
| 19,840 | ||
REF5025IDGKR![]() | Texas Instruments | IC VREF SERIES 2.5V 8MSOP RoHS : Compliant |
| 19,440 | ||
| 502598-2593 | Molex | 502598-2593 Molex FFC & FPC Connectors 0.3 FPC Bck Flip Hsg Assy25CktEmbsTpPkg datasheet, inventory, & pricing. RoHS : Compliant |
| 19,000 | ||
| MBI5025GP | Macroblock Inc |
| 16,740 | |||
REF5025IDGK![]() | Texas Instruments | Voltage Reference 2.5V 0.2% 8ppm/C VSSOP-8 |
| 15,766 | ||
| REF5025AIDGK | Texas Instruments | Voltage Reference 2.5V 0.1% 8ppm/C VSSOP-8 |
| 12,627 | ||
TPS650250RHB![]() | Texas Instruments | Power Management IC 2.5V to 6V 32-VQFN |
| 10,000 | ||
TPS650250RHBR![]() | Texas Instruments | IC PWR MGMT LI-ION SYSTEMS 32QFN RoHS : Compliant |
| 9,400 | ||
| MAX5025EUT | Maxim Integrated Products |
| 8,700 | |||
LM5025SD/NOPB![]() | Texas Instruments | Active Clamp Voltage Mode PWM Controller RoHS : Compliant |
| 6,700 | ||
REF5025AQDRQ1![]() | Texas Instruments | IC VREF SERIES 2.5V 8SOIC RoHS : Compliant |
| 5,000 | ||
MJ15025G![]() | onsemi | TRANS PNP 250V 16A TO3 RoHS : Compliant |
| 2,000 | ||
![]() Wuhan P&S | MJ15025G![]() | onsemi | Silicon Power Transistors RoHS : Compliant |
| 6,400 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |