| Os motores de busca de Datasheet de Componentes eletrônicos |
|
4894G-SM2-R Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() TME | 34894-8003 | Molex | Connector: automotive; plug; female; Automotive; straight; crimped |
| 1,200 | |
| 6-1614894-3 | TE Connectivity | Resistor: thin film; 845kΩ; SMD; 0805; 100mW; 2x1.25x0.55mm RoHS : Compliant |
| 1,000 | ||
| 34894-8001 | Molex | Connector: automotive; female; Automotive; Mini50; 4A; PIN: 16 |
| 801 | ||
| 1-104894-0 | TE Connectivity | Pin header; male; PIN: 100; AMPMODU; angled,right; Inom: 500mA; SMT RoHS : Not Compliant |
| 728 | ||
| 1394894 | Bossard Group | Screw; for metal; with flange; 6.3x22; Head: hexagonal; 10mm; zinc |
| 100 | ||
| 4894 | Keystone Electronics Corp | Screwed spacer sleeve; 9.52mm; Int.thread: UNC6-32; cylindrical |
| 0 | ||
7-1614894-4![]() | TE Connectivity | Resistor: thin film; 1.5MΩ; SMD; 0805; 100mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 0 | ||
| 8000114894 | Weidmüller Interface GmbH & Co. KG | Mounting plate; stainless steel; straight RoHS : Compliant |
| 0 | ||
| 1489453 | Bossard Group | Screw; M4; M4x16; 0.7; Head: cheese head; hex key; HEX 2.5mm |
| 0 | ||
| 1804894 | Phoenix Contact | Connector: pluggable terminal block; power supply; COMBICON L RoHS : Compliant |
| 0 | ||
| TAH489-4500 | Bahco | Hammer; fitter type; for working at height,with protection |
| 0 | ||
| 1148940000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 19A RoHS : Compliant |
| 0 | ||
| 6-1614894-1 | TE Connectivity | Resistor: thin film; 806kΩ; SMD; 0805; 100mW; ±0.1%; -55÷155°C RoHS : Compliant |
| 0 | ||
| 2764894 | Phoenix Contact | Enclosure base; green; UL94HB; EG 67,5; for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 929001489480 | Philips Semiconductors | LED tape; 8mm; 8.6W/m; CRImin: 90; 24VDC; 116lm/W |
| 0 | ||
![]() Avnet Americas | 2316489-4 | TE Connectivity | Conn Shrouded Header 4 POS 2mm Solder Right Angle Surface Mount - Tape and Reel (Alt: 2316489-4) RoHS : Compliant |
| 63,700 | |
| CY8C24894-24LTXI | Infineon Technologies AG | MCU 8-Bit PSoC M8C CISC 16KB Flash 3.3V/5V 56-Pin QFN Tray - Trays (Alt: CY8C24894-24LTXI) RoHS : Compliant |
| 9,641 | ||
| 794894-1 | TE Connectivity | - Bag (Alt: 794894-1) RoHS : Compliant |
| 2,540 | ||
| 5-104894-1 | TE Connectivity | - Rail/Tube (Alt: 5-104894-1) RoHS : Compliant |
| 2,148 | ||
| 104894-5 | TE Connectivity | - Rail/Tube (Alt: 104894-5) RoHS : Not Compliant | 731 | |||
| 3-644894-3 | TE Connectivity | - Bulk (Alt: 3-644894-3) RoHS : Compliant |
| 697 | ||
| 3-644894-3 | TE Connectivity | - Bulk (Alt: 55AC5440) RoHS : Compliant |
| 0 | ||
| RAA489400ARGNP#MA0 | Renesas Electronics Corporation | TYPE-C PORT CONTROLLER, 3X5 FCQFN, T&R - Tape and Reel (Alt: RAA489400ARGNP#MA0) RoHS : Compliant | 0 | |||
| CY8C24894-24LTXIT | Infineon Technologies AG | - Tape and Reel (Alt: CY8C24894-24LTXIT) RoHS : Compliant |
| 0 | ||
| 3-644894-4 | TE Connectivity | - Bulk (Alt: 3-644894-4) RoHS : Compliant |
| 0 | ||
| 8448940000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 8448940000) RoHS : Compliant |
| 0 | ||
HEF4894BTT,118![]() | Nexperia | Shift Register, HEF4894B, Serial to Parallel, Serial to Serial, 1 Element, 12 -Bit, 20 Pins, TSSOP - Tape and Reel (Alt: HEF4894BTT,118) RoHS : Compliant |
| 0 | ||
| 1-2106489-4 | TE Connectivity | - Bag (Alt: 1-2106489-4) RoHS : Compliant |
| 0 | ||
| MP24894GJ-P | Monolithic Power Systems | - Tape and Reel (Alt: MP24894GJ-P) RoHS : Not Compliant |
| 0 | ||
| 34894-4009 | Molex | Connector Housing, Receptacle, 8 Contacts, 2 Rows, 1.8 mm, 34894 Series, Nylon, SPS, Mini50, Black - Bulk (Alt: 0348944009) RoHS : Compliant |
| 0 | ||
![]() Newark | 794894-1 | TE Connectivity | Housing, Plug, 2 Way, Nylon; |Te Connectivity Amp 794894-1 RoHS : Compliant |
| 12,190 | |
| 34894-4009 | Molex | Automotive Housing Conn, Rcpt, 9Pos; Product Range:Mini50 34984 Series; Gender:Receptacle; No. Of Positions:8Positions; For Use With:Molex Ctx50 34905 Sealed Receptacle Terminals; Ip Rating:-; Voltage Rating:-; Current Rating:- Rohs Compliant: Yes RoHS : Compliant |
| 1,600 | ||
| 34894-4001 | Molex | Automotive Housing Conn, Rcpt, 8Pos; Product Range:Mini50 34984 Series; Gender:Receptacle; No. Of Positions:8Positions; For Use With:Molex Ctx50 34905 Sealed Receptacle Terminals; Ip Rating:-; Voltage Rating:-; Current Rating:- Rohs Compliant: Yes RoHS : Compliant |
| 1,600 | ||
| MP24894GJ-P | Monolithic Power Systems | Led Driver, Buck, 1Mhz, Tsot-6; |Monolithic Power Systems (Mps) MP24894GJ-P RoHS : Compliant |
| 892 | ||
| MP24894GJ-P | Monolithic Power Systems | Led Driver, Buck, 1Mhz, Tsot-6; |Monolithic Power Systems (Mps) MP24894GJ-P RoHS : Compliant |
| 892 | ||
| 74489440068 | Wurth Elektronik | Inductor, 6.8Uh 30%, 1.45A, Tdc8038; |Würth Elektronik 74489440068 RoHS : Compliant |
| 668 | ||
| 74489440220 | Wurth Elektronik | Inductor, 22Uh 20%, 1A, Tdc8038; |Würth Elektronik 74489440220 RoHS : Compliant |
| 361 | ||
| 74489440220 | Wurth Elektronik | Inductor, 22Uh 20%, 1A, Tdc8038; |Würth Elektronik 74489440220 RoHS : Compliant |
| 361 | ||
| 5-104894-5 | TE Connectivity | Wtb Connector, Header, 50Pos, 1.27Mm; Connector Systems:Wire-To-Board; Pitch Spacing:1.27Mm; No. Of Rows:2Rows; No. Of Contacts:50Contacts; Contact Termination Type:Surface Mount; Product Range:Ampmodu 50/50 Series; Connector Type:- Rohs Compliant: Yes RoHS : Compliant |
| 282 | ||
| 794894-1 | TE Connectivity | Plug And Socket Connector Housing; Product Range:Mini Universal Mate-N-Lok Series; Gender:Plug; No. Of Positions:2Positions; Pitch Spacing:4.14Mm; For Use With:Mini-Universal Mate-N-Lok Connectors; Body Material:Nylon; Colour:White Rohs Compliant: Yes RoHS : Compliant |
| 136 | ||
| 3-644894-3 | TE Connectivity | 3-644894-3; Available Until Stocks Are Exhausted Alternative Available |Te Connectivity Amp 3-644894-3 RoHS : Compliant |
| 72 | ||
| MP014894 | SPC Multicomp | Cable Tie, Std, 250Mm, Nyl 6.12, Black; |Multicomp Pro MP014894 RoHS : Compliant |
| 40 | ||
| SI4894BDY-T1-GE3 | Vishay Intertechnologies | N Channel Mosfet, 30V, 12A; Transistor P |Vishay SI4894BDY-T1-GE3 RoHS : Compliant |
| 5 | ||
| 4894-227G | MG Chemicals | Solder Wire, 60, 40 Sn, Pb, Leaded, 80°C; |Mg Chemicals 4894-227G RoHS : Not Compliant |
| 3 | ||
| 4894 | Keystone Electronics Corp | Standoff, Round Male, Steel, 6-32; |Keystone 4894 RoHS : Compliant |
| 0 | ||
![]() RS | CHM3DU (4894590) | Eaton Bussmann | 30A RAIL MOUNT FUSE HOLDER FOR 10 X 38MM FUSE, 690 V AC, CHM SERISE |
| 811 | |
| C14G40 (4894556) | Eaton Bussmann | FUSE CARTRIDGE 40A 500VAC NON STD |
| 41 | ||
| DHAS-GB-B14-10-S (1448944) | Festo | BELLOWS FOR GRIPPER, SZ 10 |
| 19 | ||
| C22G63 (4894562) | Eaton Bussmann | FUSE CARTRIDGE 63A 690VAC NON STD |
| 18 | ||
| FWC-6A10F (4894629) | Eaton Bussmann | FUSE 10X38MM 6A HIGH SPEED |
| 12 | ||
| DHAS-GB-B14-14-S (1448946) | Festo | BELLOWS FOR GRIPPER, SZ 14 |
| 6 | ||
| PX0733/PX0734 (489419) | Bulgin | BUCCANEER SEALING CAP KIT OF 2 CAPS |
| 5 | ||
| 2454894 (25532698) (SSCFIA0500175-050RS) | RS Pro | SCREW, 1/2-20 X 1 3/4 SOCKET SET SCREW-CUP POINT PLAIN FINISH |
| 5 | ||
| M4-89-427 (170747) | Brady Worldwide Inc | SELF-LAMINATING VINYL WIRE LABELS, 1-1/2"H X 1/2"W, BLACK ON WHITE/CLEAR |
| 4 | ||
| 4894-227G | MG Chemicals | SNPB 60/40 ROSIN-CORE SOLDER, 0.025" (8 OZ. SPOOL) |
| 3 | ||
| 2084894 | RS Pro | H16A SURFACE MOUNT, HEAVY DUTY POWER CONNECTOR HOUSING, 1 LOCKING LEVER, 2XM25 |
| 2 | ||
| NI10-M18E-AN6X-H1141 (4614894) | TURCK Inc | PROXIMITY SENSOR, 10MM SENSING DISTANCE, 18MM BARREL, NO, NPN, NON-FLUSH |
| 2 | ||
| SMBQ5XFAM10 (804894) | Banner Engineering Corp | ROD BRACKET KIT 10MM, Q5X QM42 PD45 PD49 QC50 SENSOR, ZINC, SHCS, SMB SERIES |
| 1 | ||
| PTB015B2UK45L1PDI1 (913702489401) | Philips Semiconductors | EMERGENCY BALLAST, METAL HOUSING W/O CONDUIT, LED, UL TYPE B |
| 1 | ||
| 4894 | Keystone Electronics Corp | 6-32 SMT THREADED STANDOFF |
| 0 | ||
![]() Microchip Technology Inc | DSC1121BI1-014.8946 | Microchip Technology Inc | MEMS OSC, LVCMOS, 14.8946MHz, 50PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2051-03-29 RoHS : Compliant |
| 0 | |
| DSC1121BI1-014.8946T | Microchip Technology Inc | MEMS OSC, LVCMOS, 14.8946MHz, 50PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2051-03-29 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | MS35489-40X | MS GROMMETS | 3,135 | |||
| MS35489-4 | MS GROMMETS | 2,177 | ||||
| MS35489-40 | MS GROMMETS | 434 | ||||
| MS35489-49 | MS GROMMETS | 217 | ||||
| MS35489-46 | MS GROMMETS | 185 | ||||
| MS35489-41 | MS GROMMETS | 92 | ||||
| MS35489-43 | MS GROMMETS | 90 | ||||
| MS35489-43S | MS GROMMETS | 18 | ||||
| MS35489-48 | MS GROMMETS | 7 | ||||
| MS35489-44 | MS GROMMETS | 4 | ||||
| MS35489-45 | MS GROMMETS | 3 | ||||
| MS35489-42 | MS GROMMETS | 3 | ||||
![]() Rochester Electronics | HEF4894BTT,118![]() | NXP Semiconductors | LED Driver, 12-Segment, PDSO20 RoHS : Compliant |
| 2,536 | |
HEF4894BP,112![]() | NXP Semiconductors | LED Driver, 12-Segment, PDIP20 RoHS : Compliant |
| 1,334 | ||
HEF4894BTT-Q100,11![]() | NXP Semiconductors | Shift Register Shift Register 1 Element 12 Bits 3.3V, 5V, 10V, 12V 20-SOP T/R RoHS : Compliant |
| 480 | ||
NPIC6C4894DY![]() | NXP Semiconductors | Serial In Parallel Out, NPIC Series, 12-Bit, Right Direction, True Output, CMOS, PDSO20 RoHS : Compliant |
| 1,167 | ||
HEF4894BTT,118![]() | Nexperia | LED Driver, 12-Segment, PDSO20 RoHS : Compliant |
| 8,550 | ||
HEF4894BT,112![]() | Nexperia | Liquid Crystal Driver, CMOS, PDSO20 RoHS : Compliant |
| 45 | ||
NPIC6C4894PW-Q100J![]() | Nexperia | Serial In Parallel Out, NPIC Series, 12-Bit, Right Direction, True Output, CMOS, PDSO20 RoHS : Compliant |
| 18,143 | ||
NCP4894DMR2G![]() | onsemi | Audio Amplifier Class AB 1-Channel (Mono) 1.8W 10-SOP T/R RoHS : Compliant |
| 7,582 | ||
NCP4894MNR2G![]() | onsemi | Audio Amplifier Class AB 1-Channel (Mono) 1.8W 10-SON T/R RoHS : Compliant |
| 80,905 | ||
NCP4894FCT1G![]() | onsemi | Audio Amplifier Class AB 1-Channel (Mono) 1.8W 9-BGA T/R RoHS : Compliant |
| 1,600,361 | ||
| CY8C24894-24LTXIT | Infineon Technologies AG | Multifunction Peripheral, CMOS RoHS : Compliant |
| 1,850 | ||
| CY8C24894-24LTXA | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 16kB (16k x 8) 24MHz 56-QFN RoHS : Compliant |
| 4,160 | ||
| CY8C24894-24LTXI | Infineon Technologies AG | IC MCU ARM® Cortex®-M0, ARM® Cortex®-M4F 32Bit 2 Core ROMless 204MHz 144-QFP Tray RoHS : Compliant |
| 21,195 | ||
CY8C24894-24LTXI![]() | Cypress Semiconductor | IC MCU ARM® Cortex®-M0, ARM® Cortex®-M4F 32Bit 2 Core ROMless 204MHz 144-QFP Tray RoHS : Compliant |
| 109 | ||
ML4894ES![]() | Fairchild Semiconductor Corporation | ML4895 - Synchronous Buck Controller RoHS : Not Compliant | 4,582 | |||
![]() Sager | 4894 | Keystone Electronics Corp | Standoffs & Spacers Steel Thread Stdoff .375 6-32 .213/.306 |
| 0 | |
| 3-644894-4 | TE Connectivity | Headers & Wire Housings 04P CST100 SHRD HDR ASSY LF RoHS : Compliant |
| 0 | ||
| 2316489-4 | TE Connectivity | TE Connectivity ON TAPING CT CONNECTOR POST HEADER ASSY |
| 0 | ||
| 8-146489-4 | TE Connectivity | Headers & Wire Housings 68 MODII HDR DRST UNSHRD STKG RoHS : Compliant | 0 | |||
| 1589489-4 | TE Connectivity | Headers & Wire Housings STM025M9HN = THRU-HOLE RoHS : Not Compliant | 0 | |||
| 1-2106489-4 | TE Connectivity | Lighting Connectors 4 Position 20 AWG Thru Hole Closed End RoHS : Compliant |
| 0 | ||
| 0348948010 | Molex | Automotive Connectors MINI50 SLD RCPT ASSLY 2X8 LTGRAY B/16 RoHS : Compliant |
| 0 | ||
| IELBXK1-34894-5-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IELBXK1-34894-50-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 489409000 | C&K Switches | Littelfuse | 0 | |||
| CH4894-000 | TE Connectivity | TE Connectivity STX54AB00-1614 | 0 | |||
| CA1-X0-04-894-311-C | Carling Technologies | Circuit Breakers | 0 | |||
| 3-146489-4 | TE Connectivity | Headers & Wire Housings 68 MODII HDR DRST UNSHRD STKG RoHS : Not Compliant | 0 | |||
| 3-644894-3 | TE Connectivity | Headers & Wire Housings HDR PIN 1X03C VRT CST-100 RoHS : Compliant |
| 0 | ||
| 1654894 | TE Connectivity | TE Connectivity EJT SERIES (PIK) | 0 | |||
![]() ComSIT USA | HEF4894BT![]() | NXP Semiconductors | 12-STAGE SHIFT-AND-STORE REGISTER, LED DRIVER LED Driver RoHS : Compliant | 13,630 | ||
| SI4894BDYT1GE3 | Vishay Intertechnologies | 30-V N-CHANNEL (D-S) MOSFET Small Signal Field-Effect Transistor, 8.9A I(D), 30V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 3,915 | |||
| LM4894MMNOPB | National Semiconductor Corporation | 1 WATT FULLY DIFFERENTIAL AUDIO POWER AMPLIFIER WITH SHUTDOWN SELECT Audio Amplifier, 1W, 1 Channel(s), 1 Func, PDSO10 RoHS : Compliant | 2,000 | |||
| HEF4894BPS410 | Philips E C G Inc | 12-STAGE SHIFT-AND-STORE REGISTER, LED DRIVER LED Driver, 12-Segment, PDIP20 RoHS : Compliant | 702 | |||
| CY8C2489424LFXI | Cypress Semiconductor | PSOC PROGRAMMABLE SYSTEM-ON-CHIP Multifunction Peripheral, CMOS RoHS : Compliant | 12 | |||
![]() Interstate Connecting Components | 3-644894-3 | TE Connectivity | 03P CST100 SHRD HDR ASSY LF RoHS : Compliant |
| 1,537 | |
| 34894-4009 | Molex | MINI50 SLD RCPT ASMLY 2X4 BLAC |
| 400 | ||
| 000489410 | ITT Interconnect Solutions | FRCIR08F-14S-6S-F80-VO | 0 | |||
| 3-644894-4 | TE Connectivity | 04P CST100 SHRD HDR ASSY LF RoHS : Compliant |
| 0 | ||
| 4-1614894-3 | TE Connectivity | CPF 0805 487K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2316489-4 | TE Connectivity | ON TAPING CT CONNECTOR POST HE | 0 | |||
| NB24894001 | TE Connectivity | RP-4800-NO.2-4-SP RoHS : Compliant | 0 | |||
7-1614894-7![]() | TE Connectivity | CPF0805 2M0 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| 1-1614894-7 | TE Connectivity | CPF 0805 261K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1-2106489-4 | TE Connectivity | Connector Thru Hole-IDC 4 pos 20AWG RoHS : Compliant |
| 0 | ||
| 5-104894-1 | TE Connectivity | 10 50/50 GRID RA HDR LF RoHS : Compliant |
| 0 | ||
| 4-1437489-4 | TE Connectivity | 7022MKI=28VDC 1-300SEC RoHS : Not Compliant |
| 0 | ||
| 2-2176489-4 | TE Connectivity | HCL130 70W 270R 5% CABLE 150MM RoHS : Compliant |
| 0 | ||
| 4-1614894-2 | TE Connectivity | CPF 0805 475K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 3-644894-2 | TE Connectivity | 02P CST100 SHRD HDR ASSY LF RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | 2316489-4 | TE Connectivity | Connectors |
| 25,410 | |
| 1-2106489-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 9,105 | ||
| 3-2106489-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 4,158 | ||
| 6-1614894-9 | TE Connectivity | Resistors RoHS : Compliant |
| 1,320 | ||
| 5-1614894-9 | TE Connectivity | Resistors RoHS : Compliant |
| 647 | ||
| 104894-5 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 567 | ||
| 5-104894-1 | TE Connectivity | Electronic Component RoHS : Compliant |
| 396 | ||
| 1-1614894-9 | TE Connectivity | Resistors RoHS : Compliant |
| 370 | ||
| 104894-3 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 343 | ||
| 5-104894-7 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 257 | ||
| 3-644894-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 34 | ||
| 794894-1 | TE Connectivity | Mini UMNL - Plug and RoHS : Compliant |
| 23 | ||
| 2106489-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 22 | ||
| 104894-8 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 20 | ||
| 248942-000 | TE Connectivity | connector accessories RoHS : Compliant |
| 12 | ||
![]() Chip 1 Exchange | M64894GP | MIT | INSTOCK | 80,004 | ||
M64894GP![]() | Mitsubishi Electric | INSTOCK RoHS : Not Compliant | 69,000 | |||
| 794894-1 | TE Connectivity | INSTOCK RoHS : Compliant | 13,218 | |||
| NCP4894DMR2G | INSTOCK | 3,857 | ||||
| MS35489-4 | INSTOCK | 500 | ||||
![]() Avnet Abacus | 794894-1 | TE Connectivity | Connector Housing Power Plug 2 Position 414 mm Straight Cable Mount Bulk (Alt: 794894-1) RoHS : Compliant | 11,557 | ||
| 644894-6 | TE Connectivity | Conn Shrouded Header HDR 6 POS 254mm Solder RA ThruHole (Alt: 644894-6) RoHS : Compliant | 0 | |||
| 644894-5 | TE Connectivity | (Alt: 644894-5) RoHS : Compliant | 0 | |||
| 348944001 | Molex | Connector Housing Sealed Receptacle 8 Position 18mm Crimp Straight Cable Mount Bag (Alt: 348944001) RoHS : Compliant | 0 | |||
| 3-644894-4 | TE Connectivity | (Alt: 3-644894-4) RoHS : Compliant | 0 | |||
| 8-146489-4 | TE Connectivity | (Alt: 8-146489-4) RoHS : Compliant | 0 | |||
| NB24894001 | TE Connectivity | RP4800NO24SP (Alt: NB24894001) RoHS : Compliant | 0 | |||
| 5-104894-1 | TE Connectivity | Conn Shrouded Header HDR 10 POS 127mm Solder RA SMD Tube (Alt: 5-104894-1) RoHS : Compliant | 0 | |||
| 5-104894-1 | TE Connectivity | Conn Shrouded Header HDR 10 POS 127mm Solder RA SMD Tube (Alt: 5-104894-1) RoHS : Compliant | 0 | |||
| 1-2106489-4 | TE Connectivity | (Alt: 1-2106489-4) RoHS : Compliant | 0 | |||
| 1-2106489-4 | TE Connectivity | (Alt: 1-2106489-4) RoHS : Compliant | 0 | |||
| 4-1437489-4 | TE Connectivity | (Alt: 4-1437489-4) RoHS : Not Compliant | 0 | |||
| 4-1437489-4 | TE Connectivity | (Alt: 4-1437489-4) RoHS : Not Compliant | 0 | |||
| 2-2176489-4 | TE Connectivity | Resistor Power Wirewound 270 Ohm 5 70W 80ppmC to 200ppmC Aluminum Housed Wire Leaded BoxCar (Alt: 2-2176489-4) RoHS : Not Compliant | 0 | |||
| 009176004894906 | Kyocera AVX Components | (Alt: 009176004894906) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2494894-8 | TE Connectivity | 800G OSFP TO 2X400G OSFP RHS DAC CABLE P (Alt: 2494894-8) RoHS : Compliant | 0 | ||
| 1-2494894-1 | TE Connectivity | 800G OSFP-IHS TO 2XOSFP-RHS, 30AWG, 1.5M (Alt: 1-2494894-1) RoHS : Compliant | 0 | |||
| 1-2494894-0 | TE Connectivity | 800G OSFP TO 2X400G OSFP RHS DAC CABLE P (Alt: 1-2494894-0) RoHS : Compliant | 0 | |||
| 2494894-7 | TE Connectivity | 800G OSFP-IHS TO 2XOSFP-RHS, 30AWG, 2.0M (Alt: 2494894-7) RoHS : Compliant | 0 | |||
| 794894-1 | TE Connectivity | (Alt: 794894-1) RoHS : Compliant | 0 | |||
| 5-104894-4 | TE Connectivity | (Alt: 5-104894-4) RoHS : Compliant | 0 | |||
| SI4894BDY-T1-E3 | Vishay Intertechnologies | (Alt: SI4894BDY-T1-E3) RoHS : Compliant | 0 | |||
HEF4894BT,118![]() | Nexperia | Shift Register, HEF4894B, Serial to Parallel, Serial to Serial, 1 Element, 12 -Bit, 20 Pins, SOIC (Alt: HEF4894BT,118) RoHS : Compliant | 0 | |||
| 2494894-9 | TE Connectivity | 800G OSFP TO 2X400G OSFP RHS DAC CABLE P (Alt: 2494894-9) RoHS : Compliant | 0 | |||
| 1744489-4 | TE Connectivity | (Alt: 1744489-4) RoHS : Compliant | 0 | |||
7-1614894-7![]() | TE Connectivity | (Alt: 7-1614894-7) RoHS : Compliant | 0 | |||
![]() Avnet Silica | HEF4894BT,118![]() | Nexperia | Shift Register HEF4894B Serial to Parallel Serial to Serial 1 Element 12 Bit 20 Pins SOIC (Alt: HEF4894BT,118) RoHS : Compliant | 2,000 | ||
| MP24894GJ-P | Monolithic Power Systems | (Alt: MP24894GJ-P) RoHS : Compliant | 0 | |||
| MP24894GJ-Z | Monolithic Power Systems | (Alt: MP24894GJ-Z) RoHS : Compliant | 0 | |||
HEF4894BTT,118![]() | Nexperia | Shift Register HEF4894B Serial to Parallel Serial to Serial 1 Element 12 Bit 20 Pins TSSOP (Alt: HEF4894BTT,118) RoHS : Compliant | 0 | |||
| RAA489400A3GNP#HA0 | Renesas Electronics Corporation | (Alt: RAA489400A3GNP#HA0) RoHS : Compliant | 0 | |||
HEF4894BT-Q100,118![]() | Nexperia | Shift Register HEF4894B Serial to Parallel Serial to Serial 1 Element 12 Bit 20 Pins SOIC (Alt: HEF4894BT-Q100,118) RoHS : Compliant | 0 | |||
| RAA489400A3GNP#MA0 | Renesas Electronics Corporation | (Alt: RAA489400A3GNP#MA0) RoHS : Compliant | 0 | |||
| HEF4894BTT-Q100,118 | Nexperia | Shift Register HEF4894B Serial to Parallel Serial to Serial 1 Element 12 Bit 20 Pins TSSOP (Alt: HEF4894BTT-Q100,11) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 8448940000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | |
![]() DB Roberts | MS35489-43 | Military Specifications |
| 571 | ||
| MS35489-4X | Military Specifications |
| 442 | |||
| MS35489-46 | Military Specifications |
| 33 | |||
| 464894 | Essentra Components | 0 | ||||
| 14894 | Heyco | BRASS CGHT NPT 1/4-080 | 0 | |||
![]() EBV Elektronik | BCM84894B0KFSBG | Broadcom Limited | (Alt: BCM84894B0KFSBG) RoHS : Compliant | 0 | ||
| BCM84894B0IFSBG | Broadcom Limited | 17X17 QUAD 10G5G25G W HS (Alt: BCM84894B0IFSBG) RoHS : Compliant | 0 | |||
| SI4894BDY-T1-E3 | Vishay Intertechnologies | (Alt: SI4894BDY-T1-E3) RoHS : Compliant | 0 | |||
| CY8C24894-24LTXI | Infineon Technologies AG | MCU 8Bit PSoC M8C CISC 16KB Flash 33V5V 56Pin QFN Tray (Alt: SP005639507) RoHS : Compliant | 0 | |||
| SI4894BDY-T1-GE3 | Vishay Intertechnologies | (Alt: SI4894BDY-T1-GE3) RoHS : Compliant | 0 | |||
| BCM84894MA0IFSBG | Broadcom Limited | Quad 10G MACsec PHY Itemp (Alt: BCM84894MA0IFSBG) RoHS : Compliant | 0 | |||
| B0489-4 4XIMX219 | ArduCam | V3Link Camera Kit for TI (Alt: B0489-4 4XIMX219) RoHS : Compliant | 0 | |||
| CY8C24894-24LTXIT | Infineon Technologies AG | (Alt: SP005639509) RoHS : Compliant | 0 | |||
![]() Master Electronics | 7-1614894-7![]() | TE Connectivity | CPF0805 2M0 0.1% 25PPM 5K RL RoHS : Compliant |
| 25,000 | |
| 3-644894-4 | TE Connectivity | 04P CST100 SHRD HDR ASSY LF RoHS : Compliant |
| 7,620 | ||
| 8448940000 | Weidmüller Interface GmbH & Co. KG | Surge Suppressors 24VDC DIN Rail RoHS : Compliant |
| 1 | ||
| 000489410 | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| 489438N002 | TE Connectivity | Heat Shrink Molded Boot Y Style MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-1614894-3 | TE Connectivity | CPF 0805 487K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 8-146489-4 | TE Connectivity | 68 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Compliant |
| 0 | ||
| 7010348946 | 3M Interconnect | 3M Boardmount Socket 929 Seri 939850-01-05-RA RoHS : Compliant |
| 0 | ||
| 999-34894-001 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| NB24894001 | TE Connectivity | RP-4800-NO.2-4-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| IDSD-36-S-48.94-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 7010348945 | 3M Interconnect | 7010348945 80000917379 80/2R/BM SKT/.100/STR/.125/30A RoHS : Compliant |
| 0 | ||
| 1-1614894-7 | TE Connectivity | CPF 0805 261K 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 000489470 | ITT Interconnect Solutions | FRCIR06R-36A-22S-F80-T12 RoHS : Not Compliant |
| 0 | ||
| 4-1437489-4 | TE Connectivity | 7022MKI=28VDC 1-300SEC MOQ Reduction RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 4894-227G | MG Chemicals | Solder 23AWG .025IN DIA 1/2lb. SPOOL |
| 14 | |
| 2764894 | Phoenix Contact | Enclosures, Boxes, & Cases EG 67.5-A/TBS GN RoHS : Compliant |
| 3 | ||
| 8448940000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories MCZ OVP SL 24VDC 0,5A RoHS : Compliant |
| 1 | ||
| 1714894 | Phoenix Contact | Board to Board & Mezzanine Connectors FP 1,27/ 26-FV 6,25 RoHS : Compliant |
| 0 | ||
1424894![]() | Phoenix Contact | Sensor Cables / Actuator Cables SAC-4P-MS/ 0,5-547/ FR SCO BK RoHS : Compliant |
| 0 | ||
| AXG94894 | Axiom Manufacturing | AXIOM MPO-MPO OM3 M/M FIBER CABLE 50M |
| 0 | ||
![]() Pasternack Enterprises US | PE4894 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: MCX, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: 2 Hole Flange, Interface Type 1: Pin. MCX Jack Connector Solder Attachment 2 Hole Flange Mount Pin Terminal, .328 inch Hole Spacing. PE4894 MCX jack 2 hole flange terminal connector has an interface type of pin and a 50 Ohm impedance. Pasternack MCX jack 2 hole flange connector uses shield/contact solder as an attachment method. The Pasternack MCX jack 2 hole flange terminal connector has a PTFE dielectric type. The Pasternack MCX terminal connector has a brass body with gold plating. This MCX jack 2 hole flange terminal RF connector is REACH compliant. This Pasternack jack MCX 2 hole flange connector will ship the same day as purchased. Our 2 hole flange MCX jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom MCX connector cable assemblies that will ship the same day as well. |
| 9 | |
| PE3MSA00489-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free Bend Relief 3-Lug TRB Non-Insulated Bulkhead Jack with Blunt Cut for PE-30-02003, 48" Cable., Radio frequency assembly lead free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00489-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00489-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00489-48 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free bend relief 3-Lug TRB non-insulated bulkhead jack with blunt cut for PE-30-02003, 48" cable. |
| 5 | ||
| PE7489-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 10 Watts Up to 26.5 GHz. PE7489-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7489-40 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 40 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7489-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE3C6489-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX002, RF Cable Type: PE-SR047TNLL, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.92mm Male to 2.92mm Male Low Loss Cable 48 Inch Length Using 047 Coax., Radio frequency assembly 2.92mm male to 2.92mm male low loss cable 48 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 2.92mm male to 2.92mm male low loss cable 48 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our low loss 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C6489-48, can also be known as a low loss 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6489-48 is built with PE-SR047TNLL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male low loss cable 48 inch length using 047 coax. |
| 2 | ||
| PE3W14894 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to BNC Male Cable Using LMR-195 Coax. PE3W14894 is a TNC female bulkhead to BNC male cable using LMR-195 coax. This Pasternack TNC female bulkhead to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our female TNC bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14894 TNC female bulkhead to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4894-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894-12, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894-12 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 12 inch length using RG405 coax. |
| 0 | ||
| PE3C4894-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 24 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894-24, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894-24 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 24 inch length using RG405 coax. |
| 0 | ||
| PE3C4489-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to SSMC Plug Right Angle Cable 48 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly N male to SSMC plug right angle cable 48 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SSMC plug right angle cable 48 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle SSMC cable connection on the other. Our type N to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This type N to SSMC cable is a male to plug coax assembly, PE3C4489-48, can also be known as a type N plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. N type plug to SSMC male cable assembly PE3C4489-48 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable N cable assembly is manufactured with N type to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency type N male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4489-48 can also be used in the other direction and will be right angle SSMC plug to type N male cable assembly if the opposite connectivity is required. N type plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SSMC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SSMC plug right angle cable 48 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W24894 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400-FR Coax. PE3W24894 is a N male to N male right angle cable using LMR-400-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24894 N male to N male right angle cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4894 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable using RG405 coax. | 0 | |||
| PE3C4894-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 60 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894-60, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894-60 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894-60 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 60 inch length using RG405 coax. |
| 0 | ||
| PE3C4894-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 36 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894-36, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894-36 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 36 inch length using RG405 coax. |
| 0 | ||
| PE3W04894 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMP Female Right Angle Cable Using PE-SR405FLJ Coax. PE3W04894 is a SMA female bulkhead to SMP female right angle cable using PE-SR405FLJ coax. This Pasternack SMA female bulkhead to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04894 SMA female bulkhead to SMP female right angle cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C9489-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SHV Plug Right Angle to SHV Jack Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly SHV plug right angle to SHV jack cable 48 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug right angle to SHV jack cable 48 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SHV cable connection on one end and SHV cable connection on the other. Our right angle SHV to SHV cable assemblies have a plug gender on end 1 and jack on end 2. PE3C9489-48 can also be known as a right angle SHV male to SHV female cable assembly and will be shipped same-day as it is purchased. SHV male to SHV female cable assembly PE3C9489-48 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with right angle SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV right angle plug to SHV jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9489-48 can also be used in the other direction and will be SHV jack to right angle SHV plug cable assembly if the opposite connectivity is required. SHV right angle male to SHV female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug right angle to SHV jack cable 48 inch length using RG58 coax. |
| 0 | ||
| PE3C4894-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and SMP cable connection on the other. Our BMA to SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4894-6, can also be known as a BMA female to SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4894-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with BMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack 2 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4894-6 can also be used in the other direction and will be SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female cable 6 inch length using RG405 coax. |
| 0 | ||
![]() Vyrian | 74489430220 | Wurth Elektronik | General Purpose Inductor, 22uH, 20%, 2 Element, Ferrite-Core, SMD, 3131 | 15,582 | ||
| 1914894 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,336 | |||
| 1776489-4 | TE Connectivity | Strip Terminal Block, 10A, 2mm2, 1 Row(s) RoHS : Compliant | 10,988 | |||
| 2764894 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 9,750 | |||
| 1804894 | Phoenix Contact | Barrier Strip Terminal Block, 20A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,111 | |||
| 1748943 | Phoenix Contact | Barrier Strip Terminal Block, 41A, 6mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,110 | |||
| 2-1776489-4 | TE Connectivity | Strip Terminal Block, 10A, 2mm2, 1 Row(s) RoHS : Compliant | 8,506 | |||
| 2N4894 | Texas Instruments | Unijunction Transistor, 1uA I(P) RoHS : Not Compliant | 8,431 | |||
LM4894MMX![]() | Texas Instruments | Audio Amplifier, 1 Func, PDSO10 RoHS : Not Compliant | 8,368 | |||
| 5962-01-248-9486 | Texas Instruments | Multiplexer, 1-Func, 8 Line Input, TTL, PDIP16 RoHS : Not Compliant | 6,161 | |||
| 5-104894-1 | TE Connectivity | Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator RoHS : Compliant | 5,721 | |||
LM4894MMX/NOPB![]() | Texas Instruments | Audio Amplifier, 1 Func, PDSO10 RoHS : Compliant | 5,272 | |||
| 5962-00-548-9429 | Texas Instruments | AND-OR-Invert Gate, TTL, CDIP14 RoHS : Not Compliant | 5,079 | |||
| 5962-01-248-9489 | Texas Instruments | Binary Counter, Synchronous, Bidirectional, TTL, PDIP16 RoHS : Not Compliant | 4,983 | |||
| 5962-01-056-4894 | Texas Instruments | NAND Gate, TTL, CDIP14 RoHS : Not Compliant | 3,085 | |||
![]() Waytek, Inc. | 15544894 | Aptiv PLC | HES Circular Connector 31 PIN Dress Plug Female Orange DEUTSCH HDP Replaced 38795 |
| 1,128 | |
| 148943-91W | General Cable Technologies Corporation | 14GA SXL Tan Cross-Link Automotive Wire XLPE -51C to 125C |
| 500 | ||
| 148944-91W | General Cable Technologies Corporation | 18GA SXL Lt Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 0 | ||
![]() Win Source Electronics | 794894-1 | TE Connectivity | CONN PLUG HSG 2POS MINI UMNL / 2 Rectangular Connectors - Housings Plug Natural RoHS : Compliant |
| 9,778 | |
CY8C24894-24LTXI![]() | Cypress Semiconductor | IC MCU 8BIT 16KB FLASH 56QFN RoHS : Compliant |
| 8,000 | ||
CY8C24894-24LTXIT![]() | Cypress Semiconductor | PSoC Programmable System-on-Chip RoHS : Compliant |
| 7,230 | ||
| HEF4894BT-Q100 | Nexperia | NOW NEXPERIA HEF4894BT-Q100 - LE / LED Driver IC Output Dimming RoHS : Compliant |
| 6,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |