| Os motores de busca de Datasheet de Componentes eletrônicos |
|
4863G-S16-R Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() TME | 5748634-1 | TE Connectivity | Connector: D-Sub HD; PIN: 15; socket; male,female; data transfer RoHS : Compliant |
| 21,670 | |
| 1144863 | Bossard Group | Washer; spring,conical; h=0.6mm; M2; D=5mm; spring steel; DIN 6796 |
| 288 | ||
| 4863 | BM Group spa | Nut; M63; polyamide; 75mm; grey; Pitch: 1.5 |
| 15 | ||
| 24863-00 | Honeywell Sensing and Control | Sensor: flow |
| 10 | ||
| 4863 | Keystone Electronics Corp | Spacer sleeve; 6.35mm; Int.thread: UNC4-40; cylindrical; push-in |
| 0 | ||
| 10048632 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 4; THT; 3A; 250V |
| 0 | ||
| 486 3MHP 9 | OPTIBELT GmbH | Timing belt; 3MHP; 486mm; metric; OMEGA HP |
| 0 | ||
| 4863P | KING TONY | Reduction; impact; Size: 1/2"F,3/8"M |
| 0 | ||
| 10048631 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 4; THT; 3A; 250V |
| 0 | ||
| GN 114.8-6-30 | Elesa+Ganter | Locking pin; with locking; stainless steel; Ø: 6mm; 17000N |
| 0 | ||
| 11G4863 | Lovato Electric Inc | Auxiliary contacts; side; Contacts: (NC + NO) lagging; Range: 3s |
| 0 | ||
| 1148630000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 19A RoHS : Compliant |
| 0 | ||
| 1754863 | Phoenix Contact | Connector: pluggable terminal block; plug; female; power supply RoHS : Compliant |
| 0 | ||
848633-001![]() | TE Connectivity | Heat shrink cap; polyolefine RoHS : Compliant |
| 0 | ||
| 100024863 | Telegartner Karl Gartner GmbH | Connector: SMB; plug; coaxial; angled; 50Ω; soldering; brass |
| 0 | ||
![]() Avnet Americas | TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Correction CONTRLR 0.02mA 8-Pin DSO - Tape and Reel (Alt: TDA4863GXUMA2) RoHS : Compliant |
| 7,500 | |
| 2-644486-3 | TE Connectivity | - Bag (Alt: 2-644486-3) RoHS : Compliant |
| 300 | ||
| C10-737486-3AS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS3) RoHS : Not Compliant | 50 | |||
| C10-737486-3YS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS4) RoHS : Not Compliant | 46 | |||
| C10-737486-3AS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS4) RoHS : Not Compliant | 37 | |||
| C10-737486-3YS3 | Amphenol Corporation | - Bag (Alt: C10-737486-3YS3) RoHS : Not Compliant | 37 | |||
| FAN48632UC35X | onsemi | - Tape and Reel (Alt: FAN48632UC35X) RoHS : Not Compliant |
| 0 | ||
| 7000148639 | 3M Interconnect | 7000148639 - Cable Rools/Shrink Tubing (Alt: 7000148639) RoHS : Not Compliant |
| 0 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | - Trays (Alt: MKP1848630094Y2) RoHS : Compliant |
| 0 | ||
| XLH735048.636149X | SiTime Corporation | - Tape and Reel (Alt: XLH735048.636149X) RoHS : Compliant | 0 | |||
| MKP1848630094Y5 | Vishay Intertechnologies | - Trays (Alt: MKP1848630094Y5) RoHS : Compliant |
| 0 | ||
| MAL210486332E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, 3300 uF, 400 V, ? 20%, Screw - Boxed Product (Development Kits) (Alt: MAL210486332E3) RoHS : Compliant |
| 0 | ||
| FAN48630BUC31JX | onsemi | - Tape and Reel (Alt: FAN48630BUC31JX) RoHS : Compliant | 0 | |||
| 170M4863D | Eaton Corporation | - Bulk (Alt: 170M4863D) RoHS : Not Compliant |
| 0 | ||
| 5159009486394AAKLF | Amphenol Corporation | - Trays (Alt: 5159009486394AAKLF) RoHS : Compliant |
| 0 | ||
![]() Newark | 284863-1 | TE Connectivity | Single Wire Seal, Orange, Silicone; |Te Connectivity Amp 284863-1 RoHS : Compliant |
| 22,843 | |
| MP014863 | SPC Multicomp | Conn Housing, Rcpt, 5Pos, 1Row, 1.25Mm; |Multicomp Pro MP014863 RoHS : Compliant |
| 3,000 | ||
| 2-644486-3 | TE Connectivity | Conn, Header, 3Pos, 1Row, 2.54Mm; |Te Connectivity Amp 2-644486-3 RoHS : Compliant |
| 2,947 | ||
| 354863-E | TE Connectivity | Microstac; |Te Connectivity Erni 354863-E RoHS : Compliant |
| 1,250 | ||
| 014.86.353 | ETTINGER | Mounting Brackets, 15X12-M3; |Ettinger 014.86.353 RoHS : Compliant |
| 1,229 | ||
| 354863-E | TE Connectivity | Microstac; |Te Connectivity Erni 354863-E RoHS : Compliant |
| 400 | ||
| 2-644486-3 | TE Connectivity | Wire-Board Connector Header 3 Position, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:Mta-100 Series Rohs Compliant: Yes RoHS : Compliant |
| 103 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | Film Capacitor, 30Uf, 900V, Radial; |Vishay MKP1848630094Y2 RoHS : Compliant |
| 45 | ||
| DEL-5748634-1 | TE Connectivity | Connector, D Sub, Female; Available Until Stocks Are Exhausted Alternative Available |Te Connectivity Amp DEL-5748634-1 RoHS : Compliant |
| 37 | ||
| MKP1848630924Y5 | Vishay Intertechnologies | Film Capacitor, 30Uf, 1.2Kv, Radial; |Vishay MKP1848630924Y5 RoHS : Compliant |
| 30 | ||
| FMCA2486-36 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2486-36 RoHS : Not Compliant |
| 16 | ||
| 20848-636 | nVent Schroff | Rear Panel, 128.4Mm X 426.4Mm, Aluminium; Panel Type:Rear Panel; Rack U Height:3U; Panel Material:Aluminum; Body Color:-; For Use With:Ratiopacpro Desktop Cases; External Height - Metric:128.4Mm; External Width - Metric:426.4Mm Rohs Compliant: Yes RoHS : Compliant |
| 14 | ||
| 009176004863906 | Kyocera AVX Components | Connector, Receptacle, 4Pos, 1Row, 3.2Mm; |Kyocera Avx 009176004863906 RoHS : Compliant |
| 5 | ||
| 4863 | Adafruit Industries | Adafruit Cyberdeck Hat For Raspberry Pi 400 & 500 |Adafruit 4863 RoHS : Not Compliant |
| 0 | ||
| 4863 | Keystone Electronics Corp | Broaching Type Force-Fit Threaded Stando; |Keystone 4863 RoHS : Compliant |
| 0 | ||
![]() RS | 4548-632-AL | RAF Electronic Hardware | HEX MALE-FEMALE STANDOFF;1/4 HEX X 1-3/8 LENGTH |
| 212 | |
| 486306 | RS Pro | MANUAL BALL VALVE 2-WAY NICKEL PLATED BRASS 22MM BSPP COMPRESSION 232PSI |
| 94 | ||
| 4548-632-SS | RAF Electronic Hardware | STANDOFF; 1/4 HEX MALE/FEMALE; 6-32 THREAD;STAINLESS STEEL; 1.375LENGTH |
| 51 | ||
| 5448637 (BCP-508- 4 GN) | Phoenix Contact | PCB CONNECTOR PLUG SCREW 5.08MM 12AWG 320V 12A 4 POSITION |
| 48 | ||
| 486334 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/4 |
| 40 | ||
| 486344 | RS Pro | 28MM MANUAL BALL VALVE NICKEL PLATED BRASS 28 MM BSPP |
| 23 | ||
| 486366 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 3/8 |
| 12 | ||
| 3048632 (UK 10 3-CC HESILED N 600 3POL) | Phoenix Contact | LEVER-TYPE FUSE TERMINAL BLOCK UK SERIES |
| 9 | ||
| 1424863 | Phoenix Contact | HC-STA-B48-BWS-EMC-AL RoHS : Compliant |
| 3 | ||
| 2834863 | RS Pro | M8 TO ACTUATOR/SENSOR CABLE, STRAIGHT FEMALE 3 WAY, PVC, BLACK, 15M |
| 2 | ||
| 548630 (ISOTP70M16) | nVent ERIFLEX | INSULATOR ISO TP 70M16 |
| 2 | ||
| 486340 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 3/8 |
| 1 | ||
| 486350 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/2 |
| 1 | ||
| 4863 | Adafruit Industries | ADAFRUIT CYBERDECK HAT FOR RASPBERRY PI 400 |
| 0 | ||
| 4863 | Keystone Electronics Corp | STANDOFF, FORCE-FIT, ROUND, THREADED 4-40, LENGTH .250, OD .219, STAINLESS STEEL |
| 0 | ||
![]() Microchip Technology Inc | 2N4863 | Microchip Technology Inc | Power BJT _ TO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
| 999-48630-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRUPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRUPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48637-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48637-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
![]() Rochester Electronics | FAN48632UC33X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.3V, 3.49V 1.5A 16-BGA T/R RoHS : Compliant |
| 30,000 | |
| FAN48630BUC31JX | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.6V 1.5A 16-BGA T/R RoHS : Compliant |
| 54,358 | ||
| FAN48632UC35X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.5V, 3.7V 1.5A 16-BGA T/R RoHS : Compliant |
| 240,000 | ||
| FAN48630BUC33X | onsemi | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 6,000 | ||
| FAN48630BUC34X | onsemi | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 15,000 | ||
| FAN48630UC45X | onsemi | IC VOLT REG Fixed Step-Up Boost 1 OUT 4.5V, 4.76V 1.5A 16-BGA T/R RoHS : Compliant |
| 8,830 | ||
| NTD4863NT4G | onsemi | MOSFET N-Channel 25V 9.2A (Ta), 49A (Tc) TO-252-3 T/R RoHS : Compliant |
| 180,925 | ||
TDA4863![]() | Infineon Technologies AG | Power Factor Correction Discontinuous Conduction (DCM) 22V 8-DIP Tube RoHS : Compliant |
| 640 | ||
| TDA48632XKLA1 | Infineon Technologies AG | Power Factor Correction Discontinuous Conduction (DCM) 22V 8-DIP Tube RoHS : Compliant |
| 11,393 | ||
| FAN48630BUC31JX | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 3.15V, 3.6V 1.5A 16-BGA T/R RoHS : Compliant |
| 73,700 | ||
| FAN48630BUC33X | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max, PBGA16 RoHS : Compliant |
| 134,729 | ||
| FAN48630BUC34X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 2,837,700 | ||
| FAN48630BUC3AJX | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max RoHS : Compliant |
| 18,000 | ||
| FAN48630UC45X | Fairchild Semiconductor Corporation | IC VOLT REG Fixed Step-Up Boost 1 OUT 4.5V, 4.76V 1.5A 16-BGA T/R RoHS : Compliant |
| 8,473 | ||
| LM4863N | National Semiconductor Corporation | LM4863 - Boomer Audio Power Series Dual 2.2W Audio Amplifier Plus Stereo Headphone Function RoHS : Not Compliant | 489 | |||
![]() Sager | 4863 | Keystone Electronics Corp | Standoffs & Spacers .25L 4-40 FORCE FIT |
| 0 | |
| 0448.630MR | Littelfuse Inc | FUSE 125V V/FA NANO2 LEAD-FREE .630A RoHS : Compliant |
| 0 | ||
| 2248631000 | Molex | NEXTSTREAM 8X LE TO RE G6 300MM |
| 0 | ||
| 1974863 | Phoenix Contact | Pluggable Terminal Blocks 15 Pos 5mm pitch Plug 24-12AWG Spring RoHS : Compliant |
| 0 | ||
| 6-146486-3 | TE Connectivity | Headers & Wire Housings 26 MODII HDR DRST UNSHRD STKG RoHS : Compliant | 0 | |||
| CN1-X0-22-048-63H-H | Carling Technologies | Circuit Breakers | 0 | |||
| 55A4863-22-A973-9 | TE Connectivity | TE Connectivity | 0 | |||
| 3-1589486-3 | TE Connectivity | Rectangular MIL Spec Connectors STM025L84CN = SMT CONN RoHS : Not Compliant | 0 | |||
| 208486-3 | TE Connectivity | Standard Circular Connector CMC PLUG 22-14 RoHS : Compliant |
| 0 | ||
| 1404863 | Phoenix Contact | Multi-Conductor Cables SAC-8P-500 0-94D RoHS : Compliant |
| 0 | ||
| 1414863 | Phoenix Contact | Sensor Cables / Actuator Cables 5POS Power Cable Gray 10m RoHS : Compliant |
| 0 | ||
| 1214486-3 | TE Connectivity | Other Tools COVER SHEAR DIE | 0 | |||
| CT94863001 | TE Connectivity | Labels and Industrial Warning Signs TE-HAZ07-152-0.5 | 0 | |||
| 2-5583486-3 | TE Connectivity | Standard Card Edge Connectors CONN TWIN LEAF 28POS 156 C/L | 0 | |||
| 170M4863D | Eaton Bussmann | Specialty Fuses 450A 690V aR DIN 1 HSDNH |
| 0 | ||
![]() ComSIT USA | TDA48632G | Infineon Technologies AG | POWER FACTOR CONTROLLER IC FOR HIGH POWER FACTOR AND LOW THD Power Factor Controller, BIPolar, PDSO8 RoHS : Compliant | 1,810 | ||
| LM4863MTE | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 643 | |||
| LM4863MT | National Semiconductor Corporation | DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 404 | |||
| MKP1848635704P5 | Wima | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 35uF, Through Hole Mount RoHS : Compliant | 63 | |||
![]() Interstate Connecting Components | 4548-632-S-28 | RAF Electronic Hardware | HEX M-F STANDOFFS 1/4 HEX X 1-3/8 LENGTH |
| 75 | |
| 10-737486-3AS3 | Amphenol Industrial Operations | ELFIN 3+2 , PLUG 6SQMM | 0 | |||
| 2486345-1 | TE Connectivity | KNURLED NUT M4 ELESA REWORK | 0 | |||
| 10-737486-3AS2 | Amphenol Industrial Operations | ELFIN 3+2 , PLUG 4SQMM | 0 | |||
| 208486-3 | TE Connectivity | CMC PLUG ASSEMBLYSZ 22 RoHS : Compliant |
| 0 | ||
| 5159009486394AAKLF | Amphenol FCi | DIN PWR HDR RA STB F RoHS : Compliant |
| 0 | ||
848633-001![]() | TE Connectivity | CABLE ENTRY SEALS 848633-001 RoHS : Compliant |
| 0 | ||
| 00160848639 | ITT Interconnect Solutions | 48317-32T39 | 0 | |||
| 348631-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A1843-20-MSL4-9CS227 RoHS : Compliant | 0 | |||
| 3-1658486-3 | TE Connectivity | MSB0.80RC-ASY84DP,GP,30,VCTY RoHS : Compliant |
| 0 | ||
| 284863-1 | TE Connectivity | SINGLE WIRE SEAL F.EXT.INS.DIA RoHS : Compliant |
| 0 | ||
| SA85004863925 | SOURIAU-SUNBANK | 0 | ||||
| 794863-1 | TE Connectivity | 05P UMNL CAP HSG,BLACK |
| 0 | ||
| 234863-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR40BW00-1006BI RoHS : Compliant | 0 | |||
| 1-1658486-3 | TE Connectivity | MSB0.80RC-ASY84DP,-,30,VCTY RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | CA-628486-30807 | Amphenol Corporation |
| 0 | ||
![]() Powell Electronics | 284863-1 | TE Connectivity | Connectors RoHS : Compliant |
| 76,644 | |
| 5748634-1 | TE Connectivity | KIT,RCPT,15P,HDP-22,SHLD HDWRE RoHS : Compliant |
| 5,478 | ||
| 2-0644486-3 | TE Connectivity | Connectors |
| 924 | ||
| 2-644486-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 659 | ||
| 5159009486394AAKLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 432 | ||
| 748636-1 | TE Connectivity | TE COMPONENT (REF 748636-1) RoHS : Not Compliant |
| 374 | ||
| 172486-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 336 | ||
| 814863-000 | TE Connectivity | CABLE-PROT PART (TE REF 814863-000) RoHS : Compliant |
| 26 | ||
| 24863-00 | Honeywell Sensing and Control | Switch |
| 7 | ||
| 44863005 | Hartmann Electronic | AERO RELAY/CONTACTOR 44863005 |
| 2 | ||
| 074863-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 1 | ||
![]() Chip 1 Exchange | XBT48634-01 | SOLEC | INSTOCK | 1,250 | ||
| LM4863MT | INSTOCK | 369 | ||||
| 48634-01 | INSTOCK | 240 | ||||
| NTD4863NT4G | onsemi | INSTOCK RoHS : Compliant | 238 | |||
| 14.86.313 | ETTGR | INSTOCK | 2 | |||
![]() Avnet Abacus | 848633-001![]() | TE Connectivity | Heat Shrink Boot Straight 16 4064 mm Black 385 978 mm (Alt: 848633-001) RoHS : Compliant | 450 | ||
| 1974863 | Phoenix Contact | FKCS 2515ST FKCS2515ST (Alt: 1974863) RoHS : Compliant | 0 | |||
| 20848636 | nVent Schroff | Rear Panel Perforated Aluminum 84 HP Width 3 U Height (Alt: 20848636) RoHS : Compliant | 0 | |||
| 208486-3 | TE Connectivity | Conn Metal Shell CPC PIN 14 POS Crimp ST Cable Mount 14 Terminal 1 Port (Alt: 208486-3) RoHS : Compliant | 0 | |||
| 208486-3 | TE Connectivity | Conn Metal Shell CPC PIN 14 POS Crimp ST Cable Mount 14 Terminal 1 Port (Alt: 208486-3) RoHS : Compliant | 0 | |||
| 2248631000 | Molex | (Alt: 2248631000) RoHS : Compliant | 0 | |||
| 6-146486-3 | TE Connectivity | (Alt: 6-146486-3) RoHS : Compliant | 0 | |||
| 1848630000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1848630000) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 814863-000 | TE Connectivity | (Alt: 814863-000) RoHS : Compliant | 0 | |||
| 394863-E-LF | TE Connectivity | (Alt: 394863-E-LF) RoHS : Compliant | 0 | |||
| MAL210486332E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 3300 uF 400 V 20 Screw (Alt: MAL210486332E3) RoHS : Compliant | 0 | |||
| MKP1848630094Y2 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 2 Pin 30 uF 5 Through Hole 900 V (Alt: MKP1848630094Y2) RoHS : Compliant | 0 | |||
| MKP1848630914Y5 | Vishay Intertechnologies | (Alt: MKP1848630914Y5) RoHS : Compliant | 0 | |||
| MKP1848630094Y5 | Vishay Intertechnologies | Power Film Capacitor Metallized PP Radial Box 4 Pin 30 uF 5 Through Hole 900 V (Alt: MKP1848630094Y5) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2486390-1 | TE Connectivity | (Alt: 2486390-1) RoHS : Compliant | 0 | ||
| 2486390-4 | TE Connectivity | (Alt: 2486390-4) RoHS : Compliant | 0 | |||
| 2486390-7 | TE Connectivity | (Alt: 2486390-7) RoHS : Compliant | 0 | |||
| 2486390-3 | TE Connectivity | (Alt: 2486390-3) RoHS : Compliant | 0 | |||
| 2486390-2 | TE Connectivity | (Alt: 2486390-2) RoHS : Compliant | 0 | |||
| 2486390-6 | TE Connectivity | (Alt: 2486390-6) RoHS : Compliant | 0 | |||
| 2486390-5 | TE Connectivity | (Alt: 2486390-5) RoHS : Compliant | 0 | |||
| 2486390-8 | TE Connectivity | (Alt: 2486390-8) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG4AX48636V | Renesas Electronics Corporation | STQFN14 GreenPAK Linwave (Alt: SLG4AX48636V) RoHS : Compliant | 0 | ||
| FAN48632UC33X | onsemi | (Alt: FAN48632UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC50X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC50X) RoHS : Compliant | 0 | |||
| FAN48630UC33X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | LM4863LQ/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,275 | |
| LM4863MTE | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | ||
| 3448-63 | 3M | IN STOCK SHIP TODAY |
| 120 | ||
TDA4863G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 748634-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
TDA4863-2G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
![]() DB Roberts | SO4-8632-6 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 |
| 135 | |
| BSO4-8632-14 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 8248-632-SS-20 | RAF Electronic Hardware | 0 | ||||
| BSO4-8632-34 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4548-632-AL-7 | RAF Electronic Hardware | 0 | ||||
| 4548-632-S-1 | RAF Electronic Hardware | 0 | ||||
| BSO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4148-632-A-7 | RAF Electronic Hardware | 0 | ||||
| 4048-632-AL | RAF Electronic Hardware | ROUND MALE-FEMALE STANDOFF | 0 | |||
| 2148-632-SS | RAF Electronic Hardware | STAINLESS STEEL FEMALE STANDOF | 0 | |||
| SO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| SO4-8632-24 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| SO4-8632-4 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| BSO4-8632-30 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4548-632-N | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | FAN48632BUC33X | onsemi | (Alt: FAN48632BUC33X) RoHS : Compliant | 0 | ||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
| SGM4863YTQG20G/TR | SG Micro Corp | (Alt: SGM4863YTQG20G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FAN48630UC33X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | |
| FAN48630UC315X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| FAN48630UC35X | onsemi | Stock RoHS : Compliant | 9,209 | |||
| FAN48632UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
![]() Master Electronics | 610-1044-8-63 | Hirose Electric Co Ltd | Ribbon Cable Connectors Compliant with MIL-C-83503 Standard RoHS : Compliant |
| 600 | |
| 10-737486-3AS3 | Amphenol Commercial | Rectangular Plug Connector - Female Socket - 3 Position - 1 Row - Locking Ramp - Shielded - Discrete Wire - IP67 - Free Hanging (In-Line) - Orange. RoHS : Compliant |
| 100 | ||
| 208486-3 | TE Connectivity | Circular Connector Housing - Plug For Male Pins - 14 Position - Shell Size 22 - Contact Size 16 - Threaded - Coupling Nut - Cable Mount. RoHS : Compliant |
| 79 | ||
| 814863-000 | TE Connectivity | 202D932-4-0 RoHS : Compliant |
| 39 | ||
| 1974863 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 15 - pitch: 5 mm - connection method: Push-in spring connection - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 6-146486-3 | TE Connectivity | 26 MODII HDR DRST UNSHRD STKG MOQ Reduction RoHS : Compliant |
| 0 | ||
| RLL-48634000 | Carling Technologies | LTILA6M1SBLRCFN BLK/250N RoHS : Compliant |
| 0 | ||
| ZPF000000000004863 | TE Connectivity | 901-20 RT 2-7-0 SN-T MOQ Reduction RoHS : Compliant |
| 0 | ||
| 121575-4863 | ITT Interconnect Solutions | CA06PG20-27S-B-A240 RoHS : Compliant |
| 0 | ||
| 1404863 | Phoenix Contact | SAC-8P-500 0-94D RoHS : Compliant |
| 0 | ||
| 1414863 | Phoenix Contact | Power cable - 5-position - PUR halogen-free - gray RAL 7001 - shielded (Advanced Shielding Technology) - Plug angled M12 - L-coded - on free cable end - cable length: 10 m - for direct current up to 16 A/63 V RoHS : Compliant |
| 0 | ||
| 1214486-3 | TE Connectivity | COVER SHEAR DIE RoHS : Compliant |
| 0 | ||
| 1204863 | Phoenix Contact | Replacement spring - for ZAP 25 and ZAP 100 RoHS : Compliant |
| 0 | ||
| SFSDT-25-28-G-48.63-D-NUX | Samtec Inc | RoHS : Compliant |
| 0 | ||
848633-001![]() | TE Connectivity | Cable Seal - Heat Shrinkable - 19.1mm to 40.6mm - Nylon - 2-8 - Black. RoHS : Compliant |
| 0 | ||
![]() Neutron USA | AMT112S-2048-6350-S | CUI Inc | Encoders AMT10, RADIAL, CAP, SINGLE ENDED, 2048 PPR, A/B/X, 6.35 MM, STANDARD BASE RoHS : Compliant |
| 9 | |
| 1424863 | Phoenix Contact | Heavy Duty Power Connectors HC-STA-B48-BWS- EMC-AL RoHS : Compliant |
| 6 | ||
| AXG94863 | Axiom Manufacturing | AXIOM MPO-MPO OM3 F/M FIBER CABLE 1M |
| 0 | ||
| 3048632 | Phoenix Contact | Fuse Modular Terminal Block, Screw, DIN Rail, 1row 2conn, 32A, UK 10,3-CC HESILED N 690 3POL RoHS : Compliant |
| 0 | ||
| 09486363757020 | HARTING Technology Group | Ethernet Cables / Networking Cables RJ Industrial RJ45 Cat6a Patch Cable, 4x2xAWG26/7, PVC yellow, 2.0m RoHS : Compliant |
| 0 | ||
| AMT112S-2048-6350-S | Same Sky | Encoders AMT10, RADIAL, CAP, SINGLE ENDED, 2048 PPR, A/B/X, 6.35 MM, STANDARD BASE RoHS : Compliant |
| 0 | ||
| 09486363757010 | HARTING Technology Group | Ethernet Cables / Networking Cables RJ Industrial RJ45 Cat6a Patch Cable, 4x2xAWG26/7, PVC yellow, 1.0m RoHS : Compliant |
| 0 | ||
| 09486363757005 | HARTING Technology Group | Ethernet Cables / Networking Cables RJ Industrial RJ45 Cat6a Patch Cable, 4x2xAWG26/7, PVC yellow, 0.5m RoHS : Compliant |
| 0 | ||
| AMT113S-2048-6350-S | CUI Inc | Encoders AMT10, AXIAL, CAP, SINGLE ENDED, 2048 PPR, A/B/X, 6.35 MM, STANDARD BASE RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9486-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. SHV Plug to SHV Plug Cable 36 Inch Length Using 75 Ohm RG11 Coax., Radio frequency assembly SHV plug to SHV plug cable 36 inch length using 75 Ohm RG11 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to SHV plug cable 36 inch length using 75 Ohm RG11 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a plug gender on end 1 and plug on end 2. PE3C9486-36 can also be known as a SHV male to SHV male cable assembly and will be shipped same-day as it is purchased. SHV male to SHV male cable assembly PE3C9486-36 is built with RG11 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV plug to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV male to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to SHV plug cable 36 inch length using 75 Ohm RG11 coax. |
| 7 | |
| PE7486-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7486-3 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 3 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE3C4863-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-36, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-36 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE34863LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3FCA486-3M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC APC to LC UPC, SM OS2, 2.0mm LSZH, Yellow-3M. Pasternack’s PE3FCA486-3M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 3-meter long simplex cable assembly is equipped with LC/APC to LC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA486-3M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA486-3M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex LC/APC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE34863/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Mini UHF Male to Mini UHF Female Cable Using RG58 Coax with HeatShrink. PE34863/HS is a Mini UHF male to Mini UHF female cable using RG58 coax. This Pasternack Mini UHF male to Mini UHF female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male Mini UHF to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34863/HS Mini UHF male to Mini UHF female cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W14863 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax. PE3W14863 is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863 N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W04863/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using PE-SR402AL Coax with HeatShrink. PE3W04863/HS is a TNC male to SMA male cable using PE-SR402AL coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04863/HS TNC male to SMA male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE34863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Mini UHF Female to Mini UHF Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE34863LF/HS is a Mini UHF female to Mini UHF male cable using RG58 coax. This Pasternack Mini UHF female to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our female Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34863LF/HS Mini UHF female to Mini UHF male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W24863 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Female to BNC Female Bulkhead Cable Using RG188-DS Coax. PE3W24863 is a SMA female to BNC female bulkhead cable using RG188-DS coax. This Pasternack SMA female to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24863 SMA female to BNC female bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE4863 | Pasternack Enterprises | Key Specifications, Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: Bulkhead, Interface Type 1: RG178, Interface Type 2: RG196. RP-SMA Female Bulkhead Mount Connector Solder Attachment for RG178, RG196, .235 inch D Hole. PE4863 reverse polarity SMA female bulkhead coaxial connector has an interface type of RG178, RG196 and a 50 Ohm impedance. Pasternack reverse polarity SMA female bulkhead connector uses shield/contact solder/solder as an attachment method. The Pasternack SMA coaxial connector has a brass body with nickel plating. This reverse polarity SMA female bulkhead coaxial RF connector is REACH compliant. This Pasternack reverse polarity female SMA bulkhead connector will ship the same day as purchased. Our bulkhead SMA reverse polarity female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 0 | ||
| PE3C4863 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax. | 0 | |||
| PE3C4863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W14863/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax with HeatShrink. PE3W14863/HS is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863/HS N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE34486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMC Plug Right Angle to SMC Jack Bulkhead Cable 36 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMC cable connection on one end and SMC bulkhead cable connection on the other. Our right angle SMC to SMC cable assemblies have a plug gender on end 1 and jack on end 2. This SMC to SMC cable is a plug to jack coax assembly, PE34486-36, can also be known as a right angle SMC male to SMC female cable assembly and will be shipped same-day as it is purchased. SMC male to SMC female cable assembly PE34486-36 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with right angle SMC to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC right angle plug to SMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34486-36 can also be used in the other direction and will be SMC jack bulkhead to right angle SMC plug cable assembly if the opposite connectivity is required. SMC right angle male to SMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug right angle to SMC jack bulkhead cable 36 inch length using PE-B100 coax. |
| 0 | ||
![]() Vyrian | TDA4863 | NXP Semiconductors | Power Factor Controller, PDIP8 | 12,672 | ||
TDA4863-2![]() | Infineon Technologies AG | Power Factor Controller, BIPolar, PDIP8 RoHS : Compliant | 12,283 | |||
| NTD4863NA-1G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,760 | |||
| NTD4863N-1G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 10,302 | |||
| NTD4863NT4G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 9,745 | |||
| TMC5748639DTR | Texas Instruments | 9,162 | ||||
TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Controller, PDSO8 RoHS : Compliant | 8,449 | |||
LM4863MDC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 6,822 | |||
| NTD4863NAT4G | onsemi | Power Field-Effect Transistor, 9.2A I(D), 25V, 0.014ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 5,942 | |||
| LM4863MT | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO20 | 5,795 | |||
| XOPA4863IPWR | Texas Instruments | Operational Amplifier, 4 Func, 1300uV Offset-Max, 110MHz Band Width, PDSO14 RoHS : Not Compliant | 5,571 | |||
TDA4863XKLA1![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant | 5,339 | |||
| LM4863M | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO16 | 4,501 | |||
LM4863LQ![]() | Texas Instruments | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func RoHS : Not Compliant | 4,118 | |||
TDA48632GXUMA2![]() | Infineon Technologies AG | Power Factor Controller RoHS : Compliant | 452 | |||
![]() Waytek, Inc. | 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 18,500 | |
![]() Win Source Electronics | TDA4863-2G![]() | Infineon Technologies AG | Power Factor Controller IC for High Power Factor and Low THD RoHS : Compliant |
| 20,000 | |
| FAN48630BUC31JX | onsemi | IC REG BOOST PROG 1.5A 16WLCSP RoHS : Compliant |
| 15,315 | ||
TDA4863G![]() | Infineon Technologies AG | TDA4863 - PFC-DCM (DISCONTINUOUS RoHS : Compliant |
| 5,772 | ||
TDA4863GXUMA2![]() | Infineon Technologies AG | IC PFC CONTROLLER DCM 8DSO RoHS : Compliant |
| 5,260 | ||
| LN4863M | National Semiconductor Corporation |
| 1,200 | |||
| LN4863MTE | National Semiconductor Corporation |
| 700 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |