| Os motores de busca de Datasheet de Componentes eletrônicos |
|
4343-R2 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Avnet Americas | CYW43439KUBGT | Infineon Technologies AG | Multiprotocol Module, Bluetooth 5.0 LE/5.2 EDR/5.4, IEEE 802.11b/g/n, 2.4GHz to 2.5GHz - Tape and Reel (Alt: CYW43439KUBGT) RoHS : Compliant |
| 5,000 | |
| PA4343.272NLT | Pulse Electronics Corporation | Power Inductor (SMD), 2.7 uH, ? 20%, 20 A, Shielded, 32 A, 14mm x 12.8mm x 6.5mm - Tape and Reel (Alt: PA4343.272NLT) RoHS : Compliant |
| 2,500 | ||
| CY8CPROTO-062S3-4343W | Infineon Technologies AG | 150-MHz Arm Cortex-M4 Dual-Core Wi-Fi BT Prototyping Kit - Bulk (Alt: CY8CPROTO-062S3-4343W) RoHS : Compliant |
| 18 | ||
| 45984-4343 | Molex | PCB Receptacle, 28 Contacts, 2 Rows, Gold, 30A, THT, Right Angle, Copper Alloy, Board-to-Board - Trays (Alt: 0459844343) RoHS : Compliant |
| 15 | ||
| CYW9P62S1-43438EVB-01 | Infineon Technologies AG | PSOC 62S1 Wi-Fi BT Pioneer Kit - Bulk (Alt: CYW9P62S1-43438EVB-01) RoHS : Not Compliant | 15 | |||
| R434312409 | Radiall | DIV 2W SMA 2-4GHZ - Bulk (Alt: R434312409) RoHS : Not Compliant |
| 0 | ||
| 39543-4321 | Molex | - Bulk (Alt: 0395434321) RoHS : Compliant |
| 0 | ||
| S41X043434JP | CTS Corporation | Fixed Network Resistor, 430 kohm, Isolated, 2 Resistors, 0402 [1005 Metric], Convex, ? 5%, 50 V - Tape and Reel (Alt: S41X043434JP) RoHS : Compliant |
| 0 | ||
| 322A434-3-0-CS5665 | TE Connectivity | - Bulk (Alt: 333211-000) RoHS : Compliant | 0 | |||
| BFC237543431 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 430 pF, ? 3.5%, Through Hole, 600 V, 2 kV - Tape and Reel (Alt: BFC237543431) RoHS : Compliant |
| 0 | ||
| 6134-343-2590 | TE Connectivity | - Bag (Alt: 6134-343-2590) RoHS : Compliant |
| 0 | ||
| 39543-4302 | Molex | - Bulk (Alt: 0395434302) RoHS : Compliant |
| 0 | ||
| ISM43439-WB-L151 | Inventek Systems LLC | WIFI/BT RADIO SIP - Tape and Reel (Alt: ISM43439-WB-L151) RoHS : Compliant |
| 0 | ||
| S41X043433JP | CTS Corporation | Fixed Network Resistor, 43 kohm, Isolated, 2 Resistors, 0402 [1005 Metric], Convex, ? 5%, 50 V - Tape and Reel (Alt: S41X043433JP) RoHS : Compliant |
| 0 | ||
| PA4343.473ANLT | Pulse Electronics Corporation | Inductor Molded Power/Shielded 47uH 20% 100KHz 8A T/R - Tape and Reel (Alt: PA4343.473ANLT) RoHS : Compliant |
| 0 | ||
![]() Newark | PM4343.473NLT | Pulse Electronics Corporation | POWER INDUCTOR, 47UH, SHIELDED, 9.5A; IN RoHS : Compliant |
| 1,798 | |
| PM4343.473NLT | Pulse Electronics Corporation | POWER INDUCTOR, 47UH, SHIELDED, 9.5A; IN RoHS : Compliant |
| 1,798 | ||
| PA4343.152NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 1.5UH, 27A; RoHS : Compliant |
| 446 | ||
| PA4343.152NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 1.5UH, 27A; RoHS : Compliant |
| 446 | ||
| 74434301008100 | Wurth Elektronik | INDUCTOR, 10UH, SHIELDED, 3.2A; RoHS : Compliant |
| 445 | ||
| 74434301008100 | Wurth Elektronik | INDUCTOR, 10UH, SHIELDED, 3.2A; RoHS : Compliant |
| 445 | ||
| PA4343.182NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 1.8UH, 27A; RoHS : Compliant |
| 163 | ||
| PA4343.182NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 1.8UH, 27A; RoHS : Compliant |
| 163 | ||
| PA4343.361NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 360NH, 45A; RoHS : Compliant |
| 100 | ||
| PA4343.361NLT | Pulse Electronics Corporation | INDUCTOR, SHIELDED, AEC-Q200, 360NH, 45A; RoHS : Compliant |
| 100 | ||
| 1943438 | Phoenix Contact | TERMINAL BLOCK, R/A, SOCKET, 3WAY, TH; RoHS : Compliant |
| 41 | ||
| CY8CPROTO-062S3-4343W | Infineon Technologies AG | PROTOTYPING KIT, ARM, BLUETOOTH AND WIFI; RoHS : Compliant |
| 10 | ||
| 74434301008220 | Wurth Elektronik | INDUCTOR, 22UH, SHIELDED, 2A; RoHS : Compliant |
| 8 | ||
| 74434301008220 | Wurth Elektronik | INDUCTOR, 22UH, SHIELDED, 2A; RoHS : Compliant |
| 8 | ||
| T4343M 10 | CK tools | SPANNER, COMBINATION, 10MM; RoHS : Not Compliant |
| 6 | ||
![]() RS | S1A-434313SW | New Age Enclosures | SQUARE UTILITY WITH WALL MOUNT, WHITE |
| 26 | |
| S1A-434313S | New Age Enclosures | SQUARE UTILITY, WHITE |
| 25 | ||
| Q40SP6FF600Q (34343) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, FIXED FIELD, 600MM, 10-30VDC, PNP, QD, Q40 |
| 11 | ||
| 2084343 | RS Pro | FEMALE HEAVY DUTY POWER CONNECTOR INSERT 7 POSITION 10A 250V CRIMP |
| 6 | ||
| 45984-4343 | Molex | LPH RCPT ASSY RTAN 04 PWR 24 SIG SHORT RoHS : Compliant |
| 4 | ||
| 1954343 | RS Pro | AV ADAPTER MALE HDMI TO FEMALE DISPLAYPORT 150MM CABLE + AUDIO +POWER |
| 2 | ||
| A70QS100-4 (G214343) | Mersen Electrical Power | FUSE, HIGH SPEED, FORM 101, BOLT-IN, A70QS SERIES, 700VAC/DC, 100A |
| 2 | ||
| 2943437 (EMG 12-TR/INV) | Phoenix Contact | INVERTER MODULE EMG SERIES |
| 2 | ||
| IEGHF66-1REC4-34391-50-UV | Sensata Technologies | CIRCUIT BREAKER HYDMAG 2 PL 250VAC 50A AUX SW |
| 2 | ||
| BCC0EP7 (BCC M415-0000-1A-003-PX0434-300) | Balluff Inc | CONNECTOR/CABLE, FEMALE M12, PUR, 30.00 M |
| 2 | ||
| 4343 | 80/20 Inc | COUNTERSINK "L" PIVOT ARM |
| 0 | ||
| 4343 | Adafruit Industries | ADAFRUIT MONSTER M4SK - DIY ELECTRONIC EYES MASK |
| 0 | ||
| 4343 | Visual Communications Company | PANEL MOUNT LENS FOR T1 LED AMBER RoHS : Compliant |
| 0 | ||
| 4343 | Keystone Electronics Corp | NUT, BLIND CAPTIVE, PRESS-FIT, THREADED, 8-32, MOLDED NYLON, BRASS INSERT, .500 |
| 0 | ||
| 4343 | Greenlee Textron Inc | SEAL KIT REPAIR FOR 767 HYDRAULIC HAND PUMP, SERIAL CODE ABM,11 PIECES |
| 0 | ||
![]() Microchip Technology Inc | AC164343 | Microchip Technology Inc | MPLAB PM3 Socket Module for 64L QFN (9x9mm body size), Projected EOL: |
| 9 | |
![]() Bisco Industries | M43436/1-3 | MIL-SPEC Miscellaneous | 9,101 | |||
| 4343 | Keystone Electronics Corp | 2,003 | ||||
| M43436/1-1 STAMPED TL699 | MIL-SPEC Miscellaneous | 450 | ||||
| M43436/4-1 | MIL-SPEC Miscellaneous | 290 | ||||
| 13-434-3-01 | Staffall | 91 | ||||
| 24343 | Keystone Electronics Corp | 65 | ||||
| M43436/2-1 STAMPED "6C" | MIL-SPEC Miscellaneous | 48 | ||||
| M43436/5-1 | MIL-SPEC Miscellaneous | 44 | ||||
| M43436/3-1 | MIL-SPEC Miscellaneous | 20 | ||||
| CA #AN2434-3 | Adam Technologies Inc | 11 | ||||
| M43436/1-3 CUST0M | MIL-SPEC Miscellaneous | 6 | ||||
| M43436/2-1 STAMPED "14V" | MIL-SPEC Miscellaneous | 4 | ||||
| M43436/2-1 STAMPED "A" | MIL-SPEC Miscellaneous | 4 | ||||
| M43436/2-1 STAMPED "D" | MIL-SPEC Miscellaneous | 4 | ||||
| 050-643-4313310 | ITT Interconnect Solutions | 3 | ||||
![]() Onlinecomponents.com | 77-3434-3429-33004-0100 | Franz Binder GmbH & Co | FA12 MS12 TPE YELLOW RoHS : Compliant |
| 100 | |
| 77-3434-3429-20004-0100 | Franz Binder GmbH & Co | M12-A Connecting cable male cable connector - female angled connector Contacts: 4 unshielded moulded on the cable IP68/IP69K UL PVC grey 4 x 0.34mm² 1 m RoHS : Compliant |
| 16 | ||
| 4343 | Visual Communications Company | Panel Mount Lens FOR T1 LED Amber | VCC (Visual Communications Company) 4343 RoHS : Compliant |
| 0 | ||
| 4343 | Heyco | CH L-27-P NATURAL RoHS : Compliant |
| 0 | ||
| 132043-4343 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 7 Pin 5 A PLB Series | ITT Cannon PLB4G620J07 RoHS : Compliant |
| 0 | ||
| 77-3434-3429-50008-0200 | Franz Binder GmbH & Co | FA12 MS12 PURHF RoHS : Compliant |
| 0 | ||
| R434312409 | Radiall | DIV 2W SMA 2-4GHZ RoHS : Compliant |
| 0 | ||
| 3-2343-430A | Eaton Cutler-Hammer | RoHS : Compliant |
| 0 | ||
| 307-043-431-108 | EDAC Inc | Card Edge Connector - 43 Contacts - 0.156” (3.96mm) Pitch - Single Row - 0.062” (1.57mm) Thick PCB - Board Mount RoHS : Compliant |
| 0 | ||
| 39543-4321 | Molex | 5.0MM EUROBLOCK PC 45 BLK 21CKT RoHS : Compliant |
| 0 | ||
| 132043-4314 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 14 Pin 2 A PLB Series | ITT Cannon PLB4G820H14 RoHS : Compliant |
| 0 | ||
| 132043-4396 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 3 Pin 10 A PLB Series | ITT Cannon PLB4G420C03 RoHS : Compliant |
| 0 | ||
| 143435 | Brady Worldwide Inc | (SOC) SPC318 SOC SKIMMER RoHS : Compliant |
| 0 | ||
| 63434-36 | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 307-043-431-107 | EDAC Inc | Card Edge Connector - 43 Contacts - 0.156” (3.96mm) Pitch - Single Row - 0.062” (1.57mm) Thick PCB - Board Mount RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | IP4343CX5/LF,135 | NXP Semiconductors | Data Line Filter RoHS : Compliant |
| 4,500 | |
| IP4343CX5/P,135 | NXP Semiconductors | Data Line Filter RoHS : Compliant |
| 211,500 | ||
| CYW4343WKWBGT | Infineon Technologies AG | CYW4343WKWBGT - WICED Wi-Fi/Bluetooth Combos RoHS : Compliant |
| 2,373 | ||
| CYW43438LKUBGT | Infineon Technologies AG | CYW43438 - Single-Chip IEEE 802.11 b/g/n MAC/Baseband/Radio RoHS : Compliant |
| 11,147 | ||
| CYW4343WKUBGT | Infineon Technologies AG | RF Transceiver (Board Mount) TxRx + MCU Bluetooth, WiFi, FM 74-BGA T/R RoHS : Compliant |
| 3,478 | ||
| CY7C64343-32LQXC | Infineon Technologies AG | USB Bus Controller, CMOS RoHS : Compliant |
| 2,150 | ||
OPA4343UA/2K5![]() | Texas Instruments | Op Amp Standard 5.5MHz 14-SOIC T/R RoHS : Compliant |
| 2,570 | ||
OPA4343EA/2K5![]() | Texas Instruments | Op Amp Standard 5.5MHz 16-SOP T/R RoHS : Compliant |
| 2,000 | ||
| ATOPA4343NA/2K5 | Texas Instruments | OP AMP, QUAD RAIL-TO-RAIL RoHS : Compliant |
| 7,500 | ||
| OPA4343EA | Burr-Brown Corp | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Not Compliant |
| 189 | ||
| OPA4343EA/250G4 | Burr-Brown Corp | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO16 RoHS : Compliant |
| 230 | ||
| OPA4343EA/2K5 | Burr-Brown Corp | Op Amp Standard 5.5MHz 16-SOP T/R RoHS : Compliant |
| 4,015 | ||
| OPA4343UA/2K5 | Burr-Brown Corp | Op Amp Standard 5.5MHz 14-SOIC T/R RoHS : Compliant |
| 3,873 | ||
CY7C64343-32LQXC![]() | Cypress Semiconductor | USB Bus Controller, CMOS RoHS : Compliant |
| 14 | ||
| CY7C64343-32LQXCKG | Cypress Semiconductor | Specific Microcontroller M8C USB Microcontroller RoHS : Compliant |
| 466 | ||
![]() Sager | 0395434304 | Molex | Fixed Terminal Blocks 5MM EURO HDR 04P FIXED RoHS : Compliant |
| 3,310 | |
| 4343 | Keystone Electronics Corp | Screws & Fasteners BLIND CAPTIVE NUT |
| 0 | ||
| 4343 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RFLS-47-0.250-PSA | 0 | |||
| CB4-X0-22-434-321-L | Carling Technologies | Circuit Breakers | 0 | |||
| 5144343 | Phoenix Contact | DIN Rail Terminal Blocks CMS-S-FB/H110-PSS | 0 | |||
| 0434301019 | Molex | Molex | 0 | |||
| 0434301307 | Molex | Molex | 0 | |||
| 0434341006 | Molex | Molex | 0 | |||
| 0434351302 | Molex | Molex | 0 | |||
| 117-43-430-41-005000 | Mill-Max Mfg Corp | IC & Component Sockets 30 PIN SOLDER TAIL RoHS : Compliant | 0 | |||
| 0011184343 | Molex | Punches & Dies 60722A103 INSULATION PUNCH RoHS : Compliant |
| 0 | ||
| 0434351401 | Molex | Molex | 0 | |||
| 11543436 | TE Connectivity | TE Connectivity | 0 | |||
| 322A434-3-0-CS5665 | TE Connectivity | TE Connectivity 322A434-3-0-CS5665 | 0 | |||
| 6134-343-2590 | TE Connectivity | Circular MIL Spec Tools, Hardware & Accessories R CPLG ASSY |
| 0 | ||
![]() Coilcraft Direct | Q4343-BL | Coilcraft Inc | Transformer, for NSC LM258x, RoHS RoHS : Compliant |
| 12 | |
![]() TME | 194343 | TE Connectivity | Connector: D-Sub; PIN: 15; plug; straight; soldering |
| 34 | |
| 1434-30 | Hammond Manufacturing | Mounting plate; steel; 1444; natural |
| 5 | ||
| 4-343-VDE-VE10 | Bernstein AG | Screwdriver: voltage tester; insulated; slot; 3x0.7mm; 10pcs. |
| 4 | ||
| 10054343 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 8; THR,THT; 3A; 250V |
| 0 | ||
| 77 3434 3429 20004-1000 | Binder UK Ltd | Cable: for sensors; PIN: 4; M12 male straight,M12 female angled |
| 0 | ||
| 77 3434 3429 20712-0500 | Binder UK Ltd | Cable: for sensors; PIN: 12; M12 male straight,M12 female angled |
| 0 | ||
| 77 3434 3429 50708-0200 | Binder UK Ltd | Cable: for sensors; PIN: 8; M12 male straight,M12 female angled |
| 0 | ||
| 77 3434 3429 50712-0200 | Binder UK Ltd | Cable: for sensors; PIN: 12; M12 male straight,M12 female angled |
| 0 | ||
| 1643430000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 11A; 320V RoHS : Compliant |
| 0 | ||
| 77 3434 3405 20003-0500 | Binder UK Ltd | Cable: for sensors; PIN: 3; M12 female angled,M8 male straight |
| 0 | ||
| 77 3434 3405 50003-0200 | Binder UK Ltd | Cable: for sensors; PIN: 3; M12 female angled,M8 male straight |
| 0 | ||
| 77 3434 3427 50004-0200 | Binder UK Ltd | Cable: for sensors; PIN: 4; 2m; PUR; automatics |
| 0 | ||
| 79 3434 36 04 | Binder UK Ltd | Connector: M12 |
| 0 | ||
| 12243434 | WIKA Instrument LP | Manometer; 0÷250bar; Class: 1.6; 100mm; Temp: -40÷60°C; IP54; steel |
| 0 | ||
| 77 3434 3405 50004-0500 | Binder UK Ltd | Cable: for sensors; PIN: 4; M12 female angled,M8 male straight |
| 0 | ||
![]() Ameya Holding Limited | OPA4343UA/2K5![]() | Texas Instruments | IC OPAMP GP 5.5MHZ RRO 14SOIC RoHS : Compliant | 15,517 | ||
OPA4343EA/2K5![]() | Texas Instruments | IC OPAMP GP 5.5MHZ RRO 16SSOP RoHS : Compliant | 10,677 | |||
OPA4343NA/2K5![]() | Texas Instruments | IC OPAMP GP 5.5MHZ RRO 14TSSOP RoHS : Compliant | 10,471 | |||
![]() ComSIT USA | 4,34331E+11 | Adolf Wuerth Gmbh & Co Kg | WS-TASU SMT TACT SWITCH Keypad Switch, 1 Switches, SPST, Momentary-tactile, 0.05A, 12VDC, 2.94N, Solder Terminal, Surface Mount-right Angle RoHS : Compliant | 3,400 | ||
| PA4343102ANLT | Pulse Electronics Corporation | Inductor, Pulse, SMD, 10uH, 20% tolerance, 1.5A current rating RoHS : Compliant | 490 | |||
![]() Interstate Connecting Components | 4343 | Keystone Electronics Corp |
| 23 | ||
| 440AS031NF1434-3B | Glenair Inc | EMI/RFI ADAPTER BANDING & SHRINK BOOT | 9 | |||
| 6134-343-2590 | TE Connectivity | R CPLG ASSY | 0 | |||
| 3-644343-2 | TE Connectivity | 02P MTA100 CONN ASSY ON TAPE RoHS : Compliant |
| 0 | ||
| 2434398-1 | TE Connectivity | COVER SHEET METAL CENTER S2 | 0 | |||
| 440AS030N1434-3-B | Glenair Inc | 0 | ||||
| 440AS063N2434-3 | Glenair Inc | 0 | ||||
| 440DS031B1434-3B | Glenair Inc | 0 | ||||
| 6134-343-25149 | TE Connectivity | R CPLG ASSY | 0 | |||
| 2143432-1 | TE Connectivity | QSFP CAGE ASSY W/ LIGHT PIPE, RoHS : Compliant |
| 0 | ||
| 6134-343-23149 | TE Connectivity | R CPLG ASSY | 0 | |||
| 440AS030N1434-3 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 440FS069M1434-3 | Glenair Inc | 0 | ||||
| 06243433 | TE Connectivity | 06243433 RoHS : Compliant | 0 | |||
| 3043434011 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCNTFR-7/8-0SPCS7029 | 0 | |||
![]() NexGen Digital | OPA4343NA/2K5![]() | Texas Instruments | RoHS : Compliant | 500 | ||
![]() PEI Genesis | 10-497643-435 | Amphenol Corporation |
| 2,090 | ||
| 434349009 | Ulti-Mate Connector Inc |
| 0 | |||
| 041-0434-300 | Dialight |
| 0 | |||
| 31-0434-300 | Dialight |
| 0 | |||
| 159C4343P018 REV 13 | ITT Interconnect Solutions |
| 0 | |||
| CM44343-3S | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| J1654S09H04-34-3 | SOURIAU-SUNBANK |
| 0 | |||
| M24308/4-343 | Amphenol PCD |
| 0 | |||
| M24308/4-343 | Amphenol Positronic |
| 0 | |||
| M24308/24-343 | Amphenol Positronic |
| 0 | |||
| M2000/4-343 | Amphenol PCD |
| 0 | |||
| J1564S09H04-34-3 | SOURIAU-SUNBANK |
| 0 | |||
| MDM97294-3439 | ITT Interconnect Solutions |
| 0 | |||
| G350243-43 | SOURIAU-SUNBANK |
| 0 | |||
| 51-0434-300 | Dialight |
| 0 | |||
![]() Powell Electronics | 3-644343-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 26,862 | |
| 2-204343-0 | TE Connectivity | Connectors |
| 26,400 | ||
| 043437-000 | TE Connectivity | Wire & Cable RoHS : Compliant |
| 5,118 | ||
| 2350434-3 | TE Connectivity | TE COMPONENT (REF 2350434-3) RoHS : Compliant |
| 1,426 | ||
| 1218434-3 | TE Connectivity | R/A RCP ASSY 25 POS SER 109 RoHS : Not Compliant |
| 597 | ||
| 6643432-1 | TE Connectivity | Power Connectors RoHS : Compliant |
| 469 | ||
| 2143432-1 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 317 | ||
| 643430-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 218 | ||
| 31-4343 | Amphenol RF | RF Connector |
| 100 | ||
3043434002![]() | TE Connectivity | Connectors RoHS : Compliant |
| 66 | ||
| 054343-000 | TE Connectivity | connector accessories |
| 40 | ||
| 322A434-3-0 | TE Connectivity | Connectors RoHS : Compliant |
| 17 | ||
| 43430001 | Hartmann Electronic | AERO RELAY/CONTACTOR 43430001 |
| 4 | ||
| 043433-000 | TE Connectivity | connector accessories RoHS : Compliant |
| 3 | ||
| 43433001 | Hartmann Electronic | AERO RELAY/CONTACTOR 43433001 |
| 3 | ||
![]() PUI | 12.94343 | 1,310 | ||||
![]() Richardson RFPD | B39262B4343P810 | RF360 Holdings Singapore Pte Ltd | SAW Filter RF 2595MHz 2.4dB 50Ohm SMD 5 Pin QCS5P RoHS : Compliant |
| 0 | |
| 284-3-43 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 24-3-43-LIM | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| SI5395A-A14343-GM | Skyworks Solutions Inc | SI5395A-A14343-GM RoHS : Compliant | 0 | |||
| R594343417 | Radiall | RF Switch SPnT 0MHz to 6GHz 100dB RoHS : Not Compliant |
| 0 | ||
| R300124343W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp RA Panel Mount RoHS : Compliant |
| 0 | ||
| 24-3-43 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| SI5395A-A14343-GMR | Skyworks Solutions Inc | 12-Channel Jitter Attenuator/Clock Multiplier with RoHS : Compliant | 0 | |||
| SI5338C-B04343-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| R434312001 | Radiall | POWER DIVIDER 2W SMA 2-4.2GHZ RoHS : Compliant |
| 0 | ||
| AC164343 | Microchip Technology Inc | dsPIC33F Microcontroller Socket Board RoHS : Compliant |
| 0 | ||
| 935387643431 | NXP Semiconductors | CAN 5Mbps Normal/Silent 5V 8-Pin HVSON EP T/R Auto RoHS : Compliant | 0 | |||
| R594343617 | Radiall | SP6z P S6 LS 24 C+ He RoHS : Not Compliant |
| 0 | ||
| R143430000 | Radiall | SQUARE FLANGE JACK RECEPTACLE RoHS : Compliant |
| 0 | ||
| TDK4343402DH | Powerex Power Semiconductors | PHASE CNTL THYRISTOR RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 3-644343-2 | TE Connectivity | INSTOCK RoHS : Compliant | 76,960 | ||
| 2-204343-0 | TE Connectivity | INSTOCK | 52,000 | |||
| PM4343.223NLT | YAGEO Corporation | INSTOCK RoHS : Compliant | 36,400 | |||
| 8043433030- | Lelon Electronics Corp | INSTOCK | 12,000 | |||
| 45985-4343 | Molex | INSTOCK RoHS : Compliant | 5,101 | |||
| 12.94343 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 1,310 | |||
| ICS-43432 | INVEN | INSTOCK | 987 | |||
| 1834343 | INSTOCK | 974 | ||||
| 15434314 | INSTOCK | 2 | ||||
| PTL-43-439-RD | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1834343 | Phoenix Contact | KGGMC 15 2 KGGMC152 (Alt: 1834343) RoHS : Compliant | 20 | ||
| 1434395 | Phoenix Contact | PTSA 15 435Z MCRDGY PTSA15435ZMCRDGY (Alt: 1434395) RoHS : Compliant | 0 | |||
| 5434311 | Phoenix Contact | BCH508VS 2 GY BCH508VS2GY (Alt: 5434311) RoHS : Compliant | 0 | |||
| 395434306 | Molex | (Alt: 395434306) RoHS : Compliant | 0 | |||
| 3-644343-2 | TE Connectivity | Conn Wire to Board RCP 2 POS 254mm IDT ST Cable Mount Tape (Alt: 3-644343-2) RoHS : Compliant | 0 | |||
3043434002![]() | TE Connectivity | (Alt: 3043434002) RoHS : Compliant | 0 | |||
| S41X043434JP | CTS Corporation | Fixed Network Resistor 430 kohm Isolated 2 Resistors 0402 1005 Metric Convex 5 50 V - Tape and Reel (Alt: S41X043434JP) RoHS : Compliant | 0 | |||
| S41X043433JP | CTS Corporation | Fixed Network Resistor 43 kohm Isolated 2 Resistors 0402 1005 Metric Convex 5 50 V - Tape and Reel (Alt: S41X043433JP) RoHS : Compliant | 0 | |||
| S41X043430JP | CTS Corporation | Fixed Network Resistor 43 ohm Isolated 2 Resistors 0402 1005 Metric Convex 5 50 V 63 mW - Tape and Reel (Alt: S41X043430JP) RoHS : Compliant | 0 | |||
| PM4343.103NLT | Pulse Electronics Corporation | Inductor Molded PowerShielded 10uH 20 100KHz 10A TR - Tape and Reel (Alt: PM4343.103NLT) RoHS : Compliant | 0 | |||
| PM4343.473NLT | Pulse Electronics Corporation | Inductor Molded PowerShielded 47uH 20 100KHz 65A TR - Tape and Reel (Alt: PM4343.473NLT) RoHS : Compliant | 0 | |||
| PA4343.182NLT | Pulse Electronics Corporation | Power Inductor SMD 18 uH 20 27 A Shielded 40 A 14mm x 128mm x 65mm - Tape and Reel (Alt: PA4343.182NLT) RoHS : Compliant | 0 | |||
| 541043431TR375 | Molex | (Alt: 541043431TR375) RoHS : Compliant | 0 | |||
| PA4343.103ANLT | Pulse Electronics Corporation | Power Inductor SMD 10 uH 20 11 A Shielded 15 A 135mm x 126mm x 62mm - Tape and Reel (Alt: PA4343.103ANLT) RoHS : Compliant | 0 | |||
| BRACKETB00043433 | Vishay Intertechnologies | VISBRACKETB00043433 (Alt: BRACKETB00043433) RoHS : Compliant | 0 | |||
![]() Avnet Asia | PA4343.223ANLT | Pulse Electronics Corporation | Power Inductor (SMD), 22 uH, ? 20%, 8 A, Shielded, 9 A, 13.5mm x 12.6mm x 6.2mm (Alt: PA4343.223ANLT) RoHS : Compliant | 5,000 | ||
| PA4343.301NLT | Pulse Electronics Corporation | (Alt: PA4343.301NLT) RoHS : Compliant |
| 2,000 | ||
| PA4343.222NLT | Pulse Electronics Corporation | (Alt: PA4343.222NLT) RoHS : Compliant |
| 1,000 | ||
| PA4343.822ANLT | Pulse Electronics Corporation | (Alt: PA4343.822ANLT) RoHS : Compliant | 0 | |||
| PM4343.473NLT | Pulse Electronics Corporation | Inductor Molded Power/Shielded 47uH 20% 100KHz 6.5A T/R (Alt: PM4343.473NLT) RoHS : Compliant | 0 | |||
| PA4343.472NLT | Pulse Electronics Corporation | Power Inductor (SMD), 4.7 uH, ? 20%, 13.5 A, Shielded, 28 A, 14mm x 12.8mm x 6.5mm (Alt: PA4343.472NLT) RoHS : Compliant | 0 | |||
| PA4343.152NLT | Pulse Electronics Corporation | Power Inductor (SMD), 1.5 uH, ? 20%, 27 A, Shielded, 45 A, 14mm x 12.8mm x 6.5mm (Alt: PA4343.152NLT) RoHS : Compliant | 0 | |||
| SLG4L43432V | Renesas Electronics Corporation | GPAK MIXED SIGNAL MATRIX,ASKEY (Alt: SLG4L43432V) RoHS : Compliant | 0 | |||
| PA4343.223NLT | Pulse Electronics Corporation | Power Inductor (SMD), 22 uH, ? 20%, 9 A, Shielded, 12 A, 14mm x 12.8mm x 6.5mm (Alt: PA4343.223NLT) RoHS : Compliant | 0 | |||
| 374343-E | TE Connectivity | (Alt: 374343-E) RoHS : Compliant | 0 | |||
| PM4343.223NLT | Pulse Electronics Corporation | Inductor Molded Power/Shielded 22uH 20% 100KHz 9A T/R (Alt: PM4343.223NLT) RoHS : Compliant | 0 | |||
| PA4343.103NLT | Pulse Electronics Corporation | Ind Power Shielded/Molded 10uH 20% 100kHz 10A (14 X 12.8 X 6.5mm) T/R (Alt: PA4343.103NLT) RoHS : Compliant | 0 | |||
| SLG4A43433V | Renesas Electronics Corporation | GPAK MIXED SIGNAL MATRIX (Alt: SLG4A43433V) RoHS : Compliant | 0 | |||
| PA4343.501NLT | Pulse Electronics Corporation | (Alt: PA4343.501NLT) RoHS : Compliant | 0 | |||
| ICS-43434 | TDK Invensense | Mic Omni-Directional -26dB 3.63V Rectangular Solder Pad T/R (Alt: ICS-43434) RoHS : Not Compliant | 0 | |||
![]() Avnet Silica | B39262B4343P810 | Qualcomm RFFE Filter Products | SAW Filters Band Pass 2575GHz to 2615GHz 5 Pins SMD (Alt: B39262B4343P810) RoHS : Compliant | 0 | ||
| CLM1C-WKB-CX1X4343 | Cree, Inc. | (Alt: CLM1C-WKB-CX1X4343) RoHS : Compliant | 0 | |||
| ADD5043-433-2-GEVK | onsemi | AX5043 RF Transceiver DVK2 Evaluation Kit Addon Kit (Alt: ADD5043-433-2-GEVK) RoHS : Not Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SIW917Y-RB4343C | Silicon Laboratories Inc | 917 Wi-Fi 6 2.4 GHz Module (SoC) Radio Board, Bluetooth LE, 8MB Flash,Integrated Antenna, w/32KHz crystal |
| 0 | |
| SIW917Y-RB4343A | Silicon Laboratories Inc | SiWG917Y SoC Radio Board for Module, Wi-Fi 6 2.4 GHz Bluetooth LE 5.4, 8MB Flash, RF-Pin |
| 0 | ||
![]() Component Electronics, Inc | 45984-4343 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | |
| PE-64343 | Pulse Electronics Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | 4343 | Heyco | 0 | |||
| 34343 | Essentra Components | 0 | ||||
| 1343438 | Essentra Components | RIBBED PIPE PLUGLDPE BLUE | 0 | |||
| 1343439 | Essentra Components | RIBBED PIPE PLUGLDPE BLUE | 0 | |||
| 4343400-MT | PennEngineering (PEM) | 0 | ||||
| M4343 | Heyco | RLTCG M25 GRAYW/M9137 NUT | 0 | |||
| 20594343 | Essentra Components | 25X25MM1-3MMWT SQUARE INSERT G | 0 | |||
![]() EBV Elektronik | BCM43431KMLG | Broadcom Limited | (Alt: BCM43431KMLG) RoHS : Compliant | 0 | ||
| CYW43439KUBG | Infineon Technologies AG | WLBGA63 30 to 70 24 GHz singleband WLAN (Alt: SP005652997) RoHS : Compliant | 0 | |||
| CYW43438KUBGT | Infineon Technologies AG | SingleChip 24GHz IEEE 80211ac bgn MACBasebandRadio with Integrated Bluetooth 41 and FM Rece (Alt: SP005652985) RoHS : Compliant | 0 | |||
| CYW4343WKUBGT | Infineon Technologies AG | (Alt: SP005653017) RoHS : Compliant | 0 | |||
| CYW43439KUBGT | Infineon Technologies AG | Multiprotocol Module Bluetooth 50 LE52 EDR54 IEEE 80211bgn 24GHz to 25GHz (Alt: SP005653001) RoHS : Compliant | 0 | |||
| BCM43436PXKUBG | Broadcom Limited | 80211n WiFi Bluetooth 42 and FM Combo Chip (Alt: BCM43436PXKUBG) RoHS : Compliant | 0 | |||
| CD8069504343701S RG1W | Intel Corporation | (Alt: 999H4H) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 1234-343-25228 | TE Connectivity | Shell | 50 | ||
| 1234-343-15192 | TE Connectivity | Shell | 50 | |||
| 1234-343-25192 | TE Connectivity | Shell | 48 | |||
| 6134-343-25149 | TE Connectivity | Coupling Nut | 47 | |||
| 6134-343-2590 | TE Connectivity | Coupling Nut | 39 | |||
| M43435-1B-3-WHT | Breyden Products | Harness Mgmt |
| 15 | ||
| M43435-1B-2-YEL | Western Filament Inc | Cable Rt & Sec |
| 3 | ||
| M43435-2E-4-BLK | Western Filament Inc | Harness Mgmt |
| 3 | ||
| M43435-2A-4-NAT | Western Filament Inc | Harness Mgmt | 3 | |||
| M43435-15W-BLK | Breyden Products | Harness Mgmt | 2 | |||
| MIL-T-43435-I-3-B-RED | Breyden Products | Placeholder | 1 | |||
| M43435-1E-2-NAT | Western Filament Inc | Harness Mgmt | 1 | |||
| 34343 | Winchester Interconnect | Connector | 0 | |||
| MS21434-351 | Safran Electrical & Power UK | Switches | 0 | |||
| MS21434-341 | Safran Electrical & Power UK | Switches | 0 | |||
![]() Flip Electronics | CYW4343WKWBG | Cypress Semiconductor | Stock | 19,297 | ||
| CYW4343WKUBGT | Infineon Technologies AG | Stock RoHS : Compliant | 15,000 | |||
| CYW4343WKWBGT | Infineon Technologies AG | Stock, Ship Today |
| 15,000 | ||
| CYW4343WKUBG | Infineon Technologies AG | Stock | 4,297 | |||
| CYW4343W1KUBG | Infineon Technologies AG | Stock | 4,297 | |||
| BCM4343W1KUBG | Broadcom Limited | Stock | 4,297 | |||
| CYW4343W1KUBGT | Infineon Technologies AG | Stock, Ship Today |
| 4,297 | ||
MJE4343G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 39 | ||
![]() Master Electronics | 79-3434-33-04 | Franz Binder GmbH & Co | Cable Assembly PUR 2m Circular 4 POS F Crimp RoHS : Compliant |
| 33 | |
| 132043-4343 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 7 Pin 5 A PLB Series | ITT Cannon PLB4G620J07 RoHS : Compliant |
| 0 | ||
| 77-3434-3429-20004-0100 | Franz Binder GmbH & Co | M12-A Connecting cable male cable connector - female angled connector Contacts: 4 unshielded moulded on the cable IP68/IP69K UL PVC grey 4 x 0.34mm² 1 m RoHS : Compliant |
| 0 | ||
| 77-3434-3429-33004-0100 | Franz Binder GmbH & Co | FA12 MS12 TPE YELLOW RoHS : Compliant |
| 0 | ||
| 132043-4314 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 14 Pin 2 A PLB Series | ITT Cannon PLB4G820H14 RoHS : Compliant |
| 0 | ||
| 132043-4396 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 3 Pin 10 A PLB Series | ITT Cannon PLB4G420C03 RoHS : Compliant |
| 0 | ||
| 132043-4315 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 2 Pin 10 A PLB Series | ITT Cannon PLB4G620J02 RoHS : Compliant |
| 0 | ||
| 132043-4360 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 9 Pin 3 A PLB Series | ITT Cannon PLB4G220J09 RoHS : Compliant |
| 0 | ||
| 132043-4397 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 3 Pin 10 A PLB Series | ITT Cannon PLB4G520C03 RoHS : Compliant |
| 0 | ||
| 132043-4333 | ITT Interconnect Solutions | Circular Plastic Push Pull Receptacle Front Nut Gray 5 Pin 7 A PLB Series | ITT Cannon PLB4G420J05 RoHS : Compliant |
| 0 | ||
| 77-3434-3429-20004-0200 | Franz Binder GmbH & Co | M12-A Connecting cable male cable connector - female angled connector Contacts: 4 unshielded moulded on the cable IP68/IP69K UL PVC grey 4 x 0.34mm² 2 m RoHS : Compliant |
| 0 | ||
| 77-3434-3429-33004-0200 | Franz Binder GmbH & Co | FA12 MS12 TPE YELLOW RoHS : Compliant |
| 0 | ||
| 77-3434-3405-30003-1000 | Franz Binder GmbH & Co | Connecting Cables Male cable connector - female cable connector Contacts: 3 unshielded moulded on the cable IP67 UL TPE black 3 x AWG 22 10 m RoHS : Compliant |
| 0 | ||
| 77-3434-3429-20005-0200 | Franz Binder GmbH & Co | M12-A Connecting cable male cable connector - female angled connector Contacts: 5 unshielded moulded on the cable IP68/IP69K UL PVC grey 5 x 0.34mm² 2 m RoHS : Compliant |
| 0 | ||
| 6134-343-2590 | TE Connectivity | R CPLG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 2434370000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Interface Modules AMC 2.5 800V RoHS : Compliant |
| 50 | |
| 2434390000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AFS,4 2C 100-250V BK RoHS : Compliant |
| 50 | ||
| 21343435445050 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 5,0m RoHS : Unknown |
| 50 | ||
| 15544343 | Aptiv PLC | Connectors 31 way Male HES Circular Series Black CONN |
| 50 | ||
| 2434340000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks AMC 2.5 RoHS : Compliant |
| 50 | ||
| 21343435445010 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 1,0m |
| 43 | ||
| 21343435445100 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 10m |
| 25 | ||
| 21343435445015 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 S-cod 3+PE st/st m/f PUR 1,5m |
| 15 | ||
| 1834343 | Phoenix Contact | Cable Housing, 3.81mm 2 Position, KGG-MC 1,5/ 2 RoHS : Compliant |
| 0 | ||
| 2943437 | Phoenix Contact | Terminal Block Interface Modules EMG 12-TR/INV RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W14343 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1,231 | ||
| PE3W14343-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-12 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-12 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 737 | ||
| PE3W14343-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Low Loss Cable 36 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 36 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 36 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-36 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-36 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 245 | ||
| PE3W14343-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-60 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-60 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 147 | ||
| PE3W16434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Limited Detent SMP Male Bulkhead to MMCX Plug Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly limited detent SMP male bulkhead to MMCX plug cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The limited detent SMP male bulkhead to MMCX plug cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP bulkhead cable connection on one end and a MMCX cable connection on the other. Our SMP to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W16434-36 can also be known as a SMP plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has a between series connection. Our bulkhead SMP male to MMCX plug cable has a maximum VSWR of 1.4:1. SMP plug to MMCX male cable assembly PE3W16434-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16434-36 can also be used in the other direction and will be a MMCX plug to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to MMCX RF cable assembly as per your requirements. |
| 89 | ||
| PE3W12434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W12434-36 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W12434-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 jack to NEX10 jack cable assembly PE3W12434-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3W14343-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Low Loss Cable 120 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 120 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 120 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-120 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-120 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-120 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 73 | ||
| PE3W14343-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Low Loss Cable 300 Inch Length Using LMR-500-UF Coax., Radio frequency assembly N male to N male low loss cable 300 inch length using LMR-500-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 300 inch length using LMR-500-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W14343-300 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14343-300 RF cable has a TPE jacket of 0.500-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W14343-300 is built with LMR-500-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 29 | ||
| PE7434-30 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.6:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 30 dB. 0 to 30 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 8 GHz to 12.4 GHz. PE7434-30 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a female gender for connector 1 and a SMA female for connector 2. PE7434-30 variable attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 30 dB. This microwave variable attenuator has frequency range of 8 GHz to 12.4 GHz and a maximum VSWR of 1.6:1. Our countinously variable attenuator is rated to 5 Watt at the stated attenuation. Our variable attenuator PE7434-30 is shipped same day as purchased from Pasternack's facility certified to ISO 9001:2015. This attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE3C4343 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-200-UF Coax. PE3C4343 is a SMA male to SMA male right angle cable using LMR-200-UF coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4343 SMA male to SMA male right angle cable assembly is constructed with LMR-200-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4434-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 36 inches. SSMC Plug to TNC Male Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMC plug to TNC male low loss cable 36 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SSMC plug to TNC male low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our low loss SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4434-36, can also be known as a low loss SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4434-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 500 MHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4434-36 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male low loss cable 36 inch length using LMR-100 coax. |
| 0 | ||
| PE3W04343LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. MHV Female 4 Hole Flange to MHV Female 4 Hole Flange Cable Using RG58 Coax, LF Solder, RoHS. PE3W04343LF is a MHV female 4 hole flange to MHV female 4 hole flange cable using RG58 coax. This Pasternack MHV female 4 hole flange to MHV female 4 hole flange cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. Our female MHV 4 hole flange to female MHV 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04343LF MHV female 4 hole flange to MHV female 4 hole flange cable assembly is constructed with RG58 coax. | 0 | |||
| PE3M0434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Pin to MIL Size 12 Contact Socket Cable 36 Inch Length Using M17/113-RG316 Coax with Heat Shrink, LF Solder. The PE3M0434-36 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0434-36 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0434-36 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0434-36 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04343 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. MHV Female 4 Hole Flange to MHV Female 4 Hole Flange Cable Using RG58 Coax. PE3W04343 is a MHV female 4 hole flange to MHV female 4 hole flange cable using RG58 coax. This Pasternack MHV female 4 hole flange to MHV female 4 hole flange cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm MHV for connector 2. Our female MHV 4 hole flange to female MHV 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04343 MHV female 4 hole flange to MHV female 4 hole flange cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W14343LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-500-UF, RF Cable Type: LMR-500-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-500-UF Coax, LF Solder. PE3W14343LF is a N male to N male cable using LMR-500-UF coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14343LF N male to N male cable assembly is constructed with LMR-500-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 776434-3 | TE Connectivity | AS16,CAP ASSY,ST,06P,N SEAL,CODE C Nominal Voltage Architecture: 240 V 24 V 12 V 48 V Number of Positions: 6 Connector & Housing Type: Cap Connector System: Wire-to-Wire Mating Pin Diameter: 1.5 mm Ampseal 16 Connector Cap - Housings For Male Terminal | 240 V 6 | Part Number: 776434-3 | Internal Number: 776434-3 | Alias Number: AS16-ST-04-06PC-N | 1.5 mm | TE Connectivity RoHS : Compliant |
| 340 | |
| 1218434-3 | TE Connectivity | R/A RCP ASSY 25 POS SER 109 Number of Positions: 25 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Receptacle Cable-to-Board Board Mount | Part Number: 1218434-3 | Internal Number: 1218434-3 | TE Connectivity RoHS : Compliant |
| 98 | ||
![]() Vyrian | 2943437 | Phoenix Contact | Switches/Accessories RoHS : Compliant | 13,276 | ||
| 5434340 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,363 | |||
| AD9434-370EBZ | Analog Devices Inc | 9,875 | ||||
OPA4343NA/2K5G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 7,970 | |||
| 5434324 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,971 | |||
OPA4343UAG4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 6,271 | |||
| 5434311 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,006 | |||
| OPA4343EA | Texas Instruments | 5,913 | ||||
| 1943438 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,227 | |||
| 5962-01-434-3340 | Texas Instruments | 5,151 | ||||
| ADD5043-433-2-GEVK | onsemi | 5,108 | ||||
| 5434395 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,944 | |||
MJE4343G![]() | onsemi | Power Bipolar Transistor, 16A I(C), 160V V(BR)CEO, 1-Element, NPN, Silicon, TO-247, Plastic/Epoxy, 3 Pin RoHS : Compliant | 3,929 | |||
OPA4343NA/250G4![]() | Texas Instruments | Operational Amplifier, 4 Func, 8000uV Offset-Max, CMOS, PDSO14 RoHS : Compliant | 3,510 | |||
| 3754/34300 | 3m Electronic Products Division | Wire And Cable | 645 | |||
![]() Win Source Electronics | CYW43438KUBGT | Cypress Semiconductor | IC RF TXRX+MCU BLUETOOTH 63UFBGA / IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.0 2.4GHz 63-UFBGA, WLBGA |
| 90,000 | |
| ICS-43434 | TDK Invensense | MIC MEMS MULTI-MODE OMNI -26DB / Multi-Mode Microphone with I2S Digital Output |
| 50,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |