3730XF-R Price, Revenda, Stock

1 : $3,983.296
5 : $3,713.242
10 : $3,319.413
25 : $3,269.87
50 : $3,269.87
100 : $3,221.784
250 : $3,129.733
500 : $3,042.796
1,000 : $3,001.113
2,500 : $3,001.113
10,000 : $3,001.113

Flip Electronics

NLVHC4851ADTR2G-L23730

onsemi

Stock

11,077

NLVHC4051ADTR2G-L23730

onsemi

Stock, Ship Today

1 : $0.26

10,000

MC33730EK

NXP Semiconductors

Stock
RoHS : Compliant

3,546

Maritex

MS583730BA01-50

TE Connectivity

Pressure Sensors; MS583730BA01-50; TE CONNECTIVITY; 3.6 V; Surface Mount; 1.5 V; 1.5 %
RoHS : Compliant

2,500 : $8.436
1,000 : $9.424
100 : $10.678
50 : $11.385
10 : $12.601
1 : $15.499

1,762

Pasternack Enterprises US

PE3W16237-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to SMA Male Right Angle Low Loss Cable 300 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 300 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3W16237-300 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16237-300 RF cable has a TPE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W16237-300 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16237-300 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3FCA237-30M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA237-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA237-30M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $166.99
5 : $160.31
10 : $153.63
25 : $146.95

PE7337-30

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 30 dB, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, SMA Female To SMA Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7337-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a female gender on side 1 and a SMA female connector on side 2. The Pasternack PE7337-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7337-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $920.99
5 : $884.15
10 : $847.31

PE2237-30

Pasternack Enterprises

Key Specifications (Click on Data Sheet Above for Additional Details) .DirectionalityDirectionalConnector SeriesNConnector GenderFemaleDesignCouplerMinimum Frequency800 MHzMaximum Frequency2.5 GHzMaximum Input Power60 WattCoupling Value30 dB.

1 : $483.99
10 : $464.63
25 : $445.27
100 : $425.91

PE37305LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm N Female to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG6 Coax, LF Solder., Radio frequency assembly 75 Ohm N female to 75 Ohm F male cable 36 inch length using 75 Ohm RG6 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N female to 75 Ohm F male cable 36 inch length using 75 Ohm RG6 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and F type cable connection on the other. Our N type to type F cable assemblies have a female gender on end 1 and male on end 2. PE37305LF-36 can also be known as a type N jack to F type plug cable assembly and will be shipped same-day as it is purchased. Type N jack to type F plug cable assembly PE37305LF-36 is built with RG6 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this type N female to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37305LF-36 can also be used in the other direction and will be type F male to type N female cable assembly if the opposite connectivity is required. N type jack to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N female to 75 Ohm F male cable 36 inch length using 75 Ohm RG6 coax, LF solder.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3730LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female to SMA Male Cable 24 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to SMA male cable 24 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to SMA male cable 24 inch length using RG174 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assembly has female gender on end 1 and male on end 2. PE3730LF-24 can also be known as a BNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. BNC jack to SMA plug cable assembly PE3730LF-24 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3730LF-24 RF cable are available on our downloadable PDF datasheet.PE3730LF-24 can also be used in the other direction and will be SMA male to BNC female cable assembly if the opposite connectivity is required. BNC jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE37305LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm N Female to 75 Ohm F Male Cable 24 Inch Length Using 75 Ohm RG6 Coax, LF Solder., Radio frequency assembly 75 Ohm N female to 75 Ohm F male cable 24 inch length using 75 Ohm RG6 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N female to 75 Ohm F male cable 24 inch length using 75 Ohm RG6 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type F cable connection on the other. Our type N to type F cable assemblies have a female gender on end 1 and male on end 2. PE37305LF-24 can also be known as a N type jack to type F plug cable assembly and will be shipped same-day as it is purchased. Type N jack to F type plug cable assembly PE37305LF-24 is built with RG6 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this type N female to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37305LF-24 can also be used in the other direction and will be type F male to N type female cable assembly if the opposite connectivity is required. Type N jack to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to F type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N female to 75 Ohm F male cable 24 inch length using 75 Ohm RG6 coax, LF solder.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

PE3730LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female to SMA Male Cable 12 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly BNC female to SMA male cable 12 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to SMA male cable 12 inch length using RG174 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assembly has female gender on end 1 and male on end 2. PE3730LF-12 can also be known as a BNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. BNC jack to SMA plug cable assembly PE3730LF-12 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3730LF-12 RF cable are available on our downloadable PDF datasheet.PE3730LF-12 can also be used in the other direction and will be SMA male to BNC female cable assembly if the opposite connectivity is required. BNC jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

PE3730LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Cable Using RG174 Coax with HeatShrink, LF Solder. PE3730LF/HS is a SMA male to BNC female cable using RG174 coax. This Pasternack SMA male to BNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3730LF/HS SMA male to BNC female cable assembly is constructed with RG174 coax.

PE37304

Pasternack Enterprises

PE37301/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male to SSMB Jack Bulkhead Cable Using RG178 Coax with HeatShrink. PE37301/HS is a SMA male to SSMB jack bulkhead cable using RG178 coax. This Pasternack SMA male to SSMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our male SMA to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37301/HS SMA male to SSMB jack bulkhead cable assembly is constructed with RG178 coax.

PE37301LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMB Jack Bulkhead to SMA Male Cable Using RG178 Coax, LF Solder. PE37301LF is a SSMB jack bulkhead to SMA male cable using RG178 coax. This Pasternack SSMB jack bulkhead to SMA male cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMA for connector 2. Our jack SSMB bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37301LF SSMB jack bulkhead to SMA male cable assembly is constructed with RG178 coax.

PE3W13730

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB Positive Snap, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm SMB Positive Snap Plug Right Angle Cable Using 75 Ohm RG187 Coax. PE3W13730 is a BNC male to SMB Positive Snap plug right angle cable using RG187 coax. This Pasternack BNC male to SMB Positive Snap plug right angle cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm SMB Positive Snap for connector 2. BNC to SMB Positive Snap right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to plug SMB Positive Snap right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W13730 BNC male to SMB Positive Snap plug right angle cable assembly is constructed with RG187 coax.

PE37305LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm N Female to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG6 Coax, LF Solder., Radio frequency assembly 75 Ohm N female to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N female to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to F type cable assemblies have a female gender on end 1 and male on end 2. PE37305LF-12 can also be known as a type N jack to type F plug cable assembly and will be shipped same-day as it is purchased. N type jack to F type plug cable assembly PE37305LF-12 is built with RG6 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this type N female to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37305LF-12 can also be used in the other direction and will be type F male to N type female cable assembly if the opposite connectivity is required. Type N jack to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N female to 75 Ohm F male cable 12 inch length using 75 Ohm RG6 coax, LF solder.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

PE37305/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm. 75 Ohm N Female to 75 Ohm F Male Cable Using 75 Ohm RG6 Coax with HeatShrink. PE37305/HS is a N female to F male cable using RG6 coax. This Pasternack N female to F male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm F for connector 2. Our female N to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE37305/HS N female to F male cable assembly is constructed with RG6 coax.

Vyrian

AL16937-30BAS7-13

Diodes Incorporated

LED Driver, 2-Segment, PDSO7

16,782

37300500410

Littelfuse Inc

Electric Fuse, Very Fast Blow, 0.05A, 250VAC, 50A (IR), Through Hole, TR5
RoHS : Compliant

10,639

DM3730CBP

Texas Instruments

RISC Microprocessor, 32-Bit, 800MHz, CMOS, PBGA515
RoHS : Compliant

9,615

DM3730CBC100

Texas Instruments

RISC Microprocessor, 32-Bit, 1000MHz, CMOS, PBGA515
RoHS : Compliant

8,403

DM3730CBCD100

Texas Instruments

RISC Microprocessor, 32-Bit, 1000MHz, CMOS, PBGA515
RoHS : Compliant

7,782

MPD23730HFG

Texas Instruments

6,520

MCZ33730EK

NXP Semiconductors

Analog Circuit, 1 Func, 1 Channel, PDSO32
RoHS : Compliant

6,283

JM38510/37302SDA

Texas Instruments

6,228

6N137-30ME

Broadcom Limited

5,957

M38510/37301SDX

Texas Instruments

NOR Gate, ALS Series, 4-Func, 2-Input, TTL

5,535

37306300430

Littelfuse Inc

Electric Fuse, Very Fast Blow, 0.63A, 250VAC, 50A (IR), Through Hole, TR5
RoHS : Compliant

4,859

37300630410

Littelfuse Inc

Electric Fuse, Very Fast Blow, 0.063A, 250VAC, 50A (IR), Through Hole, TR5
RoHS : Compliant

4,643

M38510/37302BCA

Texas Instruments

NOR Gate, ALS Series, 3-Func, 3-Input, TTL, CDIP14
RoHS : Not Compliant

4,150

KIT33730EKEVBE

NXP Semiconductors

3,866

JM38510/37301B2A

Texas Instruments

NOR Gate, ALS Series, 4-Func, 2-Input, TTL, CQCC20
RoHS : Not Compliant

3,603

Waytek, Inc.

1600-037-300-15

30A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $4.5821
50 : $3.8547
100 : $3.3799
200 : $3.1882
500 : $3.0569

263

Win Source Electronics

DMN3730UFB-7

Diodes Incorporated

Trans MOSFET N-CH 30V 0.91A 3-Pin DFN T/R / MOSFET N-CH 30V 750MA DFN
RoHS : Compliant

178 : $1.6898
133 : $1.8847
103 : $1.9497
75 : $2.0147
49 : $2.0797
20 : $2.5346

100,000

DMC3730UFL3-7

Diodes Incorporated

MOSFET N/P-CHA 30V 1.1A DFN1310 / Mosfet Array N and P-Channel Complementary 30V 1.1A, 700mA 390mW Surface Mount X2-DFN1310-6 (Type B)
RoHS : Compliant

2,560 : $0.1313
1,915 : $0.1464
1,480 : $0.1514
1,075 : $0.1565
695 : $0.1615
285 : $0.1968

79,000

DMN3730UFB4-7

Diodes Incorporated

MOSFET N-CH 30V 750MA DFN
RoHS : Compliant

305 : $0.9924
230 : $1.1069
175 : $1.1451
130 : $1.1833
85 : $1.2214
35 : $1.4886

52,000

DMN3730UFB4-7B

Diodes Incorporated

MOSFET N-CH 30V 750MA 3DFN
RoHS : Compliant

305 : $0.9924
230 : $1.1069
175 : $1.1451
130 : $1.1833
85 : $1.2214
35 : $1.4886

48,840

DMN3730UFB4-7(NF)

Diodes Incorporated

305 : $0.9924
230 : $1.1069
175 : $1.1451
130 : $1.1833
85 : $1.2214
35 : $1.4886

48,790

IS31FL3730-QFLS2-TR

Lumissil Microsystems

IC LED DRVR LIN I2C 40MA 24QFN / LED Driver IC 16 Output Linear I²C Dimming 40mA 24-QFN (4x4)
RoHS : Compliant

300 : $1.0021
225 : $1.1177
175 : $1.1562
130 : $1.1948
85 : $1.2333
35 : $1.5031

14,051

HCNW137-300E

Broadcom Limited

OPTOISO 5KV OPEN COLLECTOR 8SO
RoHS : Compliant

320 : $1.2317
240 : $1.3738
185 : $1.4212
135 : $1.4685
90 : $1.5158
40 : $1.8474

7,550

MIC37302WR

Microchip Technology Inc

IC REG LDO ADJ 3A SPAK-5
RoHS : Compliant

157 : $2.1412
118 : $2.3883
91 : $2.4706
66 : $2.5529
43 : $2.6354
18 : $3.2118

7,500

HCNW137#300

Broadcom Limited

OPTOISO 5KV OPEN COLLECTOR 8SO / Optocoupler Logic-Out Open Collector DC-IN 1-CH 8-Pin PDIP W SMD Tube
RoHS : Not Compliant

415 : $0.7257
310 : $0.8094
240 : $0.8373
175 : $0.8653
115 : $0.8932
50 : $1.0885

7,280

MIC37302WR-TR

Microchip Technology Inc

IC REG LDO ADJ 3A SPAK-5
RoHS : Compliant

157 : $2.1412
118 : $2.3883
91 : $2.4706
66 : $2.5529
43 : $2.6354
18 : $3.2118

6,770

MS583730BA01-50

TE Connectivity

SENSOR 435.1PSIA 24BIT / Pressure Sensor 435.1PSI (3000kPa) Absolute 24 b 4-SMD Module
RoHS : Compliant

43 : $7.0603
32 : $7.8749
25 : $8.1464
18 : $8.418
12 : $8.6895
5 : $10.5904

5,500

MIC37303YME-TR

Microchip Technology Inc

IC REG LDO ADJ 3A 8SOIC
RoHS : Compliant

260 : $1.1735
195 : $1.3089
150 : $1.354
110 : $1.3991
70 : $1.4443
30 : $1.7602

5,325

TPS23730RMTR

Texas Instruments

IEEE 802.3BT TYPE-3 CLASS 1-6 PO / Power Over Ethernet Controller 1 Channel 802.3at (PoE+), 802.3bt 45-VQFN (7x5)
RoHS : Compliant

90 : $3.3485
67 : $3.7349
52 : $3.8637
38 : $3.9925
25 : $4.1213
10 : $5.0228

4,192

DM3730CUS100

Texas Instruments

IC DGTL MEDIA PROCESSOR 423FCBGA
RoHS : Compliant

8 : $47.809
6 : $53.3254
5 : $55.1643
3 : $57.0031
2 : $58.8419
1 : $71.7135

3,759

MIC37303YME

Micrel Inc

3.0A, Low-Voltage μCap LDO Regulator
RoHS : Compliant

194 : $1.5514
145 : $1.7305
112 : $1.7901
82 : $1.8498
53 : $1.9095
22 : $2.3271

3730XF-R Revenda

Ligação URL