3512-3HT2-R Price, Revenda, Stock

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

MP-01-103-512

Southco

RRH-35-12-50

Essentra Components

BSOA-M3.5-12

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.When blind-threaded types are used outer sheet surfaces are not only flush but closed as

62-421-351-2

Southco

47-80-351-22

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

FH-M3.5-12ZI

PennEngineering (PEM)

STUD, FLUSH, STEEL M3.5THREAD

RFS2-35-12-A5

Essentra Components

E5-2-035-121

Southco

E5-2-035-121

035123111303

Essentra Components

E5-8-135-121

Southco

E5-8-135-121

12SWS3512B

Essentra Components

SHOULDER WASHER, .385 ID, .872

32100535-12

RAF Electronic Hardware

EBV Elektronik

MP-2835-12D2-40-80

Luminus Devices

(Alt: MP-2835-12D2-40-80)
RoHS : Compliant

824,000

MP-2835-1200-B

Luminus Devices

(Alt: MP-2835-1200-B)
RoHS : Compliant

28,000

MP-2835-12D2-40-80-E2-ZA-M3

Luminus Devices

2835 Mid Power LED CCT4000K CRI80 (Alt: MP-2835-12D2-40-80-E2-ZA-M3)
RoHS : Compliant

12,000

FDC3512

onsemi

NChannel PowerTrench MOSFET 80V 30A 77mO (Alt: FDC3512)
RoHS : Compliant

3,000

FNA23512A

onsemi

Intelligent Power Module 1200 V 35A (Alt: FNA23512A)
RoHS : Compliant

MP-2835-12D2-40-90

Luminus Devices

(Alt: MP-2835-12D2-40-90)
RoHS : Compliant

MP-2835-12D2-30-90

Luminus Devices

(Alt: MP-2835-12D2-30-90)
RoHS : Compliant

MP-2835-12D2-65-80

Luminus Devices

(Alt: MP-2835-12D2-65-80)
RoHS : Compliant

MP-2835-120K-40-90

Luminus Devices

(Alt: MP-2835-120K-40-90)
RoHS : Compliant

MP-2835-120K-65-90

Luminus Devices

(Alt: MP-2835-120K-65-90)
RoHS : Compliant

MP-2835-12FY-65-90

Luminus Devices

(Alt: MP-2835-12FY-65-90)
RoHS : Compliant

2PS13512E43W35222NOSA1

Infineon Technologies AG

IGBT Stack For Various Inverter Application (Alt: SP000861944)
RoHS : Not Compliant

LBY1SG-T1U2-35-1-20-R18-Z

ams OSRAM Group

LED Single Chip Blue 470nm 30mA 2Pin SMD TR (Alt: Q65113A3369)
RoHS : Compliant

GWJCLPS2.EM-H3H8-A535-1-2

ams OSRAM Group

LED Chip Neutral White 4000K 150mA 2Pin SMD TR (Alt: Q65112A8483)
RoHS : Compliant

MP-2835-12D2-30-80-E1-ZA-M3

Luminus Devices

2835 Mid Power LED CCT3000K CRI80 (Alt: MP-2835-12D2-30-80-E1-ZA-M3)
RoHS : Compliant

ECCO

RMW-35/12-100/ADH-0

TE Connectivity

1 : $1.9294

Flip Electronics

FDS3512

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.66

15,000

EPM3512AFC256-10

Altera Corporation

Stock
RoHS : Not Compliant

3,113

EPM3512AFC256-10N

Altera Corporation

Stock, Ship Today
RoHS : Compliant

1 : $54.02

3,113

SII3512ECTU128

Lattice Semiconductor Corporation

Stock, Ship Today
RoHS : Compliant

1,153

NFAL3512L5BT

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $47.42

456

NFVA23512NP2T

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $71.5

BLS6G3135-120,112

Flip Electronics Manufacturing Services

Stock, Ship Today

Maritex

APV-35-12

Mean Well

Power Supply; LED; 36W; 12V; 3A; 90-264VAC; 127-370VDC; IP42
RoHS : Compliant

20 : $10.2
10 : $10.599
5 : $11.001
1 : $11.599

1,148

CP3512P1H00-LF

Cvilux Corporation

Header for PCB; pitch 3.00mm; 12-contacts [2x6]; THT; male; side entry; 2 rows; 250V/5A
RoHS : Compliant

480 : $0.21
240 : $0.243
120 : $0.258
25 : $0.279
1 : $0.312

1,088

CP3512P0010

Cvilux Corporation

Crimp terminal housing; pitch 3.00mm; 12-contacts [2x6]; male; 2 rows; applicable wire AWG#20-24; 250V/5A
RoHS : Compliant

500 : $0.092
200 : $0.107
50 : $0.118
1 : $0.138

1,015

SCP-35-12

Mean Well

Power Supply; module; 35.9W; 13.8V; 2.6A; 85-264VAC; 120-370VDC
RoHS : Compliant

20 : $17.301
10 : $17.799
5 : $18.6
1 : $19.6

1,011

RS-35-12

Mean Well

Power Supply; module; 36W; 12V; 3A; 88-264VAC; 125-373VDC
RoHS : Compliant

20 : $12.101
10 : $12.5
5 : $13.001
1 : $13.699

286

CP3512P1HSO

SCANDINAVIAN-RADIO

Header for PCB; pitch 3.00mm; 12-contacts [2x6]; SMD; male; side entry; 2 rows; 250V/5A

250 : $0.839
25 : $0.916
5 : $0.969
1 : $1.033

197

P13512+ LN

BEISIT

Cabel Gland PG13.5; nylon; PG13.5 5-9.00mm; Flat O-ring; with lock nut; grey; for wrench 24

100 : $0.384
50 : $0.399
25 : $0.425
5 : $0.437
1 : $0.46

100

CLEDA351202

LEDCONN

LED connector; SMD; Number of contacts: 2; load capacity 1A; voltage 250V

900 : $0.087
500 : $0.1
100 : $0.113
1 : $0.125

P13512B + LN

BEISIT

Cabel Gland PG13.5; nylon; PG13.5 6-12mm; Flat O-ring; with lock nut; black

100 : $0.381
50 : $0.402
25 : $0.425
5 : $0.437
1 : $0.46

P13512B+LN

BEISIT

Cabel Gland PG13.5; nylon; PG13.5 5-9.0mm; Flat O-ring; with lock nut; black; for wrench 24

100 : $0.583
50 : $0.611
25 : $0.647
5 : $0.668
1 : $0.703

EPS-35-12

Mean Well

Power supply; 36W; 12V; 3A; 85-264VAC; 120-370VDC
RoHS : Compliant

20 : $10.901
10 : $11.2
5 : $11.799
1 : $12.4

GLAND-P13512GR-LN-CT

CONNTHERM

Cabel Gland PG13.5; nylon; PG13.5 6-12mm; Flat O-ring; with lock nut; grey

50 : $0.317
25 : $0.338
10 : $0.358
5 : $0.379
1 : $0.396

PCF8574T/3,512

NXP Semiconductors

I/O Port Expanders; PCF8574T/3,512; NXP SEMICONDUCTORS; 16
RoHS : Compliant

100 : $1.325
25 : $1.614
10 : $1.75
1 : $2.432

CP3512P1V00-LF

Cvilux Corporation

Header for PCB; pitch 3.00mm; 12-contacts [2x6]; THT; male; top entry; 250V/5A
RoHS : Compliant

600 : $0.179
360 : $0.197
120 : $0.205
25 : $0.22
1 : $0.248

NID35-12

Mean Well

DC/DC converter; 34.8W; 12V; 0-2.9A; 20-53VDC
RoHS : Compliant

20 : $7.251
10 : $7.54
5 : $7.829
1 : $8.121

Neutron USA

PWR263S-35-1200FE

Bourns Inc

Thick Film Resistors - SMD 1% TOL 120 Ohm AEC-Q200
RoHS : Compliant

1 : $29.99

T4113512041-000

TE Connectivity

M12 M 4P GOLD D.CODE RA SHIELDED PG9
RoHS : Compliant

1 : $95.2

REC3.5-1212SRW/R8/C

RECOM Power GmbH

Isolated DC/DC Converter, 3.5W DC/DC 8kV REG 12Vin 12Vout
RoHS : Compliant

1 : $96.96

443512-1-02N

Grayhill Inc

Rotary Switches 44M30-02-1-02N,SPR RTN
RoHS : Compliant

1 : $194.99

P7-535121

OTTO Engineering Inc

Basic / Snap Action Switches Standard Sldr 5A SPST-DB, SPDT-DB

1 : $179.99

AFB03512HA-AF00

Delta Electronics Inc

DC Fans 35x35x10mm 12V DC 1.08W, 5.5CFM 22dB, Tach

1 : $84.14

CFM-6025BF-250-351-20

CUI Inc

DC Fan, sq0x25 mm, 24 Vdc 0.11A, ball, 5000 RPM, 23.95 CFM, 35.2dB(A),TS, 3wire

1 : $74.02

LP3-V12L3512

OTTO Engineering Inc

Pushbutton Switches Illuminated Pushbutton Switch- Vandal Resistent
RoHS : Compliant

1 : $134.99

3273512

Phoenix Contact

Distribution Block, 1 level19-Conn, Push-in, 12AWG, 450V, 24A, PTFIX 6/18X2,5-G GN
RoHS : Compliant

1 : $93.88

AFB03512HA-AR00

Delta Electronics Inc

DC Fans 35x35x10mm 12V DC Fan w/ Speed Sensor (Lock)

1 : $94.01

KVR100X64C3/512

Kingston Technology Company

512MB 64X64 PC100 SDRAM 100MHZ NON ECC DIMM CL3
RoHS : Unknown

1 : $72.39

LP3-V13P3512

OTTO Engineering Inc

Pushbutton Switches Illuminated Pushbutton Switch- Vandal Resistent
RoHS : Compliant

1 : $134.99

AD3512HB-G50-LF

ADDA USA Corporation

DC Fans Axial Fan, 35x35x10mm, 12VDC, 7.2CFM, 1.32W, 37.6dBA, 0.174"H2O, Ball, Lead Wire

1 : $87.84

TXL 035-1212D

Traco Power

Switching Power Supplies

1 : $195.5

DTSE9G3/512GB

Kingston Technology Company

512GB 220MB/S METAL USB 3.2 GEN 1 DATATRAVELER SE9 G3

1 : $62.11

Pasternack Enterprises US

PE3C3512LF-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG188-DS Coax, LF Solder., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3512LF-48 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C3512LF-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG188-DS coax, LF solder.

1 : $84.59
25 : $80.36
50 : $76.13
100 : $72.75

338

PE3W11035-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3W11035-120 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3W11035-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 120 inch length using LMR-400-UF coax.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

164

PE3C4135-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Male to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 7/16 DIN cable is a male to male coax assembly, PE3C4135-12, can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C4135-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4135-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder.

1 : $177.99
25 : $169.09
50 : $160.19
100 : $153.07

PE3C3512-24

Pasternack Enterprises

1 : $57.79
25 : $54.9
50 : $52.01
100 : $49.7

PE3C10335-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 7/16 DIN Male Low PIM Cable 12 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10335-12 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10335-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10335-12 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10335-12 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $156.99
25 : $150.71
50 : $146.0
100 : $142.86

PE3M0435-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 16 Contact Pin to MIL Size 16 Contact Socket Cable, D38999 Series I, III, IV, 12 Inch Length Using M17/113-RG316. The PE3M0435-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0435-12 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0435-12 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0435-12 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $132.99
10 : $127.67
25 : $122.35
100 : $117.03

PE3512/HS

Pasternack Enterprises

PE3835-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3835-12, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3835-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3835-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using RG316 coax.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE35121-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. 3.5mm Male to 3.5mm Female Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 3.5mm to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 3.5mm cable connection on one end and 3.5mm cable connection on the other. Our 3.5mm to 3.5mm cable assemblies have a male gender on end 1 and female on end 2. This 3.5mm to 3.5mm cable is a male to female coax assembly, PE35121-12, can also be known as a 3.5mm plug to 3.5mm jack cable assembly and will be shipped same-day as it is purchased. 3.5mm plug to 3.5mm jack cable assembly PE35121-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3.5mm male to 3.5mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35121-12 can also be used in the other direction and will be 3.5mm female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to 3.5mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 3.5mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 3.5mm male to 3.5mm female cable 12 inch length using PE-SR402FL coax.

1 : $335.99
25 : $319.19
50 : $302.39

PE3512LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512LF-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512LF-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512LF-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using RG142 coax, RoHS.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3C1935-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to N Female Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly TNC male to N female low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N female low loss cable 12 inch length using LMR-195 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C1935-12 can also be known as a low loss TNC plug to N type jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3C1935-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1935-12 can also be used in the other direction and will be type N female to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female low loss cable 12 inch length using LMR-195 coax.

1 : $102.99
25 : $97.84
50 : $92.69
100 : $88.57

PE3512-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512-48 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using RG142 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3C3935-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug to SMA Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MMCX plug to SMA female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMA female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMA bulkhead cable connection on the other. Our MMCX to SMA cable assembly has plug gender on end 1 and female on end 2. PE3C3935-12 can also be known as a MMCX male to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MMCX male to SMA jack cable assembly PE3C3935-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C3935-12 RF cable are available on our downloadable PDF datasheet.PE3C3935-12 can also be used in the other direction and will be SMA female bulkhead to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX RF cable assembly as per your requirements.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE3C6351-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Fire Rated 4.3-10 Female to N Male Low PIM Cable 24 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP N type cable is a female to male coax assembly, PE3C6351-24, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly PE3C6351-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6351-24 can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to N male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3512LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to SMA Male Right Angle Cable 72 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3512LF-72, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3512LF-72 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3512LF-72 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 72 inch length using RG142 coax, RoHS.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

Relay Specialties

STA-3512B

Stancor

STANCOR POWER SOURCES WALL PLU

1 : $8.39
5 : $8.13
10 : $7.88
25 : $7.65
50 : $6.89

273-5-120

Time Mark Corporation

Current Monitor Relay 0.5-5 A AC; 120V AC; 1C SPDT Socketable

1 : $115.0
5 : $106.15
10 : $98.57
25 : $95.17

TE Connectivity

T4133512041-000

TE Connectivity

M12,FRONT MOUNT,FEMALE,D,4P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 18 | M12 Panel Mount Solder Cup | Part Number: T4133512041-000 | Internal Number: T4133512041-000 | TE Connectivity
RoHS : Compliant

100 : $20.83
50 : $21.82
25 : $22.81
10 : $23.8
1 : $24.79

566

T4133512051-000

TE Connectivity

M12,FRONT MOUNT,FEMALE,D,5P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 5 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 5 18 | M12 Panel Mount Solder Cup | Part Number: T4133512051-000 | Internal Number: T4133512051-000 | TE Connectivity
RoHS : Compliant

250 : $22.94
100 : $23.86
50 : $24.77
25 : $25.69
10 : $26.61
1 : $27.52

242

KUP-14A35-120

TE Connectivity

KUP-14A35-120=KU Relay & Contactor Type: General Purpose Power Relay Current Type: AC Coil Magnetic System: Monostable Contact Arrangement: 3 Form C 3PDT-CO Contact Current Rating: 10 A General Purpose Power Relay AC Monostable 3 Form C 3PDT-CO | Electromechanical Relay | Part Number: KUP-14A35-120 | Internal Number: 8-1393117-7 | TE Connectivity
RoHS : Compliant

100 : $72.93
50 : $76.4
25 : $79.87
10 : $83.35
1 : $86.82

152

T4133512021-000

TE Connectivity

M12,FRONT MOUNT,FEMALE,D,2P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 2 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 2 18 | M12 Panel Mount Solder Cup | Part Number: T4133512021-000 | Internal Number: T4133512021-000 | TE Connectivity
RoHS : Compliant

500 : $15.34
250 : $15.87
100 : $16.39
50 : $16.93
25 : $17.45
10 : $17.98
1 : $18.52

T1739035120-000

TE Connectivity

H3A-MTGVB-M20-EMC Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1739035120-000 | Internal Number: T1739035120-000 | TE Connectivity
RoHS : Compliant

50 : $13.12
25 : $13.9
10 : $14.67
1 : $15.44

Venkel Ltd.

TRCR0603-512MT

VENKEL LTD

Trimmable CR;0603;5.1K;�20%
RoHS : Compliant

Vyrian

PWR263S-35-1200F

Bourns Inc

Fixed Resistor, Metal Glaze/thick Film, 35W, 120ohm, 250V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 4035
RoHS : Compliant

16,894

AP7335-12WG-7

Diodes Incorporated

Fixed Positive LDO Regulator, 1.2V, 0.3V Dropout, PDSO5

16,462

RMW-35/12-1200/ADH-0

TE Connectivity

HEAT SHRINK TUBE, DUAL WALL, 35 ID Before Shrink, 3:1 Shrink Ratio, BLACK
RoHS : Compliant

10,524

F433512PGC

Texas Instruments

7,798

KTM0023/512

Kingston Technology Company

6,650

OM8P0S3512Q-A0

Kingston Technology Company

Flash Module, 512GX8
RoHS : Compliant

4,627

EPM3512AQI208-10

Intel / Altera

EE PLD, 10ns, 512-Cell, CMOS, PQFP208

3,972

EPM3512AFC256-7

Intel Corporation

EE PLD, 7.5ns, 512-Cell, CMOS, PBGA256
RoHS : Not Compliant

3,868

EPM3512AFI256-10N

Intel / Altera

EE PLD, 10ns, 512-Cell, CMOS, PBGA256

3,695

KVR400D2S8R3/512

Kingston Technology Company

3,400

DHKVR133X64C3512

Kingston Technology Company

3,391

DHKVR133X72RC3512

Kingston Technology Company

3,369

KTA-PBG4333/512-G

Kingston Technology Company

2,794

KVR133X64C3/512

Kingston Technology Company

2,640

KTN-PM533/512

Kingston Technology Company

2,514

Waytek, Inc.

180351-2

TE Connectivity

Terminal For Relay Connector 1/4" PUSH-ON, 12-10 GA
RoHS : Compliant

50 : $0.2247
200 : $0.2044
500 : $0.1876
1,000 : $0.173

10,865

180351-2

TE Connectivity

Terminal for Relay Connector 1/4" push on, 10-12 GA. wire 3,000/Reel
RoHS : Compliant

3,000 : $0.1443
15,000 : $0.1322

10,333

HDBB-335-1-250

3M HDBB-335-1-250 heat shrinkable cable breakout boot is a 3-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 2.40"/1.40" outlet dimensions for larger breakout sealing.

1 : $66.6
5 : $62.42
10 : $58.61
25 : $55.95
50 : $54.42