| Os motores de busca de Datasheet de Componentes eletrônicos |
|
325G-C2-R0 Revenda |
| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty. BuyNow | |
![]() Rochester Electronics | 74CBTLV3257DS,118![]() | NXP Semiconductors | IC Multiplexer/Demultiplexer 1 Element 4 x 2:1 MUX/DEMUX 2.3V - 3.6V 16-SOP T/R RoHS : Compliant |
| 72,227 | |
74CBTLV3257DS,118![]() | Nexperia | IC Multiplexer/Demultiplexer 1 Element 4 x 2:1 MUX/DEMUX 2.3V - 3.6V 16-SOP T/R RoHS : Compliant |
| 1,397 | ||
74FST3253D![]() | onsemi | IC Multiplexer/Demultiplexer 1 Element 2 x 4:1 MUX/DEMUX 4V - 5.5V 16-SOIC Rail RoHS : Not Compliant |
| 29,735 | ||
| MAX32550-SCC+T | Analog Devices Inc | MAX32550 SEC CORTEX-M3 CSBGA | 10,000 | |||
AD8325ARUZ![]() | Analog Devices Inc | Video Processor Driver Consumer Video 28-SOP Tube RoHS : Compliant |
| 998 | ||
| LM4050BEM3-2.5/V+T | Analog Devices Inc | IC VOL REF Shunt Fixed 2.5V 15mA ±0.2% SOT-23-3 T/R RoHS : Compliant |
| 25,000 | ||
| LTC1325CSW#PBF | Analog Devices Inc | Battery Charger IC Multi-Chemistry 3.072V 18-SOIC Tube RoHS : Compliant |
| 10 | ||
| LTC3252EDE#PBF | Analog Devices Inc | Switched Capacitor Regulator, 2000kHz Switching Freq-Max, CMOS, PDSO12 RoHS : Compliant |
| 5,404 | ||
| LM4050AEX3-2.5+ | Analog Devices Inc | IC VOL REF Shunt Fixed 2.5V 15mA ±0.1% SOT-323 T/R RoHS : Compliant |
| 417 | ||
REG113EA-3.3/250![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 400mA 8-SOP T/R RoHS : Compliant |
| 15 | ||
| GC5325IZND | Texas Instruments | RF and Baseband Circuit, PBGA352 RoHS : Compliant |
| 10,747 | ||
REG113NA-3.3/250![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.3V 400mA SOT-23-5 T/R RoHS : Compliant |
| 42 | ||
| HPIXP2325ABT | Intel Corporation | Westport Network Processor |
| 785 | ||
LTC3252EDE#PBF![]() | Linear Technology | Switched Capacitor Regulator, 2000kHz Switching Freq-Max, CMOS, PDSO12 RoHS : Compliant |
| 2,184 | ||
| LM4050CEM3-2.5 | National Semiconductor Corporation | IC VOL REF Shunt Fixed 2.5V 15mA ±0.5% SOT-23-3 T/R RoHS : Not Compliant |
| 4,000 | ||
![]() Coilcraft Direct | MSS6132-563MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 2,090 | |
| GA3250-EEC | Coilcraft Inc | Coupled inductor, for MAX 14521E, SMT, RoHS Halogen-Free RoHS : Compliant |
| 1,666 | ||
| GA3252-ALD | Coilcraft Inc | Power inductor, for NSC LM3433, toroid, 20% tol, SMT, RoHS RoHS : Compliant |
| 473 | ||
| MSS6132-562MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 277 | ||
| HPH6-0325L | Coilcraft Inc | Hexa-Path configurable magnetics, high inductance, SMT, RoHS RoHS : Compliant |
| 70 | ||
| DFT4532-513BLC | Coilcraft Inc | Common mode choke, data line, SMT, ROHS RoHS : Compliant |
| 62 | ||
| HP6-0325L | Coilcraft Inc | Hexa-Path configurable magnetics, high current, SMT, RoHS RoHS : Compliant |
| 28 | ||
| DMT3-257-4.9L | Coilcraft Inc | Power choke, toroid, RoHS RoHS : Compliant | 4 | |||
| CMT3-2.5-15L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 2 | ||
| GA3250-BLC | Coilcraft Inc | Coupled inductor, for MAX 14521E, SMT, RoHS RoHS : Compliant | 0 | |||
| SK325-2 | Coilcraft Inc | Super Kit, 0805HQ chip inductors, 2% tol, RoHS RoHS : Compliant |
| 0 | ||
| C325 | Coilcraft Inc | Designer's Kit, 0805HQ chip inductors, 5% tol, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| SK325 | Coilcraft Inc | Super Kit, 0805HQ chip inductors, 5% tol, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
| DFT4532-513SLC | Coilcraft Inc | Common mode choke, data line, SMT, ROHS RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | REF3325AIDBZR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 2,327 | ||
| 432550091 | Molex | AVAILABLE EU | 1,491 | |||
| UMK325AB7106KMHP | TAIYO YUDEN | AVAILABLE EU RoHS : Compliant | 21,000 | |||
| 432550083 | Molex | AVAILABLE EU | 4,265 | |||
| MFSD0132502 | Bourns Inc | AVAILABLE EU | 908 | |||
| HMK325C7475KMHPE | TAIYO YUDEN INC | AVAILABLE EU | 6,000 | |||
| SRF4532510Y | AVAILABLE EU | 1,172 | ||||
| NCSW170BTASW60B315R325R350R3 | Nichia Corporation | AVAILABLE EU | 2,625 | |||
| EMK325ABJ107MMT | TAIYO YUDEN | AVAILABLE EU | 2,114 | |||
| B32522C0475J | AVAILABLE EU | 3,000 | ||||
| LM4040AIM325NOPB | TEXAS INSTRUMENTS INC | AVAILABLE EU | 1,627 | |||
| B32529D3224J | EPCOS AG | AVAILABLE EU | 2,807 | |||
| LDE256325B744H | Foxconn | AVAILABLE EU | 632 | |||
| ABM325000MHZD2YT | Abracon Corporation | AVAILABLE EU | 24,702 | |||
| AMK325ABJ337MMT | TAIYO YUDEN | AVAILABLE EU | 1,419 | |||
![]() ComSIT USA | 74CBT3253PWR | Texas Instruments | DUAL 1 OF 4 FET MULTIPLEXER/DEMULTIPLEXER Multiplexer And Demux/Decoder, CBT/FST/QS/5C/B Series, 2-Func, 1 Line Input, 4 Line Output, True Output, CMOS, PDSO16 RoHS : Compliant | 11,000 | ||
| B32522C6683K | TDK Electronics | METALLIZED POLYESTER FILM CAPACITOR Film Capacitor, Polyester, 400V, 10% +Tol, 10% -Tol, 0.068uF, Through Hole Mount RoHS : Compliant | 11,000 | |||
| B32563J6105K4Z1 | TDK Electronics | METALLIZED POLYESTER FILM CAPACITOR Film Capacitor, Polyester, 400V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount RoHS : Compliant | 9,350 | |||
| B32529C105K189 | TDK Electronics | METALLIZED POLYESTER FILM CAPACITOR Film Capacitor, Polyester, 63V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount RoHS : Compliant | 9,000 | |||
| SFH325FA3A | OSRAM GmbH | SILICON NPN PHOTOTRANSISTOR IN SMT SIDELED-PACKAGE Photo Transistor, 980nm, 0.015A I(C) RoHS : Not Compliant | 6,010 | |||
| B32529A5335M503 | TDK Electronics | Electronic Component RoHS : Not Compliant | 3,200 | |||
| CETMK325B7106KMHP | TAIYO YUDEN | Electronic Component RoHS : Compliant | 3,000 | |||
| LELRXK471M1HSA1325 | Lelon Electronics Corp | Electronic Component RoHS : Compliant | 3,000 | |||
PI5C3257QE![]() | Pericom Semiconductor Corporation | QUAD 2:1 MUX/DEMUX BUSSWITCH Bus Exchanger, CBT/FST/QS/5C/B Series, 4-Func, 1-Bit, True Output, CMOS, PDSO16 RoHS : Compliant | 2,067 | |||
| B32529C0332K000 | TDK Electronics | Film Capacitor, Polyethylene Terephthalate, 63V, 10% +Tol, 10% -Tol, 0.0033uF, Through Hole Mount RoHS : Not Compliant | 2,000 | |||
IDTQS3257QG8![]() | Integrated Device Technology Inc | Multiplexer And Demux/Decoder, 4-Func, True Output, CMOS, PDSO16 RoHS : Compliant | 1,180 | |||
QS3257S1G![]() | Integrated Device Technology Inc | HIGH-SPEED CMOS LVTTL-COMPATIBLE QUAD 2:1 MULTIPLEXER/DEMULTIPLEXER Multiplexer/Demultiplexer RoHS : Compliant | 1,135 | |||
| RGA222M1ESA1325 | Lelon Electronics Corp | Electronic Component RoHS : Compliant | 600 | |||
| LM4050CIM325NOPB | National Semiconductor Corporation | IC VOL REF Shunt Fixed 2.5V 15mA �0.2% SOT-23-3 RoHS : Compliant | 325 | |||
QS3257S1G8![]() | Integrated Device Technology Inc | HIGH-SPEED CMOS LVTTL-COMPATIBLE QUAD 2:1 MULTIPLEXER/DEMULTIPLEXER Multiplexer/Demultiplexer RoHS : Compliant | 95 | |||
![]() GLYN GmbH & Co. KG | IS43LQ32512A-046BLI-TR | Integrated Silicon Solution Inc | mobile LPDDR4/LPDDR4X, 16Gb, 512Mx32, 2133MHz, 1.0 | 5,000 | ||
![]() Interstate Connecting Components | 1-967325-1 | TE Connectivity | 2,5MM BU-GEH 4P RoHS : Compliant |
| 379 | |
| 1-2325807-2 | TE Connectivity | LUMAWISE Z45 LED HOLDER 19X19, COUNTERSUNK SCREW RoHS : Compliant |
| 175 | ||
| 202C632-51-0-CS5325 | TE Connectivity | 151981-000 |
| 0 | ||
| 2232532-5 | TE Connectivity | 5P, PL RAST 5 TAB HEADER, TH,V RoHS : Compliant |
| 0 | ||
| 1-2232532-5 | TE Connectivity | 5P, PL RAST 5 TAB HEADER, TH,V RoHS : Compliant |
| 0 | ||
| 202C632-50-0-CS5325 | TE Connectivity |
| 0 | |||
| ACC02E32-5P & ACC02E32-5P | Amphenol Industrial Operations | 0 | ||||
| T3033253250-000 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 202G632-55-0-CS5325 | TE Connectivity | 202G632-55-0-CS5325 | 0 | |||
| MWDM2L-100PBRR3-.250 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-37S-4C3-.250M-4 | Glenair Inc | 0 | ||||
| 1-1614532-5 | TE Connectivity | RN 0805 33K 0.1% 10PPM 5K RL RoHS : Not Compliant |
| 0 | ||
| 1-2176325-9 | TE Connectivity | CRGP 0402 330R 1% RoHS : Compliant |
| 0 | ||
| 1-2232532-4 | TE Connectivity | 4P PL RAST 5 Tab Header THVertical RoHS : Compliant |
| 0 | ||
| 2-1803257-2 | TE Connectivity | ANVIL, COMBINATION END FEED RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | ACS04E32-5SX-003 | Amphenol Corporation |
| 59 | ||
| ACS03A32-5P-003 | Amphenol Corporation |
| 0 | |||
| ACS05A32-5PZ-003 | Amphenol Corporation |
| 0 | |||
| ACS06AF32-5PY-003 | Amphenol Corporation |
| 0 | |||
| ACS08AD32-52S-003 | Amphenol Corporation |
| 0 | |||
| 8LT325B44SA | SOURIAU-SUNBANK |
| 0 | |||
| 8LT325B61SB | SOURIAU-SUNBANK |
| 0 | |||
| 8LT325F07SN251 | SOURIAU-SUNBANK |
| 0 | |||
| 8LT325F43SN-LC | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | ||
| 8LT325Z04PD | SOURIAU-SUNBANK |
| 0 | |||
| 8LT325Z43PA | SOURIAU-SUNBANK |
| 0 | |||
| ACC00A32-5PW-003 | Amphenol Corporation |
| 0 | |||
| ACC00A32-5SX-003-LC | Amphenol Corporation |
| 0 | |||
| ACC00AD32-5RY-003 | Amphenol Corporation |
| 0 | |||
| ACC00AF32-5SZ-003 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 1-2232532-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 323 | |
| 1-2232532-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 265 | ||
| 93696-325LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 135 | ||
| MPRLS0325YGN3251A | Honeywell Sensing and Control | Sensor |
| 79 | ||
| ACS04E32-5SX-003 | Amphenol Corporation | CONNECTOR |
| 39 | ||
| 88-443250-26F | Amphenol Corporation | PLUG |
| 36 | ||
| 1-967325-1 | TE Connectivity | Connectors RoHS : Compliant |
| 22 | ||
| 88-443254-04F | Amphenol Corporation | PLUG |
| 16 | ||
| 871325-1 | TE Connectivity | Connectors |
| 13 | ||
| 88-443250-35Z | Amphenol Corporation | PLUG |
| 8 | ||
| 88-443251-35E | Amphenol Corporation | PLUG |
| 4 | ||
| 9-1393254-6 | TE Connectivity | Circuit Breakers RoHS : Compliant |
| 3 | ||
| 87-443252-41P | Amphenol Corporation | PLUG |
| 3 | ||
| 202G632-55-0-CS5325 | TE Connectivity | Blow Molded Parts |
| 1 | ||
| ACC01E32-52P-003-B30-LC | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() PUI | 12.87325 | 3,603 | ||||
| 12.60325 | 3,280 | |||||
| 353250 | 2,777 | |||||
| 12.94325 | 2,005 | |||||
| ANE-325A | 890 | |||||
| 2016-2X15G00R/3.2/5.8U-2P | 539 | |||||
| 2016-2X06G00R/3.2/5.8U-2P | 104 | |||||
| ANF-325A | 30 | |||||
| 0313.250VXP | 5 | |||||
| 353250-BP | 2 | |||||
![]() Richardson RFPD | R143257460 | Radiall | RF COAX PNL MT CONN |
| 0 | |
| R573003325 | Radiall | RF Switch SP3T 0MHz to 3GHz 80dB |
| 0 | ||
| R585F32500 | Radiall | RF Switch DP3T 0MHz to 26.5GHz 55dB RoHS : Not Compliant |
| 0 | ||
| 554MM000325DG | Skyworks Solutions Inc | Oscillator VCXO 622.08MHz/ 644.53125MHz/ 693.48299 RoHS : Compliant |
| 0 | ||
| 554MM000325DGR | Skyworks Solutions Inc | Oscillator VCXO 622.08MHz/ 644.53125MHz/ 693.48299 RoHS : Compliant |
| 0 | ||
| ATS-51325R-C1-R0 | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Spread Clip Aluminum 2.66C/W RoHS : Compliant |
| 0 | ||
| SI5332AD09325-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT A RoHS : Compliant | 0 | |||
| SI5334H-B00325-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338F-B03250-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| LTC1325CSW#PBF | Analog Devices Inc | Battery Charger Lead-Acid/Li-Ion/NiCd/NiMH 3.072V RoHS : Compliant |
| 0 | ||
| LTC2325CUKG-14#TRPBF | Analog Devices Inc | 4-Channel Quad ADC SAR 5Msps 14-bit Serial (SPI)/L RoHS : Compliant |
| 0 | ||
| LTC2325IUKG-16#PBF | Analog Devices Inc | 4-Channel Quad ADC SAR 5Msps 16-bit Serial (SPI)/L RoHS : Compliant |
| 0 | ||
| LTC3252EDE#PBF | Analog Devices Inc | Charge Pump STPDN 0.9V to 1.6V/0.9V to 1.6V 250mA/ RoHS : Compliant | 0 | |||
| OK3325E-R52 | Ohmite Mfg Co | Res Carbon Film 3.3K Ohm 5% 0.25W(1/4W) -450ppm/C RoHS : Compliant |
| 0 | ||
| CMFA12S43-250 | Wall Industries Inc | Single OutputChassis Mount DC/DCConverter | 0 | |||
![]() Rutronik | RC0805FR-1325R5L | YAGEO Corporation | RC0805 25,5R 1% 0,125W TK100 RoHS : Compliant |
| 2,660,000 | |
| CR32-56R2-FY | ASJ Holdings Limited | RC1206 56,2R 1% 0,25W TK100 RoHS : Compliant |
| 420,000 | ||
| CR32-5600-FL | ASJ Holdings Limited | RC1206 560R 1% 0,25W TK100 RoHS : Compliant |
| 100,000 | ||
| CR32-510-JY | ASJ Holdings Limited | RC1206 51R 5% 0,25W TK100 RoHS : Compliant |
| 80,000 | ||
| CR32-561-JL | ASJ Holdings Limited | RC1206 560R 5% 0,25W TK100 RoHS : Compliant |
| 80,000 | ||
| CR32-56R0-FL | ASJ Holdings Limited | RC1206 56R 1% 0,25W TK100 RoHS : Compliant |
| 70,000 | ||
| CR32-563-JL | ASJ Holdings Limited | RC1206 56K 5% 0,25W TK100 RoHS : Compliant |
| 40,000 | ||
| 878325622 | Molex | 14P MILLI-GRID HEADER SMT GOLD RoHS : Compliant |
| 26,000 | ||
| AC1206FR-13255KL | YAGEO Corporation | AC1206 255K 1% 0,25W AUTOMO RoHS : Compliant |
| 20,000 | ||
| CR32-5R10-FL | ASJ Holdings Limited | RC1206 5,1R 1% 0,25W TK200 RoHS : Compliant |
| 15,000 | ||
| CR32-5101-FL | ASJ Holdings Limited | RC1206 5,1K 1% 0,25W TK100 RoHS : Compliant |
| 15,000 | ||
| CR32-5621-FL | ASJ Holdings Limited | RC1206 5,62K 1% 0,25W TK100 RoHS : Compliant |
| 10,000 | ||
| 532530270 | Molex | 02P HEADER 2,00MM STRAIGHT RoHS : Compliant |
| 8,000 | ||
| CR32-5603-FL | ASJ Holdings Limited | RC1206 560K 1% 0,25W TK100 RoHS : Compliant |
| 5,000 | ||
| CR2325.SC2 | Renata Batteries | LITH 3V 190MAH Secured Card 2pcs |
| 200 | ||
![]() Chip 1 Exchange | 1-967325-1 | TE Connectivity | INSTOCK RoHS : Compliant | 93,281 | ||
| B32592-S3105-K196 | INSTOCK | 6,150 | ||||
| 53253-0570 | Molex | INSTOCK RoHS : Compliant | 6,006 | |||
REF3325AIDBZR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 6,000 | |||
| CR32-5621-FL | ASJ Holdings Limited | INSTOCK RoHS : Compliant | 4,660 | |||
| B32522C1225K189 | INSTOCK | 2,947 | ||||
| B32511-J1155-K189 | TDK Corporation | INSTOCK RoHS : Compliant | 2,806 | |||
| B32562-J3105-K | INSTOCK | 1,200 | ||||
| CE UMK325 F475ZH-T | TAIYO YUDEN | INSTOCK | 1,000 | |||
| M4A3-643255VC48 | INSTOCK | 500 | ||||
| PIC16LF15325T-E/JQ | Microchip Technology Inc | INSTOCK | 300 | |||
| B32523Q3225K000 | TDK Electronics | INSTOCK RoHS : Compliant | 101 | |||
| 878325623 | Molex | INSTOCK RoHS : Compliant | 94 | |||
| EPM3256ATC14410 | Altera Corporation | INSTOCK | 16 | |||
| B32524Q3475K | TDK Electronics | INSTOCK | 2 | |||
![]() Braemac Americas-Symmetry | EB3250JA12-12.000M TR | Abracon Corporation | CRYSTAL, SMD, AUTOMOTIVE AEC-Q200, 5.0x3.2, 4 PAD, 15/30, 12pF, 12.000MHz, -40+85C |
| 0 | |
| ABM3-25.000MHZ-J2Y-T | Abracon Corporation | CRYSTAL 25.000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| ISM95-3251AH-1.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM97-3251AH-16.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM97-3251AH-25.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM97-3251AH-33.333MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| EB3250YA12-10.000M TR | Abracon Corporation | CRYSTAL, SMD, AUTOMOTIVE AEC-Q200, 5.0x3.2, 4 PAD, 30/50, 12pF, 10.000MHz, -40+125C |
| 0 | ||
| ASFL3-25.000MHZ-LRS-T | Abracon Corporation | XTAL OSC XO 25.000MHZ HCMOS TTL RoHS : Compliant |
| 0 | ||
| EB3250YA12-24.000M TR | Abracon Corporation | CRYSTAL, SMD, AUTOMOTIVE AEC-Q200, 5.0x3.2, 4 PAD, 30/50, 12pF, 24.000MHz, -40+125C |
| 0 | ||
| ISM92-3251BH-33.333 MHZ | Abracon Corporation |
| 0 | |||
| ISM95-3251AH-10.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM95-3251AH-3.6864MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ATCA-03-250M-V![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM92-3251AH-24.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ISM95-3251AH-32.000MHZ | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Maritex | 1053251002![]() | Molex | Connectors Accessories; 1053251002; MOLEX; Black; Yes; 2 RoHS : Compliant |
| 9,804 | |
| 1053252002 | Molex | Connectors Accessories; 1053252002; MOLEX; Natural; Yes; 2 RoHS : Compliant |
| 3,787 | ||
TLV71325PDQNR![]() | Texas Instruments | LDO Regulators; TLV71325PDQNR; TEXAS INSTRUMENTS; 4; 1; 150 mA; 2.5 V RoHS : Compliant |
| 3,000 | ||
| TC0325B7501T5E | Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 0603; 75K; 0.1%; 1/16W RoHS : Compliant |
| 2,900 | ||
| B32529C0472J289 | TDK Corporation | Film Capacitors; B32529C0472J289; TDK RoHS : Compliant |
| 2,084 | ||
| 1-967325-3 | TE Connectivity | Automotive Connectors; 1-967325-3; TE CONNECTIVITY; Black; 2; No; 30.988 mm RoHS : Compliant |
| 1,183 | ||
| CF453232-560K | Prosperity Dielectrics Co Ltd | Inductor; SMD; 56uH; 0.135A; 5.5R; 1812; 10% |
| 958 | ||
| 1053252007 | Molex | Connectors Accessories; 1053252007; MOLEX; Yes RoHS : Compliant |
| 944 | ||
| 1-967325-2 | TE Connectivity | Automotive Connectors; 1-967325-2; TE CONNECTIVITY; Black; 3; No; 30.988 mm RoHS : Compliant |
| 853 | ||
| CF453232-5R6K | Prosperity Dielectrics Co Ltd | Inductor; SMD; 5.6uH; 0.3A; 1.1R; 1812; 10% |
| 709 | ||
| 103-25SMB2 BLUE | Xinya Electronics Co Ltd | D-Sub Connector; female; male; without thread; 25 contacts |
| 608 | ||
| 1-968325-3 | TE Connectivity | Automotive Connectors; 1-968325-3; TE CONNECTIVITY; Black; 52; Yes RoHS : Compliant |
| 500 | ||
| 1-967325-1 | TE Connectivity | Automotive Connectors; 1-967325-1; TE CONNECTIVITY; Black; 4; No; 30.988 mm RoHS : Compliant |
| 222 | ||
| 103-25PMB1 BLUE | Xinya Electronics Co Ltd | D-Sub Connector; male; with thread; 25 contacts |
| 177 | ||
| 1473250-1 | TE Connectivity | Automotive Connectors; 1473250-1; TE CONNECTIVITY; Black; 81; 76 mm RoHS : Compliant |
| 19 | ||
![]() Pasternack Enterprises US | PE33253/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Right Angle Cable Using RG142 Coax with HeatShrink., Radio frequency assembly N male right angle to BNC male right angle cable using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to BNC male right angle cable using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type N cable connection on one end and a right angle BNC cable connection on the other. Our right angle type N to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE33253/HS can also be known as a right angle type N plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33253/HS RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle type N male to right angle BNC male cable has a maximum VSWR of 1.4:1. Type N plug to BNC plug cable assembly PE33253/HS is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33253/HS can also be used in the other direction and will be a right angle BNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to BNC RF cable assembly as per your requirements. | 10,110 | ||
| PE33253LF/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male Right Angle to N Male Right Angle Cable 60 Inch Length Using RG142 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male right angle to N male right angle cable 60 inch length using RG142 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to N male right angle cable 60 inch length using RG142 coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle type N cable connection on the other. Our right angle BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE33253LF/HS-60 can also be known as a right angle BNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to N type plug cable assembly PE33253LF/HS-60 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33253LF/HS-60 can also be used in the other direction and will be right angle type N male to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to N male right angle cable 60 inch length using RG142 coax with heatshrink, LF solder. |
| 2,022 | ||
| PE3FCA283-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC UPC to ST UPC, OM1 Multimode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Orange-25M. Pasternack’s PE3FCA283-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 6-fiber cable assembly is equipped with SC/UPC to ST/UPC connectors. Our orange fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA283-25M fiber optic cable with a 5 mm cable diameter and 50 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 47 | ||
| PE3FCA325-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 5.6mm Plenum, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA325-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 8-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA325-10M fiber optic cable with a 5.6 mm cable diameter and 56 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 42 | ||
| PE3C3250-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to N Female Low Loss Test Cable 60 Inch Length Using PE-P300LL Coax., Radio frequency assembly SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our low loss test right angle SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3250-60, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3250-60 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3250-60 can also be used in the other direction and will be N type female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female low loss test cable 60 inch length using PE-P300LL coax. |
| 0 | ||
| PE3C3255-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male to N Female Bulkhead Cable 100 CM Length Using PE-P141 Coax., Radio frequency assembly N male to N female bulkhead cable 100 cm length using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 100 cm length using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C3255-100CM, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C3255-100CM is built with PE-P141 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3255-100CM can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 100 cm length using PE-P141 coax. |
| 0 | ||
| PE3W08325-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Female 4 Hole Flange to BNC Female 4 Hole Flange Cable 150 cm Using PE-SR047AL Coax., Radio frequency assembly SMA female 4 hole flange to BNC female 4 hole flange cable 150 cm using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to BNC female 4 hole flange cable 150 cm using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and BNC 4 hole flange cable connection on the other. Our SMA to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMA to BNC cable is a female to female coax assembly, PE3W08325-150CM, can also be known as a SMA jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA jack to BNC jack cable assembly PE3W08325-150CM is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SMA female 4 hole flange to BNC female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08325-150CM can also be used in the other direction and will be BNC female 4 hole flange to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to BNC jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to BNC female 4 hole flange cable 150 cm using PE-SR047AL coax. |
| 0 | ||
| PE3W12325LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug Right Angle to 75 Ohm TNC Male Cable Using 75 Ohm RG59 Coax, LF Solder. PE3W12325LF is a SMB plug right angle to TNC male cable using RG59 coax. This Pasternack SMB plug right angle to TNC male cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm TNC for connector 2. SMB right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male TNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W12325LF SMB plug right angle to TNC male cable assembly is constructed with RG59 coax. | 0 | |||
| PE3259-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Male Right Angle Cable 12 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 12 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 12 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3259-12, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3259-12 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 12 inch length using PE-SR047AL coax. |
| 0 | ||
| PE3253-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Female Cable 48 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male to SMA female cable 48 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 48 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3253-48, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3253-48 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3253-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 48 inch length using PE-SR047AL coax. |
| 0 | ||
| PE3259-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to SMA Male Right Angle Cable 60 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 60 inch length using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 60 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3259-60, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3259-60 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 60 inch length using PE-SR047AL coax. |
| 0 | ||
| PE3C3250-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. SMA Male Right Angle to N Female Low Loss Test Cable 50 cm Length Using PE-P300LL Coax., Radio frequency assembly SMA male right angle to N female low loss test cable 50 cm length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female low loss test cable 50 cm length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our low loss test right angle SMA to N type cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3250-50CM, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3250-50CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3250-50CM can also be used in the other direction and will be type N female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female low loss test cable 50 cm length using PE-P300LL coax. |
| 0 | ||
| PE3C3252-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to N Female Low Loss Test Cable 100 cm Length Using PE-P300LL Coax, RoHS., Radio frequency assembly SMA male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss test SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3252-100CM, can also be known as a low loss test SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3252-100CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3252-100CM can also be used in the other direction and will be N type female to SMA male cable assembly if the opposite connectivity is required. Low loss test SMA plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS. |
| 0 | ||
| PE3C7832-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. 4.3-10 Male Right Angle to 4.3-10 Female Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male right angle to 4.3-10 female low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to 4.3-10 female low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM right angle 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to 4.3-10 cable is a male to female coax assembly, PE3C7832-50CM, can also be known as a low PIM right angle 4.3-10 plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 jack cable assembly PE3C7832-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.3-10 right angle male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7832-50CM can also be used in the other direction and will be 4.3-10 female to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to 4.3-10 female low PIM cable 50 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W08325-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female 4 Hole Flange to BNC Female 4 Hole Flange Cable 36 Inch Using PE-SR047AL Coax., Radio frequency assembly SMA female 4 hole flange to BNC female 4 hole flange cable 36 inch using PE-SR047AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to BNC female 4 hole flange cable 36 inch using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and BNC 4 hole flange cable connection on the other. Our SMA to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMA to BNC cable is a female to female coax assembly, PE3W08325-36, can also be known as a SMA jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA jack to BNC jack cable assembly PE3W08325-36 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SMA female 4 hole flange to BNC female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08325-36 can also be used in the other direction and will be BNC female 4 hole flange to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to BNC jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to BNC female 4 hole flange cable 36 inch using PE-SR047AL coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-9325301BDA![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9325001M2A![]() | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND RoHS : Not Compliant | 0 | |||
5962-9325301BCA![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/32501BRA | Teledyne HiRel | 8-BIT REGISTER WITH CLEAR | 0 | |||
| 5962-9325001MRA | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND RoHS : Not Compliant | 0 | |||
| 5962-9325001MSA | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUTPUTS AND RoHS : Not Compliant | 0 | |||
5962-9325301B2A![]() | Teledyne HiRel | BUFFER, QUAD, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | HMCR0402-16W-2325FT | VENKEL LTD | High Value CR;0402;1/16W;23.2M;�1% RoHS : Compliant | 10,000 | ||
| FBC0603-250P | VENKEL LTD | High Current Ferrite Bead;0603;25R RoHS : Compliant | 0 | |||
| FBM0603-252P | VENKEL LTD | Multi-Layer Ferrite Bead;0603;2.5K RoHS : Compliant | 0 | |||
![]() Vyrian | MAX7325AEG/V+T | Analog Devices Inc | Parallel I/O Port, 8 I/O, BICMOS, PDSO24 RoHS : Compliant | 11,444 | ||
AD5623RBCPZ-3250R7![]() | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time RoHS : Compliant | 10,335 | |||
74CBTLV3257DGVRE4![]() | Texas Instruments | Bus Exchanger, CBTLV/3B Series, 1-Func, 4-Bit, True Output, CMOS, PDSO16 RoHS : Compliant | 9,074 | |||
| 60-00325-09 | Broadcom Limited | 8,481 | ||||
| MAX32552-LNSSC-T | Analog Devices (Maxim Integrated) | 7,604 | ||||
| MAX325CUA+ | Analog Devices Inc | SPST, 2 Func, 1 Channel, CMOS, PDSO8 RoHS : Compliant | 7,381 | |||
| MAX32570-QNS | Analog Devices (Maxim Integrated) | 7,362 | ||||
| PTPA3255TDDVQ1 | Texas Instruments | Audio Amplifier, 148W, 4 Channel(s), 1 Func, PDSO44 | 7,084 | |||
74CB3Q3251DGVRE4![]() | Texas Instruments | Multiplexer And Demux/Decoder, CB3Q/3VH/3C/2B Series, 1-Func, 1 Line Input, 8 Line Output, True Output, CMOS, PDSO16 RoHS : Compliant | 6,663 | |||
| 5962R1325001VHA | Analog Devices Inc | Operational Amplifier, 2 Func, 950uV Offset-Max, CDFP10 RoHS : Not Compliant | 6,626 | |||
| MAX32561-LNJ+# | Analog Devices Inc | RISC Microcontroller RoHS : Compliant | 6,104 | |||
MAX325CSA-T![]() | Maxim Integrated Products | SPST, 2 Func, 1 Channel, CMOS, PDSO8 RoHS : Not Compliant | 5,743 | |||
| PIC16F18325T-E/STVAO | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO14 RoHS : Compliant | 4,699 | |||
| 90325-9016 | Molex | Board Connector, 16 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Compliant | 3,924 | |||
| PMP5832.5 | Texas Instruments | 3,450 | ||||
![]() Waytek, Inc. | 643251023 | Molex | CMC Plug CP 1.5 RoHS : Compliant |
| 18,324 | |
| S325SSG8 | UMPCO Inc | 1/2" Stainless Cable Clamp 1/2 inch wide Partially cushioned |
| 13,319 | ||
| 643251091 | Molex | CMC Plug CP 2.8 |
| 9,304 | ||
| S325G32 | UMPCO Inc | 2" Plated Steel Cable Clamp 1/2 inch wide Partially cushioned |
| 6,390 | ||
| S732-5B8G16 | UMPCO Inc | 1" Fully Cushioned Clamp 1/2 inch wide, metal |
| 1,756 | ||
| S325DKG10 | UMPCO Inc | 5/8" Aluminum Cable Clamp 1/2 inch wide Partially cushioned |
| 1,462 | ||
| S325SSG12 | UMPCO Inc | 3/4" Stainless Cable Clamp 1/2 inch wide Partially cushioned |
| 1,275 | ||
| S325DKG24 | UMPCO Inc | 1-1/2" Aluminum Cable Clamp 1/2 inch wide Partially cushioned |
| 1,207 | ||
| S325SSG40 | UMPCO Inc | 2-1/2" Stainless Cable Clamp 1/2 inch wide Partially cushioned |
| 870 | ||
| S325DKG20 | UMPCO Inc | 1-1/4" Aluminum Cable Clamp 1/2 inch wide Partially cushioned |
| 856 | ||
| 15544325 | Aptiv PLC | HES Circular Connector 31 Pin DRESS RECEPTACLE MALE BLUE HDP24-24-31PE-L017 REPL 38792 |
| 282 | ||
| 53252-3 | Grote Industries Inc | Red Stop-Tail-Turn LED Light 4" Round 10 LED 12V .24V US 40 GROTE 53252-3 |
| 26 | ||
| ANL-325 | Eaton Electronics | 325A Limiter ANL Low Voltage Non-Time-Delay Fuse |
| 1 | ||
| S325G12 | UMPCO Inc | 3/4" Plated Steel Cable Clamp 1/2 inch wide Partially cushioned |
| 0 | ||
| S732-5B8G14 | UMPCO Inc | 7/8" Fully Cushioned Clamp 1/2 inch wide, metal |
| 0 | ||
![]() Win Source Electronics | EMK325BJ226KM-T![]() | TAIYO YUDEN | CAP CER 22UF 16V X5R 1210 / Cap Ceramic 22uF 16V X5R 10% Pad SMD 1210 85°C T/R RoHS : Compliant |
| 240,000 | |
SN74CBTLV3257RSVR![]() | Texas Instruments | IC 4BIT 1-4 FET MUX/DEMUX 16UQFN RoHS : Compliant |
| 89,973 | ||
LM4050CEM3-2.5![]() | Texas Instruments | LM4050/LM4050Q Precision Micropower Shunt Voltage Reference | IC VREF SHUNT 2.5V SOT23-3 RoHS : Not Compliant |
| 60,000 | ||
REF3325AIDCKR![]() | Texas Instruments | IC VREF SERIES 2.5V SC70 RoHS : Compliant |
| 55,273 | ||
MAX13256ATB+![]() | Maxim Integrated Products | 36V H-BRIDGE TRANSFORMER DRIVER RoHS : Compliant |
| 37,500 | ||
REF3325AIDBZR![]() | Texas Instruments | IC VREF SERIES 2.5V SOT23-3 RoHS : Compliant |
| 30,000 | ||
| SI2325DS-T1-GE3 | Vishay Huntington | MOSFET P-CH 150V 0.53A SOT-23 |
| 29,094 | ||
| 0532530270 | Molex | CONN HEADER VERT 2POS 2MM RoHS : Compliant |
| 24,620 | ||
SN74CBTLV3253DBQR![]() | Texas Instruments | IC LV DUAL FET MUX/DEMUX 16SSOP RoHS : Compliant |
| 9,100 | ||
MAX3250EAI+![]() | Maxim Integrated Products | Dual Transmitter/Receiver RS-232 28-Pin SSOP / IC TXRX RS-232 250KBPS 28-SSOP RoHS : Compliant |
| 6,000 | ||
NC7SB3257P6X![]() | Fairchild Semiconductor Corporation | IC MUX/DEMUX BUS SW 2:1 SC70-6 RoHS : Compliant |
| 6,000 | ||
| XC7A12T-1CSG325C | AMD | IC FPGA 150 I/O 324CSBGA / Artix-7 Field Programmable Gate Array (FPGA) IC 150 737280 12800 324-LFBGA, CSPBGA RoHS : Compliant |
| 3,000 | ||
| LTC2325IUKG-16#PBF | Analog Devices Inc | IC ADC 16BIT SAR 52QFN RoHS : Compliant |
| 885 | ||
EPM3256AQI208-10N![]() | Altera Corporation | IC CPLD 256MC 10NS 208QFP RoHS : Compliant |
| 839 | ||
AT32UC3A3256-CTUR![]() | Atmel Corporation | IC MCU 32BIT 256KB FLASH 144BGA RoHS : Compliant |
| 310 | ||
![]() Wuhan P&S | 74FST3257MNTWG![]() | onsemi | Quad 2:1 Multiplexer/Demultiplexer (Mux/Demux) Bus Switch RoHS : Compliant |
| 234,000 |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |