| Revenda | Nome de Peças | Fabricante Electrônico | Descrição Electrónicos | Price | Qty.
BuyNow |
ECCO | 97-55-271-12
| Amphenol Industrial Operations | | | 150
 |
97-55-271-12
| Amphenol Industrial Operations | | | 150
|
97-55-271-16
| Amphenol Industrial Operations | | | 50
|
10-765127-1901
| Amphenol Industrial Operations | | | 11
|
MS24656-271
| OTTO Engineering Inc |
RoHS : Compliant | | 1
|
Pasternack Enterprises US | PE3W08127-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. MMCX Plug Right Angle to MCX Plug Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug right angle to MCX plug right angle cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MCX plug right angle cable 18 inch length using PE-SR405FLJ coax, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MCX cable connection on the other. Our right angle MMCX to right angle MCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W08127-18 can also be known as a right angle MMCX male to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MCX male cable assembly PE3W08127-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08127-18 can also be used in the other direction and will be right angle MCX plug to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MCX plug right angle cable 18 inch length using PE-SR405FLJ coax. | 1 : $87.99
25 : $83.59
50 : $79.19
100 : $75.67
|
| 1,344
|
PE38271-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. QMA Male to QMA Male Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly QMA male to QMA male cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to QMA male cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and QMA cable connection on the other. Our QMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE38271-24, can also be known as a QMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE38271-24 is built with RG58 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency QMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. QMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male cable 24 inch length using RG58 coax. | 1 : $96.99
25 : $92.14
50 : $87.29
100 : $83.41
|
| 404
|
PE3271LF-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to Mini UHF Male Cable 60 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly SMA male to mini UHF male cable 60 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to mini UHF male cable 60 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and mini UHF cable connection on the other. Our SMA to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This SMA to mini UHF cable is a male to male coax assembly, PE3271LF-60, can also be known as a SMA plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. SMA plug to mini UHF plug cable assembly PE3271LF-60 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to mini UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3271LF-60 can also be used in the other direction and will be mini UHF male to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to mini UHF cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to mini UHF male cable 60 inch length using RG223 coax, RoHS. | 1 : $70.99
25 : $67.44
50 : $63.89
100 : $61.05
|
| 350
|
PE3C10271-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to N male low loss cable 24 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to N male low loss cable 24 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss a BNC to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10271-24 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10271-24 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to type N plug cable assembly PE3C10271-24 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10271-24 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $94.99
10 : $93.09
25 : $91.19
100 : $89.29
|
| 95
|
PE3FCA127-1M
| Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC APC to ST UPC, SM OS2, 2.0mm Riser, Yellow-1M. Pasternack’s PE3FCA127-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex SC/APC to ST/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA127-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. | 1 : $21.9945
5 : $21.11
10 : $20.23
25 : $19.36
|
| 87
|
PE34271LF-60
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. TNC Male to TNC Male Cable 60 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly TNC male to TNC male cable 60 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 60 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE34271LF-60, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE34271LF-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 60 inch length using RG401 coax, RoHS. | 1 : $371.99
25 : $353.39
50 : $334.79
|
| 12
|
PE3W02715/HS-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to N Male Low Loss Cable 60 Inch Length Using LMR-200 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly BNC male to N male low loss cable 60 inch length using LMR-200 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to N male low loss cable 60 inch length using LMR-200 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type N cable connection on the other. Our low loss BNC to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W02715/HS-60 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3W02715/HS-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02715/HS-60 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male low loss cable 60 inch length using LMR-200 coax with Times Microwave components with heatshrink. | 1 : $98.99
25 : $94.04
50 : $89.09
100 : $85.13
|
| 0
|
PE3C1271-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male right angle to TNC male right angle low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to TNC male right angle low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3C1271-200CM, can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1271-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1271-200CM can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 200 cm length using PE-P142LL coax, RoHS. | 1 : $655.0
25 : $622.25
50 : $589.5
|
| 0
|
PE3C2716LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using LMR-195 Coax with HeatShrink, LF Solder, RoHS. PE3C2716LF/HS is a N male to SMA male right angle cable using LMR-195 coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2716LF/HS N male to SMA male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3M0127-100CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned SMA Male to SMA Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA male to SMA female bulkhead low loss cable 100 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0127-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to SMA cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and SMA connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly. PE3M0127-100CM can also be known as a temperature conditioned low loss SMA plug to SMA jack cable assembly and will be shipped the same day after it is purchased. SMA plug to SMA jack cable assembly PE3M0127-100CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA male to SMA female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0127-100CM can be used in the other direction and will be SMA female to SMA male cable assembly. Pasternack high reliability low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for same-day shipment worldwide. Variations of PE44826 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA male to SMA female bulkhead low loss cable 100 cm length using PE-P142LL coax. | 1 : $750.0
25 : $712.5
50 : $675.0
100 : $645.0
|
| 0
|
PE3W08271-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to SHV Jack Bulkhead Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly N male to SHV jack bulkhead cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SHV jack bulkhead cable 12 inch length using RG223 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and SHV bulkhead cable connection on the other. Our N type to SHV cable assemblies have a male gender on end 1 and jack on end 2. PE3W08271-12 can also be known as a type N plug to SHV female cable assembly and will be shipped same-day as it is purchased. N type plug to SHV female cable assembly PE3W08271-12 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SHV cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08271-12 can also be used in the other direction and will be SHV jack bulkhead to N type male cable assembly if the opposite connectivity is required. Type N plug to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SHV cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SHV jack bulkhead cable 12 inch length using RG223 coax. | 1 : $165.99
25 : $157.69
50 : $149.39
100 : $142.75
|
| 0
|
PE3W12713
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity N Male to Reverse Polarity SMA Male Cable Using LMR-400-UF Coax. PE3W12713 is a reverse polarity N male to reverse polarity SMA male cable using LMR-400-UF coax. This Pasternack reverse polarity N male to reverse polarity SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity male N to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12713 N reverse polarity male to SMA reverse polarity male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W22271
| Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 3.5mm Male to 3.5mm Female Bulkhead Cable Using RG405 Coax. PE3W22271 is a 3.5mm male to 3.5mm female bulkhead cable using RG405 coax. This Pasternack 3.5mm male to 3.5mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male 3.5mm to female 3.5mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22271 3.5mm male to 3.5mm female bulkhead cable assembly is constructed with RG405 coax. | | 0
|
PE3W02716LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to QMA Male Right Angle Cable Using RG316-DS Coax, LF Solder. PE3W02716LF is a QMA male right angle to QMA male right angle cable using RG316-DS coax. This Pasternack QMA male right angle to QMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. QMA right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA right angle to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02716LF QMA male right angle to QMA male right angle cable assembly is constructed with RG316-DS coax. | | 0
|
PE3W13271/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW240, RF Cable Type: LMR-LW240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-LW240 Coax with HeatShrink. PE3W13271/HS is a SMA male to SMA male right angle cable using LMR-LW240 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13271/HS SMA male to SMA male right angle cable assembly is constructed with LMR-LW240 coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
TE Connectivity | 62718-1
| TE Connectivity | 250 FASTON FLAG REC 22-18 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62718-1 | Internal Number: 62718-1 | TE Connectivity
RoHS : Compliant | 1,000 : $0.11
100 : $0.15
10 : $0.18
1 : $0.24
|
| 71,793
|
62718-2
| TE Connectivity | 250 FASTON FLAG REC 22-18 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62718-2 | Internal Number: 62718-2 | TE Connectivity
RoHS : Compliant | 1,000 : $0.12
100 : $0.16
10 : $0.2
1 : $0.26
|
| 64,557
|
640271-3
| TE Connectivity | RING 22-18 AWG TPST Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 18 AWG Wire Size: .3 – .8 mm² Wire Size: 640 – 1624 CMA Stud Size: #10 Closed Ring Tongue Terminal 22 – 18 AWG .3 – .8 mm² 640 – 1624 CMA | Ring Terminal | Part Number: 640271-3 | Internal Number: 640271-3 | TE Connectivity
RoHS : Compliant | 1,000 : $0.18
100 : $0.24
10 : $0.29
1 : $0.39
|
| 57,500
|
MV-254127-10-8A
| TE Connectivity | MV-254127-10-8A Primary Product Color: Matte Metalized Silver Label Type: Void & Tamper Evident Labels Label Style: Die-Cut Label Adhesive Type: Permanent Acrylic Adhesive Product Width: 25.4 mm Matte Metalized Silver Void & Tamper Evident Labels Die-Cut Permanent Acrylic Adhesive | Mv Tamper Evident Polyester Label | Part Number: MV-254127-10-8A | Internal Number: F54250-000 | Alias Number: 3-1200602-4 | 25.4 mm
RoHS : Compliant | 25,000 : $0.07
10,000 : $0.07
5,000 : $0.08
2,500 : $0.08
1,000 : $0.08
500 : $0.08
250 : $0.08
100 : $0.08
50 : $0.09
25 : $0.09
10 : $0.09
1 : $0.09
|
| 29,431
|
2373227-1
| TE Connectivity | CVTY PLUG,0.64 GENER. Y,CVTY DIA,MAT-SL Connector Seal & Plug Type: Cavity Plug Cavity Diameter: .64 mm Cavity Diameter: .025 in Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F Cavity Plug .64 mm | Connector Seal & Cavity Plug | Part Number: 2373227-1 | Internal Number: 2373227-1 | TE Connectivity
RoHS : Compliant | 20,000 : $0.26
10,000 : $0.32
5,000 : $0.43
2,000 : $0.58
1,000 : $0.86
100 : $1.04
|
| 14,071
|
1-2271457-4
| TE Connectivity | D3950 HDR 4POS 1ROW X KEY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | Header Assembly: Wire-To-Board Connector & Spring Clamp & 7.5 Mm Pitch & 14.5A | Part Number: 1-2271457-4 | Internal Number: 1-2271457-4 | D3950 HDR 4POS 1ROW X KEY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | Header Assembly: Wire-To-Board Connector & Spring Clamp & 7.5 Mm Pitch & 14.5A | Part# 1-2271457-4
RoHS : Compliant | 5,000 : $5.39
2,500 : $5.52
1,000 : $5.65
500 : $5.78
250 : $5.91
100 : $6.04
50 : $6.18
25 : $6.31
10 : $6.44
1 : $6.57
|
| 6,397
|
181271-2
| TE Connectivity | MOD 2 CONTACT REC. Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Size: 30 – 28 AWG Wire Size: .05 – .09 mm² Termination Method to Wire & Cable: Crimp Gold (Au) Socket 30 – 28 AWG .05 – .09 mm² | Connector Contact | Part Number: 181271-2 | Internal Number: 181271-2 | Alias Number: 1009629-F | TE Connectivity
RoHS : Compliant | 10,000 : $0.81
5,000 : $0.83
2,500 : $0.85
1,000 : $0.87
500 : $0.89
250 : $0.9
100 : $0.92
50 : $0.94
25 : $0.96
10 : $0.98
1 : $0.99
|
| 5,674
|
1217127-1
| TE Connectivity | 250 FASTON,PCB TAB,TPBR PCB Terminal Type: Tab Mating Tab Width: .25 in Mating Tab Width: 6.35 mm PCB Hole Diameter: 1.4 mm PCB Hole Diameter: .055 in Tab .25" 6.35 mm 1.4 mm | PCB Terminal | Part Number: 1217127-1 | Internal Number: 1217127-1 | .25" | TE Connectivity
RoHS : Compliant | 1,000 : $0.16
100 : $0.21
25 : $0.31
10 : $0.35
1 : $0.39
|
| 5,012
|
172127-1
| TE Connectivity | FF 250 PLUG HSG 1P NYLON NAT Terminal Type: Tab Number of Positions: 1 Terminal Orientation: Straight Primary Product Color: Natural Connector & Housing Type: Tab Housing Tab 1 Straight Natural | Crimp Terminal Housing | Part Number: 172127-1 | Internal Number: 172127-1 | Alias Number: 0-0172127-1 | TE Connectivity
RoHS : Compliant | 1,000 : $0.36
100 : $0.49
10 : $0.6
1 : $0.76
|
| 3,567
|
202C642-71-0
| TE Connectivity | 202C642-71-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 71 Material Systems Code: 10 Heat Shrink Boot | Straight 202 71 | Part Number: 202C642-71-0 | Internal Number: 806089-000 | Alias Number: 9-1196230-2 | TE Connectivity
RoHS : Compliant | | 1,996
|
PT271012
| TE Connectivity | PT271012 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: PT271012 | Internal Number: 5-1419111-2 | TE Connectivity
RoHS : Compliant | 100 : $19.89
50 : $20.84
25 : $21.78
10 : $22.75
1 : $23.69
|
| 227
|
6-2271122-2
| TE Connectivity | M12, MALE, A CODE, R/A, 12P, PG9 (AU) Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Plug 12 20 | Standard Circular Connector | Part Number: 6-2271122-2 | Internal Number: 6-2271122-2 | TE Connectivity
RoHS : Compliant | 50 : $124.74
25 : $132.08
10 : $139.42
1 : $146.75
|
| 180
|
462A422-71-0
| TE Connectivity | 462A422-71-0 Molded Part Shape: Y Shape Number of Branches: 4 Material Code: 71 Material Systems Code: 10 Adhesive Requirement: Adhesive Purchased Separately Y Shape 4 71 10 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 462A422-71-0 | Internal Number: 820188-000 | Alias Number: 4-1196394-3 | TE Connectivity
RoHS : Compliant | | 75
|
T2111027101-000
| TE Connectivity | HMN-Q1-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 2 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 2 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027101-000 | Internal Number: T2111027101-000 | TE Connectivity
RoHS : Compliant | 50 : $14.05
25 : $14.88
10 : $15.71
1 : $16.54
|
| 36
|
5227161-6
| TE Connectivity | RTANG JK W/MTG PINS, BNC PCB RF Interface: BNC RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .572 in RF Connector Mated Outer Diameter (Approximate): 14.53 mm Impedance: 50 Ω BNC Jack .572" 14.53 mm | Coax Connector | Part Number: 5227161-6 | Internal Number: 5227161-6 | TE Connectivity
RoHS : Compliant | 50 : $3.12
10 : $3.59
1 : $4.22
|
| 3
|
Venkel Ltd. | C0603X7R500-271KNE
 | VENKEL LTD | Chip Capacitor;0603;X7R;50V;270pF;�10%
RoHS : Compliant | | 16,000
|
C0603C0G101-271FNP
| VENKEL LTD | Chip Capacitor;0603;C0G;100V;270pF;�1%
RoHS : Compliant | | 0
|
C0603C0G201-271KNP
| VENKEL LTD | HV Chip Capacitor;0603;C0G;200V;270pF;�10%
RoHS : Compliant | | 0
|
C1808X7R302-271KNE
| VENKEL LTD | HV Chip Capacitor;1808;X7R;3000V;270pF;�10%
RoHS : Compliant | | 0
|
C0603X7R500-271JNP
| VENKEL LTD | Chip Capacitor;0603;X7R;50V;270pF;�5%
RoHS : Compliant | | 0
|
C0805C0G601-271JNE
| VENKEL LTD | HV Chip Capacitor;0805;C0G;600V;270pF;�5%
RoHS : Compliant | | 0
|
C1111HQN201-271FNE
| VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;200V;270pF;�1%
RoHS : Compliant | | 0
|
C1206C0G102-271JNE
 | VENKEL LTD | HV Chip Capacitor;1206;C0G;1000V;270pF;�5%
RoHS : Compliant | | 0
|
C1206X7R101-271KNP
| VENKEL LTD | Chip Capacitor;1206;X7R;100V;270pF;�10%
RoHS : Compliant | | 0
|
MELFC0204-TE-1271DT
| VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.27K;�0.5%
RoHS : Compliant | | 0
|
MELFC0204-ZC-1271FT
| VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;1.27K;�1%
RoHS : Compliant | | 0
|
MELFC0204-ZE-1271BT
| VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.27K;�0.1%
RoHS : Compliant | | 0
|
MELFC0204-ZZ-1271CT
| VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�15PPM;1.27K;�0.25%
RoHS : Compliant | | 0
|
MELFC0207-XN-1271FT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;1.27K;�1%
RoHS : Compliant | | 0
|
MELFC0207-XP-1271BT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�5PPM;1.27K;�0.1%
RoHS : Compliant | | 0
|
Waytek, Inc. | 22710-00
| Eaton Electronics | 10 AMP Circuit Breaker Red Low Profile Blade Mount | 1 : $7.96
10 : $7.28
50 : $6.73
100 : $5.94
200 : $5.6
500 : $5.38
|
| 3,171
|
15327126
| Aptiv PLC | Ducon 9.5 Cable Seal 10 GA GXL/GPT | 10 : $0.275
50 : $0.22
100 : $0.209
200 : $0.187
500 : $0.187
1,000 : $0.176
|
| 2,760
|
7100164271
| 3M | 12-10 GA Male Disconnect .250 X .032 Yellow Heat Shrink (W) X (T) .250 x .032 | 10 : $1.7239
50 : $1.535
100 : $1.3933
200 : $1.3461
500 : $1.3047
1,000 : $1.2516
|
| 2,642
|
2713
| Heyco | Heyco 2713 locking hole plug is a snap-in panel plug designed to close unused 1.0" openings while providing a clean finished appearance. Its locking design supports secure retention, helps block dirt and debris, and improves panel protection in electrical and equipment enclosures.
RoHS : Compliant | 100 : $0.0847
200 : $0.0809
500 : $0.0777
1,000 : $0.0744
5,000 : $0.072
|
| 2,440
|
AL-27-100-SS-CT-C
| Advanced Cable Ties Inc | ACT AL-27-100-SS-CT-C 316 coated stainless steel cable tie is a corrosion-resistant metal tie with 150 lb. tensile strength for securing wire bundles, hoses, and tubing in harsh environments. Its coated stainless construction supports durable fastening where heat, moisture, chemicals, or vibration are present. | 100 : $2.5051
100 : $2.363
200 : $2.3097
500 : $2.2564
1,000 : $2.2209
|
| 1,000
|
12-711U
| Pollak | Black Coated Connector Bracket For 7-Pole RV Sockets | 4 : $3.034
50 : $2.5219
100 : $2.2018
200 : $2.0739
500 : $1.9841
|
| 269
|
58027-11
| Littelfuse Inc | Cole Hersee 58027-11 sealed rocker switch is a DPDT momentary (On)-Off-(On) switch rated 15A at 24VDC. It features a black rectangular actuator, no illumination, IP66 water resistance, and (6) 1/4" blade terminals for heavy-duty panel switching. | 1 : $24.62
10 : $21.98
50 : $20.22
100 : $19.45
200 : $18.9
500 : $18.35
|
| 186
|
2715
| Blue Sea Systems | Busbar Cover for 2301 & 2303 ( 78250 & 78252 ) **RETAIL** | | 106
|
2713
| Blue Sea Systems | Busbar Cover for 2304 & 2305 ( 78255 & 78256 ) **RETAIL** | | 106
|
776427-1
| TE Connectivity | AmpSeal 16, 2 Position Plug Assembly, Key A
RoHS : Compliant | 1 : $2.4424
10 : $2.272
20 : $2.1738
50 : $2.0493
100 : $1.7686
200 : $1.6563
|
| 84
|
22715-00
| Eaton Electronics | 15 AMP Circuit Breaker Blue Low Profile Blade Mount | 1 : $7.3
10 : $6.67
50 : $6.17
100 : $5.45
200 : $5.14
500 : $4.93
|
| 27
|
2711A
| Marinco Electrical Group | Guest On-Board Battery Charger 10A 2 Battery Banks 12/24V | 1 : $252.05
5 : $243.05
10 : $233.02
25 : $221.01
|
| 16
|
2710A
| Marinco Electrical Group | Guest On-Board Battery Charger 10A 1 Battery Bank 12/24V | 1 : $165.83
5 : $159.62
10 : $154.21
25 : $146.5
|
| 1
|
Portuguese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Polish
Vietnamese
Indian
Mexican
British
New Zealand