2027FGG-R Price, Revenda, Stock

Circular Connector - Receptacle - Male Pins - 14 Position - Shell Size-Insert 20-27 - Threaded - Solder Cup Termination - Panel Mount.
RoHS : Not Compliant

500 : $16.56
250 : $16.6
100 : $16.64
50 : $19.67
25 : $22.88
10 : $27.38
5 : $34.01

PW20-27K5

TT Electronics Resistors

RoHS : Compliant

7,500 : $0.633
5,000 : $0.635
2,500 : $0.643
1,000 : $0.656
500 : $0.67
250 : $0.686
25 : $0.767
1 : $0.8437

MTSW-120-27-G-Q-740

Samtec Inc

.100 Variable Post Height Terminal Strip
RoHS : Compliant

5,000 : $2.6
2,500 : $2.67
1,000 : $3.4
500 : $4.21
250 : $4.97
100 : $5.19
25 : $6.05
5 : $7.21

MTSW-120-27-L-S-1120

Samtec Inc

RoHS : Compliant

7,500 : $1.1
5,000 : $1.13
2,500 : $1.41
1,000 : $1.64
500 : $1.87
250 : $1.93
100 : $2.02
10 : $2.48

MTSW-120-27-T-D-100

Samtec Inc

.100 Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $1.18
5,000 : $1.21
2,500 : $1.49
1,000 : $1.9
500 : $2.24
250 : $2.52
50 : $2.73
10 : $3.25

ACS08R20-27S(003)

Amphenol Industrial Operations

Circular Connector - Plug - Female Sockets - 14 Position - Shell Size-Insert 20-27 - Threaded - Solder Cup Termination - Cable Mount Right Angle.
RoHS : Compliant

25 : $58.88
19 : $60.09
13 : $73.96
7 : $111.6
5 : $113.3
1 : $115.03

216759-2027

Molex

Molex 216759-2027 Rectangular Cable Assemblies 2Pin Guardian St Pigtail 6 AWG 2M
RoHS : Compliant

50 : $162.02
8 : $178.21
4 : $181.47
2 : $184.71
1 : $187.94

FJH-15-R-20.27-4

Samtec Inc

FLAT FLEXIBLE CABLE JUMPE
RoHS : Compliant

1,000 : $3.92
500 : $4.76
250 : $5.26
100 : $5.5
50 : $7.6
25 : $7.96
5 : $8.78

HTSW-120-27-G-T

Samtec Inc

RoHS : Compliant

1,000 : $4.85
500 : $6.32
250 : $6.86
100 : $7.26
50 : $9.81
25 : $10.27
5 : $11.33

INSUL-ASSY-FVF-20-27S

ITT Interconnect Solutions

INSUL ASSY FVF 20-27S; MIL-DTL 5015 Firewall; Circ
RoHS : Compliant

25 : $223.8
19 : $228.36
13 : $316.19
7 : $554.59

INSUL-CA-KE20-27S-RR

ITT Interconnect Solutions

Connector INSUL Assembly
RoHS : Compliant

25 : $129.44
19 : $132.08
13 : $182.88
7 : $320.76
5 : $321.57
1 : $322.37

2027-15-B10LF

Bourns Inc

Gas Discharge Tubes 150VDC 10kADC 10AAC 1pF Radial Thru-Hole
RoHS : Compliant

1,000 : $0.693
750 : $0.707
500 : $0.757
250 : $1.01

2027038-1

TE Connectivity

Misc Product MOQ Reduction
RoHS : Compliant

480 : $2.4
360 : $2.45
240 : $2.62
120 : $3.5

2027234-3

TE Connectivity

T9EV1L14-12 MOQ Reduction
RoHS : Compliant

500 : $6.09
375 : $6.22
250 : $7.86
125 : $12.77

1620274

Phoenix Contact

Cable connector - CA - angled - shielded: yes - Screw locking - M23 - No. of pos.: 16 - type of contact: Pin - Solder connection - cable diameter range: 4 mm ... 6 mm
RoHS : Compliant

5 : $69.33
1 : $72.98

Pasternack Enterprises US

PE3W02027/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Low Loss Cable Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male right angle to TNC male low loss cable using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male low loss cable using LMR-240-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and TNC cable connection on the other. Our low loss right angle type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02027/HS can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W02027/HS is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02027/HS can also be used in the other direction and will be TNC male to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male low loss cable using LMR-240-DB coax with heatshrink.

8,010

PE3W02027/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to TNC Male Low Loss Cable 12 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male right angle to TNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and TNC cable connection on the other. Our low loss right angle type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02027/HS-12 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W02027/HS-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02027/HS-12 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink.

1 : $199.99
25 : $189.99
50 : $179.99
100 : $171.99

1,602

PE3W02027/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to TNC Male Low Loss Cable 36 Inch Length Using LMR-240-DB Coax with HeatShrink., Radio frequency assembly N male right angle to TNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and TNC cable connection on the other. Our low loss right angle type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02027/HS-36 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W02027/HS-36 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02027/HS-36 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink.

1 : $196.99
25 : $187.14
50 : $177.29
100 : $169.41

1,602

PE88X2027

Pasternack Enterprises

Key Specifications, Input Frequency, Min: 9 MHz, Input Frequency, Max: 14.5 MHz, Output Frequency, Min: 18 MHz, Output Frequency, Max: 29 MHz, Input VSWR, Max: 2, Output VSWR, MAX: 2.7. 2x Active Frequency Multiplier, 18 GHz to 29 GHz Output Frequency, 12.0 dB Conversion Gain, SMA. RF frequency multiplier (also referred to as a frequency doubler) PE88X2027 from Pasternack has SMA connectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 9 GHz and a maximum frequency input of 14.5 GHz. This SMA microwave frequency multiplier/doubler output minimum frequency is 18 GHz and output maximum frequency of 29 GHz. Our active 2x frequency multiplier can operate at temperatures ranging from -40 to +85 deg C and has a maximum VSWR of 2:1. Make your online purchase right now to take advantage of our same-day shipping. This active 2x frequency multiplier is powered by DC voltage ranging from 9 to 15 Vdc with 110 mA of DC current. Our 50 Ohm frequency multiplier has an input threaded SMA female connector and output 2.92mm female connector. This active frequency multiplier is suitable for aerospace & defense, test & measurement, microwave radio systems, military & commercial communication systems, research & development, SATCOM and wireless communications applications. Our SMA female multiplier comes with a 50 Ohm impedance and a max input power rating (CW) of 6 dBm. The active 2x frequency multiplier has a typical fundamental isolation of 20 dB. Our active 2x frequency multiplier has a storage temperature ranging from -55 to +105 deg C. Our active 2x frequency multiplier has a typical phase noise of -132 dBc/Hz at 100kHz offset. This 6 dBm active frequency multiplier has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our active 2x frequency multiplier has a typical conversion gain of 12 dB. Additional dimensions and specifications for this active 2x frequency multiplier are on our downloadable PDF datasheet above. SMA frequency doubler/multiplier PE88X2027 from Pasternack is rated for a 6 dBm and is just one part of over 40,000 RF, microwave, and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock. Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. For further information on similar products, our expert technical support and trained sales team can get you to the ideal active 2x frequency multiplier as per your requirements.

1 : $1,600.0
5 : $1,536.0
10 : $1,472.0
25 : $1,408.0

PE3W20273

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to 10KV Female Bulkhead Cable Using RG58 Coax. PE3W20273 is a 1.0/2.3 plug to 10KV female bulkhead cable using RG58 coax. This Pasternack 1.0/2.3 plug to 10KV female bulkhead cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10KV for connector 2. Our plug 1.0/2.3 to female 10KV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20273 1.0/2.3 plug to 10KV female bulkhead cable assembly is constructed with RG58 coax.

PE3W02027LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male to N Male Right Angle Cable Using LMR-240-DB Coax with HeatShrink, LF Solder. PE3W02027LF/HS is a TNC male to N male right angle cable using LMR-240-DB coax. This Pasternack TNC male to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02027LF/HS TNC male to N male right angle cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20278

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMA Female Cable Using LMR-100A-UF Coax. PE3W20278 is a BNC male right angle to SMA female cable using LMR-100A-UF coax. This Pasternack BNC male right angle to SMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20278 BNC male right angle to SMA female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20276

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-400-LLPX Coax. PE3W20276 is a N male right angle to N male cable using LMR-400-LLPX coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20276 N male right angle to N male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20274

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm. 2.92mm Male to 2.92mm Female Cable Using PE-034SR Coax. PE3W20274 is a 2.92mm male to 2.92mm female cable using PE-034SR coax. This Pasternack 2.92mm male to 2.92mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male 2.92mm to female 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20274 2.92mm male to 2.92mm female cable assembly is constructed with PE-034SR coax.

PE3W20272LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using PE-047SR Coax, LF Solder. PE3W20272LF is a SMA female bulkhead to SMA female bulkhead cable using PE-047SR coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20272LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with PE-047SR coax.

PE3W22027

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male to N Female Cable Using LMR-100A-UF Coax. PE3W22027 is a SMA male to N female cable using LMR-100A-UF coax. This Pasternack SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22027 SMA male to N female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2027/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to FAKRA Jack Cable Using LMR-100 Coax with HeatShrink. PE3C2027/HS is a FAKRA jack to FAKRA jack cable using LMR-100A coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2027/HS FAKRA jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2027LF

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to FAKRA Jack Cable Using LMR-100 Coax, LF Solder. PE3C2027LF is a FAKRA jack to FAKRA jack cable using LMR-100A coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2027LF FAKRA jack to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02027LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male to N Male Right Angle Cable Using LMR-240-DB Coax, LF Solder. PE3W02027LF is a TNC male to N male right angle cable using LMR-240-DB coax. This Pasternack TNC male to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02027LF TNC male to N male right angle cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20271

Pasternack Enterprises

Key Specifications, Connector Series 1: 10KV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. 10KV Male to SHV Plug Right Angle Cable Using RG303 Coax. PE3W20271 is a 10KV male to SHV plug right angle cable using RG303 coax. This Pasternack 10KV male to SHV plug right angle cable assembly uses a 50 Ohm 10KV for connector 1 and a 50 Ohm SHV for connector 2. 10KV to SHV right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10KV to plug SHV right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20271 10KV male to SHV plug right angle cable assembly is constructed with RG303 coax.

Venkel Ltd.

SSPI474720-270NU

VENKEL LTD

Square Shielded Power Inductor;474720;27uH;�30%
RoHS : Not Compliant

SSPI575720-270NU

VENKEL LTD

Square Shielded Power Inductor;575720;27uH;�30%
RoHS : Not Compliant

SSPI383820-270NU

VENKEL LTD

Square Shielded Power Inductor;383820;27uH;�30%
RoHS : Not Compliant

Waytek, Inc.

7100020270

3M FP301-3/8-200' heat shrink tubing is black 3/8" thin-wall polyolefin on a 200' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where larger diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed.

200 : $1.254
1,000 : $1.1521

2,600